Mechanical Engineering Commons^™

Design Optimization Of The Heat Transfer Model For A High Heat Flux Test Facility, Linda Hyemin Yoon

Open Access Theses & Dissertations

There are a variety of fuels that are utilized for space applications and in recent years, environmentally friendly fuels have been of interest. In the case of bipropellant rocket systems, hydrocarbon fuels have come to the attention of scientists and engineers. In particular, liquid methane was of interest in this study because of its physical and chemical advantages over other fuels, such as liquid hydrogen. Rocket engines rise to very high temperatures and to avoid catastrophic mechanical failure, a cooling system must be implemented within the engine to cool the walls. To get a better understanding of the fluid flow …

A Circuit-Based Algorithm For Two-Phase Flow At The Pore Scale In Porous Media, Todd Dorethy

Open Access Theses & Dissertations

Models of two-phase flow in porous media are of practical interest in many fields of science and engineering such as in oil recovery and hydrology. For this class of problem, an immiscible fluid is injected into a single-phase, porous medium to evict its valuable, native fluid. Because the aim is to amass as much of the indigenous fluid as possible, models attempt to output reliable flow regime patterns depicting how well the invading fluid displaces the native fluid.

Flow regime patterns generally depend upon the geometry of the domain, stimulation at the boundaries, and properties of the invading and native …

An Experimental Investigation Of The Cooling Channel Geometry Effects On The Internal Forced Convection Of Liquid Methane, Adrian Trejo

Open Access Theses & Dissertations

Rocket engine fuel alternatives have been an area of discussion for use in high performance engines and deep spaceflight missions. In particular, LCH4 has showed promise as an alternative option in regeneratively cooled rocket engines due to its non-toxic nature, similar storage temperatures to liquid oxygen, and its potential as an in situ resource. However, data pertaining to the heat transfer characteristics of LCH4 is limited. For this reason, a High Heat Transfer Test Facility (HHTTF) at the University of Texas at El Paso's (UTEP) Center for Space Exploration Technology and Research has been developed for the purpose of flowing …

Numerical Prediction Of Collection Efficiency Of A Personal Sampler Based On Cyclone Principle, Antara Badhan

Open Access Theses & Dissertations

A personal bioaerosol sampler is a self-contained, operation flexible, high-efficient device for indoor air quality (IAQ) and health risk exposure monitoring and measurement. Bio-aerosols such germ-laden viruses, microbial species, airborne microorganisms and volatile organic compounds (VOC) are sucked into the sampler and are deposited on the inner wall surface based on cyclone principal. The major concern with bio-aerosol samplers is the collection efficiency. In this study, we used computational fluid dynamics (CFD) tools to evaluate key design parameters, specifically the inlet tube angle and collection tube inner wall roughness. 3D incompressible turbulent flow was simulated using commercial software ANSYS FLUENT. …

Gas-Solid Bed Hydrodynamics Of Non-Spherical Particles, A S M Raufur Rahim Chowdhury

Open Access Theses & Dissertations

Gas-solid beds are ubiquitous in industrial and energy production applications. Examples include fluidized beds, which are used in many systems such as in Integrated Gasification Combined Cycle (IGCC) power plants or in chemical looping systems. These examples and others involve complicated interactions between each phase of reactants in the system. The motivation of this work stems from the need for a better understanding of bed hydrodynamics in existing energy systems; results from this work can be used directly in software such as Fluent to more accurately predict flow behaviors of gas and solid phases. The experimental data are collected from …

A Study On The Role Of Physical Models In The Mitigation Of Design Fixation, Vimal Viswanathan, Olufunmilola Atilola, Nicole Esposito, Julie Linsey

Faculty Publications, Mechanical Engineering

Designers implement a variety of models and representations during the design process, yet little is known about the cognitive impacts of various representations. This study focuses on how physical models can assist novices in mitigating design fixation on undesirable features. During idea generation, designers tend to fixate on examples they encounter or on their own initial ideas. The first hypothesis states that designers tend to duplicate features of provided examples. The second hypothesis states that this fixation can be mitigated with appropriate warnings. The last hypothesis is that building and testing physical models can help designers in mitigating fixation. To …

Crack Self-Healing In Sic/Spinel Nanocomposite, Fariborz Tavangarian

LSU Doctoral Dissertations

Spinel is one of the best known and widely used ceramic materials. It has good thermal shock resistance, high chemical inertness in both acidic and basic environments, excellent optical and dielectric properties, high strength at both elevated and normal temperatures, and has no phase transition up to the melting temperature (2135°C). Spinel is used in the metallurgical, electrochemical, and chemical industrial fields. It has also found some applications in dentistry, catalyst supports, humidity sensors, reinforcing fibers, photoluminescent materials, etc. One of the limitations of spinel ceramic is its brittleness. Furthermore, at high temperature applications, a rapid heating or cooling can …

Meso-Scale Analysis Of Deformation Induced Heating In Granular Metalized Explosives By Piston Supported Waves, Sunada Srinath Nagamani Chakravarthy

LSU Doctoral Dissertations

Shock sensitivity of heterogeneous explosive composites is dependent on the formation of hot-spots which are small regions of elevated temperatures within the material. Changes in the initial meso-structure (i.e. packing density, composition, particle size and shapes) of the explosives can significantly alter the hot-spot fields in the material and thereby affect its shock sensitivity. In this study, an explicit, 2D, Lagrangian finite and discrete element technique is used to numerically simulate the deformation induced heating of granular mixtures of explosive (HMX), and metal (Al) particles due to piston supported uniaxial deformation waves (400 ≤ Up ≤ 800 m/s). A number …

The Effects Of Asymmetric Micro Ratchets On Pool Boiling Performance, Lance Austin Brumfield

LSU Doctoral Dissertations

Nucleate boiling is an attractive method for achieving high heat flux at low superheat temperatures. It is frequently used for industrial applications such as heat exchangers and is being considered to cool advanced central processing units (CPU) which produce heat fluxes on the order of 1 MW/m2 and are becoming increasingly less efficient to cool via forced conduction of air. The issue with implementing nucleate boiling as a cooling mechanism lies in the difficulty of quantifying the numerous and complex mechanisms which control the process. A comprehensive nucleate boiling model has yet to be formulated and will be required in …

Molecular Dynamics Simulations Of Pure Polytetrafluoroethylene Near Glassy Transition Temperature For Different Molecular Weights, Rawan Al-Nsour

Theses and Dissertations

Fluoropolymers are employed in countless end-user applications across several industries. One such fluoropolymer is polytetrafluoroethylene. This research is concerned with studying and understanding the thermal behavior of polytetrafluoroethylene. Such understanding is critical to predict its behavior in diverse service environments as the polymer ages and for allowing bottom up design of improved polymers for specific applications.

While a plethora of experiments have investigated the thermal properties of polytetrafluoroethylene, examining these properties using molecular dynamics simulations remains in its infancy. In particular, the current body of molecular dynamics research on polytetrafluoroethylene has primarily focused on studying polytetrafluoroethylene phases, its physical nature, …

Standoff Methods For The Detection Of Threat Agents: A Review Of Several Promising Laser-Based Techniques, J. Bruce Johnson, Susan D. Allen, Jonathan Merten, Lewis Johnson, Daniel Pinkham, Scott W. Reeve

Publications

Detection of explosives, explosive precursors, or other threat agents presents a number of technological challenges for optical sensing methods. Certainly detecting trace levels of threat agents against a complex background is chief among these challenges; however, the related issues of multiple target distances (from standoff to proximity) and sampling time scales (from passive mines to rapid rate of march convoy protection) for different applications make it unlikely that a single technique will be ideal for all sensing situations. A number of methods for spanning the range of optical sensor technologies exist which, when integrated, could produce a fused sensor system …

Electrospinning Applications Air Filtration And Superhydrophobic Materials, Negar Ghochaghi, Adetoun Taiwo

Graduate Research Posters

Electrospinning is a widely applicable technique that generates non-woven fibers in the micro and nano range. In this project two of its applications are highlighted namely filtration media and enhancement of wettability. The first project demonstrates that electrospinning can be used to produce new fiber filtration media with controlled microstructure. The bimodal and unimodal orthogonal and random filters were made and characterized against their filtration efficiency and pressure drop. Figure of Merit (FOM) was also calculated and discussed. It is shown that the FOM increases when the electrospun fibers are arranged into alternating layers of aligned course and fine fibers. …

System-Level Simulation Of A Solar Power Tower Plant With Thermocline Thermal Energy Storage, Scott M. Flueckiger, Brian D. Iverson, Suresh V. Garimella, James E. Pacheco

Faculty Publications

A thermocline tank is a low-cost thermal energy storage subsystem for concentrating solar power plants that typically utilizes molten salt and quartzite rock as storage media. Longterm thermal stability of the storage concept remains a design concern. A new model is developed to provide comprehensive simulation of thermocline tank operation at low computational cost, addressing deficiencies with previous models in the literature. The proposed model is then incorporated into a system-level model of a 100 MWe power tower plant to investigate storage performance during long-term operation. Solar irradiance data, taken from measurements for the year 1977 near Barstow, CA, are …

Modelling Of Biomass Gasification Integrated With A Solid Oxide Fuel Cell System, Wayne Doherty

Doctoral

Biomass is of major interest as a renewable energy source in the context of climate change and energy security. Traditional biomass conversion technologies achieve low electrical efficiencies. Biomass gasification (BG) coupled with fuel cells offer higher efficiencies. Gasification is a process in which a carbonaceous fuel is converted to a combustible gas. It occurs when a controlled amount of oxidant is reacted at high temperatures with available carbon in a fuel within a gasifier. Two technologies (circulating fluidised bed air gasification and dual fluidised bed steam gasification) were modelled. Solid oxide fuel cells (SOFCs) are well suited to integration with …

Combustion Visualization And Particulate Matter Emission Of A Gdi Engine By Using Gasoline And E85, Po-I Lee

Wayne State University Dissertations

In order to increase engine efficiency as well as to reduce emission, optimizing combustion is always the challenge in research and product development. Gasoline direct injection (GDI) engines have been popularized due to its higher power density, fuel efficiency, and the possibility for advanced engine technologies over conventional port-fuel-injection (PFI) gasoline engines. However, many issues are heavily investigated, such as air-fuel mixing preparation, fuel wall-wetting, higher HC and PM emissions, catalytic convertor efficiency, knocking, and pre-ignition. Besides, advanced technologies represent higher production cost.

Because of the limited resource of petroleum-based fuels, ethanol is deemed as the alternative fuel for gasoline …

Effect Of Cetane Number And Volatility On Autoignition And Combustion Of Alternative Fuels And Their Surrogates, Ziliang Zheng

Wayne State University Dissertations

Diesel engine has become a popular choice for trucks, trains, boats, and most other heavy-duty applications. The inherent benefits of diesel engine are high thermal efficiency and specific power output, but there is a concern about high levels of engine-out NOx and particulate matter emissions, which is a major contributor in environment pollution. Moreover, concern about the crisis of crude oil reserves, increasing gas price, trade deficit, and homeland security enhances the interests in alternative fuels.

Unlike conventional diesel fuel, alternative fuels have wide range of properties, such as volatility, cetane number, density, viscosity and lower heating value, which influence …

Analysis Of A Dual Scissored-Pair,Variable-Speed, Control Moment Gyroscope Driven Spherical Robot, Richard Chase

Wayne State University Dissertations

The objective of this research is to compare barycenter offset based designs of spherical robots to control moment gyroscope (CMG) based designs in order to determine which approach is most effective. The first objective was to develop a list of current state of the art designs in order to gain an overall understanding of what the obstacles in this area of research were. The investigation showed that barycenter offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design …

Applying Spiking Neural Network Simulation To Neuromodulatory Autonomous Robot Control, Cameron Muhammad

Phi Kappa Phi Research Symposium (Archived)

In this paper, simulation of the brain based on an artificial spiking neuron model is used to create a self-learning algorithm. The spiking neuron simulation is used to demonstrate a neuromodulation program in which the reward seeking properties of dopamine, the risk-adverse effects of serotonin, and the attention-focusing effects of the cholinergic and noradrenergic systems are applied to a mobile robotic platform as it moves autonomously throughout an environment. External stimuli is recorded by the program as spiking “events” that result in corresponding amounts of dopamine and serotonin influenced spiking patterns. These spiking patterns affect how the robot adapts to …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

College of Graduate Studies: Theses & Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …

Cryogenic Testing Of High-Velocity Spoke Cavities, C. S. Hopper, Hyekyoung Park, J. R. Delayen

Physics Faculty Publications

Spoke-loaded cavities are being investigated for the high-velocity regime. The relative compactness at low-frequency makes them attractive for applications requiring, or benefiting from, 4 K operation. Additionally, the large velocity acceptance makes them good candidates for the acceleration of high-velocity protons and ions. Here we present the results of cryogenic testing of a 325 MHz, β0 = 0.82 single-spoke cavity and a 500 MHz, β0 = 1 double-spoke cavity.