Architecture Commons^™

Tefft Street Corridor Redesign, Andres M. Figueroa

City and Regional Planning

The Tefft Street Corridor Redesign is a proposal for a buffered shared use path along the most significant 1.75 mile portion of Tefft Street located in Nipomo, California. The proposal includes an introduction, background information, existing conditions analysis, regulatory standards analysis, community engagement, conceptual designs, and implementation framework.

A Novel And Enhanced Calibration Of The Tilting Weir As A Flow Measurement Structure, Joseph E. Pugh, S. Karan Venayagamoorthy, Timothy K. Gates, Céline Berni, Marie Rastello

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A large collection of laboratory measurements of piezometric head (h) and discharge (Q) were made over hydraulic models of a tilting weir at nine different angles, ranging from 25.7° to 90° within a 0.3-m-wide flume. These measurements were corroborated with additional laboratory data taken within a 1-m-wide flume across four inclination angles. The range of both inclination angle (θ) and flow scale examined in this study elucidate the nature of the head-discharge rating equation beyond previous work. Results show that as θ decreases under a constant Q, the h over the weir decreases in a monotonic fashion due to the …

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Sustainability Of Apparel Exporting Industry Facilities In South Asia, Sree L. Anilkuma, George H. Berghorn, M.G. Matt Syal

The Professional Constructor

The apparel industry’s contribution to the gross domestic product in South Asian countries is significant and provides livelihoods for millions of people in this region. Although this industry’s contribution towards the economy is substantial, its negative impact on the environment and the working conditions have always been critical issues of concern. The two countries of emphasis in this research, Bangladesh, and India, have experienced numerous garment factory accidents in the form of building collapses, factory fires, and boiler explosions, which have killed and injured thousands of workers. These incidents have brought attention on the need to improve poor facilities and …

Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke

The Professional Constructor

Trust is vital in every facet of life, enabling collaborative efforts and valuing contributions from various individuals. This is particularly true in the construction industry, where teamwork is essential for success. Prior research has consistently demonstrated that heightened trust levels significantly contribute to better project outcomes and increased client satisfaction. Despite its critical role, the construction industry has yet to adopt a structured hierarchical perspective of trust that aligns with its unique demands. This study aims to fill this gap by validating a comprehensive taxonomy of trust specifically designed for the construction sector. Through literature review, this study identifies key …

Building Services Engineering March/April 2024

Building Services Engineering

No abstract provided.

A Framework For Eradicating Women Discrimination In Architectural Design Firms In Egypt And Gcc Countries, Ayman Ahmed Ezzat Othman, Rodayna Ehab Hegazy

Architectural Engineering

Purpose – This research aims to develop and validate a framework for eradicating women’s discrimination in architectural design firms (ADFs) in Egypt and propose strategies for prospective adoption in the Gulf Cooperation Council (GCC) countries to increase the transformational impact of women on the architectural and urban developments of the Gulf region.

Design/methodology/approach – Acombined qualitative and quantitative research approach was designed to accomplish four objectives. Firstly, to investigate the nature of business in ADFs, women’s discrimination and policies for gender equity (PGE) in architecture. Secondly, to analyse three case studies to validate the identified causes and impacts of women’s …

The Contribution Of Smart Parks To Achieving The Resilience Of Cities, Mohamed E. Elattar

Architectural Engineering

No abstract provided.

Root And Causes Of Skilled Labor Shortage In Construction Industry: Comprehensive Literature Review, Nicholas Hardy, Carolina Barbosa-Resende, James Kereri, Arash Taghinezhad

The Professional Constructor

The skilled labor shortage is well documented from a historical perspective via studies focusing various construction trades such as carpentry, mechanical, electric and plumbing, and tile setters. Causes of such shortages such as industry image, college as a preferred choice after high school, and construction being a last resort have been investigated extensively. Consequently, possible solutions ranging from amplifying shop classes in high school to intensifying recruiting efforts for union training programs have all been addressed throughout the last 40 years. However, recent studies have focused on identifying the magnitude and reach of the skilled labor gap while limited attention …

The Professional Constructor, Full Issue, Volume 49, Number 01

The Professional Constructor

No abstract provided.

Mixed Reality For In-Field Construction Activities: A Systematic Literature Review To Identify Challenges And Solutions, Sumanth Sai. P., Jason Lucas

The Professional Constructor

With the new industrial revolution, “Industry 4.0,” it is important to understand and incorporate the new standards and technologies evolving in the market. Industry 4.0 relies on the integrated use of big data and analytics coupled with various technologies to help make decisions and manage projects. This revolution has brought Mixed Reality (MR) into the construction field. Mixed reality (MR) offers significant benefits for smart industries, such as enhancing productivity, training, manufacturing, error correction, assembly, and packaging processes. But how feasible are Mixed Reality Technologies (MRTs) considering the high initial investment required for acquiring devices, subscribing to services, planning and …

Computer-Integrated Construction Management With Procore, Vedanth Ashoka, M.G. Matt Syal

The Professional Constructor

The construction industry faces difficulties in managing the enormous amounts of data generated at each stage of a project, impacting project coordination and decision-making. Currently the industry is facing the issue of a lack of interoperability among the multiple software programs being used for different functions. To address this lack of interoperability, there is a need for an integrated environment that allows seamless flow of data between different functions. Among the few software tools that have emerged in recent year, Procore, a cloud-based construction project management software, has emerged as a widely used solution in the industry, enabling collaboration among …

Integrating Computer Vision In Construction Progress Monitoring: A Comprehensive Analysis And Future Perspectives, Muhammad Sami Rehman

Dissertations

This dissertation presents an in-depth exploration of the integration of Computer Vision (CV) in Construction Progress Monitoring (CPM), a field that has traditionally relied on manual and document-centric approaches. Such traditional CPM techniques lead to poor tracking of project progress, resulting in delays, cost overruns, bitter stakeholder relationships, schedule changes, and legislative proceedings to settle construction claims. The primary objective of this research is to investigate the potential of CV technology to transform CPM into a more efficient, accurate, and automated process. This is achieved through a series of comprehensive studies encompassing a systematic review, critical appraisal, barrier analysis, feature …

Relocating Lubra Village And Visualizing Himalayan Flood Damages With Remote Sensing, Ronan Wallace, Yungdrung Tsewang Gurung, Ryan Kastner

Journal of Critical Global Issues

As weather patterns change worldwide, isolated communities impacted by climate change go unnoticed and we need community-driven solutions. In Himalayan Mustang, Nepal, indigenous Lubra Village faces threats of increasing flash flooding. After every flood, residual muddy sediment hardens across the riverbed like concrete, causing the riverbed elevation to rise. As elevation increases, sediment encroaches on Lubra’s agricultural fields and homes, magnifying flood vulnerability. In the last monsoon season alone, the Lubra community witnessed floods swallowing several agricultural fields and damaging two homes. One solution considers relocating the village to a new location entirely. However, relocation poses a challenging task, as …

The Rebuild Project, Maria Del Valle

Symposium of Student Scholars

The Rebuild Island Project is meant to create relief for the islands that experienced hurricane damage. The project will be on the site of a city that has abandoned homes, unfiltered water, spoiled agriculture, and a damaged electrical grid. The city will be a self-sustaining city that focuses on cleaning up uninhabitable properties, building educational institutions, and creating community support for local Puerto Ricans. The project will not only be exclusive to Puerto Ricans, this model will be replicated for islands that go through natural disasters and neglectful government. This urban development will be seen through a 10-year plan or …

Practitioner Needs To Adapt To Sea-Level Rise: Distilling Information From Global Workshops, Daniella Hirschfeld, Ray Boyle, Robert J. Nicholls, David Behar, Miguel Esteban, Jochen Hinkel, Gordon Smith, David J. Hanslow

Landscape Architecture and Environmental Planning Faculty Publications

Climate-induced sea-level rise threatens the world’s coastal populations, critical infrastructure, and ecosystems. The science of sea-level rise (SLR) has developed to inform understanding of global climate mitigation and adaptation challenges, but there is much less engagement with practitioners to discern their climate services needs and support the development of adaptation planning and action on the ground. In addition, adaptation planning and implementation processes for SLR are relatively new and practitioners developing leading practices are seeking interaction with their peers and the SLR science community. To address these gaps, we co-produced online global workshops with sixty-nine practitioners from twenty-six countries. These …

Resilient Education Facilities With Special Focus On Classrooms To Be Compatible With The Covid-19 Crisis, Gehan Nagy, Gehan Nagy, Khaled Dewidar, Omar Atef A

Architectural Engineering

In recent months, the World Health Organization (WHO) expressed concern about the spread of a new pandemic after the COVID-19 pandemic, which had a significant impact on education. UNICEF says Over 168 million children’s classrooms around the world have been shuttered. Therefore, the main aim of this study is to identify the criteria and requirements of resilient design for classrooms to avoid closures during crises. Researchers have addressed the relationship between spaces and the spread of viruses inside them, so the research assumes that there is a relationship between the design criteria of classrooms and the spread of viruses inside …

The Impact Of American Kitchen Time-Use On Urban Design And Planning: A Case Study Of Baton Rouge, Louisiana, Farshid Torabian

LSU Doctoral Dissertations

Over the past century, the global environment has undergone significant changes, characterized by rising temperatures and a sharp increase in greenhouse gas emissions. Parallel to these environmental shifts, the U.S. has witnessed a tripling in energy demands, underscoring the pivotal role of household consumption in the nation's carbon footprint. Within this context, the kitchen, an integral component of the American home, becomes a focal point. Given that Americans predominantly spend their time indoors, it is imperative to understand the dynamics of kitchen usage and its broader implications on energy consumption and environmental impact. To delve into this complex interplay, this …

Evolution Of Sbs-Modified Asphalt Performance Under Aging And Rejuvenation Cycle Conditions, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Aboudou Wassiou Ogbon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Improving the poor long-term service performance of rejuvenated SBS-modified asphalt (REF-LT) is highly challenging. In this study, a blend of aged and virgin binders was used to rejuvenate REF-LT and the evolution of the asphalt performance was observed during regeneration and reaging processes. An SBS-modified asphalt (SBM) and base asphalt (BA) were mixed with REF-LT in specified ratios to prepare SBM- and BA-rejuvenated asphalts. The rejuvenated asphalts were subjected to short- and long-term aging. The high/low-temperature rheological properties, fatigue resistance, rejuvenation mechanism, and changes in the functional groups of the rejuvenated and reaged asphalts were characterized using a dynamic shear …

Characterization Of Alkali-Silica Reaction (Asr) Products And C-S-H Using Swir Spectroscopy For Nondestructive Detection Of Asr, Pengfei Ma, Wenyu Liao, Ying Zhuo, Hongyan Ma, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study explores the feasibility of characterizing alkali-silica reaction (ASR) products and calcium silicate hydrates (C-S-H) from short-wave infrared (SWIR) spectroscopy. ASR products and C-S-H samples with different Ca/Si ratios were synthesized and analyzed through XRD, 29Si nuclei magnetic resonance (NMR) and SWIR spectroscopy. Fourier-transform infrared spectroscopy (FTIR) was collected to help interpret the results from the SWIR spectroscopy. The obtained spectroscopic features were applied to quantify the ASR product abundance denoted by the length expansion of mortar bars after an accelerated ASR test. The results show that the SWIR spectra of the synthetic ASR gels are similar regardless of …

Numerical And Experimental Investigation Of Negative Stiffness Beams And Honeycomb Structures, Yasser Darwish, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Metamaterial structures that exhibit negative stiffness (MSNS) behavior have shown the potential to be used as energy dissipation systems in different applications. Negative stiffness honeycomb structures consist of multiple pre-buckled beams that snapping through from one pre-buckled mode to another buckled mode, when subjected to transverse loads, displaying negative stiffness, and dissipating a significant portion of the input energy. This paper presents finite element models (FEMs) developed to investigate the performance of negative stiffness pre-buckled beams and honeycombs. The FEMs were validated using experimental results of single pre-buckled beams and honeycomb structures. The experimental testing of the pre-buckled beams was …

Going Airborne: Kent State's Pioneering Leap Into Integrated Advanced Air Mobility, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

This proposal centers on the development of a Concept of Operations in Advanced Air Mobility (AAM). Kent State University's College of Aeronautics and Engineering is poised to pioneer the integration of drones and electric Vertical Takeoff and Landing (eVTOL) systems, bridging the gap between its campus and airport by transporting students and faculty the 3NM distance from campus to the airport and back by a UAV. Beyond a standard research initiative, this proposal signifies a groundbreaking effort to reshape the landscape of educational aeronautics and Advanced Air Mobility and Urban Air Mobility. Our overarching goal is to transcend conventional boundaries …

The Problem Of Communication Of The Sign And Symbol In The Design Of The Brand In Society: The Differences Resulting From Forgery And Imitation (Analytical Study), Sattar Al-Juboori Dr

Middle East Journal of Communication Studies

The research problem focused on studying the consequences of communicating through signs and symbols in the context of the current world, given the huge amount of diverse industrial and commercial products and the challenges related to distinguishing those products. The research aims to find out the problem of perception of the sign and symbol in the designs of logos and trademarks for the consumer, the role that the sign or symbol plays in the symbolic representation of the consumer, and the desires and motivations that the brand raises for the consumer in the purchasing process. The research community is limited …

Retraction Of Numerical Modeling Of An L-Shaped Very Stiff Concrete Retaining Wall, Mej Editorial Board

Mansoura Engineering Journal

This is a Retraction note

A Comparative-Analytical Based Approach To Improve Energy Efficiency In Office Buildings, Ahmed Mohamed Thabet Alieldin, Raghda Abdelwahab Othman

Mansoura Engineering Journal

Green Building Rating Systems (GBRSs) have spread worldwide to evaluate how buildings are related to sustainability criteria. On one hand, leadership in Energy and Environmental Design [1] was recognized to be one of the most prominent rating systems in all over the world. LEED gives importance to the energy category by giving it the highest weighting score. On the other hand, the Egyptian Green Pyramid Rating System (GPRS) has been established to expand the construction of green buildings in Egypt. The governmental codes, policies and strategies in Egypt play the main role in improving several codes in the …

Synergistic Effect Of Macro Synthetic Fiber And Shrinkage-Reducing Admixture On Engineering Properties Of Fiber-Reinforced Super-Workable Concrete, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to enhance fiber-reinforced super-workable concrete (FR-SWC) by optimizing the system of shrinkage-reducing admixture (SRA) and macro-synthetic fiber (MSF) for low shrinkage and uncompromised mechanical properties. A factorial design approach was employed to model the effect of fiber content, SRA dosage, and combined ratios of two types of MSF on performance of FR-SWC. MSF content had the greatest impact on mechanical properties, followed by SRA and MSF combination. Using MSF increased equivalent flexural strength ratio by 310% compared to the control mixture, regardless of MSF combination and SRA. SRA had the most significant effect on drying shrinkage, followed …

From Pumping To Deposition: A Comprehensive Review Of Test Methods For Characterizing Concrete Printability, Ali Fasihi, Nicolas A. (Ali) Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D concrete printing (3DCP) technology has gained significant attention in the construction industry due to its potential to revolutionize the way buildings are designed and constructed. However, successful application of 3DCP requires robust standard test procedures to characterize the printability of concrete. Printability is a measure of workability for a printing material in the 3DCP process, which is characterized by pumpability, extrudability, and buildability. This paper presents a comprehensive review of the test methods that could be used for material characterization during various printing steps, including pumping, extrusion, and layer deposition. The underlying mechanisms relevant to each step, key governing …

The Charge Forward: An Assessment Of Electric Vehicle Charging Infrastructure In New York City, Christopher S. Cali

Dissertations, Theses, and Capstone Projects

The federal and local New York City (NYC) governments are actively promoting Electric Vehicles (EVs). This capstone project assesses the state of EV charging infrastructure in NYC and its readiness for EV growth. NYC faces unique challenges due to its dense population and limited space for infrastructure. There's a significant disparity between the number of gas pumps and fast EV chargers in the city, with only 170 Level 3/DC (Direct Current) Fast Chargers publicly available. These Level 3 chargers are most important because they can charge an EV in 15 minutes; Level 2 chargers, also considered in the analysis, take …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Towards Sociobiogeochemistry: Critical Perspectives On Anthropogenic Alterations To Soil Nitrogen Chemistry Via U.S. Urban And Suburban Development, Christopher D. Ryan

Dissertations, Theses, and Capstone Projects

The ecological impacts of changes to land use are relevant to concerns about climate change, eutrophication of waterbodies, and reductions in biodiversity. As a foundational component of ecosystem functioning, changes to soil biogeochemistry have significant effects on overall ecosystem health. With cities continuing to grow and develop in extent, the impacts of urbanization and suburbanization on soils are of particular concern. Despite a wide range of natural climatic and geologic conditions, several factors have driven similar patterns of land transformation and management across the United States. In particular, federal initiatives including the Home Owners Loan Corporation, the Federal Housing Administration, …