Engineering Commons^™

Mathematical Models And Calculation Of Parameters Of Optoelectronic Angular Displacement Converters, Yuriy Gennadyevich Shipulin, Azimjon Khusanov

Chemical Technology, Control and Management

The article discusses promising optoelectronic converters (OP) for wide application of angular movements. A methodology and diagram for calculating OP with the transverse movement of a moving element is presented; in order to simplify the calculation, the weight range of angular movements is conventionally divided into three sub ranges. A graph is given of the dependence of the area of the photosensitive surface of a photo resistor made from a single crystal of high-resistivity p-type silicon.

The Use Of Ultraviolet Radiation As A Means Of Destroying Microorganisms In Cherries, Jasur Safarov, Shaxnoza Sultanova, Pulatov M. Murodjon

Chemical Technology, Control and Management

The article discusses methods for extending the shelf life of cherries, having previously treated it with an ultraviolet ray. The article also presents the results obtained, which prove that the shelf life of cherries exposed to ultraviolet increases. At the same time, the article describes in detail the processing technique and presents the results of research.

Study Of Dynamic Characteristics Of The Mechanical Circuit Of The Developed Induction Inertial Vibration Transducer, Sulton Fayzullayevich Amirov, Asror Abdunabiyevich Shoimkulov

Chemical Technology, Control and Management

The article examines the dynamic characteristics of the mechanical circuit of the developed induction vibration transducer. It is found that in the investigated transducers forced oscillations occur with the frequency of the input disturbing force, the amplitude of forced oscillations does not depend on the initial conditions and time, and in forced oscillations with damping there is always a shift of the oscillation phase compared to the phase of the input disturbing force. It is shown that the induction vibration transducer reproduces the measured vibrations with small distortions only in a relatively narrow frequency region at frequencies of the input …

Smart System For Wheat Diseases Early Detection, Rustam Baratov, Himola Sunnatillayeva, Almardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This paper presents a smart system for early detection of wheat plant diseases in the vegetation period. The proposed smart system allows detecting three types of wheat diseases, particularly yellow rust, powdery mildew and septoria at early stage and significantly improves the soil and ecology by locally spraying harmful chemicals just to sickness plants. The proposed diagnostic program is created in the C++ programming language. The basic structure of the smart system consists of Raspberry PI 4 MODULE, Logitech HD Pro Webcam C920, buzzer, HC-SR04 distance sensor, DC motor driver, AC motor, power supply, relay and some digital devices.

Application Of Quantum Algorithms In The Synthesis Of Dynamic Objects, Noilakhon Yakubova

Chemical Technology, Control and Management

Around the world, the food industry is focusing on achieving energy and resource efficiency. One of the main challenges in the field of process automation is the creation of effective control systems using intelligent technologies to improve the quality of processes and achieve the production of high-quality products with less energy and resources. Therefore, it is necessary to work with a large amount of data. Particular attention is paid to the development of computational algorithms for automated high-speed computational analysis systems for processing this data at high speed. Therefore, the article discusses the use of quantum computing methods in controlling …

System For Advanced Control Of Thermal Parameters Of Glass Furnaces, O'Tkir Xolmanov

Chemical Technology, Control and Management

The results of an analysis of the functioning of glass furnaces for melting semi-white or discolored glass as an object of automatic control and management are presented. Through experimental research, a parametric control scheme for a glass melting furnace was formed and a system for improved control of thermal glass melting processes was synthesized. The proposed system regulates the parameters of a furnace with a horseshoe-shaped flame development. Based on commercially produced instruments and automation equipment that ensure stabilization of thermal conditions of glass melting. The burner block control algorithm provides control over the performance of the gas burner, safety …

Intelligent Decision Support System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The article studies issues related to the development of intelligent systems located in an environment capable of perceiving this environment and acting autonomously to achieve assigned tasks. To create an intelligent process control system, it is necessary to monitor the mode to ensure high quality of finished products with minimal energy consumption at a given productivity of the entire complex. It is important to have a flow of input data to provide the system with operational information to support decision making.

The proposed intelligent control system makes it possible to analyze the results of production activities to make organizational and …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

Estimating And Detecting Slow-Wave Events In Eeg Signals, Zhenghao Xiong

McKelvey School of Engineering Graduate Student Theses & Dissertations

Slow wave activity (SWA) is an electroencephalogram (EEG) pattern commonly occurring during anesthesia and deep sleep, and is hence a candidate biomarker to quantify such states and understand their connection to various phenotypes. SWA consists of individual slow waves (ISW), high-amplitude deflections lasting for approximately 0.5 to 1 second, and occurring quasi-periodically. This latter fact poses a challenge for conventional power spectral density EEG analysis methods that perform best when there is persistency of oscillatory activity. In this work, we pursue a time-domain detection framework for identifying and quantifying ISWs as a metric for SWA. Our method works, in essence, …

Improved Brain-Storm Optimizer For Disassembly Line Balancing Problems Considering Hazardous Components And Task Switching Time, Ziyan Zhao, Pengkai Xiao, Jiacun Wang, Shixin Liu, Xiwang Guo, Shujin Qin, Ying Tang

Henry M. Rowan College of Engineering Departmental Research

Disassembling discarded electrical products plays a crucial role in product recycling, contributing to resource conservation and environmental protection. While disassembly lines are progressively transitioning to automation, manual or human–robot collaborative approaches still involve numerous workers dealing with hazardous disassembly tasks. In such scenarios, achieving a balance between low risk and high revenue becomes pivotal in decision making for disassembly line balancing, determining the optimal assignment of tasks to workstations. This paper tackles a new disassembly line balancing problem under the limitations of quantified penalties for hazardous component disassembly and the switching time between adjacent tasks. The objective function is to …

Energy Efficiency And Fault Tolerance In Open Ran And Future Internet, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open Radio Access Networks (Open RAN) repre- sent a promising technological advancement within the realm of the future internet. Research efforts are currently directed towards enhancing energy efficiency and fault tolerance, which are critical aspects for both Open RAN and the future internet landscape. In the context of energy saving in Open RAN, there exists a spectrum of methods for achieving energy efficiency. These methods include the toggling of on/off states for different hardware resources such as base station units, distributed units, and radio units. Conversely, for enhancing fault tolerance in Open RAN, Software-Defined Networking (SDN) and OpenFlow based techniques …

Improving Energy Efficiency In Open Ran Through Dynamic Cpu Scheduling, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open RAN is a promising cellular technology that is currently undergoing extensive research for future wireless radio access networks. Achieving optimal energy efficiency in Open RAN poses a significant challenge. This paper introduces a CPU scheduling algorithm that specifically targets this chal- lenge by optimizing energy consumption at the base station while maintaining optimal performance levels. With the goal of minimizing energy consumption, the proposed algorithm dynamically adjusts the CPU core states, seamlessly switching between active and sleep modes based on the load conditions. To evaluate the algorithm’s effectiveness in terms of energy saving and performance, experimental testing is conducted …

Cost Minimization For Charging Electric Bus Fleets, Daniel Mortensen, Jacob Gunther, Greg Droge, Justin Whitaker

Electrical and Computer Engineering Student Research

Recent attention for reduced carbon emissions has pushed transit authorities to adopt battery electric buses (BEBs). One challenge experienced by BEB users is extended charge times, which create logistical challenges and may force BEBs to charge when energy is more expensive. Furthermore, BEB charging leads to high power demands, which can significantly increase monthly power costs and may push the electrical infrastructure beyond its present capacity, requiring expensive upgrades. This work presents a novel method for minimizing the monthly cost of BEB charging while meeting bus route constraints. This method extends previous work by incorporating a more novel cost model, …

Control Of Fully-Actuated Aerial Manipulators And Omni-Directional Multirotors, Riley M. Mccarthy

Mechanical Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and
testing of both a fully-actuated and omni-directional multirotor aerial system created
for the primary purpose of performing active tasks with their environment. This work
verifies the capabilities of both systems through empirical testing, and demonstrates
how through the use of new control methods and physical designs multirotors can
expand their purpose from passive inspection based tasks to active contact based
tasks. These systems take advantage of newly implemented control allocation features present in the PX4 flight control software, version 1.14. The use of which makes designing controllers for such …

Location Aware Task Offloading Framework For Edge Computing Empowered By Reconfigurable Intelligent Surfaces, Md Sahabul Hossain

Electrical and Computer Engineering ETDs

In this thesis, an energy efficient task offloading mechanism in a multi-access edge computing (MEC) environment is introduced, based on the principles of Contract Theory. The technology of Reconfigurable Intelligent Surfaces (RIS) is adopted and serves as the enabler for the energy efficient task offloading, from the perspective of location-awareness and improved communication environment. Initially a novel positioning, navigation, and timing solution is designed, based on the RIS technology and an artificial intelligent method that selects a set of RISs to perform the multilateration technique and determine the Internet of Things (IoT) nodes’ positions in an efficient and accurate manner …

Design And Fabrication Of A Low Power 7.2 Terabit Transmitter For Exascale Computing, Scott Mcwilliams

Electrical Engineering Theses and Dissertations

Enhanced Coupled Strength (ECS) gratings fabricated into III-V based devices offer high reflected power per unit length and broad band reflectivity as compared to conventional 1st order gratings, desired qualities for short-haul high speed transmitters that can be implemented without the need for chip-level temperature control, contributing to the low power per transmitted bit. For commercial DBR lasers, the grating reflectivity results in an extremely narrow reflectivity spectrum, which is highly desired for most/many applications, but requires a power hungry thermo-electric cooler to maintain a fixed frequency. The proposed LEAM (laser electro-absorption modulator) requires a broad reflectivity spectrum, which, by …

Series Aperture Coupled Fed Phased Array Antenna, Guang Yang

Electrical Engineering Theses and Dissertations

Phased arrays are employed in a wide range of civil and Military contexts, including RADAR, cellular communications, and satellite communications. However, modern phased-array antennas require complex design and bulky structure at high costs, hindering their implementation in many applications. The critical aspect of a phased array design lies in power splitting with a proper phase to each radiating element. Conventional power splitters such as quarter-wavelength or Wilkinson power splitters suffer problems associated with complex array network and high power dissipation. Furthermore, popular phase shifters such as MEMS switch, ferrite-based or PIN diode have drawbacks of low power-handling capability, expensive packaging, …

On The Integration Of Hydrogen Into Integrated Energy Systems: Reliability Assessment And Optimal Operation And Planning, Tao Wu

Electrical Engineering Theses and Dissertations

Hydrogen, regarded as one of the cleanest energy carriers, is gaining momentum to support the realization of net-zero emissions integrated energy systems due to its versatile applications across various energy sectors. In the near-term, blending hydrogen into integrated energy systems offers opportunities to promote hydrogen integration considering the current high levelized cost of hydrogen. However, because of the different physical properties of hydrogen, the impact of hydrogen on the reliability and optimal operation of integrated energy systems should be investigated to maximize the share of hydrogen without degrading the functionality of integrated energy systems. In the long-term, the optimal planning …

Quantum And Classical Learning Algorithms For Grid Integration Of Energy Storage And Renewables: Operation, Modelling, And Planning, Bin Huang

Electrical Engineering Theses and Dissertations

With the pressing net-zero objectives, renewable energy sources (RESs) and energy storage systems (ESSs), which serve as the main force in providing low-carbon energy and flexibility, are being integrated into the power systems at an unprecedented rate. The rising penetration trend of RESs and ESSs brings both opportunities and challenges. In the short term, the inherent intermittency of RESs and high capital costs of ESSs introduce obstacles to revenue maximization for hybrid power plants and complicate the provision of privacy-ensured, high-fidelity network modeling. Long-term planning faces the hurdle of expanding ESS capacity in microgrids while maintaining power supply resilience with …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

A Symbiotic Content Caching Approach In Next-Generation Information-Centric Networks Based On Game Theory, Aisha B Rahman

Electrical and Computer Engineering ETDs

The continuous growth of mobile data traffic with strict time requirements calls for the development of sustainable edge content caching solutions. This becomes more prominent in the setting of Information-Centric Networking (ICN) architectures, where different ICNs are leasing caching slices to the available content providers (CPs), who in turn offer their services to the users. In this thesis, we introduce a novel symbiotic content caching framework that provides the necessary economic benefits to the ICNs and the CPs to mutualistically collaborate among each other. The corresponding mutualistic interactions among the ICNs and CPs are studied under the prism of two …

A Bio-Inspired Alternative Positioning, Navigation, And Timing Approach Based On A Potential Game-Theoretic Model, Md Sadman Siraj

Electrical and Computer Engineering ETDs

This thesis addresses the challenge of designing of alternative Positioning, Navigation, and Timing (PNT) solutions. Inspired by the evolution of biological ecosystems, we introduce a novel symbiotic PNT solution, based on the principles of Game Theory and the exploitation of Reconfigurable Intelligent Surfaces (RISs). A set of actors, consisting of anchor nodes and RISs with known coordinates, collaborator nodes having a rough estimate of their positions, and targets of unknown positions, are cooperating to accurately determine the targets’ positioning and timing. The key objective is to minimize the estimation error of each target and collaborator node, as well as of …

Solar-Powered Microgrids In Northern California: An Opportunity For Resilience, Marina Riddle

Master's Projects and Capstones

Planned and unplanned power outages have been increasing in frequency and duration, negatively impacting all public sectors, and threatening public safety. These outages are deadly to those who rely on medical devices. As climate change-fueled extreme weather events (wildfires, earthquakes, storms, etc.) also increase in frequency, our electrical grid must be prepared to bounce back. Microgrids provide necessary redundancy and reliability. Through a novel GIS suitability analysis, based on solar radiation, land use type, local energy demand, distance to transmission lines, distance to roads, and slope, optimal locations for solar-powered microgrids throughout Northern California were determined. The counties of Fresno, …

Terahertz Permittivity Parameters Of Monoclinic Single Crystal Lutetium Oxyorthosilicate, Sean Knight, Steffen Richter, Alexis Papamichail, Megan Stokey, Rafał Korlacki, Vallery Stanishev, Philipp Kühne, Mathias Schubert, Vanya Darakchieva

Department of Electrical and Computer Engineering: Faculty Publications

The anisotropic permittivity parameters of monoclinic single crystal lutetium oxyorthosilicate, Lu₂SiO₅ (LSO), have been determined in the terahertz spectral range. Using terahertz generalized spectroscopic ellipsometry (THz-GSE), we obtained the THz permittivities along the a, b, and c^⋆ crystal directions, which correspond to the ε_a; ε_b, and ε_c? on-diagonal tensor elements. The associated off diagonal tensor element ε_ac? was also determined experimentally, which is required to describe LSO’s optical response in the monoclinic a–c crystallographic plane. From the four tensor elements obtained in the model fit, we calculate the …

Monitoring Time Domain Characteristics Of Parkinson's Disease Using 3d Memristive Neuromorphic System, Md Abu Bakr Siddique, Yan Zhang, Hongyu An

Michigan Tech Publications

INTRODUCTION: Parkinson's disease (PD) is a neurodegenerative disorder affecting millions of patients. Closed-Loop Deep Brain Stimulation (CL-DBS) is a therapy that can alleviate the symptoms of PD. The CL-DBS system consists of an electrode sending electrical stimulation signals to a specific region of the brain and a battery-powered stimulator implanted in the chest. The electrical stimuli in CL-DBS systems need to be adjusted in real-time in accordance with the state of PD symptoms. Therefore, fast and precise monitoring of PD symptoms is a critical function for CL-DBS systems. However, the current CL-DBS techniques suffer from high computational demands for real-time …

Route Condition Estimation By Video Data Analysis, Sharafat Hossain

Theses and Dissertations

Catastrophic natural disasters have an impact on millions of individuals each year, whether directly or indirectly. A successful rescue operation can save a great deal of lives in the post-disaster phase, but researchers are still facing difficulties in carrying this out. Even while they are in peril, today's people frequently post updates about their whereabouts on well-known social media platforms, sometimes even asking for help. A prompt and appropriate response to these catastrophic events depends on developing an efficient and automated approach capable of retrieving real-time data from impacted locations and extracting essential elements. The research focuses on predicting flood …