Mechanical Engineering Commons^™

Solar Solution For Closed Ccr Units And Adjacent Land, Chris Fairey

World of Coal Ash Proceedings

Solar Solution for Closed CCR Units and Adjacent Land Chris Fairey1, Kenny Hughes1 1Watershed Geo, 1125 Sanctuary Pkwy, Suite 180, Alpharetta, GA 30009 KEYWORDS: Solar, Racking, Brownfield, Greenfield, Slopes, PowerCap® ABSTRACT With the reduction in coal fired power generation, there is a consistent trend in the industry to supplement generation with solar power. The property located within and surrounding these decommissioned power plants offers a significant opportunity to create a renewable solar power asset. The PowerCap® Nail to Rail System, developed by Watershed Geo, is an advanced solar racking solution designed for sites that do not require environmental closure such …

Investigation Of A Historical Coal Combustion Residuals Management Unit (Ccrmu), Todd Stong, Shane Stockdill, Erin Hunter

World of Coal Ash Proceedings

Rainbow Energy Center’s (REC’s) Coal Creek Station has managed coal combustion residuals (CCR) in various engineered impoundments and landfills since plant operation began in 1978. Since then, waste containment methods have evolved resulting in significant changes to their CCR management practice. In the late 1980s and early 1990s REC closed several existing CCR units with natural soil liners and constructed several new CCR units with composite liner systems. One of the closed units was an area now referred to as North Section 16, an impoundment that received CCR including bottom ash, fly ash, and flue gas desulfurization material. North Section …

Transportation Logistics Panel, John Ward, Andrew Vollmer, Tracy Zea, Marci Jenks

World of Coal Ash Proceedings

As the industry shifts from freshly generated ash to harvested materials and advanced utilization, logistics is becoming one of the primary drivers of project success or failure. This moderated panel will explore how sourcing, transportation, and storage realities are changing — and what project teams most often underestimate when working with harvested coal ash. Panelists will discuss what breaks, what becomes more complex, and how logistics considerations are reshaping planning and development.

Abundances Of Elements In Global Coals, Shifeng Dai

World of Coal Ash Proceedings

The abundance of elements in coal is important not only because it provides a solid scientific and practical foundation for various geochemical comparisons, but also because it helps address broader questions in Earth Sciences. In this study, data on major and trace elements in global coals comprising hundreds of thousands of coal samples were compiled from peer-reviewed journal articles, books, various databases, dissertations, and technical reports. These data formed the basis for estimating element abundances in global coals presented in this study. All collected data were rigorously screened for reliability, and any records with questionable quality were excluded from the …

Optimization Of Remedial Strategies For Ccr Site Corrective Action Through Advanced Geochemical Modeling, Cole Mayer, Pj Nolan

World of Coal Ash Proceedings

The power industry is actively designing and implementing corrective measures for Coal Combustion Residuals (CCR). In many cases, these measures include active remedies such as pump and treat, in-situ injection, or reactive barriers, all of which demand a thorough understanding of the underlying geochemical system. Depending on the geochemical characteristics of an aquifer, different chemical reagents can achieve varying degrees of success or even be detrimental to the remediation of the site. Advanced geochemical modeling is an invaluable tool for developing a remedy that is optimized to the site-specific geological, hydrological, and geochemical environment. In the case study presented here, …

Application Of Stable Isotopes In An Alternative Source Demonstration, Alison O'Connor

World of Coal Ash Proceedings

Stable isotope analysis is commonly used in age dating, provenance studies and to differentiate between sources of groundwater. Multiple studies have shown that strontium and boron isotopic ratios can be successfully used in identifying CCR impacts to groundwater. This talk presents an applied case study using boron and strontium isotopes in conjunction with additional geochemical approaches in an alternative source demonstration. Boron and strontium isotopes were measured in both groundwater and CCR leachate over sampling events from 2019 to 2025. The data revealed that strontium and boron isotopic signatures in groundwater near the CCR unit differed significantly from both site-specific …

Alternative Cover Permitting And The Ccr Rule, Evan Andrews, Victor Damasceno

World of Coal Ash Proceedings

Federal rules (40 CFR Parts 9, 257 and 261) that regulate coal combustion residuals (CCR) created a significant demand associated with closure of coal ash management and storage facilities using liner systems. Timelines associated with these facility closures combined with substantial project scale and potential for future mining /reuse has driven the need for closure systems that perform beyond the prescriptive soil / geomembrane caps outlined in the federal regulations. As outlined in section 257.102 (d)(3)(i) of the CCR Rule, the standard cover system must include an infiltration layer of at least 18 inches of earthen material and an erosion …

Ccr Landfill Closure Challenges, Solutions And Innovation, Jay Mokotoff, Drew Browning, Steve Applegate

World of Coal Ash Proceedings

CCR landfills can present unique design and construction challenges for the industry when closing these units at the end of their life. In comparison to CCR surface impoundments, CCR landfills typically have greater flexibility under the CCR Rule for operations and beneficial use purposes and may not have defined closure dates which results in some of these closures extending further into the future. However, as coal burning plants continue to shudder, the closure of these landfills is rapidly approaching. This presentation will focus on the challenging site conditions, site specific considerations and potential solutions when designing and constructing the landfill …

Distinguishing Ccp From Nuclear Impacts In Groundwater, Lea Millet

World of Coal Ash Proceedings

As the energy transition from fossil fuels to other generation technologies continues, many companies worldwide are evaluating the feasibility of constructing nuclear power plants at sites previously used for coal-powered generation. Thermal power plant sites offer advantages for siting nuclear generation such as proximity to cooling water and grid connections; however existing impacts to groundwater from coal combustion product (CCP) management units may confound monitoring programs designed to detect impacts from nuclear operations. For example, boron and lithium may be present in waters associated with CCP management and nuclear power plant operations, and potassium that often has concentrations above background …

Engineering Granulometry To Optimize Performance Of Reclaimed Ash, Russell Hill

World of Coal Ash Proceedings

As utility production of fresh fly ash declines, the concrete industry is turning to reclaimed and beneficiated materials to maintain reliable SCM supply. This transition creates an opportunity not only to secure volumes but to engineer improved performance. The ReCinis™ beneficiation process enables this by providing controls that tune particle-size distribution (PSD), sphericity, packing behavior, surface area, and surface activation. Processing trials show that blends combining fine ground fractions with spherical, broad-graded hydrocyclone overflow (OF) materials can balance high reactivity with favorable rheology. Mechanochemical activation during grinding appears to increase reactivity beyond what surface-area metrics alone predict, likely through removal …

Sustainability And Waste Diversion At Tva Shawnee "Project Phoenix", Bryan Jacob, Shane Harris

World of Coal Ash Proceedings

An engineered turf closure system can serve as an ideal foundation for a solar energy system to be installed atop coal combustion residual (CCR) impoundments. This approach not only enables productive power generation during the post-closure period, it also preserves opportunities for recovery and beneficial use of CCR material in the future. “Project Phoenix” at TVA’s Shawnee Fossil Plant offers an illustrative example. This paper will cover the sustainability benefits of the companion ClosureTurf® and PowerCap® systems installed at that site as well as waste diversion activities undertaken during construction to recycle as much as practical and minimize waste destined …

Expert Perspectives On The U.S. Coal Combustion Products Market – Now, Then, And The Future, Mark Rokoff, David Cox, Walter Lemaire, John Ward

World of Coal Ash Proceedings

This panel discussion will explore the continued evolution of the U.S. coal combustion products market, with a focus on the impacts of dynamic regulatory and market forces. Invited expert panelists will share perspectives on developments over the past several years (building on discussions from WOCA 2022 and WOCA 2024), current conditions, and expected future trends—particularly those likely to shape the market between 2026 and 2030. The discussion will address the interrelated markets for engineering, construction, and beneficiation of ash from both operating and inactive plants. Panelists will offer perspectives relevant to the full coal ash industry, from owner/operator organizations to …

Demystifying Large Language Models: How Ai Is Transforming Data, Compliance, And Decision-Making In Coal Ash And Environmental Management, Scott Pfeiffer

World of Coal Ash Proceedings

The environmental and coal combustion residuals (CCR) industries generate vast amounts of information—from groundwater monitoring reports and RCRA documentation to closure plans and analytical data. Managing, interpreting, and communicating this information is a growing challenge for utilities, regulators, and consultants alike. Large Language Models (LLMs), such as OpenAI’s GPT architecture, represent a breakthrough in how organizations can interact with their technical data. These models use deep neural networks trained on billions of words to understand, summarize, and generate language with human-like accuracy. When securely adapted for enterprise use, LLMs can automate routine reporting, extract data from technical documents, generate regulatory …

Subsurface Delineation Of Coal Combustion Residuals Using Multiple Geophysical Methods, Eric Hageman, Adam Rak, Thomas Jordan, Kate Mckinley

World of Coal Ash Proceedings

Geophysical techniques provide alternative methods of Coal Combustion Residual (CCR) delineation and characterization to supplement more invasive boring programs used for beneficial reuse planning. A demonstration project was designed to characterize the electromagnetic and seismic stratigraphy of CCR material and test the effectiveness of three geophysical techniques: Electrical Resistivity Imaging (ERI), Transient Electromagnetic (TEM) induction, and Multi-channel Analysis of Surface Wave (MASW). The demonstration project was completed at a dry-stack CCR unit containing a variety of CCR ash, gypsum, and thin layers of drainage aggregate (limestone). During a single-day deployment, several geophysical survey tests were conducted in specific areas of …

Sit-To-Stand: Smart Physical Therapy Device Design Project, Mollie Petersen, Evie Collier, Gracie Kniss, Lucas Sokolik, Jacob Zitek

Honors Program: Senior Projects (Public)

Mechanical engineering students in their last year are provided with the opportunity to form a small group and design a product. The specific project covered in this report is the creation of a smart attachment to a physical therapy device. A sit-to-stand piece of equipment is used to help patients recover or build the strength to move from a sitting to standing position after an injury or illness. Currently, there is not a way for physical therapists to collect numerical data while a patient is using the equipment. Much of their care plans are built off of personal perception and …

Analysis Of Approximations In Flash Thermal Diffusivity Measurements Using High‑Fidelity Simulations, Tage T. Burnett, Jakob G. Bates, Matthew R. Jones, Christopher R. Dillon, John Tencer

Faculty Publications

Thermal diffusivity is an important material property for understanding and characterizing transient behavior in many heat transfer applications. This study investigates the accuracy and approximations of inverse mathematical models for measuring thermal diffusivity of materials via the widely used Flash Method. High-fidelity simulations of the Flash Method in copper, silicon carbide, silicon, and glass were performed as numerical experiments and included physics such as in-depth absorption, radial conduction, and surface convection. Data from those numerical experiments were used to estimate material thermal diffusivity using seven traditional and new inverse models. Parker’s original model had relative errors 𝜖< 5% when the approximations it makes were enforced in numerical experiments. Newer models performed well even when experimental restrictions were relaxed. Models that include radial heat conduction were capable of accurately measuring thermal diffusivity (𝜖< 1%) when a Gaussian energy source was used. Models with radial conduction and in-depth material absorption of the laser source could calculate thermal diffusivity for semi-transparent materials such as silicon (𝜖< 1%) and even transparent materials like glass (𝜖< 10%). Convective losses from the material’s front surface had a negligible impact on measurements except for very low thermal diffusivity materials. Using temperatures from many locations of the test material’s surface increased resilience to noise, reducing the distribution of thermal diffusivity measurements by more than an order of magnitude. The models developed in this study could enable a more relaxed Flash Method experimental setup that maintains thermal diffusivity accuracy and extend the utility of the Flash Method to semitransparent materials.

Aerodynamic Performance Of Grid Fins As High Lift Devices, Luke Jeffrey Krick

Senior Honors Theses

Flaps are used in almost all aircraft to increase the amount of lift the wings can produce at low speeds. However, the flaps also increase the amount of drag experienced by the aircraft. The drag induced by the flaps causes energy loss and is unfavorable for aircraft effectiveness. In recent years, grid fins have become a popular choice for aircraft and armaments to control their orientation. First developed for launch escape towers, grid fins are made up of lines that cut the fin into many quadrants, leaving the fin with multiple rectangular shaped open areas. The aim of this study …

Engineering Design And Analysis Using Creo® Cad, Cae, And Manufacturing Applications, Swapnil Moon

Open and Affordable Textbooks

This textbook presents a structured approach to computer-aided design using Creo, integrating CAD, CAE, and CAM workflows within a unified engineering framework. The material emphasizes parametric modeling, design intent, and feature-based modeling as foundations for creating robust and adaptable engineering models. Through progressively structured tutorials, students develop skills in part modeling, assemblies, engineering drawings, mechanism design, simulation, and manufacturing. The text incorporates real-world engineering components and workflows, including structural and thermal analysis, motion simulation, and toolpath generation, reflecting modern engineering practice. Designed for upper-division undergraduate and graduate students, this open educational resource supports hands-on learning and prepares students for industry-relevant …

Introduction To Computer-Aided Design Using Solidworks® : A Structured Approach To Parametric Modeling And Design Intent, Swapnil Moon

Open and Affordable Textbooks

This textbook introduces computer-aided design (CAD) using SOLIDWORKS® through a structured, design-centered approach that emphasizes parametric modeling and engineering reasoning. Rather than focusing solely on software commands, the material develops foundational skills in design intent, constraint-based modeling, and feature relationships to create robust, adaptable models.

The content is organized progressively, beginning with basic sketching and feature creation and advancing to complex part modeling, assemblies, motion studies, and engineering drawings. Each chapter builds upon prior concepts, reinforcing systematic modeling practices and promoting the development of system-level thinking required in real-world engineering design workflows.

Designed for undergraduate students with little or no …

Aquaculture Ecosystem Modeling Aeration Efficiency Optimization Using Cfd, Gabriela Reyes Gomez

Electronic Theses and Dissertations

The Harbor Branch Oceanographic Institute (HBOI) is developing the Intelligent and Resource Efficient Pond Aquaculture (IREPA) project, which aims to improve aquaculture management through the integration of predictive models and automated technologies. This approach seeks to transition traditional practices toward data-driven systems capable of supporting informed decision-making for aeration management.

This study investigates the effectiveness of different aerator configurations on hydrodynamic circulation and dissolved oxygen (DO) distribution in aquaculture ponds using computational fluid dynamics (CFD). A model was developed in ANSYS Fluent, where the aerator was represented using a power-based formulation and implemented as a moving wall boundary condition. Dissolved …