Materials Science and Engineering Commons^™

Enhanced Gas Barrier Properties Of Graphene Oxide/Rubber Composites With Strong Interfaces Constructed By Graphene Oxide And Sulfur, Long Zheng, Stephen Jerrams, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Constructing strong interfacial interactions and complex filler networks is crucial to establishing high gas barrier properties in rubber composites. In this research, sulfur-graphene oxide (S-GO) hybrids were prepared by in situ growth of sulfur on the surfaces of GO sheets. The S-GO hybrids were also introduced into butadiene styrene rubber (SBR) using a green method of latex compounding. Results showed that sulfur could melt and spread on the surface of the GO during the crosslinking process at high temperatures. This process prevented the aggregation of GO and resulted in a fine dispersion of GO and complex filler networks in S-GO/SBR …

Lateral Bracing Of Beams Provided By Standing Seam Roof System: Concepts And Case Study, Gengrui Wei, Benjamin Schafer, Michael Seek, Matthew Eatherton

Engineering Technology Faculty Publications

The standing seam roof (SSR) system is the most commonly used roof system for metal buildings due to its superior durability, water tightness, and energy efficiency. In this type of system, SSR panels attach to Z-shaped or C-shaped purlins with clips, and the purlins are in turn connected to rafters (i.e. roof beams). For the design of metal building rafters against lateral torsional buckling, bottom flange braces provide torsional bracing to the rafter and the SSR system provides some lateral bracing. However, the degree to which the SSR system can restrain the rafter against lateral movement has not previously been …

Tensile-Strained Self-Assembly: Tunable Nanomaterials For Infrared Optoelectronics And Quantum Optics, Paul Simmonds

Materials Science and Engineering Faculty Publications and Presentations

Discovered recently, tensile-strained quantum dots are optically active, defect-free nanostructures. Large tensile strains allow us to tailor band structures for applications from tunable infrared emitters to entangled photon sources. I will discuss the history, current state-of-the-art, and future directions of this rapidly expanding research field.

Two-Dimensional Nanomaterials And Their Composites For Electrochemical Detection Of Toxic Mercury Ions In Water, Md Tawabur Rahman

Electronic Theses and Dissertations

The presence of trace amounts of mercury ion (Hg²⁺) in drinking water has a detrimental effect on human health. The development of an electrochemical sensor for Hg²⁺ detection is still challenging to obtain ultra-trace sensitivity, excellent selectivity, wide Linear Detection Ranges (LDRs), and ultra-low detection limit. This work presents an electrochemical sensor based on two-dimensional nanomaterials and their composites for the enhanced sensing of Hg²⁺ in water. Graphene oxide (GO)-silver nanowires (AgNWs) composite and metallic 1T phase tungsten disulfide (WS2) microflowers were utilized for the fabrication of electrochemical sensors using drop-casting. Under the optimized experimental conditions, …

On Geometric Design Rules And In-Process Build Quality Monitoring Of Thin-Wall Features Made Using Laser Powder Bed Fusion Additive Manufacturing Process, Aniruddha Gaikwad

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The goal of this thesis is to quantify the link between the design features (geometry), in-process signatures, and build quality of parts made using the laser powder bed fusion (LPBF) additive manufacturing (AM) process. This knowledge is the foundational basis for proposing design rules in AM, as well as for detecting the impending build failures using in-process sensor data.

As a step towards this goal, the objectives of this work are two-fold:

1) Quantify the effect of the geometry and orientation on the build quality of thin-wall features. To explain further, the geometry related factor is the ratio of the …

Ultrasonic-Based Condition Assessment Of Wooden Utility Poles, Yishi Lee

Electronic Theses and Dissertations

More than 300 million utility poles shoulder the utility grid in the United States. However, the ineffectiveness of the current inspection process causes roughly a third of utility poles removed from the service deemed suitable for reuse. Due to the utterly essential role of the power infrastructure, budget shrinkage, and the structural degradation of the modern distribution grid, this Ph.D. dissertation addresses the challenges by proposing a physics-based signal analysis method with a jointly developed ultrasonic UB1000 system c to enhance the objectivity in ultrasonic-based nondestructive evaluation (NDE). The proposed methodology has been deployed commercially in the field and featured …

Thermally Driven Spin Transport In Ferromagnetic Metals, Wafa Saud Aljuaid

Electronic Theses and Dissertations

Since the discovery in 2008, the spin Seebeck effect has become one of the most active topics in the spin caloritronics research field. It opened a new way to create spin current by a combination of magnetic fields and heat. A temperature gradient in ferromagnetic (FM) metals generates a ow of spin current due to split of spin chemical potential between spin up and spin down electrons. This thermal spin current has been detected using an attached nonmagnetic heavy metal with large spin Hall angle via the inverse spin hall effect (ISHE). A voltage signal is generated since the nonmagnetic …

Plasmon-Enhanced Optical Probes For Sensing Of Drug Metabolite, Jennifer Boryczka

Graduate Theses, Dissertations, and Problem Reports (ETD)

An Au@SiO₂ core-shell nanostar structure was synthesized along with CuInS2 quantum dots. The quantum dots display near-infrared fluorescence. In this work, the nanostar structure was functionalized with antibodies and then was utilized as a SERS probe for drug metabolite detection. Drugs are an illicit substance that police, medics, and hospitals need to know if an individual is under the influence of but that individual will not always be willing or able to provide that information. A sensor based on this new probe has been developed for detection of drug metabolites in buffer.

Comprehensively Improved Electrochemical Performance Of Lithium-Sulfur Batteries By “Chemical Anchors” And Lithium Anode Modification, Zhipeng Zeng

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lithium-sulfur battery is considered to be one of the most promising contenders for the next generation high-energy storages due to their high theoretical energy density (~2600 W h kg^-1). However, a series of issues, especially for the dissolution of lithium polysulfides (LiPSs) with their “shuttle effect” and dendrite formation on the lithium anode, greatly limit their widely commercial applications. Starting from a brief overview of conventional methods to solve these problems, the achievements spotlighted in this research work mainly focus on the structure design of cathode materials by employing “chemical anchors” to effectively suppress the diffusion of LiPSs, …

Doping With Rare Earth Elements And Resultant Nano-Inclusions On The Electrical And Thermal Properties Of The Mis-Fit Layered Thermoelectric Oxide, Geoffroy Gauneau

Graduate Theses, Dissertations, and Problem Reports (ETD)

Thermoelectric generators produce electricity by directly converting temperature differences into electrical energy through Seebeck effect. Thermoelectric generators possess many unique features, such as having no moving part and being very reliable with a relatively long lifespan once built. They are solid-state waste heat harvesters. With various waste heat available throughout many industries, thermoelectric generators could offer economically competitive renewable energy. The current state of the art thermoelectric materials includes materials with relatively toxic elements and must work under vacuum, making them quite expensive to produce. Among the various thermoelectric materials, ceramic oxides have been proved to be more chemically stable …

Macro - And Microstructure Evaluation And Field Applications Of Concrete With Recycled Glass Pozzolan, Marija Krstic

Dissertations and Theses

Concrete is the most used material in the world, second only to water. Conventional concrete is produced with Portland cement (PC). The production of cement is an energy intensive operation that has raised significant environmental concerns, since one ton of cement generates an equal ton of CO₂. In the USA about 90 million tons of cement are used annually, with 3 million tons used in New York. Most contemporary concrete applications for buildings and infrastructure use high-performance concrete (HPC) mixtures which are produced by replacing a percentage of cement with supplementary cementitious materials (SCMs), consisting mainly of fly-ash …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …

Paper-Based Point-Of-Care Tools For Blood Testing, Xuefei Gao

Graduate Theses, Dissertations, and Problem Reports (ETD)

Early detection of malignant disease is crucial for timely diagnosis and effective medical intervention, which significantly increases survival rates and reduce financial burden on patients. Biomarkers are becoming increasingly important in detection of malignant diseases, because they can be employed for indicating diseases, predicting risks and monitoring the progression of diseases. In addition, biomarkers show up at early stages of diseases in human tissues and fluids (e.g., blood, urine and saliva), which shows great promise for early disease detection. In this dissertation, paper-based lateral flow strips (PLFSs) have been developed for the detection of disease biomarkers, including protein biomarkers and …

Time-Dependent Reliability Framework For Durability Design Of Frp Composites, Rajneesh Kumar Bharil

Graduate Theses, Dissertations, and Problem Reports (ETD)

The life-cycle performance, durability, and aging characteristics of Fiber Reinforced Polymer (FRP or Structural Composites) have been of keen interest to the engineers engaged in the FRP design, construction, and manufacturing. Unlike conventional construction materials such as steel and concrete, the design guidelines to account for the aging of FRP are somewhat scattered or not available in an approved or consistent format. Loss of strength over time or aging of any structural material should be of concern to engineers as the in-service lifespan of many engineering structures is expected to exceed 100 years. Use of durability strength-reduction factors or factors …

Integrating Graphene Into Polymer Derived Ceramics Towards The Development Of New Thermoelectric Materials, Elizabeth Barrios

Electronic Theses and Dissertations, 2020-2023

Radioisotope thermoelectric generators (RTGs) have been an enabling technology for the exploration of deep space since the dawn of the Space Age. Since its first deployment in a meteorological satellite in the late 1960's, RTGs have been used to provide solid-state, maintenance-free power to 27 American spacecraft and scientific instruments. While showing great success in the past, the future usage of thermoelectric devices is limited by the low operating efficiencies and the use of hazardous or expensive materials, limiting the use of thermoelectric technologies to niche applications such as space exploration. Current research efforts that address these disadvantages have focused …

Development Of 3d Porous Chitosan-Based Platform For In Vitro Culture, Kailei Xu

Electronic Theses and Dissertations, 2020-2023

Three-dimensional (3D) cell cultures have been widely used in biological research since two-dimensional (2D) cultures have many limitations including alteration of cell morphology, metabolic pathways and gene expression. Therefore, the application of 2D cell cultures in pharmaceutical companies for drug screening causes reproducibility issues in animal studies, which strongly influences the efficiency of drug development. The aim of my studies is to develop 3D cell culture models to better mimic the extracellular matrix (ECM) in tumor microenvironment, not only for deeper understanding of interaction between cells and ECM, but also for the application in drug screening. Three different compositions of …

The Effect Of Thermal History On The Atomic Structure Andmechanical Properties Of Amorphous Alloys, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The influence of thermal processing on the potential energy, atomic structure, and mechanical properties of metallic glasses is examined using molecular dynamics simulations. We study the three-dimensional binary mixture, which was first relaxed near the glass transition temperature and zero pressure, and then rapidly cooled deep into the glass phase. It was found that glasses annealed at higher temperatures are relocated to higher energy states and their average glass structure remains more disordered, as reflected in the height of the first two peaks in the pair distribution function. The results of mechanical testing demonstrate that both the shear modulus and …

Modeling Of Scrap Dissolution In Molten Iron For The Case Of Heat Transfer-Controlled Process By Different Approaches And Comparison Of Their Accuracies, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson

Materials Science and Engineering Faculty Research & Creative Works

Dissolution of steel scrap in molten iron is studied by using analytical as well as numerical approaches for the case of a heat transfer-controlled process. The approaches used are Green's function approach, quasi-static approach, integral profile method (IPM) (with parabolic profile), and finite difference methods (FDM). Application of FDM explicit and FDM implicit with fixed grid and variable grid is described. Accuracy of all the approaches is compared in terms of total dissolution time evaluated from overall heat balance criterion. The selection rule of time step and deciding the suitable approach for achieving minimum error for different operating conditions, represented …

In-Situ X-Ray Imaging Of The Selective Laser Melting Process, Meelap M. Coday

Masters Theses

"Fusion-based metal additive manufacturing (AM) has garnered much interest in recent decades. Despite the popularity of fusion-based AM technologies such as selective laser melting (SLM), there are still fundamental questions and uncertainties that need to be addressed. In this work, we focus on the understanding of the undercooling in the SLM process and the uncertainties induced by the laser beam size, power, and scan speed. First, we report the estimation of undercooling in the SLM process from the solidification rate measured by in-situ high-speed synchrotron x-ray imaging, based on the dendrite growth velocity model. The undercooling changes as a function …

Prediction Of Crack Propagation In Zrb₂-Carbon Based Composites Using The Extended Finite Element Method, Leiren Danielle Jarvis

Masters Theses

“The ultra-high temperature ceramic, zirconium diboride (ZrB₂) has long been researched for applications in extreme environments. Its high strength (> 400 MPa) and thermal conductivity (> 100 W/m•K) make it a candidate for use in hypersonic fight, but a low fracture toughness (< 3 MPa•m^1/2) limits this use. In order to increase the fracture toughness without compromising the strength and thermal conductivity, experimental research has focused on the viability of engineered architectures using multiple materials to create a macrostructure. These architectures allow for the increase of fracture toughness thru crack deflection in the material.

Two architectures in particular, …