Materials Science and Engineering Commons^™

Magnetic Nanoparticles Coated With Zwitterionic Copolymer As An Advanced Material For Rapid And Instrument-Free Biomolecular Detection In Human Serum, Supannika Boonjamnian, Varunee Sadsri, Voravee P. Hoven, Piyaporn Na Nongkhai

Journal of Metals, Materials and Minerals

The traditional agglutination assays especially those based on polystyrene beads have been recognized as convenient tools for disease diagnosis despite their limited detection range and low sensitivity. Unlike other particles namely polystyrene beads, SiO2 and gold nanoparticles having insignificant magnetic properties, magnetic nanoparticles (MNPs) offer unique advantages as their magnetic properties for agglutination methods. In the presence of magnet, not only can they be used to enrich the samples, but also their aggregation can also be induced, providing sensitive and rapid measurements. This work aims to develop MNPs for aggregation-based biomolecular detection. The MNPs were surface-modified with PMAMPC via an …

Synthesis And Advanced Characterization Of Energy Materials, Erik Sarnello

Graduate Research Theses & Dissertations

Catalysts are used in an extremely broad range of systems including everything from biological systems to industrial processes. An ideal catalyst offers robust stability and high activity. This work focuses on the synthesis and characterization of materials that show promise in the field of catalysis. Advanced synchrotron characterization techniques and unique experimental design are highlighted to provide foundation work that will provide the necessary information to aid in designing and fabricating catalytic materials. Supported metal nanoparticle (SMN) catalysts are enormously crucial for many catalytic applications. However, catalyst deactivation, caused by sintering and coke formation, is a ubiquitous problem that significantly …

Electrochemical Chloride Removal, Marcus Yudt

Williams Honors College, Honors Research Projects

Electrochemical chloride removal (ECR) was tested to see its effectiveness in preventing corrosion on rebar samples within 3.5 wt% sodium chloride concrete. In order to do this, three scenarios were evaluated using electrochemical techniques such as cyclic potentiodynamic polarization and electrochemical impedance spectrsoscopy as well as visual inspections. The three scenarios that were evaluated were one with no chlorides present within the concrete, one that was a worst-case scenario where extreme pitting and corrosion were initiated, and one that had chlorides present and received the ECR treatment. Cyclic polarization curves showed that the ECR and reference without chlorides had similar …

Molten Salt Technologies For Advanced Nuclear Fuel Cycles And Molten Salt Reactors, Dimitris Killinger

Theses and Dissertations

This dissertation provides five topics—an assessment of different monitoring and analytical techniques often cited in the literature for molten salt systems and designs for nuclear engineering applications. First, we explored commonly used materials for quasi-reference electrodes in molten chloride salts. Second, the limitations of the electrochemical analysis known as cyclic voltammetry due to the concentration of uranium(III) present were being investigated. Third, we provided an experimental assessment on the development of a spectroelectrochemical cell for interrogating various spectroelectrochemical techniques, namely chronoabsorptometry and chronofluorometry, and their limitations due to the presence of uranium(III) ions. Fourth, a study on the corrosion resistance …

Effects Of Additive Manufacturing Techniques On The Magnetocaloric Properties And Chemical Stability Of Lafexcoysi13-X-Y Alloys, Binyam Wodajo

Theses and Dissertations

Additive manufacturing (AM) is an emerging process to fabricate net shape, intricate, engineering components with minimal material waste; however, traditionally it has been largely applied to structural materials. AM of functional materials, such as magnetic materials, has received much less attention and the field is still in its infancy. To date, AM of magnetocaloric regenerators for magnetic refrigeration (an energy-efficient alternative to the conventional vapor-compression cooling technology), remains a challenge. There are several magnetic refrigerator device designs in existence today that are predicted to be highly energy-efficient, on condition that suitable working materials can be developed. This challenge in manufacturing …

Rational Design Of Flexible And Stretchable Electronics Based On 3d Printing, Yuanhang Yang

Theses and Dissertations

Flexible and stretchable electronics have been considered as the key component for the next generation of flexible devices. There are many approaches to prepare the devices, such as dip coating, spin coating, Mayer bar coating, filtration and transfer, and printing, etc. The effectiveness of these methods has been proven, but some drawbacks cannot be ignored, such as lacking pattern control, labor consuming, requiring complex pretreatment, wasting conductive materials, etc.

In this investigation, we propose to adopt 3D printing technology to design flexible and stretchable electronics. The objective is to rationally design flexible and stretchable sensors, simplify the preparation process, form …

Rational Design Of Metal-Organic Frameworks (Mofs)-Based Functional Materials Towards Better Air Quality, Zan Zhu

Theses and Dissertations

Air pollution is a major threat to environmental safety and public health. Volatile organic compounds (VOCs), particulate matter (PM), and airborne microorganisms are three typical air pollutants. Conventional strategies to prevent and mitigate air pollution have been employed, which, however, are generally passive. For instance, VOC sensing through solid-state devices is a conventional approach, which, however, is not capable of capturing and removing VOCs. On the other hand, air filters and face masks are useful equipment to protect people from inhaling PM and airborne microorganisms. But most commercial filters can only capture them on the surfaces, which may cause secondary …

Understanding Structure/Process-Property Relationships To Optimize Development Lifecycle In Yttria-Stabilized Zirconia Aerogels For Thermal Management, Rebecca C. Walker

Theses and Dissertations

Aerogels are mesoporous materials with unique properties, including high specific surface area, high porosity, low thermal conductivity, and low density, increasing these materials’ effectiveness in applications such as catalyst supports, sorption media, and electrodes in solid oxide fuel cells. Zirconia (ZrO₂) aerogels have special interest for high-temperature applications due to the high melting point of ZrO₂ (2715°C) and stability between 600°C and 1000°C, where other aerogel systems often begin to sinter and densify. These properties and unique pore structure make zirconia aerogels advantageous as thermal management systems, especially in aeronautics and aerospace applications. However, to be effective …

Augmented Reality Integrated Welder Training For Mechanical Engineering Technology, Aditya Akundi, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

The shortage of welders is well documented and projected to become more severe for various industries such as shipbuilding in coming years. It is mainly because welding training is a critical and often costly endeavor. This study examines the training potential using augmented reality technology as a critical part of welder training for mechanical engineering technology students. This study assessed the performance of two groups of MET students trained with two different methods. One group received training with the traditional method in three sessions. The second group acquired training initially with an augmented reality welding system for three sessions. Then, …

An Electrochemical-Mechanical Investigation Of Next Generation Lithium Metal Electrode And Solid Electrolyte, Andrew Meyer

Theses and Dissertations--Chemical and Materials Engineering

Lithium-ion batteries (LIBs) are a staple in today’s society. From our cellphones, laptops, power tools, the ever-growing electric vehicle, and many more application, LIBs are more important to us than most realize. They provide the best combination of both high-energy and high-power density compared to other battery types such as Ni-Cd, Ni-MH, or the lead acid batteries used in our cars. Plus, LIBs are much safer. However, as new technologies grow and are developed, the demand for higher energy and power density, better safety, lower costs, and longer life increases. One way to achieve the ever-increasing demands is to replace …

Improving Manufacturing Processes For Making Lithium Ion Battery Electrodes, Ming Wang

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium-ion batteries (LIBs) are widely used to provide energy and power in portable electronics, electric vehicles, and energy storage systems. The LIB market has grown dramatically as they have a combination of high energy density, high power density, proven reliability, and long cycle life. The manufacturing process is one of the key factors as it strongly affects the cost and performance of LIBs.

This dissertation is focused firstly on the development of a conventional slurry-based electrode manufacturing process. Slurry making is a critical step that affects the subsequent steps in battery manufacturing. In this work, we have investigated the …

Microscale Contact And Friction Of Low Modulus, Lightly Crosslinked Polydimethylsiloxane, Justin Glover

Theses and Dissertations--Chemical and Materials Engineering

Friction and adhesion of soft materials are important for pressure sensitive adhesives, biomaterials, and soft robotics; however, the behavior on the microscale is not fully understood. When two objects come into contact, their interactions are usually mediated by small contact points due to surface roughness. At the microscale size, surface forces can deform soft materials to minimize energy by increasing the contact area, which is balanced by the elastic deformation of the polymer network. However, for soft, crosslinked materials with a modulus below ~100 kPa, it is challenging to predict the behavior with prior contact and friction models. Additionally, lightly …

Derivation, Exploration And Evaluation Of Non-Equiatomic High Entropy Alloys, Artashes Ter-Isahakyan

Theses and Dissertations--Chemical and Materials Engineering

High-entropy alloys (HEAs) are a class of multicomponent alloys based on an innovative alloying strategy that employs multi-principle elements in relatively high concentrations. Commonly defined as alloys that contain at least five principal elements, each with a concentration between 5 and 35 at %. The term entropy refers to the excess configurational entropy associated with HEAs, which is thought to facilitate the formation of solid solutions. The design strategy results in vast compositional space for exploration and innovative potential triggering a renaissance in physical metallurgy. These alloys may have favorable properties compared to conventional dilute solid solutions, but their preeminent …

ผลของความหนาแน่นพลังงานในการขึ้นรูปต่อโครงสร้างจุลภาคและสมบัติทางกลของโลหะแก้วTi-Zr-Cu ที่ถูกขึ้นรูปด้วยวิธีการเพิ่มเนื้อวัสดุ, ภัทรพงษ์ วรรณประไพ

Chulalongkorn University Theses and Dissertations (Chula ETD)

โลหะผสม Ti58.5Zr31.5Cu10 เนื้อพื้นไทเทเนียมที่ถูกเสริมแรงด้วยเฟส β ถูกขึ้นรูปด้วยวิธีการขึ้นรูปแบบเพิ่มเนื้อวัสดุ (additive manufacturing) ด้วยการใช้ผงโลหะที่ถูกผสมโดยใช้ผงโลหะบริสุทธิ์ของทั้งสามธาตุ งานวิจัยนี้ทำการศึกษาเกี่ยวกับผลของความหนาแน่นพลังงานที่ใช้ในการขึ้นรูปต่อการผสมกันของโลหะและความไม่สม่ำเสมอของโครงสร้างจุลภาครวมไปถึงเฟสที่เกิดขึ้น ซึ่งถูกตรวจสอบด้วยเทคนิค X-ray diffraction (XRD) Scanning electron microscope (SEM) และ Electron probe micro analyzer (EPMA) โดยผลลัพธ์แสดงให้เห็นว่าความหนาแน่นพลังงานสูงขึ้นนำไปสู่การตกผลึกมากขึ้น ในขณะที่ความหนาแน่นพลังงานต่ำกว่ามีแนวโน้มที่จะส่งผลให้เกิดโลหะผสมที่มีเนื้อพื้นอสัณฐาน (BMGC) และ เฟสยูเทคติค โดยโครงสร้างจุลภาคของโลหะผสมที่มีเนื้อพื้นอสัณฐาน ประกอบด้วยเฟส β ที่มีลักษณะเดนไดรท์และโครงสร้างอสัณฐานในบริเวณช่องว่างระหว่างเดนไดรท์ (interdendritic region) ธาตุ Ti เกิดการรวมตัวจำนวนมากบริเวณเฟสเนื้อพื้น β ในขณะที่ธาตุ Cu และ Zr รวมตัวกันจำนวนมากบริเวณเฟสอสัณฐานและเฟสยูเทคติค จากการตรวจสอบเพิ่มเติมเกี่ยวกับการกระจายตัวทางเคมีภายในแอ่งน้ำโลหะ พบว่าเมื่อความหนาแน่นพลังงานต่ำจะมีความไม่สม่ำเสมอของธาตุผสม เนื่องจากการขาดการไหลของของเหลวภายในแอ่งน้ำโลหะ ที่เป็นตัวกระตุ้นการผสมกันของธาตุ การจำลองการไหลของของไหลด้วยความร้อนตามหลักการพลศาสตร์ของไหลเชิงคำนวณ (CFD) ได้ถูกดำเนินการเพื่อจำลองปรากฎการณ์ที่เกิดขึ้นเพื่อตรวจสอบการผสมทางเคมีของธาตุผสม เมื่อความหนาแน่นของพลังงานในการขึ้นรูปสูงขึ้น ความเร็วของการไหลที่ถูกเหนี่ยวนำจะทำหน้าที่กวนสารเคมี ทำให้การผสมกันของธาตุมีประสิทธิภาพมากขึ้น ในขณะที่เมื่อความหนาแน่นพลังงานต่ำลง การผสมของธาตุค่อนข้างจำกัดเนื่องจากการไหลเวียนของของไหลน้อยลง ส่งผลให้องค์ประกอบทางเคมีไม่สม่ำเสมอในบางบริเวณ อัตราการเย็นตัวที่สูงขึ้นยังพบได้ในแบบจำลองในสภาพที่มีความหนาแน่นของพลังงานต่ำกว่า ความแปรผันขององค์ประกอบทางเคมีที่ไม่สม่ำเสมอในบางบริเวณนี้ โดยเฉพาะอย่างยิ่งในบริเวณที่มีการรวมตัวของธาตุ Cu และ Zr สูง นำไปสู่การเกิดความไม่สม่ำเสมอของโครงสร้างจุลภาคของ BMGC และเฟสยูเทคติก งานวิจัยนี้แสดงให้เห็นถึงความเข้าใจเกี่ยวกับพฤติกรรมของของไหลภายในแอ่งน้ำโลหะของผงโลหะที่ถูกผสมโดยใช้ผงโลหะบริสุทธิ์ที่ถูกขึ้นรูปด้วยวิธีการขึ้นรูปแบบเพิ่มเนื้อวัสดุ ซึ่งอาจนำไปสู่การปรับปรุงและพัฒนาโครงสร้างจุลภาคให้มีประสิทธิภาพมากขึ้นสำหรับการผลิตโลหะผสมเนื้อพื้นไทเทเนียมที่ถูกเสริมแรงด้วยเฟสต่างๆ

Optimize The Niu Split Hopkinson Pressure Bar Apparatus For Conducting High Strain Rate Tensile Test On S304 Foils, Jiale Ji

Graduate Research Theses & Dissertations

Split Hopkinson Bar (SHB) methods are widely used to experimentally characterize the mechanical properties of materials such as metals, concrete, and ceramics undergoing rapid deformation. NIU had a split-Hopkinson tensile apparatus that can conduct coarse tensile test, but it can’t output the useful signal. The aim of this thesis is to optimize the existing apparatus, so the high strain rate tensile tests for the stainless steel 304 can be conducted and useful signal can be got. The alignment of the bars is critical for a good signal that has less noise. To eliminate the noise signal, some accurate fixture is …

Warm Unit Stand Analysis For Proton Improvement Project Ii, Michael William Pavlick

Graduate Research Theses & Dissertations

The Proton Improvement Project II, commonly referred to as PIP II, is a linear accelerator overhaul at Fermilab to eventually double the output of its existing proton beam to continue to be the leading force in high energy physics. The proton beam is created through a series of high frequency cryomodules that must be connected utilizing a combination of magnets and vacuum pumps to ensure the beam is properly aligned. A housing mechanism for the magnets and vacuum pumps (Warm Units) will be placed between the cryomodules for realignment and require multiple stages of 6 degree-of-freedom adjustment options, to ensure …

Precision Machining Of Polymer Matrix Composites, Victor Martinez Polanco

All Graduate Theses, Dissertations, and Other Capstone Projects

This experiment was started to figure how the precision machining of polymer matrix composites differ from metals such as aluminum and steel. Polymer matrix composites are highly used in powered vehicles for their strength and light weight properties, but they are typically not machined to their final product how metals are. Polymer matrix composites are typically manufactured near their final shape, with some trimming involved to complete its shape. This research machined carbon fiber manufactured through a wet layup and through resin infusion, as well as aluminum and steel to compare their machineability and their surface finish. These materials were …

Branched Chain Amino Acid Strain State Monitoring With Raman Spectroscopy And Plasmonic Bowtie Nanoantenna Devices For Early Disease Detection, Caroline A. Campbell

Theses and Dissertations

This work centers on the development and the down-selection of nano-manufactured devices to be used in conjunction with Raman spectroscopy for probing a branched chain amino acid. The nano-manufactured devices integrate plasmonic nanoantennas for the purpose of amplifying molecular fingerprints, which are otherwise difficult to detect, through Surface Enhanced Raman Spectroscopy (SERS). Plasmonic nanostructures can be utilized for a variety of biomedical and biochemical applications to detect the characteristic fingerprint provided by Raman Spectroscopy. The nano-manufactured devices create an electric field that amplifies minute perturbations and raises the signal above background noise. This may provide a deeper understanding of signal …

Protocols Of Improvements For Pmma Denture Base Resin: An Overview, Nidal W. Elshereksi, Fathie A. Kundie, Andanastuti Muchtar, Che H. Azhari

Journal of Metals, Materials and Minerals

Polymethyl methacrylate (PMMA) is a polymer that is expansively employed in denture base construction due to its low cost, aesthetics, lightweight, reparability, and processability. Nevertheless, this material is not ideal to fulfill the mechanical and physical characteristics of dental restorations. Despite the popularity of the thermal polymerization method, the main shortcoming is the prolonged curing period. Thus, correctly selecting a polymerization cycle and post-polymerization treatment is needed to achieve promising outcomes. In autoclave polymerization, pressure plays a crucial function in accelerating the initial polymerization as well as decreasing the pores and remaining monomer level, thereby improving the flexural strength. Besides, …

Bio-Composite Of Nipa Palm Husk Derived Activated Carbon/Poly(Butylene Succinate): An Effective Agricultural Waste Based Adsorbent For Ammonia Removal, Chaichana Piyamawadee, Viboon Sricharoenchaikul, Duangdao Aht-Ong

Journal of Metals, Materials and Minerals

In this work, activated materials were successfully prepared by pyrolyzing various ratios of Nipa palm husk powder to potassium hydroxide  (1:1, 1:2, and 1:3) at predetermined temperatures (500℃, 600℃, and 700℃). The surface area was obtained from nitrogen isotherms using the Brunauer-Emmett-Teller (BET) equation. The surface area of the prepared activated carbon was increased with decreasing potassium hydroxide impregnation ratio and increasing pyrolyzing temperature. The highest surface area was 1,211 m2×g-1. In contrast, acidic surface functional groups investigated by Boehm’s titration were increased with decreasing pyrolyzing temperature and impregnation ratio. Ammonia removal capacity was increased with an increase in the …