Materials Science and Engineering Commons^™

Prediction Of Shear Strength And Ductility Of Cyclically Loaded Reinforced Concrete Columns Using Artificial Intelligence, Nicholas Gordon

UNLV Theses, Dissertations, Professional Papers, and Capstones

The shear strength and deformation capacities of reinforced concrete (RC) columns are governed by a multitude of variables related to material properties of the steel and concrete used in the design and construction of the columns. Predicting performance of RC columns using design variables is a complex, non-linear problem. The prediction of shear strength and ductility for these types of structural members has historically been performed using empirically or semi-empirically derived formulae based on experimental results. The introduction of cyclical lateral loading, such as the forces imposed on a structure during an earthquake, can result in severe degradation of shear …

Properties Of Concrete Containing Ggbf Slag And Nano-Silica, Mohammad Sajjadul Islam

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ground granulated blast furnace slag (GGBFS), a by-product from steel production, has been used as a partial replacement of portland cement in concrete for over a century. It constitutes a beneficial reuse of a by-product material, less consumption of portland cement concrete. Lower consumption of portland cement concrete can help reduce construction cost. Furthermore, it lowers the industrial carbon footprint, and landfill disposal which is a major environmental issue the world is facing today. The chemical composition of GGBF slag is similar to portland cement with hydraulic properties and additional pozzolanic properties with excellent alkali silica reactivity mitigation and resistance …

High Pressure Behavior Of Mullite-Type Oxides: Phase Transitions, Amorphization, Negative Linear Compressibility And Microstructural Implications, Patricia Kalita

UNLV Theses, Dissertations, Professional Papers, and Capstones

Even though mullite occurs rarely in nature, it is perhaps one of the most important phases in both traditional and advanced ceramics. Existing and emerging applications of mullite and mullite-type materials include: high-temperature composites, aerospace materials, ballistic shielding for military applications and even non-linear optical materials. There are many uncertainties regarding the basic physical properties of mullite-type materials, particularly in terms of their high-pressure structural stability and mechanical behavior that are important to address for emerging applications of mullites as engineering materials. This work is the first reported comprehensive investigation of the high –pressure structural behavior of several different mullites …

Characterization Of Silicon Phosphorus Alloy For Device Applications, Larry C. Cousar

Graduate Theses and Dissertations

A new material of highly-phosphorus doped silicon for device applications was characterized and analyzed for new material properties. Devices such as NMOS transistors and other CMOS compatible devices may benefit from new materials that reduce external resistances and increase drive currents.

Material characterization requires numerous techniques and technologies to determine electrical, optical, and physical characteristics. For this work, Hall measurement, X-ray Diffraction, Raman Spectroscopy, Photoluminescence Characterization, and Spectroscopic Ellipsometry were used to better understand this new material. The results may lead to new models for silicon phosphorus alloys.

Large-Scale Graphene Film Deposition For Monolithic Device Fabrication, Khaled Al-Shurman

Graduate Theses and Dissertations

Since 1958, the concept of integrated circuit (IC) has achieved great technological developments and helped in shrinking electronic devices. Nowadays, an IC consists of more than a million of compacted transistors.

The majority of current ICs use silicon as a semiconductor material. According to Moore's law, the number of transistors built-in on a microchip can be double every two years. However, silicon device manufacturing reaches its physical limits. To explain, there is a new trend to shrinking circuitry to seven nanometers where a lot of unknown quantum effects such as tunneling effect can not be controlled. Hence, there is an …

Generalized Ellipsometry Analysis Of Anisotropic Nanoporous Media: Polymer-Infiltrated Nanocolumnar And Inverse-Column Polymeric Films, Dan Liang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Characterization of the structural and optical properties is a subject of significance for nanoporous material research. However, it remains a challenge to find non-destructive methods for investigating the anisotropy of porous thin films with three-dimensional nanostructures. In this thesis, a generalized ellipsometry (GE) analysis approach is employed to study two types of anisotropic nanoporous media: slanted columnar thin films (SCTFs) with polymer infiltration and inverse-SCTF polymeric films. The thesis presents the physical properties obtained from GE analysis, including porosity, columnar shape, principal optical constants, birefringence, etc.

The thesis reports on using a GE analysis approach, combining the homogeneous biaxial layer …

Surface-Enhanced Raman Spectroscopy-Based Biomarker Detection For B-Cell Malignancies, Nathan Israelsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

B-cells are responsible for the production of antibodies and the recognition of dangerous pathogens. When B-cells become cancerous, they no longer perform these vital functions. This reduced B-cell activity results in greater susceptibility to opportunistic infections and increasing health risks. To effectively care for different cancer subtypes, targeted diagnosis and treatment is required. To determine the specific B-cell cancer type, up to twenty different cancer biomarkers on the cell surface need to be detected at the same time. Traditional methods are not capable of detecting such a large number of biomarkers simultaneously. This paper presents the design of a system …

Preparation And Characterization Of Copper-Doped And Silver-Doped Titanium Dioxide Nano-Catalysts For Photocatalytic Applications, Haya Abdel Ra'ouf Ahmed

Theses

The goal of this work was to improve the performance of TiO₂ nanomaterials by increasing their optical activities by shifting the onset of the response from the UV to the visible-light region. Among the several ways to achieve this goal, doping TiO₂ nanomaterials with other elements (e.g. metals) was selected to narrow the band gap and enhance the optical properties of TiO₂ nanomaterials. In this work, we have prepared Cu-doped TiO₂ nano-catalysts, characterized them and studied their properties, and the optical ones in particular. The Ag-doped TiO₂ catalyst was prepared by the sol-gel method while …

Recent Research Progress For Non-Pt-Based Oxygen Reduction Reaction Electrocatalysts In Fuel Cell, Ping Song, Ming-Bo Ruan, Jing Liu, Guang-Jun Ran, Wei-Lin Xu

Journal of Electrochemistry

The expensive Pt-based catalyst suffers from its susceptibility to time-dependent drift, methanol crossover, and carbon monoxide (CO) deactivation, which will block the large-scale commercial application of fuel cells. It is, therefore, necessary to develop efficient, low-cost, highly stable non-precious metal oxygen reduction reaction (ORR) catalysts with high catalytic performance. Here, we will pay attention to the research progress of non-precious metal and heteroatom-doped (N, B, P, S, F) metal-free ORR catalysts. Importantly, we mainly focus on the work developed by Xu’s group with the Fe-based non-precious metal and F/NF-doped metal-free ORR catalysts. The purpose of these works is to improve …

Research Progress Of Mn-Based Lithium-Rich Cathode Materials For Li-Ion Batteries, Luo-Zeng Zhou, Qun-Jie Xu, Wei-Ping Tang, Xue Jin, Xiao-Lei Yuan

Journal of Electrochemistry

With rapid development of new energy industry like electric vehicles and energy storage station, these fields highly demand the next generation of high performance Li-ion battery systems with stronger energy density, higher power density, and longer cycling life. Lithium-rich Mn-based cathode materials, xLi₂MnO₃·(1-x)LiMO₂(M=Mn, Co, Ni...), have become the hot topic and drawn attentions of scholars worldwide because of their high reversible capacity exceeding 240 mAh·g^-1, excellent electrochemical properties, and low cost, which makes them most promising cathode material candidates for next Li-ion battery system. The cathode material Li[Li_0.2Mn_0.54Ni …

Preparation And Properties Of Binary Oxides CoXCr1-XO3/2 Electrocatalysts For Oxygen Evolution Reaction, Tai-Lai Yang, Wen-Yan Dong, Hui-Min Yang, Li Zhang, Zhen-Hai Liang

Journal of Electrochemistry

Binary metal mixed oxides of Co and Cr with nominal compositional formulas, Co_xCr_1-xO_3/2 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0), were obtained by thermal decomposition method. The morphologies, crystal forms and valence states of the catalyst powders were analyzed by SEM, XRD and XPS, respectively. And the electrochemical properties, overpotentials and stabilities of Co_xCr_1-xO_3/2 electrodes for oxygen evolution reaction (OER) in an alkaline solution were evaluated by linear sweep voltammetry (LSV), staircase voltammetry and chronoamperometry, respectively. The results indicated that the mixtures of Co₃O₄ and eskolaite-Cr_{2 …}

Synthesis And Electrochemical Properties Of Cnts/V2O5 Hollow Microspheres, Liang Hao, Lai-Fa Shen, Jie Wang, Jia-Jia Zhu, Xiao-Chen Zhao, Xiao-Gang Zhang

Journal of Electrochemistry

The carbon nanotubes/vanadium oxides (CNTs/V₂O₅) hollow microspheres (VOC) were prepared via solvothermal process. The effects of the ratio for CNTs to V₂O₅ on the morphologies, structures and electrochemical performances were systemically investigated. The results indicate that CNTs dramatically enhanced the rate performances of VOC composite electrodes. When the ratio of CNTs is 7.1%, the VOC composite electrode exhibited the best electrochemical performance, which delivered a specific capacitance of 346 F·g^-1 at 0.5 A·g^-1 and maintained 75% at 8 A·g^-1 in 5 mol L^-1 LiNO₃. A hybrid capacitor …

Electrochemical Performance Of Coal2O4-Coated Lini1/3Co1/3Mn1/3O2, Ji-Jun Cai, Wang-Jun Cui, Bing Li, Yang-Yang Yu, Jin-Bao Zhao

Journal of Electrochemistry

A method to improve the electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ for high voltage lithium-ion battery by CoAl₂O₄ coating was present in this work. The effects of CoAl₂O₄ coatings on the structure and electrochemical properties of LiNi1/3Co1/3Mn1/3O2 were investigated in detail. The results show that CoAl₂O₄ forms a thin layer of 8 nm on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ without destroying the structure of the core material. The CoAl₂O₄-coated LiNi_1/3Co_1/3Mn_1/3O …

Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang

Journal of Electrochemistry

In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.

Electrodeposition Of Al-Mg Alloys From Acidic Alcl3-Emic-Mgcl2 Room Temperature Ionic Liquids, Rostomali M., P. Abbott Andrew, S. Ryder Karl

Journal of Electrochemistry

Electrodeposition of aluminium-magnesium alloys have been carried out onto platinum and copper cathodes from Lewis acidic aluminium(III) chloride-1-ethyl-3-methylimidazolium chloride ionic liquid containing magnesium(II) chloride by constant current and constant potential methods at room temperature. Magnesium content in the deposited alloy increases with increasing MgCl₂ concentration in the ionic liquid and with increasing cathodic current density. The influences of various experimental conditions on electrodeposition and the morphology of the electrodeposited layers have been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDAX). On increasing the deposition current densities the dense, bright, adherent …

Syntheses And Electrochemical Performances Of Li4Ti5O12 Anode Materials For Lithium Ion Battery, Yong-Long Zhang, Xue-Bu Hu, Yao-Qiong Wang, Dong-Hai Huang

Journal of Electrochemistry

Series of spinel lithium titanate (Li₄Ti₅O₁₂) materials were synthesized by one-step solid-state reaction using lithium acetate and TiO₂ as raw materials under different temperatures (750/800/850 °C) and atmospheres (N₂/air). The as-prepared Li₄Ti₅O₁₂ materials were investigated by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, cyclic voltammotry and charge-discharge test to analyze their crystal structures, microstructures and electrochemical performances. The results show that the Li₄Ti₅O₁₂（L-800N）material obtained at 800 °C under nitrogen atmosphere exhibited better electrochemical performance and smaller particle size. The initial …

A Platinum-Hydrogen Reference Micro-Electrode For All Vanadium Redox Flow Battery, Zhi-Bin Lin, Yan-Qing Dong, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

A platinum-hydrogen reference micro-electrode was made with electroplating Pd on the surface of Pt wire and then coating anion membrane material. This reference electrode was built-in the porous electrode of the all vanadium redox flow batteries (VRFB), and monitored the charging /discharging and self-discharging of the VRFB. The results indicated that the capacity fading of VRFB occurred due to the graduate reduction of V(IV) active species in the electrolyte and the accumulation of V(V) in the positive electrode, leading to nonequilibrium of active species between the positive and negative electrodes.

Researches On In-Situ And Ex-Situ Characterization Techniques In Lithium Batteries, Wen-Jun Li, Jie-Yun Zheng, Lin Gu, Hong Li

Journal of Electrochemistry

Electrochemical performance of Lithium batteries is directly linked to interfacial transports, reactions and storing behaviors of electrons and ions at bulk-surface interfaces. It is extremely important to conduct evolution studies from atomic level to macro level in electron structures, crystal structures, microstructures and morphologies, chemical compositions and physical properties of battery materials at equilibrium and nonequilibrium in order to understand various structure-performance relations in lithium ion batteries. Advanced in-situ and ex-situ characterization techniques have been used widely to clarify scientific and technological problems in lithium batteries. This paper summarizes our efforts on battery researches using various experimental techniques, including in …

Electrochemical Conversion Reactions And Their Applications For Rechargeable Batteries, Ting Li, Han-Xi Yang

Journal of Electrochemistry

Electrochemical conversion reactions have received considerable interest as a new redox mechanism for constructing high capacity electrodes of rechargeable batteries. Without strict restrictions on the crystalline structure of the host lattice and the size of the associated ions, conversion reactions can take place in a variety of different metal compounds with different metal cations and deliver much higher reversible capacities through full utilization of all the oxidation states of the transition-metal compounds, opening up a new avenue for developing high capacity materials of rechargeable batteries. This paper briefly reviews the state of the art and challenges of conversion electrodes and …

Microstructure And Phase Analysis In Mn–Al And Zr–Co Permanent Magnets, Michael J. Lucis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In America’s search for energy independence, the development of rare-earth free permanent magnets is one hurdle that still stands in the way. Permanent magnet motors provide a higher efficiency than induction motors in applications such as hybrid vehicles and wind turbines. This thesis investigates the ability of two materials, Mn-Al and Zr-Co, to fill this need for a permanent magnet material whose components are readily available within the U.S. and whose supply chain is more stable than that of the rare-earth materials. This thesis focuses on the creation and optimization of these two materials to later be used as the …