Other Mechanical Engineering Commons^™

Improvement Of Labyrinth Seal Leakage Rates Using Additive Manufacturing, Austin L. Gasbarra

Master's Theses

The growing popularity of additive manufacturing in commercial applications has al- lowed for new ideas and new ways of thinking when designing components. Further optimization at the component level is possible, though powder metallurgy is in its infancy. This study explores the possibility of using additive manufacturing to develop better labyrinth seals in turbomachinery. Labyrinth seals have a torturous fluid path with high losses, thus limiting the amount of fluid leakage. These types of seals can be non-rotating, allowing them to better take advantage of the additive manufacturing process due to the absence of rotating stresses. Labyrinth seal performance is …

Sustainable Drug Release From Polycaprolactone Coated Chitin‑Lignin Gel Fibrous Scaffolds, Turdimuhammad Abdullah, Kalamegam Gauthaman, Azadeh Mostafavi, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Ali Tamayol, Adnan Memic

Department of Mechanical and Materials Engineering: Faculty Publications

Non-healing wounds have placed an enormous stress on both patients and healthcare systems worldwide. Severe complications induced by these wounds can lead to limb amputation or even death and urgently require more effective treatments. Electrospun scaffolds have great potential for improving wound healing treatments by providing controlled drug delivery. Previously, we developed fibrous scaffolds from complex carbohydrate polymers [i.e. chitin-lignin (CL) gels]. However, their application was limited by solubility and undesirable burst drug release. Here, a coaxial electrospinning is applied to encapsulate the CL gels with polycaprolactone (PCL). Presence of a PCL shell layer thus provides longer shelf-life for the …

Data Analysis To Evaluate The Performance Of Breathing Masks Used For Filtering Nano-Level Particles At Manufacturing Sites, Gracia M. Dardano

Honors College Theses

The work performed in this research aims to evaluate the performance of commercially available breathing masks in filtering airborne nanoparticles at manufacturing sites. Nanoparticles are found virtually anywhere, from dust in a worksite to a simple sneeze. Therefore, they pose a substantial threat to human health as their velocity and volatility are high. This research analyzes if current efforts of breathing masks to hinder nanoparticles are effective, especially at manufacturing sites. Data has been collected in order to analyze the behavior of nanoparticles and to measure nanoparticle levels at manufacturing sites and its working environment. Data is statistical in nature …

Centrifugal Microfluidic Platform For Solid-Phase-Extraction (Spe) And Fluorescence Detection Applications, Yong Zhang

LSU Doctoral Dissertations

Solid phase extraction (SPE) is a widely used method to separate and concentrate the target molecules in liquid mixture. Traditional SPE has to be conducted in the laboratory with professional equipment and skilled operators. The microfluidic and 3D printing technology have opened up the opportunity in developing miniaturized automatic instruments. The main contribution of this research is to integrate the SPE process on a novel centrifugal platform. Various valves are applied on the platform to help control the aqueous sample and reagents in the cartridge.

First, a centrifugal microfluidic platform was built for automatically detecting trace oil pollution in water. …

Bibliometric Survey On Supply Chain In Healthcare Using Artificial Intelligence, Shruti Maheshwari, Gagandeep Kaur, Ketan Kotecha, Pramod Kumar Jain Dr.

Library Philosophy and Practice (e-journal)

With the increasing demand for the supply chain in the service sector, new techniques have become essential. With the latest emerging technologies, it has become crucial to have a bibliometric analysis of supply chain management (SCM) in the healthcare sector. The paper represents the analysis of research supply chain in the service sector using artificial intelligence techniques. The main aim of the analysis is to accomplish the technology in healthcare supply chain management using SCOPUS, Google Scholar, Research Gate, etc. and the various softwares like Gephi, GSP Visualizer, etc. The bibliometric analysis shows that India has ranked 4th in publishing …

Portable Wind Turbine Blade Leading Edge Erosion Test, Joe Blakewell, Tim Holt, Kevin Vartan

Mechanical Engineering

Turbine Technology Partners, LLC (TTP) is a company located in Santa Barbara, California that provides expert independent engineering (IE) consulting services to the wind energy industry - supporting its goal of generating cost effective and reliable carbon-free renewal energy for the world. TTP customers include some of the largest wind turbine original equipment manufacturers (OEMs), wind turbine power plant developers, and wind turbine owner/operators. One of the biggest problems challenging the wind energy industry currently is the power loss that results from the leading edge (LE) erosion of wind turbine blades. The purpose of our senior design project is to …

Bolted Flanged Assembly Test Stand, Mark Christian Damasco Sunga, Paulina Mercedez Delgado, Philip John Coleman

Mechanical Engineering

The following Final Design Report (FDR) is the last formal documentation for the senior design project. The project was carried out by three senior mechanical engineering students at California Polytechnic State University, San Luis Obispo for Phillips 66. The project proposed was to design a test stand and implement a procedure which will evaluate craftsmen’s abilities to assemble a bolted flanged joint assembly. The goal was to create a fully functional test setup that can be duplicated and utilized throughout Phillips 66’s refineries. This document details the design process that was completed over the course of three quarters, including concept …

Deep-Sea Water Collector, Chandler Jones, Jenny Verheul, Michael Di Giorgio

Mechanical Engineering

Properties such as nutrients, DNA, pH levels, and primary productivity are difficult to measure onboard an Underwater Remotely Operated Vehicle (UROV) as mobile submarine sensors are highly expensive and conventional water capture devices are too large to be equipped. However, these properties provide an integral view into our oceans, the species that inhabit them, and our influence on the environment. Collected samples of seawater taken back to labs allow researchers to see a clearer picture of ecosystems’ inhabitants and lifecycle with the analysis of Environmental DNA (eDNA) among many other properties. The scope of this project is to design a …

Extending The Functional Subnetwork Approach To A Generalized Linear Integrate-And-Fire Neuron Model, Nicholas Szczecinski, Roger Quinn, Alexander J. Hunt

Mechanical and Materials Engineering Faculty Publications and Presentations

Engineering neural networks to perform specific tasks often represents a monumental challenge in determining network architecture and parameter values. In this work, we extend our previously-developed method for tuning networks of non-spiking neurons, the “Functional subnetwork approach” (FSA), to the tuning of networks composed of spiking neurons. This extension enables the direct assembly and tuning of networks of spiking neurons and synapses based on the network’s intended function, without the use of global optimization ormachine learning. To extend the FSA, we show that the dynamics of a generalized linear integrate and fire (GLIF) neuronmodel have fundamental similarities to those of …

Optimal Control Of Active Nematics, Michael M. Norton, Piyush Grover, Michael F. Hagan, Seth Fraden

Department of Mechanical and Materials Engineering: Faculty Publications

In this work we present the first systematic framework to sculpt active nematic systems, using optimal control theory and a hydrodynamic model of active nematics. We demonstrate the use of two different control fields, (i) applied vorticity and (ii) activity strength, to shape the dynamics of an extensile active nematic that is confined to a disk. In the absence of control inputs, the system exhibits two attractors, clockwise and counterclockwise circulating states characterized by two co-rotating topological þ1 2 defects. We specifically seek spatiotemporal inputs that switch the system from one attractor to the other; we also examine phase-shifting perturbations. …

Microfluidic Systems With Embedded Cell Culture Chambers For High Throughput Biological Assays, Arian Jaberi, Amir Monemian Esfahani, Fariba Aghabaglou, Jae Sung Park, Sidy Ndao, Ali Tamayol, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

The ability to generate chemical and mechanical gradients on chips is important both for creating biomimetic designs or enabling high-throughput assays. However, there is still a significant knowledge gap in the generation of mechanical and chemical gradients in a single device. In this study, we developed gradient-generating microfluidic circuits with integrated microchambers to allow cell culture and to introduce chemical and mechanical gradients to cultured cells. A chemical gradient is generated across the microchambers, exposing cells to a uniform concentration of drugs. The embedded microchamber also produces a mechanical gradient in the form of varied shear stresses induced upon cells …

Impact Of Sintering Time And Temperature On Mechanical Properties In Projection Sintering Of Polyamide-12, Justin Nussbaum, Taranjot Kaur, Julie Harmon, Nathan B. Crane

Faculty Publications

In powder bed fusion additive manufacturing (AM), the fusing process is temperature and time dependent. However, little work has been done to understand how different processing temperatures and times might impact the mechanical properties at longer sintering times than are typical in laser sintering (LS) systems. Prior results with projection sintering have shown that heating for longer times (>1s) improves part toughness compared to laser sintering. In this work, Large Area Projection Sintering (LAPS) is used to sinter entire layers of material simultaneously over the course of a few seconds with spatial control of layer temperature. This work evaluates …

A New Technical Solution For Cleaning The Water Intake Structure Of Pumping Stations From Siltation And Its Experimental Research, M.M. Mukhammadiev, S.R. Juraev

Irrigation and Melioration

The article considers one of the most pressing problems of pumping stations in the irrigation system today, their blurring of the bottom of the water intake (avancamera and water intake chambers), analyzes the existing proposals, designs and technical solutions and their advantages and disadvantages. Given the above advantages and disadvantages, a new design has been proposed for the treatment of water intake structures from turbid sediments with minimal energy and capital expenditures, very cheap and simple to operate and reliable. The design includes a turbid suction pump and a turbid pump, as well as a pulp pipeline. The pressurized water …

Assessing Surface Water Features Using Landsat-8 Oli And Sentinel-1 Satellite Images Case Study Sirdaryo Region, S.M. Muratov, Kh.A. Abdivaitov, Sh.F. Rahmatillayev

Irrigation and Melioration

Water resources have become a very big problem in every part of Uzbekistan for several decades. Water is used not only exclusively for agricultural development, but also for many other purposes, such as industrial and chemical activities. Therefore, it is important to study the properties of surface water objects using optical and microwave satellite images. The Syrdarya region was selected for research. Because in the past, there have been no studies of water bodies using satellite images. The article presents the results of studies on the assessment of water properties from optical and microwave satellite images. In research for optical …

Distribution Of Pressure And Specific Energy In The Twirled Stream For Confusor, A.A. Yangiev, D.S. Adjimuratov

Irrigation and Melioration

Article brings up the advantage of confusor part application in outflow part of vortex spillway, which may be more rational from the point of view of providing non-cavitation operation of flow swirler. Analytical design method and program developed is given of pressure and specific energy for aerated part of swirled flow in vortex spillway confusor part, which match with experimental results, it allows for fast and quite accurate realization of distribution analysis for pressure and specific energy in swirled flow along the length of the confusor for various rates of taper.

Economic Assesment Of The Impact Of Climate Factors On Wheat Yield In Samarkand Region, Sh.B. Babakholov

Irrigation and Melioration

Agricultural production is highly vulnerable to climate shocks and predicted climate consequences may pose severe challenges to the resilience of Uzbek agricultural system, especially in terms of food security and income stability of rural producers. In this context, present study proposed to assess the impact of climate factors, such particular changes in mean temperature and rainfalls on total output of wheat-cultivating farmers in Samarkand region. By considering irrigation source and heterogeneous geography of the region, farmers engaged in wheat production were analyzed in two: upstream and downstream zones using Fixed effect panel approach. The empirical findings of study revealed that, …

Change In Level Water In Pumping-Plant Intake, R.R. Ergashev, B.T. Xolbutayev

Irrigation and Melioration

A decrease in the water level in the pump chamber of the pumping stations leads to the formation of whirlpools in front of the suction pipes. As a result of air intake, the pump unit operates in cavitation mode and their intensive wear occurs. As the data obtained from the Karshi machine channel show, mainly a decrease in design water levels in the downstream waters is observed at the first pumping station. Depending on the number of simultaneously operating pumping units, the minimum water level in the head pumping station should be from 4.5 m to 5.7 m. The received …

Modeling The Impact Of Changes In The Ground Water Level On The Stability Of Agricultural Landscapes Using Gis, A.M. Arifjanov, L.N. Samiev, F.K. Babajanov, G.M. Xamdamova, Sh.N. Yusupov

Irrigation and Melioration

The article presents modern GIS methods for determining the stability of changes in irrigated areas and the depth of the ground water level.the most correct solutions are given in modeling this process. To distinguish agricultural landscapes, the classification of agricultural acreage in the lower part of the Amu Darya river region was made using 16-day periodic rasters 2017 of 2018 and the NDIS MOD13Q1 sensor of agricultural acreage, type NDVI. The annual change in the level of underground water in relation to the state of rivers and channels is analyzed. A steady change in agricultural acreage on the right Bank …

Determination And Assessment Of The Spatio-Temporal Changing Dynamics In The Groundwater Level And Mineralization In Irrigated Areas Under Climate Change (As An Example Of Syrdarya Province), S. Khasanov, S. Adilov, R. Kulmatov

Irrigation and Melioration

In the irrigated lands of the Aral Sea Basin, salinization processes are taking place as a result of rising groundwater levels and increasing its mineralization due to the unsustainable use of water and land resources. This, in turn, leads to the withdrawing of arable land and a decrease in crop yields. This is especially the case in the irrigated areas of the lower reaches of the Amudarya and Syrdarya rivers, located in Uzbekistan, southern Kazakhstan, and Turkmenistan. This research was aimed to learn and evaluate the long-term changing behavior of groundwater level and mineralization in the irrigated areas of the …

Increasing The Efficiency Of Water Distribution Management When Operating Pumping Stations Of The Irrigation System, O.Y. Glovatsky, R.R. Ergashev, B. Hamdamov, N.M. Ismailov, B.T. Kholbutaev

Irrigation and Melioration

The article is to control the parameters of the unsteady movement of water in the canals and the pumping station, which ensure the maintenance of the specified operating modes of the pumping stations under non-stationary conditions. To achieve this goal, it is necessary to solve the problems of coordinating the operating modes of the units of the head pumping station (PS) with the operating modes of the partitioning structures in the conditions of emptying and filling the ponds of the main canal with water. The article discusses the implementation of the method of water distribution control on the mathematical model …