Materials Science and Engineering Commons^™

Performance Enhancement And Prediction Of Composite Materials With Embedded Electrospun Piezoelectric Sensors, Rahman Jani Mazed, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Md Riaz Uddin Ahmed, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

In today’s world, continuous fiber reinforced composite materials are extensively used in the aerospace, automotive and other structural industries. Since the applications of such fibers demand for a high safety rating, it is of utmost importance for engineers who design such materials to analyze its safety. When cracks are developed in such materials, the mechanical, electrical, and thermal properties also get altered as a function of the cracks. Previous studies have shown that changes in electrical properties can be directly correlated with the development of cracks in the material which can then be used to predict the remaining life of …

Fabrication, Characterization And Applications Of Highly Conductive Wet-Spun Pedot:Pss Fibers, Ruben Sarabia Riquelme

Theses and Dissertations--Chemical and Materials Engineering

Smart electronic textiles cross conventional uses to include functionalities such as light emission, health monitoring, climate control, sensing, storage and conversion of energy, etc. New fibers and yarns that are electrically conductive and mechanically robust are needed as fundamental building blocks for these next generation textiles.

Conjugated polymers are promising candidates in the field of electronic textiles because they are made of earth-abundant, inexpensive elements, have good mechanical properties and flexibility, and can be processed using low-cost large-scale solution processing methods. Currently, the main method to fabricate electrically conductive fibers or yarns from conjugated polymers is the deposition of the …

Ab Initio Investigation On The Surface Chemistry Of Functionalized Titania Membranes, Evan Hyde

Theses and Dissertations--Chemical and Materials Engineering

Titania (titanium dioxide) is a metal oxide which has recently been investigated as a photocatalyst, most commonly for use in hydrolysis, which absorbs mostly in the UV range. However, the range of absorption can be shifted to fall within the visible light range either by doping or by functionalizing the surface with atomic or molecular adsorbates. Over the course of this research, a series of Density Functional Theory (DFT) calculations are performed to ascertain the effects of these different methods on the photocatalytic performance of titania. While the effects of nitrogen doping and oxygen vacancies are well known, more recent …

Electrophoresis In Heterogeneous Hydrogels And Applications In Surface Patterning, Ning Ge

Theses and Dissertations--Mechanical and Aerospace Engineering

The creation of chemical micropatterns on surfaces makes it possible to add unique chemical functionality to surfaces, modifying properties such as wettability, or even adding the ability to selectively bind other molecules. The creation of biochemical surface patterning in particular is useful in a variety of fields including tissue engineering and highthroughput drug screening. There are many existing surface patterning techniques which focus on precise control over the patterned geometry, even down to submicron scale features, but they do not allow local control over chemical concentration. So the results are high resolution patterns with binary concentration. There are also existing …

Stress Generation In Ni50.3Ti29.7Hf20 Shape Memory Alloys, Utsav Shah

Theses and Dissertations--Mechanical and Aerospace Engineering

Shape memory alloys such as NiTiHf and NiTi have the ability to generate large recovery stresses when they are constrained after pre-straining and then heated above their Austenite Finish Temperature (A_f). In this work Ni_49.9Ti_50.1 (at.%), the most well-known SMA with impressive shape memory properties but limited temperature range and Ni_50.3Ti_29.7Hf₂₀, a promising high temperature shape memory alloy, were characterized to reveal their stress generation capabilities. The effects of pre-straining on stress generation were investigated via martensite reorientation method of NiTi and NiTiHf alloys by loading the samples till …

Capillary Flow Of Liquid Aluminum Alloy In Wetting And Wetting/Non-Wetting Systems, Yangyang Wu

Theses and Dissertations--Mechanical and Aerospace Engineering

In this dissertation, the capillary flow of liquid aluminum alloy in both wetting and wetting/non-wetting systems is investigated.

The impact of gravity and surface topography on the capillary flow has been studied in a wetting/non-wetting assembly (an AA3003/Al₂O₃ wedge-tee configuration). The research includes (i) kinetics of liquid Al-Si-K_xAl_yF_z alloy triple line movements and dynamic macro advancing and receding contact angles and (ii) free surface profiles of the molten alloy driven by surface tension and impacted by gravity. A trade-off between the surface tension and gravity force has been found by calculating the …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Additive Manufacturing Of Engineered Material Systems For Energy Applications, Luis Angel Chavez

Open Access Theses & Dissertations

Despite increasing efforts to use renewable electricity generation techniques in the last couple of decades, the world is still heavily reliant on traditional power generation techniques. This creates the need to make such systems cheaper and less pollutant through improvements to their efficiency. Increasing the efficiency and reliability of energy conversion systems, specially those based on combustion processes has been of interest for many years. However, material limitations have brought these systems to a stagnant condition.

A novel approach to help increase the efficiency of such systems is to closely monitor their operating conditions and therefore be able to increase …

Non-Linear Inverse Liquid-Solid Chromatography As A Methodology To Characterize Drug Concentration Losses To Polymeric Materials Used In Body-On-A-Chip Devices For Drug Discovery, Mark Schnepper

Electronic Theses and Dissertations, 2020-2023

Body-on-a-chip and human-on-a-chip systems are currently being used to augment and could eventually replace animal models in drug discovery and basic biological research. However, hydrophobic molecules, especially therapeutic compounds, tend to adsorb to the polymer materials used to create these microfluidic platforms, which may distort the dose-response curves that feed into Pharmacokinetic/Pharmacodynamic (PK/PD) models which translate preclinical data into predictions of clinical outcomes. Adsorption of hydrophobic molecules to these polymer materials needs better characterization. Inverse Liquid-Solid Chromatography paired with a numerical optimization based on the Langmuir model of adsorption was used to characterize the adsorption isotherm parameters of selected drugs …

Development Of Facile Microfabrication Technologies For The Fabrication And Characterization Of Multimodal Impedimetric, Plasmonic, And Electrophysiological Biosensors, Cacie Hart

Electronic Theses and Dissertations, 2020-2023

The objective of this dissertation was to develop novel methods of patterning inorganic and organic materials, develop biocompatibility evaluations, and subsequently apply these methods toward developing biosensors and lab-on-a-chip devices, such as Interdigitated Electrodes (IDEs) and Microelectrode Arrays (MEAs) on non-traditional (such as nanostructured and plasmonic) polymer substrates or deploy these methods to enhance precision cellular placement on traditional (glass) MEA substrates. It was hypothesized that a combination of such facile microfabrication techniques and patterning technologies on traditional and non-traditional substrates would increase the sensitivity and selectivity of such sensor platforms by several orders of magnitude, and potentially introduce new …

The Effects Of Carbon Equivalent, Return Ratios, Mold Preparation, Riser Feed And Casting Temperature On The Microstructural And Mechanical Properties Of 100-70-03 Pearlitic Ductile Iron, Erin Vandusen

Dissertations, Master's Theses and Master's Reports

The most common and costly detriments to ductile iron foundries are casting defects, particularly in new and complex components. The ability to understand the factors and processes that create microstructures and the associated properties would allow accurate virtual predictions of casting outcomes. An experimental study of standard foundry variables, carbon equivalent, return ratio, mold preparation, riser feed, and casting temperature on a target of 100-70-03 pearlitic, hypereutectic ductile iron provided the groundwork for an ICME database. Density decreased when the fraction of graphite nodules was greater due to the low density of graphite. A greater percentage of return scrap and …

Diffusion Of Fission Products In Nuclear Graphite, Kevin Graydon

Electronic Theses and Dissertations, 2020-2023

The next generation of nuclear reactors (Generation IV) are specified to use graphite as the choice material for neutron moderation and structural components. For this reason, study of diffusion behavior of the fission product, ruthenium (Ru), in the candidate graphite grades, POCO AXF-5Q & ZXF-5Q, IG-110, NBG-18 and PCEA, is necessary. Diffusion data for Ru in these grades is absent due to the lack of prior studies and this work aims to fill this void and begin the study of this metallic fission product's diffusion behavior. By utilizing physical vapor deposition (PVD), dynamic secondary ion mass spectroscopy (SIMS), and the …

Understanding Solidification Behavior Of Selected Aluminum And Magnesium Alloys Additively Manufactured By Laser Powder Bed Fusion, Holden Hyer

Electronic Theses and Dissertations, 2020-2023

Additive manufacturing (AM), also known as 3D printing, has demonstrated the ability to produce customized, complex engineering components from metallic alloys, not previously possible with traditional techniques such as subtractive machining of cast alloys. However, many desired lightweight metallic alloys such as high strength aluminum (Al) and magnesium (Mg) alloys, cannot be processed dense with AM due to the consequence of solidification cracking. Thus, a large knowledge gap remains in assessing already existing, and genesis of new alloys that can be processed dense by AM, without solidification cracking. The present work investigates the AM processing and solidification behavior of selected …

Enhancement Of Absorptance By Ultrafast Laser Pulse Shaping For Efficient Laser Processing Of Thin Polymers, Arifur Rahaman

Electronic Theses and Dissertations, 2020-2023

Ultrashort-pulsed lasers have been used for high precision processing of a wide range of materials including dielectrics, semiconductors, metals, and polymers/polymer composites, enabling numerous applications ranging from micromachining, photonics to life sciences. However, there are challenges when applying this technology in the industry, which requires scale and throughput different from lab use. The goal of this research is to understand how ultrafast laser pulses interact with thin polymers/polymer composite materials and develop a method that is efficient for ultrafast laser processing of these materials. It is a common practice in industrial applications to run the laser at a high repetition …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Magnetism In Γ-Fesi2 Nanostructures: A First Principles Study, Sahil Dhoka

Dissertations, Master's Theses and Master's Reports

First-principles calculations are performed on γ-FeSi₂ nanostructures grown on Si (111) and (001) substrate. An attempt to explain the origin of emergent magnetic properties of the metastable gamma phase of iron di-silicide (γ-FeSi₂) is made, which show ferromagnetic behavior on nanoscale, unlike its possible bulk form. Many papers try to explain this magnetism from factors like bulk, epitaxial strain, interface, surface, edges, and corners but doesn’t provide an analytical study for these explanations. Density functional theory is used to analyze the magnetic effects of these factors. The results for the epitaxial structures show no magnetic behavior for …

Multiscale Modeling Of Carbon Fibers/Graphene Nanoplatelets/Epoxy Hybrid Composites For Aerospace Applications, Hashim Al Mahmud

Dissertations, Master's Theses and Master's Reports

Significant research effort has been dedicated for decades to improve the mechanical properties of aerospace polymer-based composite materials. Lightweight epoxy-based composite materials have increasingly replaced the comparatively heavy and expensive metal alloys used in aeronautical and aerospace structural components. In particular, carbon fibers (CF)/graphene nanoplatelets (GNP)/epoxy hybrid composites can be used for this purpose owing to their high specific stiffness and strength. Therefore, this work has been completed to design, predict, and optimize the effective mechanical properties of CF/GNP/epoxy composite materials at different length scales using a multiscale modeling approach. The work-flow of modeling involves a first step of using …

Effect Of Cerium And Magnesium Additions On The Strength And Morphology Of The Intermetallic Compound Layers In Aluminum-Steel Dissimilar Castings, Matt Thomas

Dissertations, Master's Theses and Master's Reports

Dissimilar castings are under investigation due to their light-weighting opportunities within the automotive industry. In this case, dissimilar castings consist of a solid steel core and a poured aluminum component. The strength and integrity of the casting relies on the coherency of the bond between the two components; by optimizing the metallurgical component of the bonding phenomena, the weight and complexity of the insert can be reduced, further increasing the light-weighting opportunities. An interface comprised of intermetallics, generally Fe₄Al₁₃ and Fe₂Al₅, forms between the two components with the latter forming nearest the steel. …

Effects Of Oxygen Modification On The Structural And Magnetic Properties Of Highly Epitaxial La0.7sr0.3mno3 (Lsmo) Thin Films, Shalini Kumari, Navid Mottaghi, Chih-Yeh Huang, Robbyn Trappen, Ghadendra Bhandari, Saeed Yousefi, Guerau Cabrera, Mohindar S. Seehra, Mikel B. Holcomb

Faculty & Staff Scholarship

La0.7Sr0.3MnO3, a strong semi-metallic ferromagnet having robust spin polarization and magnetic transition temperature (TC) well above 300 K, has attracted significant attention as a possible candidate for a wide range of memory, spintronic, and multifunctional devices. Since varying the oxygen partial pressure during growth is likely to change the structural and other physical functionalities of La0.7Sr0.3MnO3 (LSMO) films, here we report detailed investigations on structure, along with magnetic behavior of LSMO films with same thickness (~30 nm) but synthesized at various oxygen partial pressures: 10, 30, 50, 100, 150, 200 and 250 mTorr. The observation of only ( …

การสังเคราะห์โบรอนคาร์ไบด์จากรังไหมและกรดบอริก, กานต์ชนก ภูผาทอง

Chulalongkorn University Theses and Dissertations (Chula ETD)

โบรอนคาร์ไบด์เป็นวัสดุที่ได้รับความสนใจอย่างแพร่หลาย เนื่องจากมีความแข็งสูงประกอบกับมีสมบัติเชิงกลและทางกายภาพที่เป็นเลิศ จึงถูกนำไปใช้งานที่ต้องการความทนทานในสภาวะพิเศษหลากหลายด้าน ในงานวิจัยนี้ ผู้วิจัยได้มีความพยายามที่จะสังเคราะห์โบรอนคาร์ไบด์ที่อุณหภูมิต่ำ จากรังไหมและกรดบอริก เนื่องจากรังไหมมีหมู่ฟังก์ชันไฮดรอกซิลภายในโครงสร้าง สามารถสร้างพันธะ B-O-C ระหว่างกระบวนการเตรียมสารผสมตั้งต้นร่วมกับกรดบอริก รังไหมจะถูกจุ่มแช่ในสารละลายกรดบอริก จากนั้นนำไปสังเคราะห์โดยผ่านหรือไม่ผ่านขั้นตอนแคลไซน์ ผลิตภัณฑ์จากการสังเคราะห์ได้ถูกนำมาตรวจสอบองค์ประกอบเฟสด้วยเทคนิคการเลี้ยวเบนของรังสีเอ็กซ์ จากการทดลองปรับเปลี่ยนตัวแปรต่างๆในกระบวนการ พบว่า การจุ่มแช่รังไหม 1 กรัม ในสารละลายที่เตรียมกรดบอริก 2 และ 4 กรัม ในน้ำปราศจากไอออน 150 มิลลิลิตร เป็นเวลา 4 ชั่วโมง ณ อุณหภูมิห้อง เมื่อผ่านการอบและสังเคราะห์ที่อุณหภูมิ 1450 องศาเซลเซียส เป็นเวลา 5 ชั่วโมง ในบรรยากาศก๊าซอาร์กอน องค์ประกอบเฟสของผลิตภัณฑ์ประกอบด้วยโบรอนคาร์ไบด์ โดยมีคาร์บอนปรากฏเป็นเฟสหลักอยู่ในระบบ เมื่อลดอุณหภูมิการสังเคราะห์เป็น 1350 องศาเซลเซียส ไม่พบโบรอนคาร์ไบด์ในองค์ประกอบเฟสของผลิตภัณฑ์ นอกจากนี้ เมื่อนำกระบวนการไฮโดรเทอร์มัลที่ 180 องศาเซลเซียส 4 ชั่วโมง มาใช้ร่วมในการสังเคราะห์ พบว่าไม่สามารถพัฒนาการเกิดเฟสโบรอนคาร์ไบด์ให้เพิ่มขึ้น อย่างไรก็ตาม งานวิจัยในส่วนนี้ยังคงต้องการการศึกษาทดลองเพิ่มเติมเพื่อยืนยันผล