Materials Science and Engineering Commons^™

An Extended Duration Operation For Solid Hollow Fiber Cooling Crystallization Method, Chi Jin

Theses

As recently demonstrated by Chen et al. [1], the solid hollow fiber cooling crystallization method to achieve continuous polymer coating/encapsulation of submicrometer particles, has advantages of no problem with high pressure, easy scale-up and production of free-flowing coated particles. There is a concern whether this crystallization method can be applied for an extended duration coating process; it was not investigated in the previous study. Therefore, in order to examine this problem, in this work, the duration of the whole crystallization coating process has been greatly extended from 5 min to 60 min and 120 min. For the purpose of being …

Computational Studies Of Electronic Structure Of Doped Graphene, Yan Chu

Theses

In the literature, extensive studies have been performed to study the electronic properties of doped graphene. This is due to the potentially large number of applications of graphene in p-n junctions, transistors, photodiodes and lasers. By utilizing single heteroatom chemical doping method or electric field-induced method, one can introduce a band gap, ranging from 0.1eV to 0.5eV, in graphene. A tunable bandgap is highly desirable because it would allow significant flexibility in the design and optimization of such devices, particularly if it could be tuned by adjusting the doping configurations. Here, we demonstrate the realization of a widely tunable electronic …

Modeling Of Electrical Behavior Of Graphene-Based Ultracapacitors, Patrick Dzisah

Theses

Graphene has been identified as a promising material for energy storage, especially for high performance ultracapacitors. Graphene-based ultracapacitors show high stability, significantly-improved capacitance and energy density with fast charging and discharging time at a high current density, due to enhanced ionic electrolyte accessibility in deeper regions. The surface area of a single graphene sheet is 2630 m2/g, substantially higher than values derived from Brunauer Emmett Teller (BET) surface area measurements of activated carbons used in the current electrochemical double layer capacitors.

In an ultracapacitor cell, chemically modified graphene (CMG) materials demonstrate high specific capacitances of 135 and 99 F/g in …

Design, Construction And Characterization Of A Wind Tunnel, Chang Ge

Theses

The wind tunnel is the most fundamental test equipment for aircraft testing and studying aerodynamics. Because of the complexity of the test-subject's geometry, it is difficult to study the aerodynamic pattern simply based on theoretical calculations. Most of the aerodynamics experiments still use wind tunnels. The progress of the wind tunnel is highly related to the advancements in air crafts. Aircraft manufacturing has pushed the wind tunnel technology forward. Wind tunnels can be categorized by the wind speed limit differences, which are controlled by the mechanism of the driving methods, structure applications, etc. In this case, we built a small …

Simulation Of Electronic And Optical Properties Of Graphene, Biao Leng

Theses

Graphene is a recently discovered two-dimensional crystal. Due to its excellent electronic properties, transport properties, optical properties, and many other features, it has tremendous potential for applications in many areas. This thesis discusses the structure and properties of graphene using several different models of graphene and carries out detailed theoretical studies and calculations of its electronic and optical properties. Using two modules of Materials Studio, CASTAP and Doml3, four graphene models have been constructed. Their electronic and optical properties have also been calculated via these two modules. By comparing the results of calculations with experimental results and the literature, the …

Processing And Characterization Of Graphene And Graphene On Silicon, Cheng Peng

Theses

Graphene has become a promising material for applications in many areas including electronic devices, batteries and space crafts. Although it has a bright future, the commercial production of graphene has not yet been realized. In this thesis, an overview of the properties and applications of graphene is presented. The early research of preparing graphene and its composites is summarized, which gives the basis to synthesize graphene and improve the process. In this study, graphene oxide (GO) and graphene have been successfully made using graphite; graphene layer has been coated on the surface of a silicon wafer. The resulting specimens are …

Design, Construction And Characterization Ofa Magnetic Augmented Rotation System (Mars) Based Wind Turbine, Da Li

Theses

Magnetic Augmented Rotation System (MARS) works by magnetic field coupling, to transfer torque from the driver to the rotor without contact. This characteristic has significant applications to the wind turbine but research in combination of MARS and wind turbine has not been done in the literature. In this thesis, a small-scale wind turbine is designed, built and characterized in a prototype wind tunnel. The test results are analyzed and computer-aided software simulation is used as an auxiliary method to understand the mechanism of MARS. The power coefficient of this new wind turbine is estimated to be about 40%. The “gear …

Ultracapacitors For Off Grid Wind Power Systems, Hans Tanis

Theses

The main reason for wind turbine to be not as prevalent as traditional power systems is because they do not have an effective storage capacity. However, researchers in material science and engineering have found ways to resolve this problem by developing “ultracapacitors” that store energy by assembling ions at the surface of a porous material. That is why ultracapacitors coupled with the energy storage battery could present a challenge to the electrical power grid. Such a design allows ultracapacitors to charge in matter of minutes and not hours. This innovation would create a significant impact on electronic items such as …

Bio-Medicinal Application For Plasma Electrolytic Oxidation Of Metals, Zunjian Yang

Theses

Plasma electrolytic oxidation (PEO), a novel method for forming ceramic coatings on metals, has been researched extensively in recent times. By applying high voltage between dielectric thin films, a plasma micro-arc is induced through penetration of breakdown in film boiling layer. Such a method takes advantage of high processing time, low equipment requirement and advanced coating performance.

Titanium alloys, Ti-6Al-4V and pure Titanium Grade 2, are two of most common Titanium alloys in daily use. Both of such Titanium alloys show great potential utilization in bio-medicinal application, especially in implants, for its excellent biocompatibility, high tensile strength, and high elastic …

Thermal Properties Of Graphene, Vishal Vijay Nakhate

Theses

The two-dimensional (2D) monolayer structure of carbon atoms were initially considered as unstable. The 2D materials have recently been discovered and many researchers have started analyzing these materials. Graphene, a two-dimensional allotrope of graphite with sp2 bonded carbon atoms, is arranged in honeycomb structure. Graphene has excellent thermal conductivity and can be considered as a potential material for applications in the electronics industry where heating of materials is a serious concern.

In this study, thermal properties of p and n doped graphene nanosheets and nanoribbons are studied as function of percentage composition of the dopants and the direction of dissipation …

Optical Properties Of Black Silicon - An Analysis, Suramya Sekhri

Theses

Silicon is the preeminent solar cell material of the day because it is the first semiconductor that was learned to commercialize and continues to be the principal semiconducting material used in photovoltaic technology for the manufacture of solar cells. Silicon, an indirect band gap semiconducting material, has a reflectance of about 30% in the visible range of wavelengths. Standard Silicon solar cells are not entirely useful in the infrared spectrum region. In order to enhance the performance of Silicon solar cells, reflectance losses must be minimized and absorption must be maximized. In the solar cell industry, anti-reflection (AR) coating is …

Capacitance Measurements Of Defects In Solar Cells: Checking The Model Assumptions, Justin R. Davis

Senior Theses

Capacitance measurements of solar cells are sensitive to minute changes in charge in the material. For that reason, capacitance is used in several methods to electrically characterize defects in the solar cell. Standard interpretations of capacitance rely on many assumptions, which, if wrong can skew the results. We explore possible alternative explanations for capacitance transitions, such as a non-ideal back contact and series resistance. Using Drive Level Capacitance Profiling measurements, a capacitance step is linked to a defect between the energy bands of a solar cell.

Predictive Modeling Of Oxygen Transmission Through Micro-Perforations For Packaging Applications, Ayman Abdellatief, Bruce A. Welt, Jason Butler, Eric Mclamore, Arthur Teixeira, Sanjay Shukla

Journal of Applied Packaging Research

Methods for creating precise perforations in respiring produce packaging are being increasingly adopted. Knowledge of oxygen transfer through perforated packaging and oxygen distribution in packages is necessary for successful packaging design of fresh produce. An approach to modeling perforated packaging performance was developed using a cylindrical chamber with precision perforations using Fick’s second law. The model was simulated using two techniques including Finite Element Method (FEM) using commercially available software and Finite Volume Method (FVM) through programming. Perforations were approximated as a source term in the second method. Both simulation techniques showed trends similar to experimental data.

Constant Interface Temperature Reliability Assessment Method: An Alternative Method For Testing Thermal Interface Material In Products, Christian Amoah-Kusi

Dissertations and Theses

As electronic packages and their thermal solutions become more complex the reliability margins in the thermal solutions diminish and become less tolerant to errors in reliability predictions. The current method of thermally stress testing thermal solutions can be over or under predicting end of life thermal performance. Benefits of accurate testing and modeling are improved silicon yield in manufacturing, improved performance, lower cost thermal solutions, and shortened test times.

The current method of thermally stress testing is to place the entire unit in an elevated isothermal temperature and periodically measure thermal performance. Isothermally aging is not an accurate representation of …

Measuring Strain In Trusses, Spencer Metzsch

Senior Theses

Strain is an important quantity in engineering design and materials science that relates the deformation of a material to its original length, through a percentage. Different materials exhibit particular qualities under loading, for example the amount of strain due to a certain magnitude of force, or the amount of strain that can be borne before failure. This experiment aims to compare the relative strengths of three common truss configurations by measuring the strain in their members under loading. The Queen’s post truss was found to be the best at minimizing strain under similar loading conditions.

Photocatalytic Mineralization Of Phenol On Fluidized Titanium Oxide-Coated Silica Gel, Guillermo J. Rincon

LSU New Orleans Theses and Dissertations

A bench-scale tubular reactor with recirculation was built in order to study the efficiency of the photocatalytic oxidation of phenol on fluidized titanium oxide-coated silica gel beads. A UV-C lamp placed along the central vertical axes of the reactor was used as source of photons. A bed of silica gel beads was fluidized by means of fluid recirculation and forced to follow upward helical flow around the lamp. Anatase was successfully synthetized on silica gel particles of average diameters 224, 357 and 461 µm, as confirmed by scanning electron micrographs, through a sol-gel technique using a titanium (iv)isopropoxide / hydrochloric …

Synthesis, Characteristics, And Material Properties Dataset Of Bi:Dyig-Oxide Garnet-Type Nanocomposites, M Nur-E-Alam, Mikhail Vasiliev, Kamal Alameh

Research outputs 2014 to 2021

The fabrication, annealing crystallization processes, and material properties of (Bi,Dy)3(Fe,Ga)5O12:Bi2O3 nanocomposites are investigated and summarized. The stoichiometry of these nanocomposites is optimized for magnetooptic applications using the approach of stoichiometry adjustment (implemented by means of varying RF power densities applied to the sputtering targets used to prepare the nanocomposite thin films). The crystallization processes for all developed batches of as-deposited films are carried out by annealing runs at different temperatures and process durations. This paper describes the methodologies used to optimize the compositions (by calculating the volumetric fractions of excess bismuth oxide to be mixed with the garnet-stoichiometry species during …

On The Fe Enrichment During Anodic Polarization Of Mg And Its Impact On Hydrogen Evolution, D. Lysne, S. Thomas, M. F. Hurley, N. Birbilis

Materials Science and Engineering Faculty Publications and Presentations

Iron (Fe) is an unintentional impurity present in pure magnesium (Mg) and Mg alloys, albeit nominally in low and innocuous concentrations (< 100 ppmw). Since Fe, like most metals, is more noble than Mg, the presence of Fe impurities can serve as cathodic sites within the Mg matrix. During anodic polarization of Mg, incongruent dissolution can lead to undissolved Fe impurities accumulating upon the Mg surface, permitting an increase in the overall rate of hydrogen evolution. The experimental manifestation of the incongruent dissolution of Mg, has not yet been clarified, wherein, the extent and efficiency of Fe enrichment during anodic polarization is not known, and also the increase in the hydrogen evolution rate due to Fe enrichment has not been quantified. In this work, Mg specimens with Fe concentration between 40 to 13,000 ppmw were examined in 0.1 M NaCl to obtain a quantitative relation between the Fe concentration and the rate of cathodic hydrogen evolution. These base-line alloys were then anodically polarized to facilitate surface Fe enrichment, and subsequently again cathodically polarized to determine the impact of prior dissolution and Fe enrichment on the subsequent hydrogen evolution. A simple model to predict Fe enrichment was used to analyze the electrochemical data and predict the extent and efficiency of Fe enrichment.

Three-Dimensional Printing Of Graphene-Based Composite Aerogels, Chen Zhu

Composites at Lake Louise (CALL 2015)

Graphene-based composite materials have found wide applications in nanoelectronics, sensors, catalysis, energy storage, and biomedicine areas for their unique combination of low density, exceptional mechanical properties, large surface area, and excellent electrical conductivity. Recent progress has produced bulk 3D assemblies of graphene, such as graphene aerogels, by the self-assembly or gelation of the graphene oxide (GO) suspension via hydrothermal reduction, chemical reduction, or direct crosslinking of the GO sheets. Other templating methods like chemical vapor deposition (CVD) coatings and freeze-casting have already been employed to control over the pore morphology of 3D graphene monoliths. However, the architecture of these graphene …

Feasibility Study: The Evaluation Of Polymer Coatings To Prevent Weathering Of Weak Rocks, Lauren Distler

Senior Honors Projects, 2010-2019

The weathering and erosion of weak rocks along roadways can cause dangerous and potentially fatal rockfalls.   Various slope stabilization methods exist, but each presents a set of challenges and trade-offs.   The focus of the project is to understand the feasibility of utilizing of a polymerbased slope stabilization technique. Rock samples were collected along US Route 33 in Virginia and West Virginia, and preliminary tests were conducted to evaluate the absorption of water (% mass) and durability. The study evaluates three polymer options in regard to the following criteria: adhesion to rock, layer thickness, semi-permeability, insolubility, and non-toxicity. The polymer selection …