Mechanical Engineering Commons^™

Design Approach To Fire Life Safety In Tunnels Through The Use Of Subway Environment Simulation Software, Bradley L. Zundel

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 130-137

Method To Accurately Estimate Tesla Turbine Stall Torque For Dynamometer Or Generator Load Selection, Tamir A. Emran, Ryan C. Alexander, Chris T. Stallings, Mark A. Demay, Matthew J. Traum

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 158-164

A Comparative Study Of Segmented Tungsten Rod Penetration Into A Thick Steel Target Plate, Michael B. Presnell, Arunachalam M. Rajendran

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 153-157

Trajectory Planning Of 3r Robotic Arm Using Genetic Algorithm (Ga) And Artificial Bee Colony (Abc) Optimization Methods, Poonam V. Savsani, Hemant Nagarsheth

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 138-145

Efficient Continuous-Time Optimization, Dale B. Mcdonald

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 165-172

Preliminary Investigation Of A Chemical Heat Engine For Solar Energy Applications, Matthew Turk, Ryan Melsert, Sheldon Jeter, Hany Al Ansary

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 198-202

A Novel Strategy For Nonlinear Closure In Proper Orthogonal Decomposition Reduced-Order Models, Imran Akhtar, Zhu Wang, Jeff Borggaard, Traian Iliescu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 189-197

An Experimental Study For Flexural Properties Of 22- And 32-Ply Honeycomb Composite Panels Im7/8552, Michael Hempowicz, Gail D. Jefferson, Kuang-Ting Hsiao, N Gaston

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 178-180

Doe Investigation Into The Diminishing Effect Of Applied Mean Stress And Bending Stress On The High Cycle Fatigue Behavior Of A Threaded Fastener, Brian S. Munn

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 208-214

Computer-Aided Product And Process Development Of Lace Braided Composites, David J. Branscomb, David G. Beale, Royall M. Broughton Jr

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 215-220

Damage Evaluation Of Braided Kevlar®/Carbon/Epoxy Composite Beams In Three Point Bending With Infrared Thermography, David J. Branscomb, Idris Cerkez

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 221-225

A New Single Transient Technique To Measure Film Cooling Performance: Gas Turbine Application, Mohamed G. Ghorab

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 226-233

Ab-10-018: The Effects Of Noise From Building Mechanical Systems With Tonal Components On Human Performance And Perception (1322-Rp), Erica E. Ryherd, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study investigated the effects of noise from building mechanical systems with tonal components on human task performance and perception. Six different noise conditions based on in-situ measurements were reproduced in an office-like setting; all were set to approximately the same sound level (47 dBA) but could have one particular tonal frequency (120 Hz, 235 Hz, or 595 Hz) at one of two tonal prominence ratios (5 or 9). Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately 1 hour to each noise condition. Results show that the noise …

Ab-10-017: Combined Effects Of Noise And Temperature On Human Comfort And Performance (1128-Rp), Dale Tiller, Lily M. Wang, Amy Musser, Matthew Radik

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper summarizes results from an experiment designed to investigate the combined effects of noise and temperature on human thermal comfort and task performance. Thirty subjects (16 females, 14 males) were exposed to all combinations of five thermal conditions (PMV +1 [79.6°F:26.4°C], PMV +0.5 [75.8°F:24.3°C], PMV 0 [72.1°F:22.3°C], PMV -0.5 [68.3°F:20.2°C], and PMV -1 [64.6°F:18.1°C]), three RC noise levels (RC-30, RC-40, and RC-50), and two sound qualities (neutral and rumbly): all sounds mimicked noise from building ventilation systems. After a one-hour adaptation period at each condition, subjects rated their thermal comfort using the ASHRAE Thermal Comfort Scale and the Tenant …

Ab-10-019: Human Performance And Perception-Based Evaluations Of Indoor Noise Criteria For Rating Mechanical System Noise With Time-Varying Fluctuations (1322-Rp), Lily M. Wang, Cathleen C. Novak

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this study was to investigate the effects of noise from building mechanical systems with time-varying fluctuations on human task performance and perception, and to determine how well current indoor noise rating methods account for this performance and perception. Six different noise conditions with varying degrees of time-varying fluctuations, many focused in the low frequency rumble region, were reproduced in an office-like setting. Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately one hour to each noise condition. Results show that the noise conditions with higher sound …

Solid Oxide Fuel Cell Electrode Characterization And Improvement For Fuel Flexibility And Supplemental Power Production, Isaiah D. Kellogg

Doctoral Dissertations

"Solid oxide fuel cells (SOFC) were fabricated and the electrodes tested for their individual catalytic effectiveness in various fuels by exposing each electrode to mixed gas while the opposite electrode was exposed to its respective pure gas. Mixed hydrogen and oxygen gas was successfully utilized as fuel in a single chamber SOFC (SC-SOFC). The conditions at which the porous nickel-yttria-stabilized zirconia (Ni-YSZ) cermet anode performed well did not significantly overlap the conditions at which the La₀.₈Sr₀.₂Fe₀.₈Co₀.₂ oxide (LSCF) cathode performed well, but there was significant catalytic activity at both electrodes which increased the open circuit voltage (OCV) beyond that predicted …

Maskless Additive Manufacturing Of Micro Structures By Laser Sintering Of Nanoparticles, Vivekram Ramanathan

Masters Theses

"The focus of this study was to investigate an alternate microfabrication process of sintering nanoparticles using a patterned laser light to generate two dimensional (2D) and three dimensional (3D) geometries. With trends of producing electronic and medical devices using cheaper and faster technologies, a new procedure was developed to deposit and bond miniature patterns of silver nanoparticles onto silicon substrates.

The process consists of spraying silver nanoparticles onto the substrate while a patterned or modulated laser beam is focused onto the sprayed nanoparticles. These nanoparticles exposed under the modulated laser light undergo partial melting or sintering and adhere to the …

Decentralized Coordinated Ilc System Design And Transient Growth Control Using Iteration-Varying Filter, Qing Liu

Masters Theses

"In automation control area, with the increasing demand in task complexity and high control precision, coordination between systems is required. There are mainly two types of coordinated systems, decentralized and centralized. This thesis is focused on a large array of coordinated systems, and the decentralized structure is preferred. To achieve high control precision in a coordinated system, many existing approaches may work, and in the system performing the repeating process, Iterative Learning Control (ILC) is a useful approach. Therefore, in this thesis, a decentralized coordinated ILC system is proposed and analyzed. The proposed control system is especially useful in coordinating …

Integration And Characterization Of An Electrical Storage System For A Hydrogen Fuel Cell Plug-In Hybrid Electric Vehicle, Edward Alexei Anculle Arauco

Masters Theses

"Hydrogen fuel cell hybrid vehicles are an advance technology that promises to solve the energy crisis in transportation and green houses emissions. Even more, Plug-in or extended range vehicles can add diversity in energy sources. Extended range vehicles have the capability to extract energy from the grid and hence reduce the cost of operation of the vehicle. EcoCAR: the NeXt Challenge is a Noth [sic] American competition with seventeen schools participating across North America. Missouri S&T is developing a Fuel Cell Plug-in Hybrid electric vehicle which has a large lithium-ion battery able to store 16 kWh. The fuel cell powertrain …

Validation Of Driving Simulator And Driver Perception Of Vehicle Mounted Attenuator Markings In Work Zones, Durga Raj Mathur

Masters Theses

"This research work sought to validate the driving simulator at Missouri University of Science and Technology and to evaluate the vehicle mounted attenuator (VMA) markings for various times of day. For comprehensive validation of the driving simulator, a framework is proposed which is demonstrated using a fixed-base driving simulator. Objective and subjective evaluations were conducted, and validation of the driving simulator was performed at specific locations and along the highway. Field data were collected for a partial lane closure using a global positioning system (GPS) along the work zone and supplemented with video recordings of traffic data at specific locations …