Materials Science and Engineering Commons^™

Multi-Platform Arabinoxylan Scaffolds As Potential Wound Dressing Materials, Donald C. Aduba Jr

Theses and Dissertations

Biopolymers are becoming more attractive as advanced wound dressings because of their naturally derived origin, abundance, low cost and high compatibility with the wound environment. Arabinoxylan (AX) is a class of polysaccharide polymers derived from cereal grains that are primarily used in food products and cosmetic additives. Its application as a wound dressing material has yet to be realized. In this two-pronged project, arabinoxylan ferulate (AXF) was fabricated into electrospun fibers and gel foams to be evaluated as platforms for wound dressing materials. In the first study, AXF was electrospun with varying amounts of gelatin. In the second study, AXF …

A Study To Evaluate Non-Uniform Phase Maps In Shape Memory Alloys Using Finite Element Method, Naren Motte

Theses and Dissertations

The unique thermo-mechanical behavior of Shape Memory Alloys (SMAs), such as their ability to recover the original shape upon heating or being able to tolerate large deformations without undergoing plastic transformations, makes them a good choice for actuators.

This work studies their application in the aerospace and defense industries where SMA components can serve as release mechanisms for gates of enclosures that have to be deployed remotely. This work provides a novel approach in evaluating the stress and heat induced change of phase in a SMA, in terms of the transformation strain tensor. In particular, the FEA tool

ANSYS has …

Peracetic Acid Sterilization Of Electrospun Polycaprolactone Scaffolds, Suyog Yoganarasimha

Theses and Dissertations

Sterilization of tissue engineered scaffolds is an important regulatory issue and is at the heart of patient safety. With the introduction of new biomaterials and micro/nano structured scaffolds, it is critical that the mode of sterilization preserve these built-in features. Conventional sterilization methods are not optimal for engineered polymeric systems and hence alternate systems need to be identified and validated. PCL is polyester with a low melting point (heat labile), susceptible to hydrolysis and is popular in tissue engineering. Electrospinning generates some nanoscale features within the scaffold, the integrity of which can be affected by sterilization method. Chapter 1 explores …

The Influence Of Particle Content On The Equi-Biaxial Fatigue Behaviour Of Magnetorheological Elastomers, Yanfen Zhou, Stephen Jerrams, Tony Betts, Gerald Farrell, Lin Chen

Articles

The equi-biaxial fatigue behaviour of silicone based magnetorheological elastomers (MREs) with various volume fractions of carbonyl iron particles ranging between 15% and 35% was studied. Wöhler curves for each material were derived by cycling test samples to failure over a range of stress amplitudes. Changes in complex modulus (E*) and dynamic stored energy during the fatigue process were observed. As for other elastic solids, fatigue resistance of MREs with different particle contents was shown to be dependent on the stress amplitudes applied. MREs with low particle content showed the highest fatigue life at high stress amplitudes while MREs with high …

Quantitative Modeling Of The Equilibration Of Two-Phase Solid-Liquid Fe By Atomistic Simulations On Diffusive Time Scales, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, Michael I. Baskes

Materials Science and Engineering Faculty Research & Creative Works

In this paper, molecular dynamics (MD) simulations based on the modified-embedded atom method (MEAM) and a phase-field crystal (PFC) model are utilized to quantitatively investigate the solid-liquid properties of Fe. A set of second nearest-neighbor MEAM parameters for higherature applications are developed for Fe, and the solid-liquid coexisting approach is utilized in MD simulations to accurately calculate the melting point, expansion in melting, latent heat, and solid-liquid interface free energy, and surface anisotropy. The required input properties to determine the PFC model parameters, such as liquid structure factor and fluctuations of atoms in the solid, are also calculated from MD …

Dynamic Phases, Pinning, And Pattern Formation For Driven Dislocation Assemblies, Caizhi Zhou, Charles Reichhardt, Cynthia Olson Reichhardt, Irene J. Beyerlein

Materials Science and Engineering Faculty Research & Creative Works

We examine driven dislocation assemblies and show that they can exhibit a set of dynamical phases remarkably similar to those of driven systems with quenched disorder such as vortices in superconductors, magnetic domain walls, and charge density wave materials. These phases include pinned-jammed, fluctuating, and dynamically ordered states, and each produces distinct dislocation patterns as well as specific features in the noise fluctuations and transport properties. Our work suggests that many of the results established for systems with quenched disorder undergoing plastic depinning transitions can be applied to dislocation systems, providing a new approach for understanding pattern formation and dynamics …

Nanoscale Mechanical Switching Of Ferroelectric Polarization Via Flexoelectricity, Yijia Gu, Zijian Hong, Jason Britson, Long-Qing Chen

Materials Science and Engineering Faculty Research & Creative Works

Flexoelectric coefficient is a fourth-rank tensor arising from the coupling between strain gradient and electric polarization and thus exists in all crystals. It is generally ignored for macroscopic crystals due to its small magnitude. However, at the nanoscale, flexoelectric contributions may become significant and can potentially be utilized for device applications. Using the phase-field method, we study the mechanical switching of electric polarization in ferroelectric thin films by a strain gradient created via an atomic force microscope tip. Our simulation results show good agreement with existing experimental observations. We examine the competition between the piezoelectric and flexoelectric effects and provide …

Systematic Study Of The Biological Effects Of Nitric Oxide (No) Using Innovative No Measurement And Delivery Systems, Weilue He

Dissertations, Master's Theses and Master's Reports

Nitric oxide (NO) is recognized as the most important small signaling molecule in the human body. An imbalance of NO is closely associated with many serious diseases such as neurological disorders, cardiovascular diseases, chronic inflammations and cancers. Herein two chemiluminescence-based devices (a real-time NO measurement device and a controllable NO delivery device) were developed to facilitate the NO quantitative study and obtain information for NO related drug design.

The first device used for real-time measuring NO(g) flux from living cells was developed and validated. The principle was to use a two-chamber design, with a cell culture chamber and a gaseous …

3d Printing, Open-Source Technology And Their Applications In Research, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Open-source software received tremendous success as it drives down the cost of software and expand the distribution. Open-source hardware, as part of the open-source movement, has just risen into public attention for its potential to further drive down the cost of all kinds of manufacturing goods and reshape the manufacture chain. In this report we explores the history, development and the future of open-source hardware project, summarizing the opportunities, challenges and possible solutions. 3D printing is demonstrated as a booster to assist open-source hardware’s development. Low-cost 3D printer enables at-home and in-time fabrication, the download-print-use-improve-distribute cycle is established to encourage …

Measurements Of Rf Properties Of Thin Film Nb3Sn Superconducting Multilayers Using A Calorimetric Technique, S. Sosa-Guitron, A. Gurevich, J. Delayen, E. Chang Beom, C. Sundahl, G. V. Eremeev

Physics Faculty Publications

Results of RF tests of NB₃SN thin film samples related to the superconducting multilayer coating development are presented. We have investigated thin film samples of Nb₃Sn/Al₂O₃/Nb with Nb₃Sn layer thicknesses of 50 nm and 100 nm using a Surface Impedance Characterization system. These samples were measured in the temperature range 4 K-19 K, where significant screening by Nb₃Sn layers was observed below 16-17 K, consistent with the bulk critical temperature of Nb₃Sn.

Biocorrosion Rate And Mechanism Of Metallic Magnesium In Model Arterial Environments, Patrick Bowen

Dissertations, Master's Theses and Master's Reports

A new paradigm in biomedical engineering calls for biologically active implants that are absorbed by the body over time. One popular application for this concept is in the engineering of endovascular stents that are delivered concurrently with balloon angioplasty. These devices enable the injured vessels to remain patent during healing, but are not needed for more than a few months after the procedure. Early studies of iron- and magnesium-based stents have concluded that magnesium is a potentially suitable base material for such a device; alloys can achieve acceptable mechanical properties and do not seem to harm the artery during degradation. …

Monolithic Optofluidic Ring Resonator Lasers Created By Femtosecond Laser Nanofabrication, Hengky Chandrahalim, Qiushu Chen, Ali A. Said, Mark Dugan, Xudong Fan

Faculty Publications

We designed, fabricated, and characterized a monolithically integrated optofluidic ring resonator laser that is mechanically, thermally, and chemically robust. The entire device, including the ring resonator channel and sample delivery microfluidics, was created in a block of fused-silica glass using a 3-dimensional femtosecond laser writing process. The gain medium, composed of Rhodamine 6G (R6G) dissolved in quinoline, was flowed through the ring resonator. Lasing was achieved at a pump threshold of approximately 15 μJ/mm². Detailed analysis shows that the Q-factor of the optofluidic ring resonator is 3.3 × 10⁴, which is limited by both solvent …

Fusion Welding Of Diboride-Carbide Ceramic Composites, Derek Scott King

Doctoral Dissertations

"Plasma and pulsed plasma arc welding (PAW and PPAW) processes were used to fusion weld ZrB₂ containing 20 vol% ZrC. Varying welding parameters resulted in changes in weld pool shape and size, and the size of ZrB₂ grains within the fusion zone. For PAW processes that resulted in a keyhole fusion zone (full penetration), the arc to workpiece power transfer efficiency was estimated to be 2 grain lengths were observed to decrease between binary PAW FZs (~1 mm in length), and binary PPAW FZs (~0.8 mm in length), and an increasing aspect ratio for ZrB₂ grains in …

Preliminary Investigation Into The Cause Of Pinhole Porosity In Aluminum Metal Castings From Serpentine Impurities In Olivine Sand, Brodie J. Biersner

Dissertations and Theses @ UNI

The problem addressed in this study is how contaminates in the foundry molding aggregate olivine, affect aluminum castings during the casting process. This research will concentrate on hydrated contaminates, specifically the mineral serpentine. The purpose of this research is to better understand how hydrated minerals contribute to the generation of pinhole porosity defects during the casting process. Understanding how impurities in foundry aggregates affect the casting process would aid in the reduction of scrap caused by core and molding sands, ultimately providing savings to the casting manufacturer.

A foundry grade olivine was compared to a new source of olivine to …

Phase Transitions And In Situ Dynamics Of Crystal Grain Formation Of Alumina Nanotubes Templated By Vertically Aligned Carbon Nanotubes, L. F. Lampert, A. Barnum, S. W. Smith, J. F. Conley, Jun Jiao

Mechanical and Materials Engineering Faculty Publications and Presentations

Phase transitions of amorphous alumina (a-alumina) nanotubes grown by atomic layer deposition and templated by carbon nanotubes were investigated with thermal annealing, transmitted Kikuchi electron diffraction, electron-irradiation-induced crystallization, X-ray diffraction, and X-ray photoelectron spectroscopy. The resulting, engineered alumina nanotube arrays demonstrate a large range of tunable phases that are vital for understanding how alumina nanotube arrays can be applied for uses within biotechnology, catalysis, and other academic and industrial uses.

Anisotropy Of The Reynolds Stress Tensor In The Wakes Of Wind Turbine Arrays In Cartesian Arrangements With Counter-Rotating Rotors, Nicholas Hamilton, Raúl Bayoán Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

A 4 × 3 wind turbine array in a Cartesian arrangement was constructed in a wind tunnel setting with four configurations based on the rotational sense of the rotor blades. The fourth row of devices is considered to be in the fully developed turbine canopy for a Cartesian arrangement. Measurements of the flow field were made with stereo particle-image velocimetry immediately upstream and downstream of the selected model turbines. Rotational sense of the turbine blades is evident in the mean spanwise velocity W and the Reynolds shear stress −vw. The flux of kinetic energy is shown to be of greater …

Thermodynamic Grain Size Stabilization Models: An Overview, Mostafa Saber, Carl C. Koch, Ronald O. Scattergood

Mechanical and Materials Engineering Faculty Publications and Presentations

Grain boundaries in a nanocrystalline microstructure produce an increase in the excess free energy of the system. Grain growth is a consequence of the thermodynamic driving force reducing this excess. Thermodynamic stabilization is an approach based on eliminating the driving force by suitable alloy additions that can produce a metastable equilibrium state at the nanoscale grain size, as opposed to kinetic stabilization where the grain growth mobility is restricted by pinning and/or drag mechanisms. The present paper reviews and compares various models proposed for thermodynamic stabilization.

Estimation Of Transient Temperature Distribution During Quenching, Via A Parabolic Model, Diego E. Lozano, Gabriela Martinez-Solis, Rafael David Mercado-Solis, Rafael Colás, George E. Totten

Mechanical and Materials Engineering Faculty Publications and Presentations

A material-independent model to estimate the transient temperature distribution in a test probe quenched by immersion is presented in this study. This model is based on the assumption that, under one-dimensional unsteady heat conduction, the radial temperature distribution at the end of an interval belongs to the equation of a parabola. The model was validated using AISI 304 stainless steel test probes (Φ8×40 mm and Φ12×60 mm) quenched from 850 to 900 °C in water and in water-based NaNO2 solutions at 25 °C and in canola oil at 50 °C. Additionally, square test probes (20×20×100 mm) were quenched from 550 …

Influence Of Resonant And Non-Resonant Vibrational Excitation Of Ammonia Molecules In Gallium Nitride Synthesis, Hossein Rabiee Golgir, Yunshen Zhou, Kamran Keramatnejad, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Attempts on the selective promotion of gallium nitride (GaN) growth were investigated by deploying laserassisted vibrational excitation of reactant molecules, which deposits energy selectively into specific molecules and activate the molecules towards the selected reaction pathways. Laser-assisted metal organic chemical vapor deposition (LMOCVD) of GaN was studied using a wavelength-tunable CO2 laser. The NH-wagging modes (υ2) of ammonia (NH3) precursor molecules are strongly infrared active and perfectly match the emission line of the CO2 laser at 9.219, 10.350, and 10.719 μm. On- and off-resonance excitations of molecules were performed via tuning the incident laser wavelengths at on-resonant wavelength 9.219 μm …

Evaluation Of Nickel-Titanium Oxide-Niobium Pentoxide Metal Ceramic Composite As Interconnect For Solid Oxide Fuel Cell, Abhijith Budur

Masters Theses

"With increasing importance for clean energy, fuel cells have gained great significance in recent decades. Solid oxide fuel cells are easy to transport due to presence of solid electrolyte and also have requisite electrical properties,but have been obstructed by their limitation to be used at only temperatures greater than 600⁰C and less than 800⁰C. To construct a stack of cells, materials that are good electrical conductors and having necessary mechanical strengths at that temperatures are being considered as interconnects between the cells. Evaluation of Nickel-Titanium dioxide-Niobium pentoxide (NTN) as interconnect and comparison to Stainless Steel 441 alloy has been made …