Mechanical Engineering Commons^™

Modeling Of Gas Turbine-Based Combined Cycle Power Plant, Farshid Zabihian, Alan S. Fung

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 5: Numerical Methods; pp. 203-210

Mathematical Analysis Of Rope Braiding, Mitchell J. Isaac, Chad L. Rodekohr, David J. Branscomb

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 5: Numerical Methods; pp. 211-218

Mixing Time Determination Of Steady And Pulse Jet Mixers, Ibraheem R. Muhammad, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 6: Fluids Engineering; pp. 221-227

Cloud Height Measurements In Jet Mixed Tanks, Ibraheem R. Muhammad, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 6: Fluids Engineering; pp. 236-243

How The Latest Developments In Fastening Testing Systems Can Be Applied To Establishing And Verifying A Tightening Strategy For Cylinder Head Bolts, Brain S. Munn

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 7: Design & Manufacturing; pp. 253-257

Development, Testing, And Comparison Of A Regular Braided Eye Splice, Austin Yuill, Caitlin Plunket, David Branscomb, Chad Rodekohr

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 7: Design & Manufacturing; pp. 266-269

The Effect Of Various Gurney Flap Shapes On The Performance Of Wind Turbine Airfoils, Mohammad Mohammadi, Ali Doosttalab, Mehdi Doosttalab

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 6: Fluids Engineering; pp. 244-250

Asme Early Career Technical Journal (End Matter), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 277-280

Field Evaluation Of Commercial People Counter To Measure Occupancy For Hvac Applications, Trevor D. Wolf, Donald P. Alexander, Sheldon M. Jeter, Gregory M. Spiro

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 7: Design & Manufacturing; pp. 258-265

Silk Cryogels For Microfluidics, Christopher David Hinojosa

Dissertations and Theses

Silk fibroin from silkworm cocoons is found in numerous applications ranging from textiles to medical implants. Its recent adoption as a biomaterial is due to the material's strength, biocompatibility, self-assembling behavior, programmable degradability, optical clarity, and its ability to be functionalized with antibodies and proteins. In the field of bioengineering it has been utilized as a tissue scaffolding, drug delivery system, biosensor, and implantable electrode. This work suggests a new application for porous silk in a microscale chromatography column. We demonstrate in situ cryotropic polymerization of highly porous structures in microscale geometries by freezing aqueous silk with a solvent. The …

A Statically Balanced Shape-Shifting Surface, Joseph Eugene Pishnery

USF Tampa Graduate Theses and Dissertations

ABSTRACT

This paper presents a concept for producing a Statically Balanced Shape-Shifting Surface (SB-SSS). In this context, an SB-SSS is a surface that can require near-zero magnitude force changes to accomplish a change in shape while retaining effectiveness as a physical barrier. This paper focuses on how to statically balance a specifically-designed compliant mechanism and how to incorporate this mechanism into a polygonal cell.

The mechanism consists of a compliant Peaucellier-Lipkin linkage layered with a pre-stressed link as the balancer. Previous work is presented that can show how a polygonal cell can be incorporated into a surface via a tiling …

Effects Of Random Cross-Sectioned Distributions, Fiber Misalignment And Interphases In Three-Dimensional Composite Models On Transverse Shear Modulus, Jarrett Zitko

USF Tampa Graduate Theses and Dissertations

Finite element analysis was implemented to evaluate the transverse shear modulus of a unidirectional glass/epoxy fiber-matrix composite based on pure shear displacement boundary conditions. Unit cells consisting of three-dimensional glass cylinders surrounded in square-cuboid epoxy matrices were modeled to represent "Representative Volume Element" (RVE) configurations in periodic and random-periodic square cell arrangements of variable size. Three RVEs were constructed and analyzed: A single unit cell, a 9-cell (3 x 3) array, and a 25-cell (5 x 5) array. Additionally, the unit cell was modeled to include an interphase. Three sets of cell arrangements were constructed and evaluated: a periodic square …

Dolphin Sound Production And Distribution On The West Florida Shelf, Peter Simard

USF Tampa Graduate Theses and Dissertations

This dissertation is an investigation of dolphin sound production and distribution off west central Florida. Although a wealth of information exists on the production of common sounds (whistles, echolocation) made by captive, trained dolphins, far less is known about free-ranging dolphin sound production and of unusual sounds. In addition, while inshore dolphin populations or communities are the subjects of research projects in many locations, dolphins in offshore waters are less commonly studied. The objectives of this dissertation were to contribute information on free-ranging dolphin sounds and continental shelf dolphin distribution.

While echolocation has been rigorously studied in captive, trained dolphins, …

Prevailing Torque Locking Feature Wear-Out, Adam Joseph Charles Zimandy

USF Tampa Graduate Theses and Dissertations

This thesis provides much needed representative sample data for reuse life of fully seated and torqued locknuts. Most national requirements for prevailing torque locking fasteners only specify unseated reuse life. This could create a potentially dangerous situation if unseated is misinterpreted for seated. This thesis provides comparative data for seated verses unseated configuration. Six aerospace, 3 all-metal and 3 nylon insert, and one non-aerospace locknuts were tested at preloads levels of unseated, 66%, 75%, and 85% of yield of bolt. The locknuts tested are MS21043-4, NAS1291-4, NAS1805-4, MS17825-4, MS21044D4, NAS1021N4, and Grade 8. A fixture was created in order to …

Structural Response And Dynamics Of Fluid-Structure-Control Interaction In Wind Turbine Blades, Lucan Ignacio Lago

Dissertations, Master's Theses and Master's Reports - Open

Reducing the uncertainties related to blade dynamics by the improvement of the quality of numerical simulations of the fluid structure interaction process is a key for a breakthrough in wind-turbine technology. A fundamental step in that direction is the implementation of aeroelastic models capable of capturing the complex features of innovative prototype blades, so they can be tested at realistic full-scale conditions with a reasonable computational cost.

We make use of a code based on a combination of two advanced numerical models implemented in a parallel HPC supercomputer platform: First, a model of the structural response of heterogeneous composite blades, …

Development Of One-Dimensional And Two-Dimensional Computational Tools That Simulate Steady Internal Condensing Flows In Terrestrial And Zero-Gravity Environments, Soumya Asimkumar Mitra

Dissertations, Master's Theses and Master's Reports - Open

This dissertation presents an effective quasi one-dimensional (1-D) computational simulation tool and a full two-dimensional (2-D) computational simulation methodology for steady annular/stratified internal condensing flows of pure vapor. These simulation tools are used to investigate internal condensing flows in both gravity as well as shear driven environments. Through accurate numerical simulations of the full two dimensional governing equations, results for laminar/laminar condensing flows inside mm-scale ducts are presented. The methodology has been developed using MATLAB/COMSOL platform and is currently capable of simulating film-wise condensation for steady (and unsteady flows). Moreover, a novel 1-D solution technique, capable of simulating condensing flows …

Computational Fluids Domain Reduction To A Simplified Fluid Network, Robert E. Smith

Dissertations, Master's Theses and Master's Reports - Open

The primary goal of this project is to demonstrate the practical use of data mining algorithms to cluster a solved steady-state computational fluids simulation (CFD) flow domain into a simplified lumped-parameter network. A commercial-quality code, “cfdMine” was created using a volume-weighted k-means clustering that that can accomplish the clustering of a 20 million cell CFD domain on a single CPU in several hours or less. Additionally agglomeration and k-means Mahalanobis were added as optional post-processing steps to further enhance the separation of the clusters. The resultant nodal network is considered a reduced-order model and can be solved transiently at a …

Mechanical Modeling Of Intraneural Ganglion Cyst, Puneet Soman

Dissertations, Master's Theses and Master's Reports - Open

Intraneural Ganglion Cyst is a 200 year old mystery related to nerve injury which is yet to be solved. Current treatments for the above problem are relatively simple procedures related to removal of cystic contents from the nerve. However, these treatments may result into neuropathic pain and recurrence of the cyst. The articular theory proposed by Spinner et al., (Spinner et al. 2003) takes into consideration the neurological deficit in Common Peroneal Nerve (CPN) branch of the sciatic nerve and affirms that in addition to the above treatments, ligation of articular branch results into foolproof eradication of the deficit. Mechanical …

Torque Converter Turbine Noise And Cavitation Noise Over Varying Speed Ratio, Chad Michael Walber

Dissertations, Master's Theses and Master's Reports - Open

These investigations will discuss the operational noise caused by automotive torque converters during speed ratio operation. Two specific cases of torque converter noise will be studied; cavitation, and a monotonic turbine induced noise. Cavitation occurs at or near stall, or zero turbine speed. The bubbles produced due to the extreme torques at low speed ratio operation, upon collapse, may cause a broadband noise that is unwanted by those who are occupying the vehicle as other portions of the vehicle drive train improve acoustically. Turbine induced noise, which occurs at high engine torque at around 0.5 speed ratio, is a narrow-band …

Laser Thomson Scattering Measurements Of Electron Temperature And Density In A Hall-Effect Plasma, Robert L. Washeleski

Dissertations, Master's Theses and Master's Reports - Open

Hall-effect thrusters (HETs) are compact electric propulsion devices with high specific impulse used for a variety of space propulsion applications. HET technology is well developed but the electron properties in the discharge are not completely understood, mainly due to the difficulty involved in performing accurate measurements in the discharge. Measurements of electron temperature and density have been performed using electrostatic probes, but presence of the probes can significantly disrupt thruster operation, and thus alter the electron temperature and density. While fast-probe studies have expanded understanding of HET discharges, a non-invasive method of measuring the electron temperature and density in the …