Mechanical Engineering Commons^™

Reliability Analysis Of Reinforced Concrete Columns Exposed To Fire, Christopher D. Eamon, Elin A. Jensen

Civil and Environmental Engineering Faculty Research Publications

A reliability analysis is conducted on reinforced concrete columns subjected to fire load. From an evaluation of load frequency of occurrence, load random variables are taken to be dead load, sustained live load, and fire temperature. Resistance is developed for axial capacity, with random variables taken as steel yield strength, concrete compressive strength, placement of reinforcement, and section width and height. A rational interaction model based on the Rankine approach is used to estimate column capacity as a function of fire exposure time. Various factors were considered in the analysis such as fire type, load ratio, reinforcement ratio, cover, concrete …

An Analysis Of Sound Exposure In A University Instrumental Music Rehearsal Venue, Joe Farmer, Nelson Fumo, Michael Thrasher

Mechanical Engineering Faculty Publications and Presentations

The purpose of this study is to collect and analyze the sound load exposure of a population of university music students participating in instrumental music ensemble rehearsals

Multi-Physical Study Of Mems Resonators And Oscillators, Xiaobo Guo

Electronic Theses and Dissertations

First, this research presents experimental and theoretical investigation of the response of micro scale dual-plate thermal-piezoresistive resonators (TPR) and self-sustained oscillators (TPO) to different gases and pressures. It is demonstrated that the resonant frequency of such devices follows particular trends in response to the changes in the surrounding gas and its pressure. A mathematical model has been derived to explain the damping dependent frequency shift characteristic of TPO. The solution of the model indicates that the stiffness of the actuator beam decreases as the value of damping coefficient drops at lower gas density caused by the change in the gas …

A Finite Element Model Based On Coupled Refined High-Order Global-Local Theory For Static Analysis Of Electromechanical Embedded Shear-Mode Piezoelectric Sandwich Composite Beams With Various Widths, S.B. Beheshti-Aval, S. Shahvaghar-Asl, M. Lezgy-Nazargah, Mohammad N. Noori

Mechanical Engineering

In this study, a new theory for the accurate simulation of the shear-mode behaviour of thin or thick piezoelectric sandwich composite beams is developed. The effects of transverse normal stress and transverse flexibility of layers are considered in the development of the proposed formulation. In order to increase the computational accuracy, all kinematic and stress continuity conditions are satisfied at layer interfaces. Moreover, for the first time, both the electrically induced strain components and the transverse flexibility are taken into account in the proposed formulation. Despite the fact that the number of unknown mechanical parameters in this theory is only …

Nineteenth Century North American And Pacific Tidal Data: Lost Or Just Forgotten?, Stefan A. Talke, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

Tide data are the oldest and longest oceanographic records and comprise one of the few tools for understanding, quantifying, and separating century-scale human and climate impacts on the coastal zone. Our archival research indicates that continuous measurements of tides began in 1844 in the western Atlantic, 1853 in the Eastern Pacific, and 1858 in the Western Pacific. At least 50 multiyear tide series existed by the year 1900. With few exceptions, however, these 19th and early 20th century measurements have not been analyzed in more than a century and have been forgotten and neglected by the scientific community. This article …

Twelve Days Of Christmas Mechatronic Display, Michael Beltran, Christine Hagerman, Katie Ruhm

Mechanical Engineering

No abstract provided.

Rheological Investigation Of The Shear Strength, Durability, And Recovery Of Alginate Rafts Formed By Antacid Medication In Varying Ph Environments, Brooke M. Elliott, Kathleen E. Steckbeck, Lisa R. Murray, Kendra Erk

School of Materials Engineering Faculty Publications

The mechanical response of alginate rafts formed by mixing liquid alginate antacid medication (Gaviscon® Extra Strength Liquid Antacid) with acidic solutions was investigated by deforming isolated rafts in a shear rheometer. As rafts were deformed to varying magnitudes of applied strain, rheological parameters were identified and related to the overall strength, durability, and recoverability of rafts formed at different pH (1.1 – 1.7) and aging conditions (0.5 – 4 hr). Rafts formed in the lowest acidity solutions (pH 1.4, 1.7) were elastically weak (G₀’ = 60, 42 Pa for un-aged raft) yet maintained their elasticity during applied …

Design And Implementation Of Eight-Legged Robotic Transporter, Jeremy David Depangher

Master's Theses

This thesis contains the design, manufacturing, and testing of a functional eight-legged robotic transporter based on the concept design laid out in U.S. Patent 7,246,671. The device is intended to achieve three different sequences of motion: regular driving, obstacle climbing, and stair climbing. The prototype was carried through concept design, analysis, selection of materials and components, manufacturing, software development, and final assembly and testing. The device can be assembled under multiple configurations, which harbor certain advantages and disadvantages. The results of the testing encourage the continuation of a second iteration of this concept.

Robotic Fingerspelling Hand For The Deaf-Blind, Jerry Vin

Master's Theses

Because communication has always been difficult for people who are deaf-blind, The Smith-Kettlewell Eye Research Institute (SKERI), in conjunction with the California Polytechnic State University Mechanical Engineering department, has commissioned the design, construction, testing, and programming of a robotic hand capable of performing basic fingerspelling to help bridge the communication gap. The hand parts were modeled using SolidWorks and fabricated using an Objet rapid prototyper. Its fingers are actuated by 11 Maxon motors, and its wrist is actuated by 2 Hitec servo motors. The motors are controlled by Texas Instruments L293D motor driver chips, ATtiny2313 slave microcontroller chips programmed to …

Scalar Differential Equation For Slowly-Varying Thickness-Shear Modes In At-Cut Quartz Resonators With Surface Impedance For Acoustic Wave Sensor Application, Huijing He, Jiashi Yang, John A. Kosinski

Department of Mechanical and Materials Engineering: Faculty Publications

For time-harmonic motions, we generalize a 2-D scalar differential equation derived previously by Tiersten for slowly-varying thickness-shear vibrations of AT-cut quartz resonators. The purpose of the generalization is to include the effects of surface acoustic impedance from, e.g., mass layers or fluids for sensor applications. In addition to the variation of fields along the plate thickness, which is considered in the usual 1-D acoustic wave sensor models, the equation obtained also describes in-plane variations of the fields, and therefore can be used to study the vibrations of finite plate sensors with edge effects. The equation is compared with the theory …

Nonlinear Energy Harvesting Under White Noise, Qifan He

All Theses

While purposeful introduction of stiffness nonlinearities into the dynamics of energy harvesters is aimed at enhancing performance under non-stationary and random excitations, most of the conclusions reported in the current literature are based on the steady-state response which assumes a harmonic fixed-frequency excitation. As a result, we still do not have a clear understanding of how the nature of the excitation influences the output power, or what role stiffness nonlinearities play in the transduction of energy harvesters under random excitations. To fill this gap in the current knowledge, this thesis investigates the response of nonlinear mono- and bi-stable energy harvesters …

Performance Analysis Of Non-Linear Adaptive Control Laws Using Hardware In The Loop Of An Unmanned Aerial System, Brendon Lyons

Doctoral Dissertations and Master's Theses

In practical applications, an Unmanned Aerial System's (UAS) baseline performance is dictated by how well it can follow a given trajectory with limited stress on the actuators. However, these can be insufficient performance metrics when the UAS is allowed to adapt to an unpredicted external influence such as turbulence or actuation failure, while maintaining a satisfactory baseline performance.

In this thesis, different control laws based on the formation flight geometry problem, nonlinear dynamic inversion and an artificial immune system adaptive mechanism , are implemented in hardware-in-the-loop as a precursor for in-flight testing. These controllers are compared based on three performance …

Enhanced Reversibility And Durability Of A Solid Oxide Fe–Air Redox Battery By Carbothermic Reaction Derived Energy Storage Materials, Xuan Zhao, Xue Li, Yunhui Gong, Kevin Huang

Faculty Publications

The recently developed solid oxide metal–air redox battery is a new technology capable of high-rate chemistry. Here we report that the performance, reversibility and stability of a solid oxide iron–air redox battery can be significantly improved by nanostructuring energy storage materials from a carbothermic reaction.

Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …

Active Dense Tensegrity Structure: A Novel Concept For Shape Morphing Structures, Zhiwei Wu, Thomas Siegmund

The Summer Undergraduate Research Fellowship (SURF) Symposium

Shape morphing is of relevance for advanced engineering systems such as future aerospace vehicles. Tensegrity structures, a structure comprised of a set of discontinuous compressed struts held together with a continuous web of tensioned cables, can function as the foundation of a shape morphing system (Keith et al, 2007). However, the classic tensegrity structures may not be ideal in all configurations because the space within the structure is not utilized. As an alternative, the present work proposes a dense tensegrity system as an assembly of cables carrying tensions only and polyhedral elements under compression only. An active dense tensegrity can …

Radiation Intensity Of A Turbulent Sooting Ethylene Flame, Ryan M. Hartman, Jay P. Gore

The Summer Undergraduate Research Fellowship (SURF) Symposium

Turbulent sooting flame radiation is relevant to applications ranging from fire safety to gas turbine engines. The complex direct interactions of soot and radiation intensity are of particular importance when creating accurate soot prediction models. Previous studies have measured gas-band and broadband radiation intensity from turbulent sooting flames. The focus of the current study is the characterization of radiation intensity emanating from soot. A high-speed infrared camera (FLIR Phoenix) was used to acquire time-dependent quantitative images of radiation intensity of a turbulent sooting ethylene flame. The flame had a Reynolds number of 15,200 and was stabilized on a burner with …

Computer Simulation Study Of Slipper Lubrication In Hydraulic Machines, Jordyn B. Miller, Monika Ivantysynova

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydraulic pumps and motors are vital components used in many applications today. Specifically, the axial piston pump is important because it is reliable, relatively compact, and has a high horsepower-to-weight ratio. These features make this type of pump very advantageous in hydraulic systems. Maintaining proper lubrication between surfaces in an axial pump, such as the slipper and swashplate, is imperative in order to have smooth operation of the system and prevent metal-to-metal contact. The aim of this research is to find the optimal slipper design and fluid film thickness to simultaneously maintain a balanced pressure and decrease power loss in …

Thin Electrical Double Layer Simulation Of Micro-Electrochemical Supercapacitors, Kaitlyn Fisher, Guoping Xiong, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

The deteriorating state of the environment has drawn many people to hybrid electric vehicles. Electrochemical micro-supercapacitors are of interest in this field because of their high power density relative to other micro-power sources. However, little is known about how the properties of the electrolyte used affect the performance of such devices. The first step of this investigation was to use thermoreflectance microscopy to measure the temperature change of the electrodes while charging and discharging supercapacitor samples. The components of these samples were graphitic petal electrodes with a Ti/Au covering (for enhanced light reflectance) on a SiO₂ base, with a …

Phase-Field Dislocation Dynamics Code Optimization, Jaime A. Perez, Marisol Koslowski

The Summer Undergraduate Research Fellowship (SURF) Symposium

The importance of the study of nanocrystalline materials has gained a huge amount of attention these years due to its extraordinary mechanical, electrical and chemical properties. One significant way to progress in this field is by simulating the behavior of the particles in nano scale, which is not only a need but a challenge due to massive interactions that occur there. The phase-field dislocation dynamics (PFDD) method has been successfully employed in the modeling of plastic deformation, creep and grain boundary sliding. In PFDD, the plastic strain and the energy are functions of phase fields that obey a set of …

Advanced Visualization Techniques Of Hot-Jet Combustion Of Lean And Ultra-Lean Substances, Timothy I. Machin, Li Qiao

The Summer Undergraduate Research Fellowship (SURF) Symposium

Research has been conducted on ignition of natural gas as a potential replacement for fossil fuels. A reason natural gas is not widely used and adapted is because of the harmful emissions created when combusted in rich mixtures, but if the gas can be burned at a lean or ultra-lean equivalence ratio, these emissions can be reduced or even eliminated. One method of burning lean and ultra-lean substances is by use of hot-jet ignition. This method ignites the substance near its combustion temperature, reducing the harmful emissions. This method is not yet fully understood, and so research must be done …