Amino-Containing Polymer-Coated Magnetite Nanoparticles As Nano-Adsorbents For Bisphenol A: Synthesis, Kinetic And Thermodynamic Study,
2022
Chulalongkorn University
Amino-Containing Polymer-Coated Magnetite Nanoparticles As Nano-Adsorbents For Bisphenol A: Synthesis, Kinetic And Thermodynamic Study, Jakkrit Tummachote, Metha Rutnakornpituk, Duangdao Channei, Filip Kielar, Boonjira Rutnakornpituk
Journal of Metals, Materials and Minerals
Magnetite nanoparticles coated with poly(dimethyl aminoethyl methacrylate) (PDMAEMA@MNPs) and their quarternized form (PQDMAEMA@MNPs) were successfully synthesized and used as nano-adsorbents for bisphenol A (BPA). The particles were spherical with the average particle size between 10 and 20 nm in diameter with a moderate degree of nanoclustering (ca.150-200 particles/cluster). In terms of adsorption properties, the PDMAEMA@MNPs exhibited a higher BPA adsorption capacity (1.05 mg/g MNP at pH 9) than the quaternized form (0.50 mg/g MNP at pH 9). Equilibrium isotherm, kinetic, and thermodynamic characteristics of BPA adsorption on the PDMAEMA@MNPs were investigated. It was found that the BPA adsorption …
Elastic Properties Of Boro-Tellurite Glasses Doped With Europium Oxide,
2022
Chulalongkorn University
Elastic Properties Of Boro-Tellurite Glasses Doped With Europium Oxide, Chinnappareddy Devaraja, G. V. Jagadeesha Gowda, Bheemaiah Eraiah, G. K. Narasihma Murthy
Journal of Metals, Materials and Minerals
The glass series of xEu2O3-5PbO-25TeO2-(70-x) B2O3, where x=0.1 mol% to 0.6 mol% were prepared by employing the conventional melt quenching method. The non-crystallinity of prepared BTE glasses was examined by the X-ray diffraction method. The very important mechanical properties such as elastic moduli, Debye temperature, Poisson’s ratio, fractional bond connectivity, softening temperature, acoustic impedance, and the thermal expansion coefficient of the BTE glasses have been studied by measuring ultrasonic velocity. The experimental results indicate that the calculated parameters strongly depend on increasing Eu2O3 concentration. The elastic moduli of the prepared samples were found to decrease with Eu2O3 concentration and this …
Enhanced Photocatalytic Activity Of Zno Nanostructures Deposited On Mesh Through Electrochemical Deposition And Thermal Oxidation,
2022
Chulalongkorn University
Enhanced Photocatalytic Activity Of Zno Nanostructures Deposited On Mesh Through Electrochemical Deposition And Thermal Oxidation, Chantana Aiempanakit, Thongchai Phantaporn, Kamon Aiempanakit
Journal of Metals, Materials and Minerals
This article reported that the properties of zinc oxide (ZnO) nanostructures were modified by the thermal oxidation process at different temperatures in the range of 200℃ to 600℃ for 1 h. The Zn films were deposited on a stainless steel mesh by using the electrochemical deposition technique. The elemental composition of Zn and O was exhibited via energy-dispersed X-ray spectroscopy in which the atomic ratio of O/Zn increased with the increase of oxidation temperature. The results showed that oxidation temperature has a significant effect on the morphological and crystal structure. The nanosheet structure of the as-deposited film transferred to the …
Brazilein Modified Zinc Oxide Nanorods With Enhanced Visible Light-Responsive Photocatalytic Efficiency,
2022
Chulalongkorn University
Brazilein Modified Zinc Oxide Nanorods With Enhanced Visible Light-Responsive Photocatalytic Efficiency, Montri Aiempanakit, Penpicha Sudjai, Kittiyaporn Singsumphan, Sakchai Laksee, Cheewita Suwanchawalit
Journal of Metals, Materials and Minerals
Photocatalytic efficiency of ZnO nanorods has been investigated with respect to the concentration of brazilein. Brazilein modified ZnO nanorods were prepared by an impregnation process with 1.0%w/v, 2.5%w/v, and 5.0%w/v of brazilein solution. In order to correlate the variation in concentration distributions and photocatalytic performance, the phase composition, optical properties, and photo-catalytic activities of brazilein modified ZnO nanorods prepared with different brazilein concentrations have been investigated and compared to an unmodified ZnO nanorods. The photocatalytic properties were measured in terms of indigo carmine degradation under visible light irradiation. It was found that ZnO nanorods with the highest visible light-responsive photocatalytic …
Extraction Of Molybdenum From A Spent Hds Catalyst Using Alkali Leaching Reagent,
2022
Chulalongkorn University
Extraction Of Molybdenum From A Spent Hds Catalyst Using Alkali Leaching Reagent, Chatisa Kansomket, Piamsak Laokhen, Tanongsak Yingnakorn, Tapany Patcharawit, Sakhob Khumkoa
Journal of Metals, Materials and Minerals
This research investigated extraction of molybdenum from spent hydrodesulfurization (HDS) catalyst used in petroleum refinery. The spent HDS catalyst still however contains significant amounts of valuable metals such as molybdenum and nickel for example, thereby recovery of such metals are of great interest. Pyro-hydrometallurgical process was utilized in this research to selectively extract molybdenum from the spent HDS catalyst using alkali leaching reagent. The process start from calcination of spent HDS catalyst, alkali leaching using sodium carbonate, purification by carbon adsorption-desorption, precipitation of ammonium molybdate and finally calcination to give molybdenum trioxide (MoO3) as the final recycling product. Effects of …
Recovery Of Nickel From Spent Electroplating Solution By Hydrometallurgical And Electrometallurgical Process,
2022
Chulalongkorn University
Recovery Of Nickel From Spent Electroplating Solution By Hydrometallurgical And Electrometallurgical Process, Piamsak Laokhen, Natthicha Ma-Ud, Tanongsak Yingnakorn, Tapany Patcharawit, Sakhob Khumkoa
Journal of Metals, Materials and Minerals
Recovery of nickel from spent electro nickel plating solution has been investigated via hydro-metallurgical and electrometallurgical processes. Experimental consisted of 3 steps, including precipitation of nickel from spent solution, leaching of nickel precipitate, and electrowinning of nickel. Nickel precipitation was performed using sodium hydroxide. Leaching parameters such as 1 M to 3 M sulfuric acid concentration, 100 g×L-1 to 300 g×L-1 solid to liquid ratio, and 30 min to 180 min leaching time were investigated. The leachate from the optimal leaching condition was further used as an electrolyte in electrowinning process. Effects of 3.3 V to 3.7 V cell voltage …
Development Of Aggregate From Bottom Ash In Environmentally Friendly Concrete,
2022
Chulalongkorn University
Development Of Aggregate From Bottom Ash In Environmentally Friendly Concrete, Udomvit Chaisakulkiet, Nattapong Makaratat, Sumrerng Rukzon
Journal of Metals, Materials and Minerals
This research presents a study of bottom ash for using as fine and coarse aggregates in concrete, B-F and B-C, respectively. Results of compressive strength and durability of the concrete containing B-F and B-C aggregates were investigated. Normal fine and coarse aggregates were replaced with the B-F and B-C aggregates at 0, 25, 50, 75 and 100% by weight of the normal aggregates. The results showed that the compressive strengths of the concretes were increased when the B-F and B-C aggregates were used at replacement levels of 25% and 50%. The water absorption and chloride resistances of the concretes were …
Uio-Type Metal-Organic Framework Derivatives As Sorbents For The Detection Of Gas-Phase Explosives,
2022
University at Albany, State University of New York
Uio-Type Metal-Organic Framework Derivatives As Sorbents For The Detection Of Gas-Phase Explosives, Matthew Ryan Sherrill
Legacy Theses & Dissertations (2009 - 2024)
The detection of energetic compounds – better known to the public as explosives – has is an important cornerstone of counterterrorism and homeland security . While significant advances have been achieved for the detection of trace explosives in various matrices such as soil, wastewater, and clothing, the detection of explosives in the gas phase remains challenging due to their infamously low vapor pressures. In this thesis, we leverage the high sensitivity of direct analysis in real-time mass spectrometry (DART-MS) and the microporosity of metal-organic frameworks (MOFs) to adsorb and therefore concentrate explosives from the vapor phase and subsequently detect them …
Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results,
2022
Michigan Technological University
Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results, Emily Zeitunian
Dissertations, Master's Theses and Master's Reports
Composite materials require a multi-scale approach to fully understand its behavior. At the micro level, material behavior analysis is conducted most often using numerical or analytical approaches. These models, however, require validation from experimental data to ensure material predictions are accurate. This study compares a semi-analytical micromechanical analysis tool, MAC/GMC, to experimental results of in-situ microscale transverse compression testing conducted at AFRL facilities. Effective properties, stress-strain curves, stress and strain fields, and damage predictions are compared with experimental outputs. Both generalized method of cells (GMC) and high-fidelity generalized method of cells (HFGMC) theories implemented within MAC/GMC show results that agree …
Cold-Formed Steel Strength Predictions For Torsion,
2022
Old Dominion University
Cold-Formed Steel Strength Predictions For Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum
Engineering Technology Faculty Publications
Locally slender open cross-section members are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. Previous direct torsion experiments on lipped channels have shown significant inelastic reserve in limited cases. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. A parametric study is conducted to predict the torsion capacity in locally slender cross-sections. Shell finite element models of lipped Cee and …
Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures,
2022
The British University in Egypt
Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures, Amany G. Micheal Prof., Yehia Bahei-El-Din
Mechanical Engineering
Interrogation of composite structures for inherent damage is investigated implementing three-tier analysis scheme. The analysis starts at the structure level where a general-purpose Finite Element code ABAQUS is employed to obtain the stress field in the second level of analysis that is the composite laminate. A special material routine is prepared to propagate the local fields to the individual plies and hence to the third level of analysis which is the microstructure modelling of the composite. Through the third level of analysis, interface damage between fiber and matrix is checked implementing a certain failure criteria. The interaction between the different …
On The Effect Of Hot Rolling On Inclusion Size And Distribution In A Cast Aisi 1070 Steel Railroad Wheel,
2022
Missouri University of Science and Technology
On The Effect Of Hot Rolling On Inclusion Size And Distribution In A Cast Aisi 1070 Steel Railroad Wheel, Jacob M. Summers, Soumava Chakraborty, Laura Bartlett, Ronald J. O'Malley, Mario F. Buchely, Richard Pilon
Materials Science and Engineering Faculty Research & Creative Works
The goal of this work is to examine the effect of hot deformation on shrinkage porosity and nonmetallic inclusions in an AISI 1070 grade steel industrially produced wheel casting. Steel cleanliness is an important consideration as it influences the mechanical properties of the final product. A high density of porosity and inclusions have been shown to be detrimental for mechanical properties, especially during hot rolling. Using a laboratory-scale rolling mill, cast preforms were subjected to a 66% cumulative reduction to determine the effect of thermomechanical processing on void closure and inclusions that may produce anisotropy in mechanical properties. Quantitative automated …
On The Synthesis And Characterization Of Bimagnetic Coo/Nife2o4 Heterostructured Nanoparticles,
2022
Missouri State University
On The Synthesis And Characterization Of Bimagnetic Coo/Nife2o4 Heterostructured Nanoparticles, Muhammad Sharif Uddin
Graduate Theses/Dissertations
Bimagnetic nanoparticles show promise for applications in energy efficient magnetic storage media and magnetic device applications. The magnetic properties, including the exchange bias of nanostructured materials can be tuned by variation of the size, composition, and morphology of the core vs overlayer of the nanoparticles (NPs). The purpose of this study is to investigate the optimal synthesis routes, structure and magnetic properties of novel CoO/NiFe2O4 heterostructured nanocrystals (HNCs). In this work, I aim to examine how the size impacts the exchange bias, coercivity and other magnetic properties of the CoO/NiFe2O4 HNCs. The nanoparticles with sizes ranging from 10 nm to …
Zinc Plating From Alkaline Non-Cyanide Bath,
2022
Missouri University of Science and Technology
Zinc Plating From Alkaline Non-Cyanide Bath, Abdul J. Mohammed
Masters Theses
“Alkaline non-cyanide zinc plating baths are preferred when trying to avoid the toxicity of cyanide baths or corrosivity of acid baths. Without additives, alkaline zincate baths produce powdery non-adherent deposits which have no use in commercial plating. Additives must be added at optimum concentrations to produce adherent, bright and uniform zinc deposits. In this study electrochemical tests were used to determine effects of additives on cathodic polarization, throwing power and morphology of deposits. Current density distribution in a unique bath of 37.5 g L-1 Zn and 210 g L-1 NaOH was modelled using COMSOL and validated two plating …
Characterization Of Cermet Fuel For Nuclear Thermal Propulsion (Ntp),
2022
Missouri University of Science and Technology
Characterization Of Cermet Fuel For Nuclear Thermal Propulsion (Ntp), James Floyd Mudd
Masters Theses
“A manned flight to Mars is met with many technical challenges, not the least of which is the development of propulsion technology capable of moving a transit vehicle from Earth orbit to Mars orbit. NASA is investigating Nuclear Thermal Propulsion (NTP) as a way of reducing flight time and providing the option for a mid-mission abort. NTP, which uses a high temperature nuclear reactor to heat a propellant, requires advanced fuel materials capable of withstanding temperatures well in excess of 2000 K. Among the fuel options are ceramic metal (cermet) composites composed of refractory metals and Ultra-High Temperature Ceramics (UHTCs). …
Controlling Microalloy Interactions On Precipitation, Hot Ductility, And Microstructure -- Mechanical Property Relationships,
2022
Missouri University of Science and Technology
Controlling Microalloy Interactions On Precipitation, Hot Ductility, And Microstructure -- Mechanical Property Relationships, Madhuri Varadarajan
Masters Theses
“One of the main problems faced in the continuous casting of micro-alloy steels is the formation of transverse cracks. Transverse cracks are surface, or near-surface cracks formed perpendicular to the casting direction. The research focuses on using laboratory hot tensile tests methods to determine the low ductility ranges in high strength steel grades with different micro-alloy additions of titanium, niobium, and vanadium. The hot ductility of commercially produced as-cast slab and beam blank samples was evaluated using two experimental methods: tensile testing utilizing a servo-hydraulic load frame with a resistance furnace and thermomechanical testing using rapid Joule heating. The tests …
Effect Of Thiosulfate On The Passivation Of Zinc-Alloyed Anodes, (Z32120 And Z13000) At 80°C After 288h Immersion In 3.5% Nacl Solution,
2022
Faculty of Engineering
Effect Of Thiosulfate On The Passivation Of Zinc-Alloyed Anodes, (Z32120 And Z13000) At 80°C After 288h Immersion In 3.5% Nacl Solution, Thwelt Thinzar Zaw
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this research, the inhibition of passivation on Zn alloys (Z32120 with Al) and Z13000 without Al) in artificial seawater (3.5% NaCl) mixing with different thiosulfate concentrations (100ppm, 150ppm, 200ppm) were investigated electrochemically after 288h immersion at 80°C and compared the results with that of testing without thiosulfate in the environment. According to the Potentiodynamic polarization test results, it is found that the presence of thiosulfate (S2O32-) in the solution hinders the passivation that was formed during the immersion of Zn alloys between 120h and 288h at 80°C in the absence of thiosulfate. Thiosulfate effect promotes Cl- penetration for not …
Dielectric State Variables As Qualitative Indicators Of Moisture Absorption-Caused Mechanical Property Degradation In Gfrp Composite Structures,
2022
University of Texas at Arlington
Dielectric State Variables As Qualitative Indicators Of Moisture Absorption-Caused Mechanical Property Degradation In Gfrp Composite Structures, Partha Pratim Das, Vamsee Vadlamudi, Rassel Raihan
Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive
Fiber reinforced polymer (FRP) composites are being used in numerous fields owing to their intrinsic strength to weight ratio and various design benefits. However, these materials are prone to environmental aging, particularly moisture absorption. In essence, absorbed moisture infiltrates the polymer matrix and induces changes in the polymer network through chain scission, plasticization, and other bonding interactions. This causes irreversible damages to the material and significantly decreases mechanical strength. In this study, Broadband Dielectric Spectroscopy (BbDS) has been used to identify the absorption mechanisms in glass fiber reinforced polymer (GFRP) composites by detecting the related polarization mechanisms. Here, results show …
Dielectric Analysis To Predict Moisture Absorption In Structural Composites: A Data-Driven Approach,
2022
University of Texas at Arlington
Dielectric Analysis To Predict Moisture Absorption In Structural Composites: A Data-Driven Approach, Partha Pratim Das, Monjur Morshed Rabby, Vamsee Vadlamudi, Rassel Raihan
Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive
Due to continual exposure to moist environment, environmental degradation is a major threat to structural composites throughout their service life. Impedance Spectroscopy (IS)/Broadband Dielectric Spectroscopy (BbDS) is a reliable nondestructive method that has been used in polymer industries for dielectric characterization of material. While moisture absorption causes irreversible changes in the polymer matrix composites, it also alters the electrical properties of the system which is detectable using BbDS. Since the physics that drives the change in electrical characteristics is driven by the modifications imposed by water molecules (whether free or bound), both events can be linked. A dielectric spectrum over …
Coupled Effects In Dielectric And Thermal Properties Of Polymer Matrix Composite Structures Due To Moisture Absorption,
2022
University of Texas at Arlington
Coupled Effects In Dielectric And Thermal Properties Of Polymer Matrix Composite Structures Due To Moisture Absorption, Partha Pratim Das, Monjur Morshed Rabby, Vamsee Vadlamudi, Kenneth Reifsnider, Rassel Raihan
Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive
Fiber reinforced polymer (FRP) composites are being used in number of fields including aerospace, marine, sports, medical, power sectors, etc. due to their lightweight nature while retaining high mechanical performance in terms of high specific strength, stiffness, and great fatigue properties. However, the applicability of these materials is restricted by their stability up to a certain temperature (i.e. glass transition temperature) and environmental degradation (i.e. moisture, UV light, etc.). Moisture ingression greatly reduces their mechanical properties altering material structure by causing polymer plasticization, chain scission and fiber-polymer interface deterioration. These changes instantaneously affect the thermal properties of the materials which …
