Engineering Commons^™

Near-Band-Edge Photoluminescence Of Wurtzite-Type Aln, E. Kuokstis, J. Zhang, Q. Fareed, J. W. Yang, Grigory Simin, M. Asif Khan, R. Gaska, M. Shur, C. Rojo, L. Schowalter

Faculty Publications

Temperature-dependentphotoluminescence(PL)measurements were performed for A-plane and C-plane bulk AlN single crystals and epitaxial layers on sapphire. A strong near-band-edge (NBE) emission and deep-level luminescence were observed. At low excitations, the emission spectra are dominated by free and bound excitonic transitions and their LO-phonon replicas. At high excitations, the broadening and redshift of the NBE band is attributed to dense electron–hole plasma formation. The PL spectra differences of bulk single crystals and epilayers is explained by the electron–hole plasma expansion peculiarities.

Self-Assembled Networks With Neural Computing Attributes, Supriyo Bandyopadhyay, L. Menon, N. Kouklin, P. F. Williams, Natale J. Ianno

P. F. (Paul Frazer) Williams Publications

Two-dimensional arrays of vertical quantum wire Esaki tunnel diodes, laterally connected to their nearest neighbors by resistive/capacitive connections, constitute a powerful and versatile neuromorphic architecture that can function as classical Boolean logic circuits, associative memory, image processors, and combinatorial optimizers. In this paper, we discuss the basic philosophy behind adopting this architecture for nanoelectronic circuits and report on our experimental progress towards synthesizing this system.

An Algorithm Applicable To Clearing Combinatorial Exchanges, Marius Silaghi

Electrical Engineering and Computer Science Faculty Publications

It is important to approach negotiations in a way that ensures privacy. So far, research has focused on securely solving restricted classes of negotiation techniques, mainly the (M+1)-st-price auctions. Here we show how these results can be adapted to more general problems. This paper extends our previous results on how distributed finite discrete problems can be solved securely. Such problems can model larger classes of negotiation problems, .e.g. Combinatorial Exchanges [Sil02]. In Finite Discrete Maximization, each tuple in the problem space is associated with an integer value in a predefined interval and we search for a maximizing input. Values from …

Performance Analysis Of A Maximum-Likelihood Speckle Motion Estimator, Donald D. Duncan, Sean J. Kirkpatrick

Electrical and Computer Engineering Faculty Publications and Presentations

Presented herein is a performance analysis of a maximum likelihood estimator for calculating small speckle motions. Such estimators are important in a variety of speckle techniques used in non-destructive evaluation. The analysis characterizes the performance (bias and RMS deviation) of the estimator as a function of the signal-to-noise ratio. This SNR parameter is a convenient surrogate for decorrelation of sequential speckle patterns such as are seen in biological tissues. Although the particular estimator is predicated on speckle motions that are a small fraction of a pixel, accurate performance is demonstrated for instantaneous motions of up to ±0.8 pixel/record. Beyond this …

Network Traffic Anomaly Detection Based On Packet Bytes, Philip K. Chan, Matthew V. Mahoney

Electrical Engineering and Computer Science Faculty Publications

Hostile network traffic is often "different" from benign traffic in ways that can be distinguished without knowing the nature of the attack. We describe a two-stage anomaly detection system for identifying suspicious traffic. First, we filter traffic to pass only the packets of most interest, e.g., the first few packets of incoming server requests. Second, we model the most common protocols (IP, TCP, telnet, FTP, SMTP, HTTP) at the packet byte level to flag events (byte values) that have not been observed for a long time. This simple system detects 132 of 185 attacks in the 1999 DARPA IDS evaluation …

Shared-Data Or Message Passing Computing Models – A Human Factor In Technical Choices, Angela Sodan, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

No abstract provided.

On The Use Of Singular Perturbations To Neglect The Dynamic Saliency Of Synchronous Machines, Steven D. Pekarek, Michael T. Lemanski, Eric A. Walters

Electrical and Computer Engineering Faculty Research & Creative Works

A common approximation used in the analysis of power systems is the neglect of the dynamic saliency in synchronous machines. In this paper, it is shown that eliminating the error associated with neglecting dynamic saliency can be accomplished with the addition of a singular perturbation(s) into the machine model. By considering the elimination of error in such a way, singular-perturbation-based model-order-reduction techniques are used to derive detailed- and reduced-order models of synchronous machines where dynamic saliency is eliminated with zero error and no added numerical cost.

Comparison Of Open- And Closed-Loop Process Identification Techniques In The Time-Domain, Tony Kealy, Aidan O'Dwyer

Conference papers

Abstract: This paper describes seven methods to identify a mathematical model for a real process with a time delay. The process is the Process Trainer, PT326 from Feedback Instruments Limited. Six of the methods use the step response data and one of the methods uses the impulse response data for identification.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Ii Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch. A nonuniform surface etch will leave some unclean areas with contaminants and micron size particles. These significantly affect mutipacting. Further, a nonuniform etch will leave areas with damaged grain structure, which is not good for superconducting properties. Typically, the depth of chemical …

Automatic Target Recognition Classification System Evaluation Methodology, Christopher Brian Bassham

Theses and Dissertations

This dissertation research makes contributions towards the evaluation of developing Automatic Target Recognition (ATR) technologies through the application of decision analysis (DA) techniques. ATR technology development decisions should rely not only on the measures of performance (MOPs) associated with a given ATR classification system (CS), but also on the expected measures of effectiveness (MOEs). The purpose of this research is to improve the decision-makers in the ATR Technology development. A decision analysis framework that allows decision-makers in the ATR community to synthesize the performance measures, costs, and characteristics of each ATR system with the preferences and values of both the …

A New Approach To Robot’S Imitation Of Behaviors By Decomposition Of Multiple-Valued Relations, Uland Wong, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

Relation decomposition has been used for FPGA mapping, layout optimization, and data mining. Decision trees are very popular in data mining and robotics. We present relation decomposition as a new general-purpose machine learning method which generalizes the methods of inducing decision trees, decision diagrams and other structures. Relation decomposition can be used in robotics also in place of classical learning methods such as Reinforcement Learning or Artificial Neural Networks. This paper presents an approach to imitation learning based on decomposition. A Head/Hand robot learns simple behaviors using features extracted from computer vision, speech recognition and sensors.

On The Area Of Hypercube Layouts, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

This paper precisely analyzes the wire density and required area in standard styles for the hypercube. It shows that the most natural, regular layout of a hypercube of N^2 nodes in the plane, in a NxN grid arrangement, uses floor(2N/3)+1 horizontal wiring tracks for each row of nodes. (In the process, we see that the number of tracks per row can be reduced by 1 with a less regular design, as can also be seen from an independent argument of Bezrukov et al.) This paper also gives a simple formula for the wire density at any cut position and a …

Four-Terminal Quantum Resistor Network For Electron-Wave Computing, Diwakar Ramamurthy, Cheng-Hsiao Wu

Electrical and Computer Engineering Faculty Research & Creative Works

Interconnected ultrathin conducting wires or, equivalently, interconnected quasi-one-dimensional electron waveguides, which form a quantum resistor network, are presented here in four-terminal configurations. The transmission behaviors through such four-terminal networks are evaluated and classified. In addition, we show that such networks can be used as the basic building blocks for a possible massive wave computing machine in the future. In a network, each interconnection, a node point, is an elastic scatterer that routes the electron wave. Routing and rerouting of electron waves in a network is described in the framework of quantum transport from Landauer-Buttiker theory in the presence of multiple …

Automated Synthesis Of Generalized Reversible Cascades Using Genetic Algorithms, Martin Lukac, Mikhail Pivtoraiko, Alan Mishchenko, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

We propose an automated synthesis of Reversible logic (RL) circuits using Darwinian and Lamarckian Genetic Algorithms (GA). Our designs are in a form of cascades of generalized gates which generalize factorized Exclusive-Or-Sum-of-Products (ESOP) circuits. GA can be used to explore the problem space of combinational functions and here it is used to evolve reversible logic circuits. We emphasize the role of problem encoding - a well-designed encoding leads to improved results. Our method with well-encoded circuits is compared to standard method on classical benchmarks in GA, and shows good results for synthesis of both random functions and benchmark functions with …

Evolving Quantum Circuits And An Fpga-Based Quantum Computing Emulator, Goran Negovetic, Marek Perkowski, Martin Lukac, Andrzej Buller

Electrical and Computer Engineering Faculty Publications and Presentations

The goal of the PQLG group is to develop complete methodologies, software tools and circuits for quantum logic. Our interests are mainly in logic synthesis for quantum circuits and quantum system design [10]. Emulation of quantum circuits using standard reconfigurable FPGA technology and FPGA-based Evolvable Quantum Hardware, proposed here, are research areas not yet dealt with by other research groups. A parallel software simulator was presented in [13].

Logic Synthesis For Regular Layout Using Satisfiability, Marek Perkowski, Alan Mishchenko

Electrical and Computer Engineering Faculty Publications and Presentations

In this paper, we propose a regular layout geometry called 3×3 lattice. The main difference of this geometry compared to the known 2×2 regular layout geometry is that it allows the cofactors on a level to propagate to three rather than two nodes on the lower level. This gives additional freedom to synthesize compact functional representations. We propose a SAT-based algorithm, which exploits this freedom to synthesize 3×3 lattice representations of completely specified Boolean functions. The experimental results show that the algorithm generates compact layouts in reasonable time.

Adaptive Ds-Cdma Multiuser Detection For Time Variant Frequency Selective Rayleigh Fading Channel, Xin Tang

Dissertations

The current digital wireless mobile system such as IS-95, which is based on direct sequence Code Division Multiple Access (DS-CDMA) technology, will not be able to meet the growing demands for multimedia service due to low information exchanging rate. Its capacity is also limited by multiple accessed interference (MAI) signals.

This work focuses on the development of adaptive algorithms for multiuser detection (MUD) and interference suppression for wideband direct sequence code division multiple access (DS-CDMA) systems over time-variant frequency selective fading channels. In addition, channel acquisition and delay estimation techniques are developed to combat the uncertainty introduced by the wireless …

Multicast Outing Protocols And Architectures In Mobile Ad-Hoc Wireless Networks, Beongku An

Dissertations

The basic philosophy of personal communication services is to provide user-to-user, location independent communication services. The emerging group communication wireless applications, such as multipoint data dissemination and multiparty conferencing tools have made the design and development of efficient multicast techniques in mobile ad-hoc networking environments a necessity and not just a desire. Multicast protocols in mobile adhoc networks have been an area of active research for the past few years.

In this dissertation, protocols and architectures for supporting multicast services are proposed, analyzed and evaluated in mobile ad-hoc wireless networks. In the first chapter, the activities and recent advances are …

Em-Based Iterative Channel Estimation And Sequence Detection For Space-Time Coded Modulation, Zbigniew Baranski

Dissertations

Reliable detection of signals transmitted over a wireless communication channel requires knowledge of the channel estimate. In this work, the application of expectationmaximization (EM) algorithm to estimation of unknown channel and detection of space-time coded modulation (STCM) signals is investigated. An STCM communication system is presented which includes symbol interleaving at the transmitter and iterative EM-based soft-output decoding at the receiver. The channel and signal model are introduced with a quasi-static and time-varying Rayleigh fading channels considered to evaluate the performance of the communication system. Performance of the system employing Kalman filter with per-survivor processing to do the channel estimation …

On Chip Implement Of Deadlock Avoidance In Wormhole Networks, Kiran K. Gururaj

Theses

This thesis gives a detailed description of the Application Specific Integrated Circuit (ASIC) design to avoid deadlocks in Wormhole Networks. Deadlock avoidance is the most critical issue while considering wormhole networks and should be avoided by any routing protocol and algorithm. A novel architecture for the Turn Prohibition Based Routing (TPBR) protocol has been proved to be efficient and was developed as a part of this work. This architecture for implementing the algorithm is divided into three parts. The first part determines the order of selccuon of the nodes, in the network to run the algorithm. The second part deals …

Optimum Of Catalyst Layers For Direct Methanol Fuel Cells, Jun Zhang, Lei Li, Li Xu, Yu-Xin Wang

Journal of Electrochemistry

The performances of membrane electrode assemblies (MEAs)with various Pt loading were compared. The amount of Nafion in a catalytic layer was optimized, and the effect of Nafion loading on the resistance of MEAs was investigated with ac impedance spectroscopy. For a MEA with both Pt 4 mg/cm² in the anode and the cathode, suitable Nafion loading was 21.4 wt% in the anode. With 21.4 wt% Nafion loading in the cathode, the Direct Methanol Fuel Cells(DMFC) showed the highest performance at high current density. While, the DMFC performances came down, as Nafion loading increasing,for ohm and concentration polarization.

Study On Modification Of Spinel Limn2O4 By Overcoating, Ren-Gang Zhang, Shi-Xi Zhao, Jung-Lei Xia, Han-Xing Liu

Journal of Electrochemistry

The surface of spinel LiMn₂O₄ was modified by the sol-gel process with LiCoO₂-coated LiMn₂O₄ and studied by XRD, SEM and EPMA. The results have shown that the surface of the coated grains heated at 700 ℃ for 10h, which is cubic spinel, were Co-rich. The amount of Co³⁺ in the grains changed owing to different place of the grain and decreased from surface to inner parts. Using the coated as the cathode of Li-ion cells, the initial capacity deceased slightly, but the amount of Mn²⁺ solving in electrolyte decreased, Jahn-Teller …

Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong

Journal of Electrochemistry

Single-phase solid solution of LiNi_0.8-xAl_xCo_0.2O₂ (0≤ x <0.1)had been synthesized and characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). Their electrochemical performance was examined by charge-discharge cycling. The LiNi_0.71Al_0.09Co_0.2O₂ compound showed a discharge capacity of 152 mAh/g after 20 cycles that corresponds to 97.4% capacity retention. The beneficial effect of co-doping with Al and Co elements was corro-borated by slow scanning cyclic voltammograms(SSCV), electrochemical impedance spectrum (EIS) and differential scanning calorimetry (DSC) data on charged cathodes. These results show that the 2D-character of the crystal lattice was stabilized by co-doping with Al and Co, the phase transitions that occur during deintercalation or intercalation of Li-ions were significantly suppressed, …

Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan

Journal of Electrochemistry

An all-vanadium redox flow storage battery possesses many advantages over conventional storage batteries.The development statue of two types electrode materials (metal and compound type) is introduced in this article.

Initial Stages Of Copper Electrodeposition On Glassy Carbon Electrode, Ling Huang, Rui Zhang, Min Gu, Fang-Zu Yang, Shu-Kai Xu, Shao-Min Zhou

Journal of Electrochemistry

Initial stages of copper electrodeposition on glassy carbon electrode from acid sulphate solutions were studied using cyclic voltammetry and chronoamperometry. The electrolyte solution was a 0.05 mol.L^-1 copper sulphate, 1.4～1.8 mol⋅L^-1 sulphuric acid containing 1 mg·L^-1 2-mercaptobenzoimidazole, Results show that 2-mercaptobenzoimidazole produced an inhibition of the copper deposition, probably related to the adsorption,sulphuric acid promote copper electrodeposition. The initial deposition kinetics corresponded to a model including instantaneous nucleation and diffusion controlled growth.Addition of 2-mercaptobenzoimidazole and sulphuric acid did not change the initial nucleation of copper electrocrystallization, it increased the nucleation rate and the number density of nuclei …

Ionic Conduction In Ba0.95Ce0.9Y0.1O3 - Α Solid Oxide And Its Performance In Fuel Cell, Gui-Lin Ma, Ding-Xian Jia, Li-Gan Qiu, Hui Shi, Rong Chen

Journal of Electrochemistry

Using Ba_0.95Ce_0.9Y_0.1O_3-α as a solid electrolyte and porous platinum as electrodes,hydrogen and oxygen concentration cells and hydrogen-air fuel cell were constructed, respectively. Electromotive forces (MEFs) of the gas concentration cells and I-V characteristics of the fuel cell were detdrmined in the temperature range of 600～1 000 ℃. The Ba_0.95Ce_0.9Y_0.1O_3-α exhibited almost the pure protonic conduction under hydrogen gas,and a mixed conduction of oxide-ion and electron hole with oxide-ion transport number of 0.3～0.5 under oxygen gas. It exhibited a mixed conduction of proton and oxide-ion with the …

Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu

Journal of Electrochemistry

The effect of vanadium on the properties of the electrode of molybdenum nitride has been studied by using XRD, SEM and cyclic voltammetry. Modified molybdenum nitride was made as follow: films were coated by dipping titanium sheet in the solution containing different composition of molybdenum oxide, ammonium vanadate, ammonia, glycol and oxalic acid, and coated films are reacted with free ammonia. The results show that the specific capacitance of modified electrode was considerably increased and the operation voltage was broadened with the addition of ammonium vanadate in the dipping solution. The mechanism of these effects generated is the formation of …

Some Consideration For Lithium-Ion Cells' Safety, Guang-Xia Hu, Jing-Ying Xie

Journal of Electrochemistry

The safety is the most important problem for lithium ion cells, especially for large lithium ion cells. In this paper, some information about lithium ion cells' safety can be learned by discussing several aspects of lithium ion cells, such as, materials of lithium ion cell, manufacturing processes, using conditions and so on.

Linear Feature Detection Using Multiresolution Wavelet Filters, Samuel Peter Kozaitis, Somkait Udomhunsakul, Rufus H. Cofer, A. Agarawal, Shuwu Song

Electrical Engineering and Computer Science Faculty Publications

We detected roads in aerial imagery based on multiresolution linear feature detection. Our method used the products of wavelet coefficients at several scales to identify and locate linear features. After detecting possible road pixels, we used a shortest-path algorithm to identify roads. The multiresolution approach effectively increased the size of the region we examined when looking for possible road pixels and reduced the effect of noise. We found that our approach leads to an effective method for detecting roads in aerial imagery.

New Plane Wave Representation Of Point Sources, L. (Lijun) J. Jiang, W. C. Chew

Electrical and Computer Engineering Faculty Research & Creative Works

A new method to decompose the spherical wave of a 3D point source into plane waves is discussed. Using Cauchy's theorem, it represents spherical waves as the summation of surface-direction-wave integrals. Results show that only 6 directions waves needed storage. Thus, the method provides a good cost reduction for plane-wave related algorithms.