Mechanical Engineering Commons^™

Guidance And Navigation Linear Covariance Analysis For Lunar Powered Descent, Travis J. Moesser

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A linear covariance analysis is conducted to assess closed-loop guidance, navigation, and control system (GN&C) performance of the Altair vehicle during lunar powered descent. Guidance algorithms designed for lunar landing are presented and incorporated into the closed-loop covariance equations. Navigation-based event triggering is also included in the covariance formulation to trigger maneuvers and control dispersions. Several navigation and guidance trade studies are presented demonstrating the influence of triggering and guidance and study parameters on the vehicle GN&C performance.

A Study On Stainless Steel 316l Annealed Ultrasonic Consolidation And Linear Welding Density Estimation, Raelvim Gonzalez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Ultrasonic Consolidation of stainless steel structures is being investigated for potential applications. This study investigates the suitability of Stainless Steel 316L annealed (SS316L annealed) as a building material for Ultrasonic Consolidation (UC), including research on Linear Welding Density (LWD) estimation on micrographs of samples. Experiment results are presented that include the effect of UC process parameters on SS316L annealed UC, optimum levels of these parameters, and bond quality of ultrasonically consolidated SS316L annealed structures in terms of LWD. In support to these efforts, a Measurement System Analysis for LWD assessment has been performed, and a new instrument for LWD measurement …

Vortex Apparatus And Demonstrations, Said Shakerin

All Faculty Articles - School of Engineering and Computer Science

Vortex flow, from millimeter to kilometer in scale, is important in many scientific and technological areas.1 Examples are seen in water strider locomotion, from industrial pipe flow (wastewater treatment) to air traffic control (safe distance between aircrafts on a runway ready for takeoff) to atmospheric studies.2-5 In this paper, we focus on a particular vortex known as bathtub vortex (BTV). It occurs when water is drained from a hole at the bottom of a container such as a bathtub or a sink under the action of gravity. The vortex has a funnel shape with a central air core, resembling a …

Catheter Laser Drill, Brady Haug

Industrial Technology and Packaging

The project that I have undertaken is to improve upon an existing machine and process at Applied Medical, a medical device company. The machine is used to drill four holes into the body of a catheter. The holes are located on a linear axis, rotated 90 degrees apart from each other. Currently, the machine utilizes a traditional drill bit to create the four holes. This creates burrs along the holes, which increases the manufacturing time because a worker must remove them. The project calls for the use of a laser to replace the drill bit. The machine designed through this …

Coupled Dem-Fem For Dynamic Analysis Of Granular Systems In Bending, Kitti Rattanadit

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Characterizing the dynamic behavior of granular materials is one of the great challenges in the mechanics of granular matter. Methods for evaluating the mechanical properties of granular matter have applications in a variety of industries, mining and geotechnical activities, defense and military operations. A coupled 2D Discrete Element Method-Finite Element Method (DEM-FEM) code, called "BobKit", is developed and implemented for analyzing the behavior of a 2D granular layer on top of an elastic beam under deforming (quasi-static) or vibrating (dynamic) of the beam. The explicit time-integration dynamic code is used to simulate quasi-static and dynamic bending of the granular layer …

Eutectic Solidification Limits And Mechanical Properties Of Sm–Co–Fe Alloys, Wendy Ann Wagner

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Creating a permanent magnet with a higher energy product than existing materials is attractive in order to optimize magnetic performance. The eutectic microstructure of Sm-Co alloys is attractive for magnets since primary rods of the Co-phase can act as a soft magnetic phase in the matrix of the Sm₂Co₁₇ hard magnetic phase, forming two-phase magnets. Fe replacement in Sm-Co alloys provides an opportunity to maintain the desirable eutectic microstructure of Co_1-xFe_x rods embedded in a Sm₂(Co_1-xFe_x)₁₇ matrix while improving the magnetization and lowering the cost. The purpose …

Adaptive Cutting Force Control For Process Stability Of Micro Ultrasonic Machining, Ala'a M. Al-Okaily

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The growing demand for miniaturized products motivates the advancement in micromanufacturing processes research and development. Micro Ultrasonic Machining (Micro USM) is a downscaled version of a macro USM process that is developed to fabricate complex features in chemically inert, nonconductive, hard, brittle materials such as quartz, glass, and ceramics. These materials have many applications in various fields such as optics, electronics, MEMS, and biotechnology. The micro USM process stability is hard to accomplish, because it is highly influenced by the accuracy of the machining system and the variation of the process control parameters. The repeatability of micro USM machined features …

Flying Blanket, Keane Daquioag, Ryan Grable, Eric Reynolds, Kaitlin Spak

Mechanical Engineering

This report contains the design plan for PolyNet Design’s Senior Design Project. The PolyNet Design team comprises four mechanical engineering seniors who created a prototype for Raytheon Missile Systems. The overall goal of this project was to create a system that will launch a blanket from a packaged and folded state to an unfurled state and then securely wrap the blanket around a target. The team began with five initial concepts, and chose the Four-Rod model as their first construction concept. Construction of the Four Rod model evolved through several design iterations. The team tested the final prototype extensively, using …

Cal Poly Sit Ski: Final Report, Marc Bergreen, David Bydalek, Ross Gompertz

Mechanical Engineering

The purpose of this project was to design, build, and test a Sit Ski for the US Adaptive Ski Team. The design is for Mr. Marlon Shepard, a new competitor on the Ski Team, who is in need of a new racing sit ski. Some of the top design priorities include reduced weight, increased rider comfort, and increased durability over existing designs. With these design considerations in mind, our team from Cal Poly designed, built and tested a cross country sit ski in June 2010 at the mechanical engineering senior project expo. The project was sponsored by a National Science …

Modeling The Momentum And Mass Transfer Within A Micro-Scale Polymer Electrolyte Membrane Fuel Cell For Flows Within The Slip Flow Regime, Sean Tamarun Goudy

Dissertations

Polymer Electrolyte Membrane (PEM) fuel cell systems are heterogeneous catalytic systems. Although there are many computational models that describe the behavior of PEM fuel cells, few simulate the catalyst surface concentration of reactant gases at the catalyst layer-membrane layer inteface. Most PEM fuel cell models make no distinction between the bulk concentration of reactants and the catalyst surface concentration of reactants. It is the surface concentration that is key when studying PEM fuel cell systems: the reactions occur at the surface of the catalyst.

In addition, few model the dynamics within the non-continuum flow region near the solid surfaces of …

Optimum Failure Truncated Testing Strategies, Erik Kostandyan

Dissertations

Accumulated fatigue damage on mechanical components due to random stress loads eventually causes failure. Therefore products with lower failure rates are more desirable. Testing mechanical components for their intended purpose under predetermined working conditions is a common practice used by industries to prevent failures. Fatigue tests are categorized as Time Truncated or Failure Truncated, known in the literature as Type I and Type II tests, respectively. In failure truncated tests, the mechanical components are tested until the desired number of results is obtained. The parameters of a typical failure truncated test include the capacity of the test facility, the actual …

Evaluation Of Quasi-Static Indentation Damage In Aluminum Honeycomb Core - Graphite/Epoxy Sandwich Structures, David Eisenberg

Renée Crown University Honors Thesis Projects - All

Sandwich composites utilize a low density core and relatively stiff face sheets. These structures are ideal for applications that require high compressive strength, high bending stiffness, and very low weight such as aerospace vehicles. However, one problem with sandwich composites is their susceptibility to low velocity impact damage. Low velocity impacts result in both external damage, in the form of dents, and internal damage, in the form of core crushing, face sheet delaminations (two adjacent plies separating from one another), fiber fractures and matrix cracks. In general, it is assumed that visibly evident damage will be repaired. Barely visible impact …

Hydrogen Separation Membranes, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Technical brief describing hydrogen separation membranes and their potential to reduce cost of hydrogen production and CO₂ separation. Outlines membrane types, commercially available membranes, and new technological developments. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

Design And Analysis Of A Low Temperature Co-Fired Ceramic Micro Combustor, Matthew H. Mccrink

Boise State University Theses and Dissertations

This thesis details the design and construction of a Low Temperature Co-Fired Ceramic (LTCC) micro combustion system. The design of the combustor requires a detailed analysis of the flame’s operational properties and stability. To this end, an analytic model was created to address these concerns. These results were used in conjunction with a detailed numerical analysis to determine the stable operating range of the combustors. The combustion of gaseous fuels requires a device with a lower bound on the channel feature size. This lower limit for combustion corresponds to the minimum quenching distance of the specific fuel being used and …

Gas-Assisted Powder Injection Molding: A Comparison Of Residual Wall Thickness Between Metal Cavity Vs. Sla Cavity And Effect Of Mold Temperature On Residual Wall Thickness, Donghan Kim

Theses and Dissertations - UTB/UTPA

The effects of processing variables on gas penetration depth and Residual Wall Thickness (RWT) in an aluminum (Al) cavity of Gas-Assisted Injection Molding (GAIM) were investigated with Polypropylene (PP) and Stainless Steel Powder Feedstock (SSPF). The selected processing variables were melt temperature, shot size, gas pressure, and gas delay time. By using a Taguchi L9 array, the results were compared with previous work. For PP, there were no significant differences on gas penetration depth. However, the significance of gas delay time was relatively higher in an Al cavity as compared to a Stereolithography (SLA) cavity from previous work with SSPF. …

Design And Scale-Up Of Production Scale Stirred Tank Fermentors, Ryan Z. Davis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In the bio/pharmaceutical industry, fermentation is extremely important in pharmaceutical development, and in microbial research. However, new fermentor designs are needed to improve production and reduce costs of complex systems such as cultivation of mammalian cells and genetically engineered micro-organisms. Traditionally, stirred tank design is driven by the oxygen transfer capability needed to achieve cell growth. However, design methodologies available for stirred tank fermentors are insufficient and many times contain errors. The aim of this research is to improve the design of production scale stirred tank fermentors through the development of dimensionless correlations and by providing information on aspects of …

Mathematical Modeling Of Light Utilization And The Effects Of Temperature Cycles On Productivity In A Steady-State Algal Photobioreactor, Peter Edwin Zemke

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The work presented here investigated two methods of improving productivity in microalgal photobioreactors: applying temperature cycles intended to maximize photosynthesis and minimize respiration, and development of a mathematical model that predicts improvements in photon utilization using temporal light dilution (flashing).

The experiments conducted on diurnal temperature cycles with Dunaliella tertiolecta in 30-L outdoor photobioreactors showed that a properly chosen temperature cycle can improve mass and energy productivity by 18% over an identical photobioreactor with a constant temperature. However, excessively large temperature cycle amplitudes reduced productivity. A 4-7% increase in energy content was observed in microalgae exposed to temperature cycles. The …

Design Of A Single Alkaline Fuel Cell Test Bed, James Brunton, David Kennedy, Fergal O'Rourke, Eugene Coyle

Conference Papers

This Research focuses on the design and development of a single alkaline fuel cell test bed facility. The paper also makes reference to problems and solutions encountered during construction that resulted in a more effective fuel cell and operating system. As a sustainable and clean alternative energy option, fuel cell technology has the potential to provide electrical power for stationary and mobile applications. Hydrogen and fuel cell technologies are a viable long term energy solution, but to-date has failed to make a major impact on the energy market. Fuel Cells offer a sustainable energy options that can be cost effective …

Development Of Hydrogen Direct Injection For Conversion Of Internal Combustion Engines, Maxwell A. Wilson

UNLV Theses, Dissertations, Professional Papers, and Capstones

The trend toward usage of vehicles that operate on alternative, renewable forms of energy storage has generated areas for development of new products that will facilitate implementation of new automotive fuel systems. As the reality of a hydrogen-fueled economy emerges, intermediate technologies may be necessary for the transition between hydrocarbon fueled internal combustion engines and hydrogen powered fuel cells. The University of Nevada Las Vegas Center for Energy Research has developed a method for converting the common hydrocarbon fueled internal combustion engine to hydrogen direct injected fueling. This thesis describes the second phase of development and involves the design, fabrication …

An Information Technology Suitability Index For Mass Customization, Oscar Leonardo Barrenechea

Theses and Dissertations - UTB/UTPA

In today’s manufacturing world, high competitive markets are pushing companies to find better ways to satisfy their customer’s needs using several Mass Customization (MC) approaches. Consequently, new Information Technologies (IT) have taken a very important role in order to manage the increasing amount of data generated from those customers. The purpose of this thesis is to develop an IT suitability index for MC that would help to identify the critical IT factors to be addressed in order to efficiently support MC. A linear programming regression model was utilized to generate index values. Finally, the results of this model could be …