Copper Nanoparticles In-Situ Anchored On Nitrogen-Doped Carbon For High-Efficiency Oxygen Reduction Reaction Electrocatalyst,
2021
1. Key Laboratory of Green Chemical Process of Xinjiang Corps, College of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, Xinjiang, China;
Copper Nanoparticles In-Situ Anchored On Nitrogen-Doped Carbon For High-Efficiency Oxygen Reduction Reaction Electrocatalyst, Hui-Fang Yuan, Yue Zhang, Xing-Wu Zhai, Li-Bing Hu, Gui-Xian Ge, Gang Wang, Feng Yu, Bin Dai
Journal of Electrochemistry
Compared with noble metal platinum (Pt)-based catalysts, inexpensive non-noble metal electrocatalysts have attracted extensive attention for oxygen reduction reaction (ORR). Herein, chitosan as a kind of biomass resource rich in nitrogen and carbon was used to prepare nitrogen-doped carbon (N-C) and N-C in-situ anchored by copper nanoparticles (Cu/N-C). The as-obtained N-C and Cu/N-C nanoparticles were successfully used as non-noble eletrocatalysts tested for ORR. Compared with the N-C, the Cu/N-C showed the high surface area of 607.3 m 2·g-1 with the mean pore size of 2.5 nm and the pore volume of 0.40 cm3·g-1 …
Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection,
2021
1. School of Chemistry and Chemical Engineering, Jinzhong University, Jinzhong, 030600, Shanxi, China;2. Institute of Environmental Science and School of Chemistry and Chemical Engineering, Shanxi University, Taiyuan 030006, Shanxi, China;
Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li
Journal of Electrochemistry
Due to the independent form of the light source and detection system, photoelectrochemical (PEC) sensor has the advantages of low background, high sensitivity and simple operation. So far, PEC systems have been widely used in the fields including the actual detection of metal ions, biological antibodies or antigens in environmental pollutants. When the photosensitive material is irradiated by a light source with an energy being equal to or greater than its band gap, electrons (e-) transition occurs from the valence band to the conduction band, leaving a hole (h+), at the same time, the generated electron-hole …
Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries,
2021
College of Chemistry & Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, Heilongjiang, China;
Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries, Shu-Jin Li, Zhi-Kang Cao, Wen-Kai Wang, Xiao-Han Zhang, Xing-De Xiang
Journal of Electrochemistry
Aqueous sodium-ion batteries show promising application in fields of large-scale storage of intermittent renewable energies owing to the earth-abundant sodium resources and incombustible aqueous electrolytes. Primary factors determining whether they can be commercially utilized are low cost and long lifetime. Among current electrode materials, NASICON-type NaTi2(PO4)3 arouses wide interests as an anode material for aqueous sodium-ion batteries as it offers a high specific capacity, fast Na-transport ability and reasonable working potential, however, suffering from insufficient cycling performance caused by severe dissolution of active materials in traditional aqueous electrolytes. In this work, a functional sulfate electrolyte …
Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries,
2021
1. School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China;
Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries, Gui-Xiang Zhao, Wail Hafiz Zaki Ahmed, Fu-Liang Zhu
Journal of Electrochemistry
In recent years, lithium-sulfur (Li-S) batteries have been considered as a promising candidate for the next generation of energy storage system due to their ultrahigh theoretical capacity (1675 mAh·g-1) and energy density (2600 Wh·kg-1). However, the practical application of Li-S batteries is seriously limited by their insulating nature of sulfur, the shuttle effect of polysulfides (LiPSs), and volume expansion during charging and discharging. To overcome those disadvantages, one of the commonly methods is to infiltrate sulfur into porous conductive carbon framework, such as porous carbon, hollow carbon spheres, graphene, carbon nanotubes and some composites of the …
Structure Analysis Of Pemfc Cathode Catalyst Layer,
2021
Fuel Cell Institute, School of Mechanical and Power Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui
Journal of Electrochemistry
The sluggish oxygen reduction reaction (ORR) on the cathode of the proton exchange membrane fuel cell (PEMFC) has always been one of the key factors limiting its commercialization. The optimization of the cathode catalytic layer structure plays an important role in improving fuel cell performance and reducing production costs. In this paper, two different catalysts (platinum nanoparticles (Pt-NPs) and platinum nanowires (Pt-NWs)) were prepared by using catalyst coated substrate (CCS) method. By constructing a double-layer catalytic layer structure, we analyzed the effect of different catalytic layer structures by performing a single cell test. The results showed that the dense platinum …
Formation And Morphological Evolution Of Nanoporous Anodized Iron Oxide Films,
2021
School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;
Formation And Morphological Evolution Of Nanoporous Anodized Iron Oxide Films, Jin-Wei Cao, Nan Gao, Zhao-Qing Gao, Chen Wang, Sheng-Yan Shang, Yun-Peng Wang, Hai-Tao Ma
Journal of Electrochemistry
The preparation of iron oxide films with nanoporous structure by anodization has attracted much attention for its potential applications. However, the formation mechanism of porous structure during anodization is still unclear. In this paper, the composition of anodic current during the formation of nanoporous anodized iron oxide film was analyzed in combination with the current density-potential response (I-V curve) and the derivation of Faraday’s law. The results showed that the anodic current consisted of an ionic current (leading to the migration of ions to form oxide) and an electronic current (leading to the oxygen evolution), and the …
Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry,
2021
Tashkent State Technical University named after Islam Karimov
Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry, Berdiyarov Tilovkabulovich Berdiyarov Dr., Sh. T. Khojiev, S. T. Matkarimov, Sh. Munosibov
Technical science and innovation
The article considers the problems of utilization of industrial gases formed in the production of copper and ore containing sulfur anhydrides. Currently, the composition of process gases entering the gas purification department is approximately 6-7% SO2, 0.2-0.3% SO3 and other gases, until sulfuric acid is obtained from these gases, the sulfate is treated in a counter-scheme with 8% sulfate acid. The aim is to first reduce the temperature of the exhaust gases and second to avoid flying components such as as As, F, Se. As a result of the studies, the amount of SO2 in the …
Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors,
2021
Air Force Institute of Technology
Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith
AFIT Patents
A passive microscopic Fabry-Pérot Interferometer (FPI) sensor an optical fiber a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fighter that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.
Predictive Computational Materials Modeling With Machine Learning: Creating The Next Generation Of Atomistic Potential Using Neural Networks,
2021
Mississippi State University
Predictive Computational Materials Modeling With Machine Learning: Creating The Next Generation Of Atomistic Potential Using Neural Networks, Mashroor Shafat Nitol
Theses and Dissertations
Machine learning techniques using artificial neural networks (ANNs) have proven to be effective tools to rapidly mimic first principles calculations. These tools are capable of sub meV/atom accuracy while operating with linear scaling with respect to the system size. Here novel interatomic potentials are constructed based on the rapid artificial neural network (RANN) formalism. This approach generates precise force fields for various metals that have historically been difficult to describe at the atomic scale. These force fields can be utilized in molecular dynamics simulations to provide new physical insights. The RANN formalism, which is incorporated into a LAMMPS molecular dynamics …
Effects Of Bonding Pressure And Lamina Thickness On Mechanical Properties Of Clt Composed Of Southern Yellow Pine,
2021
Mississippi State University
Effects Of Bonding Pressure And Lamina Thickness On Mechanical Properties Of Clt Composed Of Southern Yellow Pine, Cody S. Bates
Theses and Dissertations
This study produced cross-laminated timber panels at a range of four lamina thickness (5/8, 1, 1 1/8, and 1 1/4 inch) and three bonding pressures (50, 125, 200 psi), producing a total of 12 panels for mechanical testing. The goal of this study is to observe how the thickness and pressure trends affect the mechanical properties of CLT. Tests include flatwise bending, flatwise shear, internal-bond, and delamination. Results showed that bending MOE decreases as the panel thickness increases while bonding pressure had no significance. Bending MOR was less significant for the thickness and more significant for pressure compared to the …
Study Of Alloy And Process Modifications To Design Hydrogen Resilient High Hardness Steels,
2021
Mississippi State University
Study Of Alloy And Process Modifications To Design Hydrogen Resilient High Hardness Steels, William R. Williams
Theses and Dissertations
High hardness steels (HHS) are vulnerable to hydrogen embrittlement, which can lead to rapid degradation of mechanical properties. Improved resistance to hydrogen embrittlement would be beneficial to many industries including construction, automotive, and military. A comparison study was performed to assess the hydrogen susceptibility of select commercially available and in-house designed HHS alloys. Slow strain rate tensile tests, performed with specimens charged with various levels of hydrogen, provided a macroscopic view of the onset of hydrogen embrittlement. Hydrogen permeation and thermal desorption spectroscopy tests determined the uptake and diffusivity of hydrogen through the material. The evaluation of hydrogen susceptibility for …
Energy Efficient Configuration Or Perforated Solar Screens For Residential Desert Buildings,
2021
The American University in Cairo AUC
Energy Efficient Configuration Or Perforated Solar Screens For Residential Desert Buildings, Rasha Arafa
Archived Theses and Dissertations
In hot arid desert environments, the solar radiation passing through windows increases the cooling loads and energy consumption of buildings. Shading of windows can reduce these loads. External perforated wooden solar screens were traditionally used for windowsâ shading. However, there is a lack in understanding their performance in a quantitative manner and unavailability of scientific means that could be used for developing new efficient designs that suit the harsh desert conditions. This thesis investigates the impact of changing screen configurations such as perforation percentage, depth, perforation openings aspect ratio and reflectivity on the energy loads, hence defining the most efficient …
The Process-Structure-Property-Performance Of Aisi 1020,
2021
Mississippi State University
The Process-Structure-Property-Performance Of Aisi 1020, Jonathan Wellman, Tate James, Robbie Christman, Brian Broom
ME 4133/6133 Mechanical Metallurgy
AISI 1020 is widely used in many different industries due to its high strength, high ductility, high machinability, and good weldability. AISI 1020 has a number of applications. Low carbon steel can be used on a macroscale to build bridges, and low carbon steel can be used on smaller scales such as Lawnmower blades. Low carbon steel is the material of choice for lawn mower blades because of its ability to bend before it breaks. The ductile attribute of low carbon steel also has many other benefits.
Ti-6al-7nb Utilization In Surgical Implants,
2021
Mississippi State University
Ti-6al-7nb Utilization In Surgical Implants, Michael O. Fleming
ME 4133/6133 Mechanical Metallurgy
This presentation discusses the processing, structure, properties, and performance of Ti-6Al-7Nb in relation to use as a surgical implant.
The Effect Of Air-Entraining On Concrete Durability,
2021
The American University in Cairo AUC
The Effect Of Air-Entraining On Concrete Durability, Jane Magdy Aziz Abadir
Archived Theses and Dissertations
No abstract provided.
Finite Element Modeling Of Superplastic Forming Of High Strength Aluminium Alloys (Weldalite Tm 049),
2021
The American University in Cairo AUC
Finite Element Modeling Of Superplastic Forming Of High Strength Aluminium Alloys (Weldalite Tm 049), Ihab Farouk Nabil Ragai
Archived Theses and Dissertations
No abstract provided.
Elastic-Plastic Behavior And Limit Load Analysis Of Pipe Bends Under Out-Of-Plane Moment Loading And Internal Pressure,
2021
The American University in Cairo AUC
Elastic-Plastic Behavior And Limit Load Analysis Of Pipe Bends Under Out-Of-Plane Moment Loading And Internal Pressure, Hashem Mo Mourad
Archived Theses and Dissertations
No abstract provided.
Effect Of Mechanical Systems In Combating The Schistosomiasis Snails,
2021
The American University in Cairo AUC
Effect Of Mechanical Systems In Combating The Schistosomiasis Snails, Sherine Ahmed El Baradei
Archived Theses and Dissertations
No abstract provided.
Development Of Pspp Map For Stainless Steel Alloys Used In A Marine Environment,
2021
Mississippi State University
Development Of Pspp Map For Stainless Steel Alloys Used In A Marine Environment, Jarrett D. Hawkins
ME 4133/6133 Mechanical Metallurgy
A process-structure-properties-performance map will be created for these alloys focusing on the modification of the structure or composition and outlining the processes required and the affected properties. A thorough review of different chemical alloys, grain refining methods, and grain boundary compositions for several alloys and their corresponding property effects. Also plan to review material treatment processes and standard refining methods for stainless steels. The performance of these metals will be evaluated for property requirements in regards to strength, toughness, with an emphasis on corrosion resistance.
A Temporal Analysis Of The Microbiota And Biofouling Development On Artificial Substrates In The Port Everglades Inlet, Florida,
2021
Nova Southeastern University
A Temporal Analysis Of The Microbiota And Biofouling Development On Artificial Substrates In The Port Everglades Inlet, Florida, Denise Swack
All HCAS Student Capstones, Theses, and Dissertations
A pilot project was deployed in Port Everglades Inlet, Florida that aimed to evaluate the biofilm composing the microbiome on ecologically engineered artificial substrates used to build Coastal Marine Infrastructure. In April of 2017, an Articulated Concrete Block Mattress comprised of an ecological engineered concrete substrate and a standard smooth surface control substrates were compared. This study will provide a profile on the microbiome community on artificial substrates within Port Everglades Inlet on bio-enhancing concrete-based solutions in our Coastal Marine Infrastructure. To study the microbial community, the 16s rRNA technology was used in Illumina’s high-throughput DNA sequencing. Samples were collected …
