Engineering Commons^™

Design, Fabrication, And Application Of Uniformly Distributed Rc Networks For Use In Electronic Circuits, Michael Flynn Kavanaugh

Doctoral Dissertations

"In the design of electronic circuits, both linear and non-linear, one of the goals is the reduction of the number of elements needed to complete the design. By using distributed RC networks a reduction in the number of elements by at least 50% is usually possible. This dissertation discusses several distributed RC networks, develops detailed design procedures for each, and applies them in the design of electronic circuits.

The indefinite admittance matrix (IAM) for the DRURC (double-resistive uniformly distributed RC network) and the URC (single-resistive uniformly distributed RC network) , which have been previously derived, are used as the starting …

Problem Oriented Teaching, Concept And Implementation, Beat Victor

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Committee For Relations With Industry - Its Role In The Training Of Engineers, A Shayo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Frontal Instruction Or Group Work, Hans Wagner

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Books To Make Electronics Easy, P Mynott

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Fate Of The Developing Economies, F Mtalo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

New Directions In Engineering Communications, H Mckague

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Development Of The Faculty Of Engineering, Udsm, W Kreuser

Tanzania Journal of Engineering and Technology (TJET)

Although gome of the buildings have not yet been completed, the Faculty has already moved into the new premises. The training workshops where all students spend nearly 5$ of their time during the first year of the undergraduate course are in full owing 'Ince 1973, the first laboratorleg will be ready for operation early 1975. The admi'ßion of students to the four years undergraduate eourøe and the distribution to the departments are represented on the table below.

Technology As General Subject In The Tanzanian Education, A Kanyilili

Tanzania Journal of Engineering and Technology (TJET)

There is no Coubt in Tango-nia tc-'d?.y that wc have accepted as T22tte-r• of policy thc need to el.1ÜhT.size Technology in our (Sce Ilycrcre: -Education for Self—Reliance, education system. Mn,rch 1974; Qanu Directive on Snall Scale Industries, M T.rch 1973 and Resolution 29 of the 16th Party Conference, October 1973) • In spite of all. thcsc ?ronounecnents, howcver, it Is very saa to note that there • very stroma doubt as to whether our education rnd nonpower planners, ond the policy nakers themselves are fully awn.rc of thc corn-plexities orecml— zation required to run a vinyl c, successful TechnolchUca11y based …

Dissemination Of Appropriate Technologies, H Dickinson

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Practical Training Of Students At The Faculty Of Engineering, Udsm, G Roesch

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Tanesco's Protection Department, A Fernandes

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Technician From The Dar Es Salaam Technical College, C Abayo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Role Of Sido As A Link Between Technical Research At The University And Introduction Df New Techniques In Rural Areas, Sido Sido

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

An Evaluation Of Four Data Reconstruction Techniques Applied To Seismometer Data., Stephen Frank Pickett

Electrical and Computer Engineering ETDs

Four methods of data reconstruction were applied to actual seismometer data with inherent low frequency linear distortion, for relative evaluation and comparison. An electronic system inverse circuit, an impulse invariant Z transform inverse system model, time domain decon­volution, and fast Fourier transforms were the methods used. It was found that from the standpoints of ease of application, computer core and CPU requirements, and reconstruction quality, the electronic inverse circuit and time domain deconvolution would probably be the reconstruction options favored by most seismometer users. Of these two methods, time domain deconvolution exhibited slightly better reconstruction quality than did the inverse …

Dependence Of The Electronic Transition Moment On Internuclear Separation In Na2: A Quantum Mechanical Treatment, P. F. Williams, D. L. Rousseau

P. F. (Paul Frazer) Williams Publications

We present a quantum mechanical treatment of laser-induced atomic fluorescence from molecular sodium. It is shown that such fluorescence data may be analyzed with an ν-centroid approximation and an accurate determination of the electronic transition moment may be made.

Discrete And Diffuse Emission Following Two-Photon Excitation Of The E State In Molecular Iodine, D. L. Rousseau, P. F. Williams

P. F. (Paul Frazer) Williams Publications

We studied the fluorescence spectrum of E →B transitions in molecular iodine following two-photon absorption. Discrete re-emission lines terminating in B-state levels ranging from ν = 0 to the dissociation limit were observed in addition to a series of broad diffuse lines. These diffuse lines represent the first observation of Condon "internal diffraction” resulting from a single vibronic state, and therefore the variation of the bands directly displays the variation of the Franck-Condon factor.

National Vocational Training Programme, A Atchman

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Designing Hmo, An Integrated Hardware Microcode Optimizer, James O. Bondi, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

This Paper Discusses an Algorithm for Optimizing the Density and Parallelism of Micro coded Routines in Micro programmable Machines. Besides the Algorithm itself, the Algorithm's Uses, Design Integration Problems, Architectural Requirements, and Adaptability to Conventional Machine Characteristics Are Also Discussed and Analyzed. Even Though the Paper Proposes a Hardware Implementation of the Algorithm, the Algorithm is Viewed as an Integral Part of the Entire Microcode Generation and Usage Process, from Initial High-Level Input into a Software Microcode Compiler Down to Machine-Level Execution of the Resultant Microcode on the Host Machine. It is Believed that, by Removing Much of the Traditionally …

Stability And Synthesis Of Two Dimensional Digital Recursive Filters, Winser Edward Alexander

Electrical and Computer Engineering ETDs

This dissertation presents an analytical investigation of the requirements for stability of two dimensional digital recursive filters and the development of a new procedure which can be used to synthesize low pass digital recursive filters with approximately circularly symmetric squared magnitude characteristics.

A new approach to stability analysis of two dimensional digital recursive filters is presented. A matrix recursive equation corresponding to the recursive algorithm for the two dimensional digital recursive filter is defined. This matrix recursive equation is used to formulate necessary conditions for stability of the two dimensional digital recursive filter in terms of the magnitudes of the …

Self-Consistent Dielectric Response Of A Quasi-One-Dimensional Metal At High Frequencies, P. F. Williams, Aaron N. Bloch

P. F. (Paul Frazer) Williams Publications

We present the results of a calculation of the frequency- and wave-vector-dependent longitudinal dielectric function of a quasi-one-dimensional electron gas. The electrons are taken to be localized to the chains and both the tight-binding and free-electron extremes are considered along the chain axis. Local-field effects are included. Dispersion curves for plasmons and single-particle-excitation spectra are presented. We find that the plasmon modes are not Landau damped and that for long wavelengths these modes have eigenfrequencies ranging continuously from the usual three-dimensional plasma frequency for propagation along the chain axis to zero for propagation perpendicular to it. Finally, we discuss the …

Optical Excitation Of Plasmons In A Quasi-One-Dimensional Conductor, P. F. Williams, M. A. Butler, D. L. Rousseau

P. F. (Paul Frazer) Williams Publications

We have carefully determined the optical spectrum of K₂Pt(CN) ₄Br_0.3 - 3H₂O near the reflectivity edge. Our data reveal, in addition to the expected monotonic background, a broad peak in ε₂ (ω) above a threshold coinciding with the zero of ε₁ (ω) near 16000 cm^-1. We assign this band to indirect excitation of plasmons. Details of the excitation of plasmons are discussed with particular attention being paid to the problems presented by the one-dimensional character of the material. It is concluded that the electronic structure of this material cannot be …

Analytical State Assignment For Synchronous Sequential Machines., Min-Hung Chao

Electrical and Computer Engineering ETDs

An algorithm is proposed that solves the internal state assignment, input state assignment, and output circuit simplification problems of synchronous sequential machines. With few modifications, it can be applied to machines using various type of memory elements and is capable of solving the state assignment problems of large sequential machines.

The algorithm is first presented in a form for use on machines realized with D-type flip-flops; it is then genera­lized so that it can be applied to machines using trigger, S-R, or J-K flip-flops directly.

The features of merit in a state table that could be used to obtain internal …

A Biquadratic Realization Using A Distributed-Lumped-Active Rc Network., James Lee Jorgensen

Electrical and Computer Engineering ETDs

A common method used to realize high-order active filters is to cascade second-order (biquadratic) and first-order filter sections, to achieve the desired voltage transfer function. First-order sections are easily realized by simple passive sections; the basic building block in this method is, therefore, a network that realizes a general biquadratic voltage transfer function (BVTF).

The Theory Of Multiple Measurements Techniques In Distributed Parameter Systems, Babajimi Claudius Okunseinde

Dissertations

A comprehensive theory of multiple measurements for the optimum on-line state estimation and parameter identification in a class of noisy, dynamic distributed systems, is developed in this study. Often in practical monitoring and control problems, accurate measurements of a critical variable are not available in a desired form or at a desired sampling rate. Rather, noisy independent measurements of related forms of the variable may be available at different sampling rates. Multiple measurements theory thus involves the optimum weighting and combination of different types of available measurements. One of the contributions of this work is the development of a unique …

Electronic Color Scanners, Kenneth Francis Hird

Graduate Research Papers

Process color photography has been continually developing for many years. In fact, color printing techniques are still benefiting, through additional sophisticated requirements, and from a discovery made about 300 years ago. At that time Sir Isaac Newton, British scientist, mathematician • and philosopher, placed a glass prism in the path of a narrow beam of sunlight entering his room through a pinhole in an opaque window shade. He determined that ordinary white light is a mixture of colored lights.

Unfortunately, in practice, ideal pigments for three-color inks do not exist and this impasse greatly complicates the job for the photo-processor. …

Synthetically-Generated Holographic Memory System Utilizing Partially Coherent Light, William A. Barrett

Dissertations

This dissertation proposes a novel form of optical ROM for the digital computer. This memory makes use of holographic techniques because of the advantages offered by holographic memories over conventional optical ones, especially with regard to dust and scratch sensitivity.

These advantages have long been recognized by workers in the field, indeed several holographic optical memories have already been proposed.

A survey of the state of the art of digital computer memories is offered in the introductory part of the thesis. Particular emphasis is placed on optical memories. A brief review of basic holographic theory is also included for reference. …

Steady State And Dynamic Performance Of Anisotropic Reluctance Motor, S. Chandrasekhara Rao

Theses

The paper deals with a special type of reluctance motor called Anisotropic rotor reluctance motor. As the name implies, advantage is taken of the internal anisotropy of the rotor magnetic structure. Axially laminated grain oriented silicon steel is used in the rotor. This unconventional configuration of assembly of rotor laminations results in a high ratio of direct axis to quadrature axis reluctance. Compared to the conventional reluctance motor, pull out torque of more than three times and a power factor as high as in an induction motor is obtained. Several motors of ratings up to 60 HP. were built and …

The Digital Multifunction Power Measuring System, Ralph Warren Shoemaker

Dissertations and Theses

The Digital Multifunction Power Measuring System is the outgrowth of a project involving the design of a prototype precision Digital Watt Transducer for the Bonneville Power Administration (BPA). A prototype Digital Watt Transducer was built and tested since no other device of the desired accuracy was commercially available. Upon partial completion of the project, another Watt Transducer did become available which was essentially identical to our development. Since we could not economically compete with the manufacturer of these Watt Transducers, our project was stopped. Over a period of several months we thought about other ways to apply the experience gained …

Use Of A Micro-Computer In A Missile Simulator, James A. Rose, James V. Leonard, Herbert A. Crosby

Electrical and Computer Engineering Faculty Research & Creative Works

In 1971 McDonnell-Douglas was awarded a contract for a new missile system. The missile power, discrete command/ response, and digital systems were described with emphasis on the digital data format, error detection and timing. A missile simulator, the S/TS, was briefly described showing how the shortcomings of a previous simulator were eliminated. A listing of the S/TS design criteria was given, and the design logic based on utilization of a micro-computer was described.