Engineering Commons^™

Noncontact Scanning Impedance Imaging In An Aqueous Solution, Aaron R. Hawkins, Hongze Liu, Travis E. Oliphant, Stephen M. Schultz

Faculty Publications

We present a method for imaging based on noncontact electrical impedance measurements and mechanical scanning. Measurement results are shown for an initial system based on this concept. An impedance probe design is presented, applicable to the test system. Line-scan data plots of high impedance contrast structures show a good fit to a theoretical physical model. Image resolutions on the order of 100 m are indicated for the initial system. Two-dimensional impedance images of biological tissue generated by this technique are shown.

Laser-Assisted Nanoscale Deposition Of Diamond-Like Carbon Films On Tungsten Tips, J. Shi, Yongfeng Lu, R. S. Cherukuri, K. K. Mendu, D. W. Doerr, Dennis R. Alexander, L. P. Li, X. Y. Chen

Department of Electrical and Computer Engineering: Faculty Publications

Diamond-like carbon (DLC) films were deposited on tungsten tips under KrF excimer laser irradiation in benzene solution. The deposition process was found to be highly dependent on tip sharpness. Tips with larger curvature radii and smaller aspect ratios could not be coated with DLC films under the same condition as that for sharp tips. Raman spectra showed that more sp³ tetrahedral structures were present in the DLC films on a tip with a smaller curvature radius. Simulation results showed that the tip sharpness dependent local optical enhancement played an important role in the DLC deposition process. An optical field …

Day 3: Friday, August 6, 2004: Cbm And Unconventional Gas Development, Gary Bryner, Ken Wonstolen

Energy Field Tour 2004 (August 4-6)

19 pages (includes illustrations and maps).

Day 2: Thursday, August 5, 2004: Valmont Power Plant, Valmont Power Plant

Energy Field Tour 2004 (August 4-6)

5 pages (includes illustrations).

Day 2: Thursday, August 5, 2004: Xcel Energy Lookout Dispatch Center, Doug Larson, United States. Department Of Energy

Energy Field Tour 2004 (August 4-6)

7 pages (includes illustrations and maps).

Agenda: Energy Field Tour 2004, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2004 (August 4-6)

Tour (day trips along the Front Range, originating in Boulder) held August 4-6, 2004.

Summary: Assorted articles, maps, brochures, and other materials prepared for participants of the tour

Contents:

2004 energy field tour agenda -- Mission and vision of the Natural Resources Law Center -- Natural Resources Law Center, University of Colorado School of Law : a brief introduction -- Boulder area street map 4 -- Chatauqua area map -- [Bus] Route 203/225 : Boulder/Lafayette/Baseline -- Boulder-Lafayette via Baseline [bus schedules]

WEDNESDAY, AUGUST 4, 2004: OIL & GAS PRODUCTION FACILITIES AND PLATTEVILLE GAS PROCESSING FACILITY: 'Our next shortage', The Washington …

Day 1: Wednesday, August 4, 2004: Ponnequin Wind Farm, Western Resource Advocates

Energy Field Tour 2004 (August 4-6)

2 pages (includes illustration).

Day 1: Wednesday, August 4, 2004: Oil & Gas Production Facilities And Platteville Gas Processing Facility, Bruce Thompson

Energy Field Tour 2004 (August 4-6)

12 pages (includes illustrations and map).

Day 1: Wednesday, August 4, 2004: Calpine Rocky Mountain Energy Center, Calpine Rocky Mountain Energy Center

Energy Field Tour 2004 (August 4-6)

5 pages (includes illustrations).

Effect Of Photoperiodicity On Co2 Fixation By Chlorella Vulgaris Buitenzorg In Bubble Column Photobioreactor For Food Supplement Production, Anondho Wijanarko, Dianursanti Dianursanti, Arief Budi Witarto, Roekmijati Widaningroem Soemantojo

Makara Journal of Technology

To reduce the level of CO2 content in air, effort on converting CO2 to useful products is required. One of the alternatives includes CO2 fixation to produce biomass using Chlorella vulgaris Buitenzorg. Chlorella vulgaris Buitenzorg is applied for production of food supplement. Chlorella vulgaris Buitenzorg is also easy to handle due to its superior adaptation. Currently, Chlorella vulgaris Buitenzorg has been analyzed by some experts for its cellular composition, its ability to produce high quality biomass and the content of essential nutrition. A series of experiments was conducted by culturing Chlorella vulgaris Buitenzorg using Beneck medium in bubbling column photobioreactor. …

Secondary Flow Experimental Study For Axial Compressor Cascade Strong Stagger With And Without Tip- Clearance: Static Pressure Distribution On Blade Surface, Syamsuri Syamsuri

Makara Journal of Technology

Secondary Flow Experimental Study for Axial Compressor Cascade Strong Stagger With and Without Tip- Clearance: Static Pressure Distribution on Blade Surface. The performance of blade cascade is influenced by the growth and boundary layer’s separation along blade surface and endwall (casing and hub). The secondary flow which happens near hub and casing compressors is three dimentional flow separation phenomenon comes from interaction blade boundary layer with casing and hub boundary layers in the compressor. The secondary flow causes secondary losses, blockage effect, and turning angle (deflection) distribution along blade span. The result of the research shows that the increase of …

Synthesize Of Emulsion Polymer Latex For Sub-Grade Cbr Improvement In The Road Construction, Keba Moto, V. Julian, Syamsudin Syamsudin, T. A. Wiradi, S. R. Wijaya

Makara Journal of Technology

Synthesize of emulsion polymer latex for sub-grade CBR improvement in the road construction. Latex polymer for California Bearing Ratio (CBR) enhancement in sub-grade soil of road building has been prepared by emulsion polymerizations technique. The prepared polymer then characterize by Fourier Transform Infrared (FTIR). For application purpose, CBR test was done to the compacted polymer added-soil. The CBR test is done also for both soaked and unsoaked samples. It is found that our latex polymer is better then other imported latex polymer. For the latex polymer, which is design to have Temperatur glass (Tg) around 9.8-19.6o, indicating the formation of …

Wavelenght-Dispersive X-Ray Flourescence Accuration, H. Widyatmoko

Makara Journal of Technology

Wavelenght–Dispersive X-Ray Flourescence Accuration. X-Fuorescence spectrometry is a method, which is increasingly applied in the geochemical analysis. X-Fuorescence spectrometry is classified under two categories – WDXRF (wavelenght – dispersive X-ray fluorescence spectrometer) and EDXRF (energy-dispersive X – ray fluorescence spectrometer). WDXRF can be configured as a sequential spectrometer , a simultaneous spectrometer or a hibrid instrument, which combines the advantages of the simultaneous and sequential spectrometers into one instrument. Each instrument is different in some characteristics, and each has applications for which it is specifically suited. In this investigation sequential spectrometer PW 1450 was used to analyze the major, minor …

High Efficiency 90 Degree Silica Waveguide Bend Using An Air Hole Photonic Crystal Region, J. Cai, S. Kim, Gregory P. Nordin, J. Jiang

Faculty Publications

We propose the hybrid integration of an air hole photonic crystal (PhC) structure with a high (0.75%) single-mode silica waveguide to achieve an ultracompact high efficiency 90 bend for transverse-magnetic polarized light. Diffraction from the periodic boundary between the PhC and silica waveguide regions is shown to seriously degrade the optical efficiency of the bend. A microgenetic algorithm ( GA) combined with a two-dimensional finite-difference time-domain method is used to modify the PhC and its boundary layer to suppress this diffraction which in turn maximizes bend efficiency. The final optimized structure has a 99.4% bend efficiency at a wavelength of …

A New Calibration Method For Current Probes, Ramachandran Chundru, David Pommerenke, Sunitha Chandra

Electrical and Computer Engineering Faculty Research & Creative Works

EMC engineers often use current probes to detect common mode currents. It is necessary to characterize the probes up to Giga Hertz frequencies. Existing calibration methods for current clamps suffer from the problem of not directly measuring the current within the current clamp. Instead they either reconstruct the current from measurements at other locations or they use assumptions regarding the geometry which allows them to use a current that is measured at a different location without applying a mathematical correction. The proposed method overcomes these disadvantages by directly measuring the current at the center of the current clamp. This paper …

The Design Of A Lumped Element Impedance-Matching Network With Reduced Parasitic Effects Obtained From Numerical Modeling, Shaofeng Luan, Jun Fan, James L. Knighten, Norman W. Smith

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents an impedance-matching network design with numerical modeling of the parasitic effects. A modeling tool CEMPIE (a Circuit Extraction approach based on a Mixed Potential Integral Equation formulation) is used to model the hoard-level parasitics of surface mount technology (SMT) resistors for impedance-matching networks. A 3-layer design of impedance-matching network with 0402 SMT resistors is implemented according to the modeling results. And its performance is demonstrated.

Comparison Of Via Equivalent Circuit Model Accuracy Using Quasi-Static And Full-Wave Approaches, Bruce Archambeault, Samuel R. Connor, Jianmin Zhang, James L. Drewniak, Mauro Lai, Antonio Orlandi, Giulio Antonini, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

The EMC and signal integrity impact of printed circuit board (PCB) trace discontinuities, such as vias, where the signal is transitioned from one layer to another in the PCB stackup, have become significant recently with the use of very high speed signals in today''s systems. If these discontinuities are ignored, significant distortion of the high speed signal can occur, and in many cases, cause data errors. A fast and accurate technique to include the effect of via discontinuities in the typical design process is needed to ensure this distortion is considered if significant. Therefore, a simple equivalent circuit for the …

Comparison Of Water And Saltwater Movement In Mortar Based On A Semiempirical Electromagnetic Model, Shanup Peer, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The presence of chloride ions in steel-reinforced structures leads to the corrosion of the reinforcement thus compromising the integrity and strength of the structure. Thus, it is of great interest to nondestructively detect and evaluate free chloride content in concrete. To this end, an investigation was initiated where two mortar cubes were soaked in distilled water and saltwater solutions, respectively. Their temporal microwave reflection properties were measured using open-ended rectangular waveguides on a daily basis for three cycles, each lasting 35 days. Subsequently, a semiempirical electromagnetic model was developed to simulate the reflection properties of the cubes. The outcome of …

Digital Scr Control Box For Educational Laboratory, Zakdy Sorchini, Jonathan W. Kimball, Philip T. Krein

Electrical and Computer Engineering Faculty Research & Creative Works

A "blue box" has been designed to introduce the silicone controlled rectifier (SCR) to power electronics students. SCRs are useful in many real-world applications, and are conceptually important in a student's understanding of power converters. The box is highly flexible in application, and its internal design is simple enough to explain to students. Experiments are shown, both of the type commonly used in the laboratory and of the type used for demonstrations. The box has also been designed to be suitable for research purposes and line voltage applications.

Expert System Algorithms For Identifying Radiated Emission Problems In Printed Circuit Boards, Hwan-Woo Shim, Todd H. Hubing, Thomas Van Doren, Richard E. Dubroff, James L. Drewniak, David Pommerenke, R. Kaires

Electrical and Computer Engineering Faculty Research & Creative Works

Radiated emission algorithms for a printed circuit board EMC expert system are described. The expert system mimics the thinking processes that human EMC engineers would use to analyze circuit boards and make design recommendations. Working with limited information about the enclosure, cables or the exact nature of the signals, the expert system evaluates different structures on the printed circuit board looking for potentially strong radiated emission sources. Results obtained from the analysis of a sample printed circuit board are provided to demonstrate how the expert system quickly identifies problems that would otherwise be difficult to locate.

Extraction Of A Spice Via Model From Full-Wave Modeling For Differential Signaling, Shaofeng Luan, Giuseppe Selli, James L. Drewniak, Andrea De Luca, Giulio Antonini, Antonio Orlandi, Antonio Ciccomancini Scogna, Jun Fan, James L. Knighten, Norman W. Smith, Ray Alexander

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a procedure for building SPICE models for via transitions in differential signaling. The method of extracting parameters of SPICE models from a full-wave simulation tool is demonstrated. Then the validity of the SPICE models is studied by comparing the solution from the SPICE models with that from the full-wave simulation.

Feedback Linearization Based Power System Stabilizer Design With Control Limits, Wenxin Liu, Ganesh K. Venayagamoorthy, Donald C. Wunsch, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

In power system controls, simplified analytical models are used to represent the dynamics of power system and controller designs are not rigorous with no stability analysis. One reason is because the power systems are complex nonlinear systems which pose difficulty for analysis. This paper presents a feedback linearization based power system stabilizer design for a single machine infinite bus power system. Since practical operating conditions require the magnitude of control signal to be within certain limits, the stability of the control system under control limits is also analyzed. Simulation results under different kinds of operating conditions show that the controller …

Static And Quasi-Dynamic Load Balancing In Parallel Fdtd Codes For Signal Integrity, Power Integrity, And Packaging Applications, Sarah A. Seguin, Michael A. Cracraft, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

The Finite-Difference Time-Domain (FDTD) method is a robust technique for calculating electromagnetic fields, but practical problems, involving complex or large geometries, can require a long time to calculate on any one single-processor computer. One computer with many processors or many single-processor computers can reduce the computation time. However, some FDTD cell types, e.g., PML cells, require more computation time than others. Thus, the size and shape of the individual process allocations can significantly influence the computation time. This paper addresses these load balancing issues with static and quasi-dynamic approaches. The Message-Passing Interface (MPI) library is applied to a three-dimensional (3D) …

An Extrapolation Procedure To Shorten Time Domain Simulations, Giuseppe Selli, James L. Drewniak, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Time-domain simulation algorithms are widely used in the anaylsis and design of electromagnetic systems. Many of them are characterized by high Q's. Thus, the simulations have to employ many time steps in order to achieve a complete characterization of these systems. This time-consuming computational effort can be avoided if the late instants of time are extrapolated by applying a parametric estimation algorithm. An optimized implementation of a time-domain extrapolation method and a stop criterion are discussed in this paper. The latter criterion is based upon a normalized squared difference between the waveforms extrapolated from two different sets of initial data …

Defect Characterization And Yield Analysis Of Array-Based Nanoarchitecture, Shanrui Zhang, Minsu Choi, Nohpill Park

Electrical and Computer Engineering Faculty Research & Creative Works

With molecular-scale materials and fabrication techniques recently developed, high-density computing systems in nanometer domain emerge. An array-based nanoarchitecture has been recently proposed based on nanowires such as carbon nanotubes (CNTs), silicon nanowires (SiNWs). High-density nanoarray-based systems consisting of nanometer-scale elements are likely to have many imperfections; thus, defect-tolerance is considered as one of the most significant challenges. In this paper, we propose a probabilistic yield model for the array-based nanoarchitecture. The proposed yield model can be used 1) to accurately estimate the raw and net array densities, and 2) to design and optimize more defect and fault-tolerant systems based on …

Phase Shifts That Accompany Total Internal Reflection At A Dielectric–Dielectric Interface, R. M.A. Azzam

Electrical Engineering Faculty Publications

The absolute, average, and differential phase shifts that p- and s-polarized light experience in total internal reflection (TIR) at the planar interface between two transparent media are considered as functions of the angle of incidence φ. Special angles at which quarter-wave phase shifts are achieved are determined as functions of the relative refractive index N. When the average phase shift equals π/2, the differential reflection phase shift Δ is maximum, and the reflection Jones matrix assumes a simple form. For N>√3, the average and differential phase shifts are equal (hence δ_p=3δ_s) at …

Kalman Filtering With Uncertain Noise Covariances, Srikiran Kosanam, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

In this paper the robustness of Kalman filtering against uncertainties in process and measurement noise covariances is discussed. It is shown that a standard Kalman filter may not be robust enough if the process and measurement noise covariances are changed. A new filter is proposed which addresses the uncertainties in process and measurement noise covariances and gives better results than the standard Kalman filter. This new filter is used in simulation to estimate the health parameters of an aircraft gas turbine engine.

A Method Of Including Switching Loss In Electro-Thermal Simulations, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

Often, power electronics systems are simulated with ideal switching elements, perhaps augmented with conduction loss models. A behavioral model is proposed that also includes switching loss and is independent of switching frequency. Therefore, it is suitable for variable frequency control methods, including hysteresis, delta modulation, and random PWM. Models have been realized in Dymola using voltage-controlled voltage sources, current sources, logic, and additional ideal switches. Thermal ports are included to facilitate electro-thermal simulation. A method for parameter extraction is demonstrated using experimental data from standard PWM.

Anticipating Emi And On-Board Interference In Automotive Platforms, Shishuang Sun, Geping Liu, David Pommerenke, James L. Drewniak, Richard W. Kautz, Chingchi Chen

Electrical and Computer Engineering Faculty Research & Creative Works

A dual-step MTL / FDTD strategy is proposed for anticipating full-vehicle level EMI. In the first step, the current distribution along a cable bundle connecting to electronic modules an an automotive platform is calculated using multi-conductor transmission-line (MTL) models. In order to account for common-mode discontinuities on the vehicle chassis, e.g., slots, 3D full-wave modeling (FDTD) is used to determine radiation impedances, which are thereafter incorporated in the MTL models for compensating the radiation power loss. In the second step, the obtained currents are implemented as impressed current sources in full-vehicle full-wave modeling using an FDTD multi-wire subcelluar algorithm. Thus, …

A Circuit Approach To Model Narrow Slot Structures In A Power Bus, Lin Zhang, Ray Alexander, Richard E. Dubroff, James L. Drewniak, James L. Knighten, Norman W. Smith, Bruce Archambeault, Samuel R. Connor, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

A coupled transmission line model for narrow slot structures in DC power planes is proposed. This approach, combined with SPICE-based cavity models and a segmentation method, provides an easy and fast way to model relatively complex structures of power planes with narrow slots often used for isolation purposes. This approach is used to achieve isolation using gapping. The cavity model formulations for rectangular and isosceles right triangular segments are reviewed. The rationale of modeling the narrow slot as a three-conductor transmission line is described. The modeling results are shown and compared with the output of a full wave simulation tool, …