Mechanical Engineering Commons^™

Cold Climate Field Test Analysis Of An Air-Source Heat Pump With Two-Stage Compression And Economizing, Stephen Lance Caskey

Open Access Theses

A Department of Defense project was established to conduct a field demonstration led by Purdue University with several industry partners. The technology investigated was an air-source, two-stage heat pump with closed-loop economizing. The field demonstration site was a military barracks on a National Guard base, Camp Atterbury, in southern Indiana. Two heat pumps were built at the Ray W. Herrick Laboratories and installed into two almost identical, barracks buildings. Data on the heat pump operation and building conditions were to be collected over an entire heating season. Due to complications with the system, the amount of runtime data collected from …

Age-Related Changes To The Production Of Linguistic Prosody, Daniel Richard Barnes

Open Access Theses

The production of speech prosody (the rhythm, pausing, and intonation associated with natural speech) is critical to effective communication. The current study investigated the impact of age-related changes to physiology and cognition in relation to the production of two types of linguistic prosody: lexical stress and the disambiguation of syntactically ambiguous utterances. Analyses of the acoustic correlates of stress: speech intensity (or sound-pressure level; SPL), fundamental frequency (F0), key word/phrase duration, and pause duration revealed that both young and older adults effectively use these acoustic features to signal linguistic prosody, although the relative weighting of cues differed by group. Differences …

Autonomous Orientation And Geolocation Via Celestial Objects, Cheng Liu

Open Access Theses

Based on a hemispherical sensor geometry, a novel celestial navigation system is developed to use celestial objects to determine the absolute location and orientation information without the aid of satellites via two different approaches.

The first approach employs a hemispherical arrangement of light intensity sensors to determine the vector to the dominant light source. We present the sensing system to measure the sun vector via least squares method and achieve the application of a low-cost, small-sized solar compass. The system is shown to work well under ideal conditions but is susceptible to noise and uncertainties in some situations.

The second …

Adaptive Nonlinear Control For Autonomous Ground Vehicles, William Spencer Black

Open Access Theses

We present the background and motivation for ground vehicle autonomy, and focus on uses for space-exploration. Using a simple design example of an autonomous ground vehicle we derive the equations of motion. After providing the mathematical background for nonlinear systems and control we present two common methods for exactly linearizing nonlinear systems, feedback linearization and backstepping. We use these in combination with three adaptive control methods: model reference adaptive control, adaptive sliding mode control, and extremum-seeking model reference adaptive control. We show the performances of each combination through several simulation results. We then consider disturbances in the system, and design …

A Study Of Inkjet Printed Line Morphology Using Volatile Ink With Non-Zero Receding Contact Angle For Conductive Trace Fabrication, Chenchao Shou

Open Access Theses

Inkjet printed lines on a homogeneous solid substrate are studied under the condition that ink evaporation is not negligible and the contact angle exhibits hysteresis with non-zero receding contact angle (NRCA). A new family of line instability is discovered, featured by formation of agglomerations within a line. The agglomeration is explained by a hydrodynamic flow that consistently drives a bead on the substrate towards fresh deposited droplets due to concentration-induced surface tension gradient. Morphologies of lines printed with multiple layers are also explored for the purpose of conductive trace fabrication. A non-uniform morphology is observed across a multi-layer line when …

Operational Modal Analysis And Force Characterization Of An Unstable Liquid Rocket Engine, Kevin Charles Buechele

Open Access Theses

Combustion instability has plagued the rocket industry since its beginnings. It is characterized by sustained pressure oscillations in the combustion chamber due to the coupling of natural pressure fluctuations with unsteady heat release. Typically, combustion instabilities are identified and mitigated during ground testing. Occasionally combustion instabilities do not present themselves until after a system is fielded and may only occur in a flight environment. While ground tests are heavily instrumented, operational flight data may not contain any direct measurement of the combustion forcing function. Post-event efforts to characterize anomalous combustion instabilities with existing instrumentation have had little success.

Accelerometers, which …

Performance-On-Demand Mems (Podmems): Electrical Control Of Effective Mass, Damping, And Stiffness, Shehrin Sayed

Open Access Theses

We propose the use of electrostatic force feedback to control the stiffness, damping, or mass of MEMS. If feedback forces are proportional to sensed displacement, velocity, or acceleration of a MEMS proof mass, then feedback can be used to increase or decrease the apparent stiffness, damping, and or mass of the MEMS. Such feedback can be used to compensate for process variations, packaging stress, thermal drift, viscous damping, etc. Prior efforts by others include position or velocity based feedback for modifying frequency, bandwidth, quality factor, or sensitivity of resonators. We present a means of quantitative control of stiffness, damping, and …

Strategy For Health Monitoring And Fault Detection In Heavy-Duty Diesel Engines, Aniketjayant Vagha

Open Access Theses

Performance tuning, health monitoring, fault diagnosis, etc. are important aspects of testing a pre-production engine out in the field. To fulfill these tasks, a robust data-based strategy for detecting anomalies in diesel engines is proposed in this work. Such a strategy separates the healthy data from outlying, anomalous trends of faulty data. The data classifier used here is based on fundamental principles of statistical learning and derived from linear discriminant analysis.

Further efforts to improve the classification performance led to the finding that steady state data makes for a more accurate classification of the working conditions of individual trucks. Hence …

Health Diagnosis Of Lithium-Ion Battery Cell Using Vibration-Based Test And Analysis, Huan Le Pham

Open Access Theses

With their superior advantages of high capacity and low percentage of self-discharge, lithium-ion batteries, which are most commonly used as power sources for hand-held electronic devices, have become the most popular choice for power storage in electric vehicles. Due to the increased potential for long life of lithium-ion batteries in vehicle applications, manufacturers are pursuing methodologies to increase the reliability of their batteries. Methods are now being developed to monitor the health of lithium-ion batteries throughout their life cycle. The work in this thesis is focused on utilizing non-destructive vibration diagnostic testing methods to monitor changes in the physical properties …

Modeling Of Legged Locomotion With A Suspended Load In The Sagittal Plane, Karna P. Potwar

Open Access Theses

Walking or running while carrying loads has always been a tedious task, more so when the loads are heavy. Such a task of carrying loads not only requires extra effort but also leads to physical pain and in some cases injury. Prior studies on human locomotion with a suspended load have used models that are restricted in their DOFs and so are not able to take into account the fore aft movement in human beings. The objective of this thesis is to model the dynamics of sagittal plane center-of-mass locomotion with a suspended load and apply findings to carrying loads …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

Rotor Blade Operational Data Analysis Methods And Applications For Health Monitoring Of Wind Turbines Using Integrated Blade Sensing, Noah Jacob Myrent

Open Access Theses

Wind energy is one of the fastest growing sources of power production in the world today. In order to extract the maximum potential amount of energy from the wind, a wind turbine's reliability must be a top priority. As utility scale wind turbines increase in size and initial capital investment cost, there also comes an increasing need to monitor the health of the turbine. Currently, most wind turbines do not incorporate blade mounted inertial sensing in addition to blade strain measurements. This approach has the potential to detect inevitable blade damage types early on so that a maintenance schedule can …

Fatigue Behavior And Microstructure Examination Of Aisi D2 Trim Dies, Xinchen Wang

Wayne State University Theses

AISI D2 steels are widely used as tools for forming, drawing and trimming dies due to its high wear resistance, high compressive strength and low distortion, and its performance as a trim die material for cutting ultra-high strength steels (at 1GPa or above) is investigated in this study.

To simulate the production trimming process under a laboratory accelerated fatigue condition, a trim die simulator and testing technique have been developed. In this test 1" cubic die samples were used that offers total 12 cutting edges of 6 different material grain orientations in shearing, and with adjustable die clearance. A non-contact …

Mechanical And Electro-Chemical Investigation Of Carbon Farbric/Epoxy And Aluminum Foam Sandwich Composite Beams, Narin Sara Fatima

Wayne State University Theses

In this study the mechanical and electrochemical response of a sandwich composite comprising of carbon fiber fabric skin and aluminum foam core was evaluated. The three point flexural test was chosen to investigate the mechanical behavior in terms of finding the deformation and failure behavior. The flexural test exhibited an excellent bond between the skin and the core. The specimens mainly failed in three different modes - indentation, core shear and face yielding and showed three distinct regions: a linear rise in load with displacement region, a rapid load drop region and a plateau region followed by a densification region. …

Gaseous Corrosion In Hard Disk Drive: A Computational Study, Hardik Shah

Mechanical and Aerospace Engineering Theses - Archive

HDD is the largest digitally encoded data storage device. HDD is used to store digital data in data centers, computers and laptops. A typical HDD consists of a casing, an actuator arm, actuator axis, head, platters, power connectors, and jumper pins. The platter is made up of non-magnetic material and is covered by magnetic material, which stores the data. The magnetic heads are mounted on a moving actuator arm to read and write the data. One of the modes of failure of a HDD is corrosion. The parts of the HDD are corroded by coming in contact with the contaminants. …

Techno- Economic Analysis Of Wastewater Biosolids Gasification, Jason M. Porter, Nick Lumley, Robert Braun, Tzahi Cath, Ana Prietro, Dotti Ramey, Greta Buschmann

Faculty Publications

Wastewater treatment biosolids, commonly referred to as sludge, is a dilute suspension of micro-organisms, noxious organic matter, and mineral species in up to 99% water. Sludge is produced at about 250 mg/L of mixed municipal and light industrial wastewater treated. Management of this process stream can present a financial and environmental challenge for wastewater treatment plants (WWTPs), accounting for up to 15% of plant energy consumption. Operators of small urban WWTPs see the greatest challenge as their operations do not benefit from economies of scale, which permit larger facilities to absorb the costs or footprint of anaerobic digestion. This work …

Electrochemical Explanation For Asymmetric Electrowetting Response, Mehdi Khodayari, Nathan B. Crane, Alex A. Volinsky

Faculty Publications

In electrowetting, a droplet/substrate contact angle is modulated by applying a potential difference between the droplet and the substrate. Typically, the droplet potential is changed via an auxiliary electrode dipped in the droplet. Here, it is shown that electrochemical reactions lead to a potential drop on the auxiliary electrode in electrowetting, which degrades the droplet contact angle modulation. The magnitude of this effect depends on the voltage polarity. This problem can be addressed by using a dielectric layer, such as SiO2, which can prevent electrochemical reactions with the electrowetting substrate and the auxiliary electrode.

Monitoring Damage Initiation And Growth In Composite Structures By Acoustic Emission Method, Kassahun Mekonnen Asamene

Dissertations

In this dissertation, acoustic emission technique is examined as candidate for monitoring the integrity of polymer matrix structural members. Acoustic emission technique has so far been largely limited to laboratory tests and field applications have been mostly limited to qualification tests of aerospace structures. The lack of quantitative indications of damage in composite structural members associated with the complex nature of damage in these materials has been a limiting factor. Generally, a number of failure modes operate simultaneously at a site of damage, and each of these failure modes generates a different type of acoustic emission signal. In addition, issues …

Effect Of Doping On Β-Tricalcium Phosphate Bioresorbable Bulk Material And Thin Film Coatings, Suhaila Abdalla

Dissertations

Magnesium has emerged as a revolutionary biodegradable metal for use as an orthopedic material, it has several advantages over the permanent metallic materials currently in use, including eliminating the effects of stress shielding, improving biocompatibility and degradation properties, thus removing the requirement of a second surgery for implant removal. Due to the rapid degradation of magnesium, it is necessary to control the corrosion rates of the materials to match the rates of bone healing. This dissertation reports on the effect of doping on the properties of β-tricalcium phosphate (β-TCP). It also reports on its application as a thin film coating …

Multiphase Hydrodynamics In Steady And Pulse Jet Mixing Systems, Ibraheem R. Muhammad

Dissertations

The goal of the present study is to evaluate the mixing performance of jet mixers in both liquid and solid-liquid mixing processes. Jet mixers have been studied for decades for its uses in liquid blending and solid-liquid mixing applications. In solid suspension processes, jet mixers can be just as useful if not more useful than conventional impeller mixers. However, there is a lack of phenomenological models that exist. The erosion and subsequent suspension of solids beds, as well as the suspension of a low concentration of solid particles must be better understood. The specific objectives were to develop analytical, experimental …