Study On Effect Of Nanomodified Additives On Properties Of Concrete Mixtures During Winter Season,
2023
Guangxi Road Construction Engineering Group Co., Ltd., Nanjing, Guangxi 530001, China
Study On Effect Of Nanomodified Additives On Properties Of Concrete Mixtures During Winter Season, Li Yulin, Liang Hongjie, Liang Junlin, Rong Hongliu, Yang Xiaolong
Journal of China & Foreign Highway
To solve the difficult placement of small structures on highways caused by the decreasing workability of cement concrete construction in winter seasons, this paper developed a nanomodified additive to investigate its effect on the performance of cement concrete. Sulfonate naphthaleneformaldehyde (SNF), nanoSiO2, rosin soap (WSR) and sodium nitrate (NaNO3) were formulated into a variety of additives in different ratios and mixing contents to prepare cement concrete, with the fluidity, segregation and compressive strength studied. The results show that the optimal ratio (mass) of nanomodified additives is SNF:0.4%, nanoSiO2:0.1%, WSR:0.05%, and NaNO3:4.0%. The fluidity, segregation and compressive strength of the concrete …
Comparison Of Specifications For Highway Safety Audi Ts Of China ， The United States ， And Australia,
2023
College of Civil Engineering, Hunan University, Changsha, Hunan 410082, China
Comparison Of Specifications For Highway Safety Audi Ts Of China ， The United States ， And Australia, Li Jie, Han Huanhuan, Li Jia, Ren Yabo, Gong Ruiming
Journal of China & Foreign Highway
Traffic safety is one of the three major problems of transportation. To build a transportation power, China has proposed the call of “facilitating the transportation development from pursuing the speed and scale to paying more attention to quality and safety”, and improving the audit specifications of road safety is an important basis for increasing the transportation safety level. This paper firstly introduced the background where China, the United States and Australia issued the audit specifications of road safety, and then compared the differences between the three countries in the aspects of the audit process for road safety, audit indexes and …
Application Of Bim Forward Design In Complex Three-Dimensional Traffic Design Stage,
2023
CCCC First Highway Consultants Co., Ltd., Xi'an, Shaanxi 710075, China
Application Of Bim Forward Design In Complex Three-Dimensional Traffic Design Stage, Wang Bo, Zhu Xinghu, Pei Wangjian, Ge Puta
Journal of China & Foreign Highway
To improve the accuracy and efficiency of complex three-dimensional traffic design, and provide basic digital data for the whole life cycle, this paper researched and investigated the application of BIM technology in the complex three-dimensional traffic design stage by taking the convergence project of the Qianhai section of Shenzhen Coastal Expressway and Nanping Expressway in Guangdong as a case study. Meanwhile, it put forward the BIM forward design schemes for the fields of roads, bridges, and tunnels, carried out secondary development, and built the three-dimensional parametric model, with the design results optimized. Additionally, design analysis and application were conducted to …
Research On Interchange Reconstruction Design Of Minxiao Hub,
2023
CCCC Second Highway Consultants Co., Ltd., Wuhan, Hubei 430056, China
Research On Interchange Reconstruction Design Of Minxiao Hub, Hu Tian, Tan Ximing, Yi Xuebin, Wei Hui
Journal of China & Foreign Highway
Based on the design of the Minxiao hub interchange, this paper analyzed the technical problems of frequent traffic accidents after the initial reconstruction of Minxiao hub interchange, and put forward corresponding reconstruction suggestions. In the interchange design details, the design points about the dual lanes adopting single lanes and speed change lanes only put forward the distance requirement of 60 m for the transition sections, but whether the gradual changes of the travel lanes and hard shoulders are completed in the same road section or not is not clarified. The initial reconstruction of Minxiao hub interchange is designed to complete …
Research On A Hub Interchange Scheme Under Special Terrain Conditions,
2023
Sichuan Communication Surveying & Design Institute Co., Ltd., Chengdu, Sichuan 610000, China
Research On A Hub Interchange Scheme Under Special Terrain Conditions, Wang Jie, He Yajun
Journal of China & Foreign Highway
By combining the study process and conclusion of the interchange scheme of the Lugao hub as an important node of G4216 Jinyang-Ningnan Expressway Project, this paper discussed the ideas and methods of selecting the hub interchange shape under complex terrains and high functional requirements. It aimed to provide certain references for the design of hub interchange schemes in special Y-shaped terrain conditions. The Lugao hub interchange location is deeply cut by the Jinsha River and its branches, with narrow valley bottoms, extremely steep cross slopes, and harsh engineering construction conditions. Meanwhile, in the limited space, the specific requirements of the …
The Role Of Leading-Edge Serrations In Controlling The Flow Over Owls’ Wing,
2023
Coastal Carolina University
The Role Of Leading-Edge Serrations In Controlling The Flow Over Owls’ Wing, Tanner Saussaman, Asif Nafi, David Charland, Hadar Ben-Gida, Roi Gurka
Physics and Engineering Science
We studied the effects of leading-edge serrations on the flow dynamics developed over an owl wing model. Owls are predatory birds. Most owl species are nocturnal, with some active during the day. The nocturnal ones feature stealth capabilities that are partially attributed to their wing microfeatures. One of these microfeatures is small rigid combs (i.e. serrations) aligned at an angle with respect to the incoming flow located at the wings' leading-edge region of the primaries. These serrations are essentially passive flow control devices that enhance some of the owls' flight characteristics, such as aeroacoustics and, potentially, aerodynamics. We performed a …
Graphite And Dispersant Additives For Battery Paste Compositions,
2023
Missouri University of Science and Technology
Graphite And Dispersant Additives For Battery Paste Compositions, Fatih Dogan, Julian Kosacki
Materials Science and Engineering Faculty Research & Creative Works
Various graphite additives were incorporated into the positive battery paste composition to compare their effects on the positive active mass utilization of lead-acid batteries. The disclosure is related to battery paste composition for preparing a lead-acid battery plate comprising a graphite additive selected from the group consisting of globular natural graphite, natural flake graphite, expanded flake graphite, and combinations thereof. The disclosure is also related to a battery paste composition comprising a sodium polymethacrylate dispersant. The disclosure is further related to batteries prepared by these battery paste compositions.
Membrane Functionalization Approaches Toward Per- And Polyfluoroalkyl Substances And Selected Metal Ion Separations,
2023
University of Kentucky
Membrane Functionalization Approaches Toward Per- And Polyfluoroalkyl Substances And Selected Metal Ion Separations, Francisco Cecil Léniz-Pizarro, Holly E. Rudel, Nicolas J. Briot, Julie B. Zimmerman, Dibakar Bhattacharyya
UK CARES Faculty Publications
Adsorption and ion exchange technologies are two of the most widely used approaches to separate pollutants from water; however, their intrinsic diffusion limitations continue to be a challenge. Pore functionalized membranes are a promising technology that can help overcome these challenges, but the extents of their competitive benefits and broad applicability have not been systematically evaluated. Herein, three types of adsorptive/ion exchange (IX) polymers containing strong/weak acid, strong base, and iron-chitosan complex groups were synthesized in the pores and partially on the surface of microfiltration (MF) membranes and tested for the removal of organic and inorganic cations and anions from …
Degredation Of Organic Pollutants In Flocculated Liquid Digestate Using Photocatalytic Titanate Nanofibers: Mechanism And Response Surface Optimization,
2023
University of Arkansas, Fayetteville
Degredation Of Organic Pollutants In Flocculated Liquid Digestate Using Photocatalytic Titanate Nanofibers: Mechanism And Response Surface Optimization, Yiting Xiao, Yang Tian, Yuanhang Zhan, Jun Zhu
Biological and Agricultural Engineering Faculty Publications and Presentations
Titanate nanofibers (TNFs) were synthesized using a hydrothermal method and were employed for the first time in this study to photocatalytically degrade organic pollutants found in flocculated liquid digestate of poultry litter. The photocatalytic performance of TNFs, with a bandgap of 3.16 eV, was tested based on degradation of organic pollutants and removal of color. Five combinations of pollutant concentration and pH were examined (0.2 to 1.3 g·L−1 at pH 4 to 10). Central composite design (CCD) and response surface methodology (RSM) were applied in order to optimize the removal rates of volatile fatty acids (VFA) and chemical oxygen …
Investigation Of Deformation Behavior Of Additively Manufactured Aisi 316l Stainless Steel With In Situ Micro-Compression Testing,
2023
Idaho National Laboratory
Investigation Of Deformation Behavior Of Additively Manufactured Aisi 316l Stainless Steel With In Situ Micro-Compression Testing, Fei Teng, Ching-Heng Shiau, Cheng Sun, Robert C. O'Brien, Michael D. Mcmurtrey
Materials Science and Engineering Faculty Publications and Presentations
Additive manufacturing techniques are being used more and more to perform the precise fabrication of engineering components with complex geometries. The heterogeneity of additively manufactured microstructures deteriorates the mechanical integrity of products. In this paper, we printed AISI 316L stainless steel using the additive manufacturing technique of laser metal deposition. Both single-phase and dual-phase substructures were formed in the grain interiors. Electron backscatter diffraction and energy-dispersive X-ray spectroscopy indicate that Si, Mo, S, Cr were enriched, while Fe was depleted along the substructure boundaries. In situ micro-compression testing was performed at room temperature along the [001] orientation. The dual-phase substructures …
Intrinsic And Atomic Layer Etching Enhanced Area-Selective Atomic Layer Deposition Of Molybdenum Disulfide Thin Films,
2023
Boise State University
Intrinsic And Atomic Layer Etching Enhanced Area-Selective Atomic Layer Deposition Of Molybdenum Disulfide Thin Films, Jake Soares, Wesley Jen, John D. Hues, Drew Lysne, Jesse Wensel, Steven M. Hues, Elton Graugnard
Materials Science and Engineering Faculty Publications and Presentations
For continual scaling in microelectronics, new processes for precise high volume fabrication are required. Area-selective atomic layer deposition (ASALD) can provide an avenue for self-aligned material patterning and offers an approach to correct edge placement errors commonly found in top-down patterning processes. Two-dimensional transition metal dichalcogenides also offer great potential in scaled microelectronic devices due to their high mobilities and few-atom thickness. In this work, we report ASALD of MoS2 thin films by deposition with MoF6 and H2S precursor reactants. The inherent selectivity of the MoS2 atomic layer deposition (ALD) process is demonstrated by growth …
Optimizing Mn-Al Permanent Magnet Performance Through Control Of The Phase Transformation, Ternary Element Addition, And Advanced Processing,
2023
Dartmouth College
Optimizing Mn-Al Permanent Magnet Performance Through Control Of The Phase Transformation, Ternary Element Addition, And Advanced Processing, Thomas R. Keller
Dartmouth College Ph.D Dissertations
The growing need for electrical power in machines and vehicles brings with it a growing need for critical materials. The current high-performance permanent magnets (PMs) based on rare-earth (RE) elements Nd and Sm cannot escape the problem of raw material cost, geographic scarcity in the earth’s crust, and lack of circular global supply chains. This poses a problem of industrial ecology: can PMs be made from inexpensive, more abundant materials while still meeting sufficient performance criteria? PMs based on the magnetic τ phase of Mn-Al offer a possible alternative to REPMs. However, years of innovation have not yet achieved real-world …
Construction And Performance Optimization Of Bioconjugated Nanosensors For Early Detection Of Breast Cancer And Pro-Inflammatory Diseases,
2023
CUNY Graduate Center
Construction And Performance Optimization Of Bioconjugated Nanosensors For Early Detection Of Breast Cancer And Pro-Inflammatory Diseases, Pooja Gaikwad
Dissertations, Theses, and Capstone Projects
In recent years, nanosensors have emerged as a tool with strong potential in medical diagnostics. Single-walled carbon nanotube (SWCNT) based optical nanosensors have notably garnered interest due to the unique characteristics of their near-infrared fluorescence emission, including tissue transparency, photostability, and various chiralities with discrete absorption and fluorescence emission bands. Additionally, the optoelectronic properties of SWCNT are sensitive to the surrounding environment, which makes them suitable for in vitro and in vivo biosensing. Single-stranded (ss) DNA-wrapped SWCNTs have been reported as optical nanosensors for cancers and metabolic diseases. Breast cancer and cardiovascular diseases are the most common causes of death …
Establishing Physical And Chemical Mechanisms Of Polymerization And Pyrolysis Of Phenolic Resins For Carbon-Carbon Composites,
2023
Michigan Technological University
Establishing Physical And Chemical Mechanisms Of Polymerization And Pyrolysis Of Phenolic Resins For Carbon-Carbon Composites, Ivan Gallegos, Josh Kemppainen, Jacob R. Gissinger, Malgorzata Kowalik, Adri Van Duin, Kristopher E. Wise, S. Gowtham, Gregory Odegard
Michigan Tech Publications
The complex structural and chemical changes that occur during polymerization and pyrolysis critically affect material properties but are difficult to characterize in situ. This work presents a novel, experimentally validated methodology for modeling the complete polymerization and pyrolysis processes for phenolic resin using reactive molecular dynamics. The polymerization simulations produced polymerized structures with mass densities of 1.24 ± 0.01 g/cm3 and Young's moduli of 3.50 ± 0.64 GPa, which are in good agreement with experimental values. The structural properties of the subsequently pyrolyzed structures were also found to be in good agreement with experimental X-ray data for the phenolic-derived carbon …
Carbohydrates Generated Via Hot Water As Catalyst For Co2 Reduction Reaction,
2023
Shanghai Jiao Tong University
Carbohydrates Generated Via Hot Water As Catalyst For Co2 Reduction Reaction, Yang Yang, Heng Zhong, Jiong Cheng, Yun Hang Hu, Richard Lee Smith Jr, Fangming Jin
Michigan Tech Publications
Combining terrestrial biomass with submarine-type hydrothermal environments for CO2 reduction is a possible approach for realizing new energies while achieving sustainable circulation of carbon. Herein, carbohydrateenabled CO2 reduction based on NaHCO3 conversion to formate revealed that hydrothermal environments facilitated direct hydrogen transfer from carbohydrates (glucose, cellulose) to CO2/NaHCO3 with hot water (250–300 °C, 5–20 MPa) acting as homogeneous catalyst in absence of any conventional catalysts giving CO2/ NaHCO3 reduction efficiencies as high as 76% for cellulose. Time-resolved operando hydrothermal DRIFTS spectra of glycolaldehyde in hot water (250 °C, autogenous pressure) verified that water catalyzed NaHCO3 reduction by converting the -CHO …
Data-Driven 2d Materials Discovery For Next-Generation Electronics,
2023
New Jersey Institute of Technology
Data-Driven 2d Materials Discovery For Next-Generation Electronics, Zeyu Zhang
Dissertations
The development of material discovery and design has lasted centuries in human history. After the concept of modern chemistry and material science was established, the strategy of material discovery relies on the experiments. Such a strategy becomes expensive and time-consuming with the increasing number of materials nowadays. Therefore, a novel strategy that is faster and more comprehensive is urgently needed. In this dissertation, an experiment-guided material discovery strategy is developed and explained using metal-organic frameworks (MOFs) as instances. The advent of 7r-stacked layered MOFs, which offer electrical conductivity on top of permanent porosity and high surface area, opened up new …
Investigating The Rheological Behavior Of A Simple Yield Stress Fluid Under Shear Flows,
2023
New Jersey Institute of Technology
Investigating The Rheological Behavior Of A Simple Yield Stress Fluid Under Shear Flows, Francesco Accetta
Theses
Many soft materials display unique and complex rheological behavior characterized by a transition from a solid-like to a fluid-like state upon the application of a force that exceeds the threshold to flow, known as the yield stress. Yield stress fluids are found in a wide range of commonly encountered materials including microgels, emulsions, and foams, and have been widely studied by rheologists over the last several decades. Carbopol is a popular polymeric microgel system as it displays simple, non-thixotropic rheological behavior and is typically seen as an ideal yield stress fluid. Previous research has demonstrated the reproducible behavior of shear …
Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility,
2023
Department of Industrial Engineering, Faculty of Engineering, Universitas Mercu Buana, Jakarta Barat 11650, Indonesia
Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo
Makara Journal of Technology
Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …
Large-Scale Cascading Of First-Order Fbg Array In A Highly Multimode Coreless Fiber Using Femtosecond Laser For Distributed Thermal Sensing,
2023
Missouri University of Science and Technology
Large-Scale Cascading Of First-Order Fbg Array In A Highly Multimode Coreless Fiber Using Femtosecond Laser For Distributed Thermal Sensing, Farhan Mumtaz, Bohong Zhang, Ronald J. O'Malley, Jie Huang
Electrical and Computer Engineering Faculty Research & Creative Works
This research focuses on the performance analysis and characterization of a fiber Bragg gratings (FBGs) array, consisting of 10 first order FBGs inscribed by a femtosecond (FS) laser in a highly multimode coreless fiber. The study evaluates the FBG array's ability to function as a distributed thermal sensing (DTS) platform, with the coreless fiber chosen as the sensing element due to its immunity to dopant migration at high temperatures. The design of a large cascaded first-order FBG array effectively eliminates unwanted harmonic peaks across a wide spectrum range. In contrast, higher-order FBGs introduce limitations due to the overlapping of Bragg …
Synthesis And Evaluation Of Organic Additives For Copper Electroplating Of Interconnects,
2023
School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, Sichuan, China
Synthesis And Evaluation Of Organic Additives For Copper Electroplating Of Interconnects, Yue-Hui Zhai, Yi-Xiao Peng, Yan Hong, Yuan-Ming Chen, Guo-Yun Zhou, Wei He, Peng-Ju Wang, Xian-Ming Chen, Chong Wang
Journal of Electrochemistry
Copper interconnects are essential to the functionality, performance, power efficiency, reliability, and fabrication yield of electronic devices. They are widely found in chips, packaging substrates and printed circuit boards, and are often produced by copper electroplating in an acidic aqueous solution. Organic additives play a decisive role in regulating copper deposition to fill microgrooves, and micro-vias to form fine lines and interlayer interconnects. Generally, an additive package consists of three components (brightener, suppressor, and leveler), which have a synergistic effect of super-filling on electroplating copper when the concentration ratio is appropriate. Many works of literature have discussed the mechanism of …
