Mechanical Engineering Commons^™

Modeling Of A New Structure Of Precision Air Conditioning System Using Secondary Condenser For Rh Regulation, Aries Subiantoro, Nasruddin Nasruddin, Feri Yusivar, Muhammad Idrus Al-Hamid, Bagio Budiardjo

Makara Journal of Technology

A dynamic mathematical model for a new structure of precision air conditioning (PAC) has been developed. The proposed PAC uses an additional secondary condenser for relative humidity regulation compared to a basic refrigeration system. The work mechanism for this system and a vapour-compression cycle process of the system are illustrated using psychrometric chart and pressure-enthalpy diagram. A non-linear system model is derived based on the conservation of mass and energy balance principles and then linearized at steady state operating point for developing a 8th-order state space model suited for multivariable controller design. The quality of linearized model is analyzed in …

Optimizing Fermentation Medium To Produce Cyclosporin A Using Response Surface Methodology, Rofiq Sunaryanto

Makara Journal of Technology

Response surface methodology (RSM) is a three factorial model which illustrates the relationship between one or more independent variables. RSM can be used to optimize the fermentation medium for the production of Cyclosporin A from the isolate Tolypocladium inflatum. The optimal point of the response surface area is predicted by using a seconddegree polynomial model and applying the statistic model obtained from the central composite design (CCD). The results of optimizing the fermentation medium for Cyclopsorin using the three independent variables of glucose, casein, and KH2PO4 show that all three of the independent variables affect the production of Cyclosporin A. …

Dynamic Scheduling For Unplanned Maintenance Work, Tejaswi Karempudi

Mechanical & Aerospace Engineering Theses & Dissertations

Ships are maintained at regular intervals in a scheduled manner. But there may be unexpected problems which necessitate immediate or as-soon-as-possible attention. These kinds of problem are handled through some type of Unplanned Maintenance Scheduling (UMS).

In a recent paper, Bao, Mittal and Dean I presented a method for planning and scheduling maintenance jobs using lean maintenance principles. In this method, the priority levels of the jobs are initially identified through a Maintenance Priority Evaluation Matrix (MPEM), then conflicts between the jobs because of personnel, tooling and spatial uses are taken into account concurrently to force a re-prioritization of the …

The Modified Coastal Storm Impulse Parameter, Sayed Gholamreza Mahmoudpour

Civil & Environmental Engineering Theses & Dissertations

The correlation of the morphological changes to the coast and storm characteristics is among interests of coastal engineers. Better understandings of a storm's potential forces ultimately lead engineers to safer designs and minimize the damages. Therefore, a need to quantify the storm potential forces to a storm parameter is evident. The desired storm parameter is to consider all the relative physical factors and is to present realistic results that then can be proven by actual nature response.

The concept of Coastal Storm Impulse (COSI) parameter was first introduced by Basco and Klentzman (2006) and is based on the conservation of …

A Unified Enterprise-Wide Cost Modeling Framework For Engineering Applications Based On Systems Engineering Principles, Yousuf S. Mohammed

Mechanical & Aerospace Engineering Theses & Dissertations

In the present research the problem of enterprise-wide cost modeling is approached from a systems engineering standpoint. What this does is to use each stage of product life cycle to obtain useful information that helps in estimating the cost of the system. Once a generic framework is developed for estimating the core cost, layers of other factors that affect the cost are applied to the core cost, such as risk and uncertainty, maintainability, supply-chain and socioeconomic conditions. The cost model is expanded to accommodate a product domain ranging from a simple object to a system in the following hierarchy: System, …

Evaluation Of Ocean-Energy Conversion Based On Linear Generator Concepts, Michael Allen Stelzer

Electrical & Computer Engineering Theses & Dissertations

A turbine generator is a device that converts mechanical rotation into electrical energy. Unfortunately, the primary driving force that has been used to provide this rotation has, thus far, been fossil fuels. Although fossil fuels have proven to be a reliable resource to continually supply the growing demand for electrical power, they are not without their financial and environmental drawbacks. With the continuously increasing demand for energy, it is hypothesized that the world may, in time, exhaust this precious natural resource and/or inflict permanent environmental damage upon our planet.

However, motions that occur in nature, such as ocean waves, can …

Design And Implementation Of A Z-Axis Mems Gyroscope With A Symmetric Multiple-Mass Mechanical Structure, Yujie Zhang

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents a z-axis MEMS gyroscope with a symmetric mechanical structure. The multiple-mass design prioritizes the sense-mode Quality Factor (Q) and thus improves its scale factor. The proposed mechanically coupled, dynamically balanced anti-phase sense-mode design minimizes energy dissipation through the substrate in order to maximize the Q. Numerical simulation is implemented in a finite element analysis software, COMSOL, to identify the two operation modes of the gyroscope: drive-mode and sense-mode. The multiple-mass gyroscope design is further fabricated using a one-mask process. Experimental characterization of frequency response in both drive-mode and sense-mode of the device are conducted, proving the design …

Dynamics And Control Of Satellite Relative Motion In Proximity Operations, Mohamed Elsayed Aly Abd Elaziz Okasha

Mechanical & Aerospace Engineering Theses & Dissertations

In this dissertation, the development of relative navigation, guidance, and control algorithms of an autonomous space rendezvous and docking system are presented. These algorithms are based on innovative formulations of the relative motion equations that are completely explicit in time. The navigation system uses an extended Kalman filter based on these formulations to estimate the relative position and velocity of the chaser vehicle with respect to the target vehicle and the chaser attitude and gyro biases. This filter uses the range and angle measurements of the target relative to the chaser from a simulated LIDAR system, along with the star …

Electrokinetic Transport Phenomena In Nanofluidic Devices, Mingkan Zhang

Mechanical & Aerospace Engineering Theses & Dissertations

Nanofluidic devices have wide potential applications in biology, chemistry and medicine, and have been proven to be very valuable in sensing biological particles (e.g., DNA and proteins) due to their efficiency, sensitivity and portability. Electrokinetic control of ion, fluid, and particle transport by using only electric field is the most popular method employed in nanofluidic devices. A comprehensive understanding of the electrokinetic ion, fluid, and particle transport in nanofluidics is essential for developing nanofluidic devices for the detection of single molecules, such as the next generation nanopore-based DNA sequencing technology. This research explored numerical simulation of electrokinetic ion and fluid …

Model Verification For Multi-Body Dynamics And Six Degree Of Freedom Machine Impact Testing, Scott James Tedesco

Mechanical & Aerospace Engineering Theses & Dissertations

Using MSC's ADAMS software, a multi-body dynamic model was created to represent a Six Degree of Freedom (Six DOF) Machine, located at the Old Dominion University Dynamic Environment Simulation Laboratory (DES Lab). This rigid body model was verified for single axis impact using experimental test data from the Six DOF Machine. Due to the large number of unknowns in the physical Six DOF Machine, a parameter sensitivity study was conducted to analyze critical parameters. This study provided data regarding machine performance, improved general understanding of the physical and mechanical operation of the Six DOF Machine, and guidance for parameter modeling …

Hybrid Bioreactor For Reduction Of Capital Costs, David J. Bayless

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A bioreactor with first and second containers has translucent sidewalls housing a plurality of planar membranes over which a slurry of water and photosynthetic microorganisms flows. A light collector is mounted adjacent a gap between the first and second containers for receiving incident light and conveying the light through optical waveguides, such as fibers, to distributors. The distributors are mounted in the first and second containers near a lower end of the substrates so that photons incident on the optical waveguides are conveyed through the optical waveguides to the light distributors and then to the lower ends of the substrates …

Characterization Of Centrifugally-Loaded Flame Migration For Ultra-Compact Combustors, Kenneth D. Lebay

Theses and Dissertations

The Air Force Research Laboratory (AFRL) has designed an Ultra Compact Combustor (UCC) showing viable merit for significantly reducing gas turbine combustor length making it a viable candidate for implementation as an inter-turbine burner and realization of efficiency benefits from the resulting near constant temperature cycle. This concept uses an off-axis combustor cavity and projects approximately 66% length reduction over a conventional combustor. The annular nature of the cavity creates high angular acceleration levels, on the order of 500-3500 g's, resulting in strong centrifugal and buoyant forces. This unique combination works to significantly reduce the required burn time and subsequently …

Sr2Fe1.5Mo0.5O6-Δ – Sm0.2Ce0.8O1.9 Composite Anodes For Intermediate-Temperature Solid Oxide Fuel Cells, Beibei He, Ling Zhao, Shuxiang Song, Tong Liu, Fanglin Chen, Changrong Xia

Faculty Publications

Sr₂Fe_1.5Mo_0.5O_6−δ (SFM) perovskite is carefully investigated as an anode material for solid oxide fuel cells with LaGaO₃-based electrolytes. Its electronic conductivity under anodic atmosphere is measured with four-probe method while its ionic conductivity is determined with oxygen permeation measurement. Samaria doped ceria (SDC) is incorporated into SFM electrode to improve the anodic performance. A strong relation is observed between SDC addition and polarization losses, suggesting that the internal SFM-SDC contacts are active for H₂ oxidation. The best electrode performance is achieved for the composite with 30 wt% SDC addition, resulting …

Combustion Simulations Using Graphic Processing Units, Mingjie Wang

Master's Theses

Graphic processing units (GPUs) are powerful graphics engines featuring high levels of parallelism and extreme memory bandwidth, which constitute a powerful computing platform to solve complex problems involving chemically reacting flows. In the present study, computer programs for combustion simulations with detailed chemical kinetic mechanisms were compiled in the Compute Unified Device Architecture (CUDA) language for NVIDIA GPU architecture. Ignition processes were simulated under constant pressure and constant volume conditions using an explicit 4^th order Runge-Kutta algorithm for time integration. Sufficiently small time steps were identified with time scale analysis to ensure the integration stability. The program was validated …

A Ceramic-Anode Supported Low Temperature Solid Oxide Fuel Cell, Hanping Ding, Junjie Ge, Xingjian Xue

Faculty Publications

We report the fabrication and evaluation of a ceramic-anode supported button cell LSCM-SDC/SDC/PBSC (thickness 400 μm/20 μm/20 μm). The anode/electrolyte assembly LSCM-SDC/SDC was co-fired at low temperature of 1250°C, where a slight amount of CuO was mixed with LSCM. The CuO (20.3 wt%) were impregnated into the porous substrate to enhance current collecting effect. The cell exhibited power density of 596 mWcm−2 and 381 mWcm−2 at 700°C with wet hydrogen and methane as the fuel respectively, where the silver paste was used as current collectors, the highest performance up to date for the cells with metal oxide anodes at this …

Life-Cycle Cost Analysis Of Alternative Reinforcement Materials For Bridge Superstructures Considering Cost And Maintenance Uncertainties, Christopher D. Eamon, Elin A. Jensen, Nabil F. Grace, Xiuwei Shi

Civil and Environmental Engineering Faculty Research Publications

A life cycle cost analysis (LCCA) was conducted on prestressed concrete bridges using carbon fiber reinforced polymer (CFRP) bars and strands. Traditional reinforcement materials of uncoated steel with cathodic protection and epoxy-coated steel were also considered for comparison. A series of deterministic LCCAs were first conducted to identify a range of expected cost outcomes for different bridge spans and traffic volumes. Then, a probabilistic LCCA was conducted on selected structures that included activity timing and cost random variables. It was found that although more expensive initially, the use of CFRP reinforcement has the potential to achieve significant reductions in life …

Estimated Instability And Breaking Of Internal Waves Due To Time-Dependent Shear, Leonardo A. Latorre

Theses and Dissertations

The effects of propagation of a short internal gravity wave through an inertia wave on internal wave stability is analyzed and parameterized. The interactions are specifically between a short wave packet and a large inertia wave packet. The short wave packet is a wave bounded with a Gaussian envelope with high frequencies and scales in the hundreds of meters horizontally and tens of meters vertically. The inertia wave packet is also an enveloped wave but with frequencies close to the rotation of the earth and scales in the thousands of meters in the horizontal and hundreds of meters in the …

Numerical Investigation Of Internal Wave-Vortex Dipole Interactions, Tyler D. Blackhurst

Theses and Dissertations

Three-dimensional linear ray theory is used to investigate internal waves interacting with a Lamb-Chaplygin pancake vortex dipole. These interactions involve waves propagating in the same (co-propagating) and opposite (counter-propagating) horizontal directions as the dipole translation. Co-propagating internal waves in the vertical symmetry plane between the vortices of the dipole can approach critical levels where the wave energy is absorbed by the dipole or where the waves are overturned and possibly break. As wave breaking cannot be simulated with this linear model, changes in wave steepness are calculated to aid in estimating the onset of breaking. Counter-propagating internal waves in the …

Failure Mechanisms And Texture Evolution Of Wrought Az31b Magnesium At Temperatures Ranging From 25 C To 125 C, Jonathan Michael Scott

Theses and Dissertations

Failure mechanisms were studied in wrought AZ31B magnesium alloy under different strain paths and various temperatures. Optical micrographs were used to observe the formation of shear bands and regions of high twin density in samples strained under uniaxial, biaxial and plane strain conditions. Interrupted testing at 4% effective strain increments until failure was used to observe the evolution of the microstructure. Results showed that shear bands with a high percentage of twinned grains appeared early in the samples strained under biaxial or plane strain tension. These bands are similar to the failure region in uniaxial tension specimens. A forming limit …

Buckling Failure Boundary For Cylindrical Tubes In Pure Bending, Daniel Peter Miller

Theses and Dissertations

Bending of thin-walled tubing to a prescribed bend radius is typically performed by bending it around a mandrel of the desired bend radius, corrected for spring back. By eliminating the mandrel, costly setup time would be reduced, permitting multiple change of radius during a production run, and even intermixing different products on the same line. The principal challenge is to avoid buckling, as the mandrel and shoe are generally shaped to enclose the tube while bending. Without the shaped mandrel, buckling will likely occur sooner, that is, at larger bend radii. A test apparatus has been built for arborless bending. …