Mechanical Engineering Commons^™

Capturing Sclera Anisotropy Using Direct Collagen Fiber Models: Linking Microstructure To Macroscopic Mechanical Properties, Fengting Ji, Xuehuan He, Frederick Sebastian, Mohammad R. Islam, Hannah Schilpp, Bingrui Wang, Yi Hua, Rouzbeh Amini, Ian A. Sigal

Mechanical Engineering Faculty Publications

Collagen fibers are essential to the mechanical behavior of soft tissues, including sclera. Conventional models often represent these fibers statistically, potentially missing crucial aspects of their role in tissue behavior. In this study, we expand on a direct fiber modeling approach that we recently presented based on explicitly representing the sclera long, interwoven fiber bundles. Specifically, our goal was to capture specimen-specific 3D fiber architecture and anisotropic mechanics of four ovine sclera samples (superior from Eye-1, temporal and superior from Eye-2, and temporal from Eye-3), each tested under five conditions: equi-biaxial (1:1) and four non-equi-biaxial (1:0.75, 0.75:1, 1:0.5, and 0.5:1). …

Rheology-Guided Spinnability In Emulsion Forcespinning Of Water-In-Oil Nanofibers: Influence Of Surfactants And Internal Phase Concentration, Saptasree Bose, Alexandra Salinas, Evelyn Torres, Jose Ramirez, Elizabeth Gamez, Michelle A. Calabrese, Karen Lozano, Victoria Padilla

Mechanical Engineering Faculty Publications

This study explores the emulsion Forcespinning (FS) approach for fabricating nanofibers with a hydrophilic phase encapsulated within a hydrophobic polymer matrix. Key factors influencing fiber production and morphology, including the concentration of the internal water phase and the presence of ionic and nonionic surfactants, were systematically investigated. Additionally, the centrifugal spinnability of the emulsions was assessed using environmentally controlled dripping-onto-substrate (DoS) rheometry, correlating the observed extensional flow behavior and emulsion extensibility with fiber spinnability. The nanofibers were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. These findings offer critical …

Model-Based Investigation Of The Influence Of Environmental Conditions On The Energy Supply Of Multirotor Uavs, Morten Roßberg, Hanna Dibbern, Claudia Werner

Journal of Aviation Technology and Engineering

Flight time of unmanned aerial vehicles (UAVs) is limited by available energy, which is affected by the mission profile and external factors, such as environmental conditions. Two main environmental conditions that need to be considered are the impact of wind and ambient temperature on the UAV and its energy supply. The purpose of this study is to examine the effects of wind and ambient temperature to conduct a preliminary evaluation of flight performance and flight limitations. For this reason, three locations in the United States—New York City, Miami, and Fairbanks—are selected and the impact of the considered environmental conditions of …

Numerical Solution Of A Coupled Nonlinear Dynamic Problem Of Thermoviscoelasticity, Abdali Abdukarimov, Ibodat Turabekovna Khaldybaeva, Askarova Shamshetdinovna Ayjamal

Technical science and innovation

This paper presents a numerical solution of a coupled nonlinear dynamic problem of thermoviscoelasticity. A Duffing-type oscillator with temperature-dependent properties is used to model nonlinear hereditary deformable systems. After specifying the temperature dependences of the elastic modulus 𝐸 and viscosity parameter 𝜂 and introducing dimensionless variables, the problem is reduced to a system of nonlinear integro-differential equations. A numerical procedure for solving this system is developed, and representative examples are computed. The results are presented in graphical form for various values of the governing parameters.

Numerical Investigation Of Heat Transfer And Aero-Acoustic Response In Deep Cavity Flows Using Urans Simulations, Abdul Hamid Jabado, Ali Hammoud, Bilal El Zohbi, Bilal Taher, Hassan Assoum

BAU Journal - Science and Technology

This paper presents a numerical study to investigate a deep cavity flow, in order to better understand the underlying mechanisms involved in it, such as flow dynamics, heat transfer, and aeroacoustics. A 2-D Unsteady Reynolds Averaged Navier Stokes model (URANS) was implemented using an SST k-ω turbulence closure simulated over a rectangular deep cavity. Previous experimental results were used to validate the numerical results, to confirm the accuracy of the flow field patterns reproduced. Both controlled and uncontrolled cases were analyzed. Heat transfer was also investigated on both configurations, showing the effect of cavity geometry and inlet conditions on heat …

Electromagnetic Formation Flying Using Alternating Magnetic Field Forces And Control Barrier Functions For State And Input Constraints, Sumit Suryakant Kamat, Thomas Michael Seigler, Jesse B. Hoagg

Mechanical Engineering Faculty Publications

This article presents a feedback control algorithm for electromagnetic formation flying with constraints on the satellites’ states and control inputs. The algorithm combines several key techniques. First, we use alternating magnetic field forces to decouple the electromagnetic forces between each pair of satellites in the formation. Each satellite’s electromagnetic actuation system is driven by a sum of amplitude-modulated sinusoids, where amplitudes are controlled in order to prescribe the time-averaged force between each pair of satellites. Next, the desired time-averaged force is computed from an optimal control that satisfies state constraints (i.e., no collisions and an upper limit on intersatellite speeds) …

Numerical Simulation And Analysis Of Lid Driven Cavity Flow And Flow Around A Cylinder, Liberty Ammamoo Mr, Mohammad Uddin Dr

ASPIRE 2026

This paper explores a computational investigation of two classical fluid dynamics problems-lid driven cavity flow and flow around a cylinder- simulated at varying Reynolds numbers using Ansys Fluent (AF) and OpenFOAM (OF).The primary goal is to reproduce and compare the physical flow behavior observed in both solvers under matched boundary conditions, mesh configurations, and fluid properties, rather than to compare solver performance. Simulations for a square cavity case at Reynolds number of 10,100,10000, and for the flow around a cylinder case at Reynolds number of 180 were produced. The results capture key flow features including primary vortex formation, vortex shifting …

Computational Modeling And Machine Learning For The Design Of Polymer-Based Protective Systems Under Dynamic Loading, Jonathan Tate Villada

Open Access Dissertations

Computational modeling and machine learning offer powerful pathways for designing polymer-based protective systems subjected to dynamic loading, particularly for mitigating the early shock-dominated response generated by near-field underwater explosions (UNDEX). As naval, offshore, and submerged infrastructure systems continue to grow in strategic importance, there is an increasing need for lightweight, damage-tolerant protective solutions capable of reducing transmitted pressure, deformation, and energy transfer under extreme impulsive environments. Since large-scale experimental testing under such conditions are costly and limited, validated numerical frameworks provide an efficient means to evaluate polymeric coatings, architected metastructures, and data-driven predictive tools across broad design spaces. The first …

Captive Model Test For Hydrodynamic Derivatives Of Ship Maneuvering In Regular Head Waves, Pin-Yuan Huang, Zih-Yao Lin, Tsung-Yueh Lin, Fu-En Lee, Yan-Wei Lai

Journal of Marine Science and Technology–Taiwan

The motion of ship in wave can be discussed in seakeeping and maneuvering. In model tests, the former is found by the motion response of waves while the latter requires captive model test to acquire hydrodynamic derivatives. The hydrodynamic derivatives in waves are discovered to be different from those in calm water. To understand better the behavior of maneuverability in waves, maneuvering tests in a wide range of waves are performed in this study. This study presents an experimental investigation into the maneuvering behavior of a container ship in regular waves, covering a wide range of wavelengths from half to …

Measuring The Impact Of 3d Printers On The Health Of Youth, Alexis Kostin, Olla Obeid, Oz Trost

Wetterhahn Science Symposium Posters

3D printers are used more widely than ever before; they can be found in factories, hospitals, and even schools. However, the health effects of the VOCs and UFPs that these machines emit have yet to be fully understood. In collaboration with the University of Nevada, Las Vegas, this study utilizes an Air Gradient One sensor at the Diamond Lab to monitor VOC and UFP emissions before, during, and after 3D printing sessions. By comparing these levels to EPA and CDC safety standards, we aim to quantify the respiratory risks posed to youth.

Numerical And Machine Learning Based Recreation Of Damage Morphologies Of Barely Visible Impact Damage, Oscar A. Valdez

Mechanical and Aerospace Engineering Dissertations

Composite laminates are highly sought after in the aerospace industry as they provide strength without dramatically increasing the weight of manufactured structures. However, composite laminates are susceptible to barely visible impact damage caused by routine activities. This type of damage can easily go unnoticed while significantly reducing the load-carrying capability of the laminate. Current non-destructive evaluation techniques, such as ultrasonic scanning, can reveal the damage footprint but provide no insight into delamination through-the-thickness due to the shadowing effect. Micro-computed tomography offers ply-by-ply damage resolution but is unsuitable for field inspections and is constrained by specimen size. This study aims to …

Set-Theoretic Reachability-Informed Model Predictive Control For Mechanical And Aerospace Systems, Jinaykumar Nitinkumar Patel

Mechanical and Aerospace Engineering Dissertations

Modern mechanical and aerospace systems increasingly operate autonomously in environments characterized by nonlinear dynamics, uncertainty, and safety constraints. In these settings, estimation and control methods based on nominal models and single-point trajectory predictions are usually insufficient to ensure safe and reliable operation. This dissertation uses a set-theoretic perspective, in which the system state, uncertainty, and admissible behavior are described by sets instead of point estimates. The key question is not only what the state is, but what set of states remains consistent with the dynamics, disturbances, control limits, and available measurements. This provides bounded descriptions of uncertainty and supports control …

Experimental Thermal Characterization And Comparison Of Direct Liquid Cooling And Air Cooling For A High-Density Gpu Server Thermal Test Vehicle, Oluwagbolahan Esan

Mechanical and Aerospace Engineering Theses

As the power density of artificial intelligence (AI) and high-performance computing (HPC) servers escalates, air cooling is approaching fundamental scaling limits set by air's low convective heat transfer coefficient and rising parasitic fan power. This thesis presents an experimental comparison of direct-to-chip liquid cooling and air cooling for a high-density GPU server, using a Thermal Test Vehicle (TTV) that emulates the device layout and power-density regime of an 8-GPU SXM5-class baseboard (eight emulated GPU blocks and four NVLink Switch modules). The liquid configuration was tested at 8.8 kW (8.0 kW GPU, 800 W switch) across three Coolant Distribution Unit (CDU) …

Computational Modeling Of Biophysical Transport: Respiratory Drug Delivery And Tissue-Level Physics, Md Tariqul Hossain

Electronic Theses and Dissertations

The nasopharynx, the upper part of the pharynx located at the back of the nose serves as a critical hotspot for initial respiratory infections via inhaled transmission, largely due to the presence of specific surface receptors that pathogens can exploit for cell invasion, combined with a relatively sparse local mucociliary substrate. To enhance the therapeutic efficacy against certain pathogens, such as the SARS and Influenza viruses, it is therefore essential to improve the targeted delivery of drugs to the nasopharynx. This study explores the use of intranasal sprays as a method for drug administration and models the transport of sprayed …

Numerical Investigation Of Injector Location And Equivalence Ratio In A Flame‐Holder Cavity Scramjet, Matthew Sorenson

Electronic Theses and Dissertations

This thesis presents a CFD-based parametric study of injector location and fuel rate in an ethylene-fueled flame-holder cavity scramjet using STAR-CCM+. Simulations are performed for three injector locations (x/D = 18, 36, and 54) and nine equivalence ratios spanning from ϕ = 0.2 to 1.0 in 0.1 increments. The study aims to determine how injector placement and fueling level alter scramjet performance across a broad operating sweep. The results show a clear regime change between ϕ = 0.2 and ϕ ≥ 0.3. At ϕ = 0.2, combustor behavior is weakly sensitive to injector location compared to the higher-fueling cases. For …

Cross-Linking Peg Microgels With Mesoporous Organosilica Nanoparticles To Engineer Microporous Annealed Particle Scaffold Properties, Jonathan M. Zuidema, Alessandro Ajo, Marco Carofiglio, Luisa De Cola

Mechanical Engineering Faculty Publications

Microporous annealed particle (MAP) scaffolds composed of cross-linked microgels are emerging as important biomaterials due to their modular design, high porosity, and large surface area, which allow for highly tailored properties, cellular infiltration, nutrient and waste exchange, and improved drug release characteristics. To further expand on these technologies and enhance their modular design, thiolated mesoporous organosilica nanoparticles (ssMSN-SH), which degrade in response to glutathione, were first cross-linked inside of 4-arm poly(ethylene glycol) maleimide microgels. The microgel size, rheological properties, and payload release characteristics were determined. Hierarchical MAP scaffolds were then created by cross-linking 4-arm poly(ethylene glycol) maleimide microgels with ssMSN-SH. …

Rope Cutting Task Module, Rebecca Usher

Engineering Theses

This project focuses on the design and evaluation of a rope-cutting module for use with robotic platforms developed by New England Robotics Validation and Experimentation Center (NERVE) and the University of Massachusetts Lowell. The system is designed to cut nylon rope using a specialized robotic cutting arm that can be attached to the robot.

The system consists of a module task box that has two pegs that hold two arms to each one. One arm where the spring- mechanism inside of the task module and the second arm the one on top of the box hold the string in place …

Improving Ground Penetrating Radar Calibration For Chloride Assessment In Reinforced Concrete Bridge Decks, Camila Silva Wendland

Engineering Theses

This study investigates how ground penetrating radar (GPR) can be used to estimate chloride content in reinforced concrete bridge decks. Chloride buildup at the rebar level can lead to corrosion and structural damage, but current testing methods are destructive and limited to small sample areas. GPR offers a non-destructive alternative, but interpreting reflection amplitudes is challenging because they are affected by multiple factors, including moisture content and rebar depth. To address this, a simulation-based calibration method was developed. Finite-difference time-domain simulations were used to study how chloride, moisture, and rebar depth influence GPR reflection amplitudes. A depth correction method was …

A Comprehensive Statistical And Regional Analysis Of Lng-Powered Marine Vessels On Ghg Mitigation Strategies Considering Existing Bunkering Stations And Gwp Values, Canberk Hazar, Onur Yuksel, Murat Bayraktar

Journal of Marine Science and Technology–Taiwan

This study aims to quantify and analyse emissions from marine vessels that can operate on liquefied natural gas (LNG) but continue to use conventional fuels, largely due to the limited availability of LNG bunkering stations (BSs) over long distances. Four regions have been identified as having high concentrations of LNG-fueled vessels but limited access to operational BSs: the West Coast of the United States of America (USA), South Africa–Good Hope–Madagascar, Northwest Africa, and Brazil. This selection is based on the geographical distribution of these ships and the existing infrastructure. Hourly greenhouse gas (GHG) emissions have been calculated by considering the …

Characterization Of Tomographic Piv System For Single-Phase Immersion Cooling Applications, Joel Joshua Oommen

Mechanical and Aerospace Engineering Theses

As the rapid expansion of Artificial Intelligence (AI) infrastructure and High-Performance Computing (HPC) pushes power requirements to new heights, traditional air-cooling methods have become inadequate for modern server demands. Consequently, single-phase immersion cooling (SPIC) has emerged as one of the effective and sustainable alternatives, utilizing dielectric fluids to remove heat through direct contact with electronic components. Despite numerous thermal and reliability studies, the complex three-dimensional movement of buoyant thermal plumes around intricate component shapes are not yet fully understood in confined spaces.

This thesis provides a detailed characterization of Tomo-PIV and a component level experimental study of flow patterns in …