Test 2090a: John Deere 7r 230,
2021
University of Nebraska-Lincoln
Test 2090a: John Deere 7r 230, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2231: John Deere 8r 250,
2021
University of Nebraska-Lincoln
Test 2231: John Deere 8r 250, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2243a: New Holland T8 435 Ultra Command Smartrax,
2021
University of Nebraska-Lincoln
Test 2243a: New Holland T8 435 Ultra Command Smartrax, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2243: Case Ih Magnum 400 Rowtrac,
2021
University of Nebraska-Lincoln
Test 2243: Case Ih Magnum 400 Rowtrac, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2242: Case Ih Magnum 400,
2021
University of Nebraska-Lincoln
Test 2242: Case Ih Magnum 400, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Nebraska Summary 1218s: Fendt 724 Vario Gen6,
2021
University of Nebraska-Lincoln
Nebraska Summary 1218s: Fendt 724 Vario Gen6, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2240: Kubota M8-231,
2021
University of Nebraska-Lincoln
Test 2240: Kubota M8-231, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Advance Metallic Reinforcement Of Vat Photo Polymerized Parts,
2021
University of North Florida
Advance Metallic Reinforcement Of Vat Photo Polymerized Parts, Scott Zinn
UNF Graduate Theses and Dissertations
The metallization or metallic reinforcement of polymer parts has been widely used in industry for several decades. Polymer parts are classically metalized for aesthetics, chemical and thermal resistance, electrical conductivity, and mechanical strength. Metallization has been shown to increase strength of polymer parts when compared to the strength of the bulk material without metallization. Additive manufacturing (AM) techniques that have emerged in the last few decades produce parts with different surface features and chemistry than the typical polymer part produced through injection molding. AM parts are typically weaker than traditionally manufactured parts from the same material due to intrinsic details …
Torrefaction Of Mixed Solid Waste,
2021
Michigan Technological University
Torrefaction Of Mixed Solid Waste, Zhuo Xu
Dissertations, Master's Theses and Master's Reports
The world is witnessing unprecedented accumulation of solid wastes in the environment and landfills with well-documented ecological, environmental, health, and economic consequences. With population growth and rise in living standards, solid wastes generation will increase, making the issue more pressing. In addition, current practices of solid waste disposal are creating an immediate challenge and a long-term disaster-scale problem. The solid wastes comprises two main groups of materials: (i) fiber wastes (paper, food, wood, trimming, 61% of U.S. municipal solid waste) and (ii)uniquely challenging subset of plastic wastes (13%) that become a threat to global sustainability including dangers to marine and …
Transient Maneuvers And Pressure Analysis On An Automotive Torque Converter,
2021
Michigan Technological University
Transient Maneuvers And Pressure Analysis On An Automotive Torque Converter, Abigail A. Hempy
Dissertations, Master's Theses and Master's Reports
This work involves an investigation of internal fluid behavior of an automotive torque converter in a front-wheel drive automatic 6-speed transmission. The fluid behavior is identified through 29 pressure transducers instrumented throughout the torus, acquired through IR Telemetrics multiplexed channels, and analyzed with custom MATLAB code. The main vehicle operating conditions studied in this research are back drive scenarios or low motoring torques. Findings showed speed and torque limits for open converter coast down conditions as well as pressure field behavior with negative input torque.
Design For Additive Manufacturing (3d Printing),
2021
University of Akron
Design For Additive Manufacturing (3d Printing), Michael O'Donnell, Michael J. Levy
Williams Honors College, Honors Research Projects
The goal of this project is to study the performance of a 3D printed mechanical part subjected to topology optimization. A part that is somewhat complex in its load bearing and geometry will be selected. That part will then be designed, finite element analysis will be performed on it to optimize its topology, and then it will be 3D printed and tested. The goal of topology optimization is to either save material cost and/or part weight due to the ability of 3D printing to manufacture parts with complex and obscure geometry.
Chainless Bike Drive,
2021
The University of Akron
Chainless Bike Drive, Dominic Apisa, Bradley Powell, Garrett Colvin, John Monsour
Williams Honors College, Honors Research Projects
The focus of this project was to design a drive system that could replace the conventional chain drive system, improving on both the efficiency and reliability, in addition to being low cost and lightweight. This report will provide background into why this group chose this as the subject of their project, as well as challenges faced throughout the design process. The design developed was a drive shaft driven by a system of pinions and gears, with a freewheel mechanism that allowed the system to coast when not pedaling. Due to cost and time constraints, only a prototype was created, with …
Test 2179a: John Deere 7r 210,
2021
University of Nebraska-Lincoln
Test 2179a: John Deere 7r 210, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2085a: John Deere 7r 250,
2021
University of Nebraska-Lincoln
Test 2085a: John Deere 7r 250, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Nebraska Summary: S1147a Fendt 1038,
2021
University of Nebraska-Lincoln
Nebraska Summary: S1147a Fendt 1038, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Nebraska Summary: S1148a Fendt 1042,
2021
University of Nebraska-Lincoln
Nebraska Summary: S1148a Fendt 1042, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2237: John Deere 8rx 340,
2021
University of Nebraska-Lincoln
Test 2237: John Deere 8rx 340, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2232: John Deere 8r 280,
2021
University of Nebraska-Lincoln
Test 2232: John Deere 8r 280, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2236: John Deere 8rx 310,
2021
University of Nebraska-Lincoln
Test 2236: John Deere 8rx 310, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
Test 2233: John Deere 8r 310,
2021
University of Nebraska-Lincoln
Test 2233: John Deere 8r 310, Nebraska Tractor Test Lab
Nebraska Tractor Tests
ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …
