Materials Science and Engineering Commons^™

Enhanced Optical And Infrared Activity Of Nanosphere Dimers Attributed To Dimer Geometry, D. Keith Roper, Jin-Woo Kim, Ricardo R. Romo, Joseph Batta-Mpouma

Biological and Agricultural Engineering Faculty Publications and Presentations

Enhanced optical and infrared activity of subwavelength metal nanoparticles is key to their use in optoelectronics, spectroscopy, and sensing. The present work compared spectra of nanosphere dimers merged by centrifuging gold nanospheres with corresponding simulated nanoscale dimers. Geometric features of the nanosphere dimers were related to corresponding optical and near-infrared activity through simulation. Differences in optical and infrared activity of the nanosphere dimers were largely attributable to changes in the radius of the nanosphere and the radius of the conductive junction between merged nanospheres. The features observed in the experimental spectra were attributed to a select number of dimers exhibiting …

Exploring The Synthesis Of Biobased And Chemically Recyclable Polysulfone Using Imine Chemistry, Vitasta Jain

All Dissertations

Plastic waste poses a major problem because of the chemical stability of these materials, leading to their accumulation in the environment and the leaching of toxic chemicals during their slow decomposition. Additionally, the use of depleting petroleum reserves for synthesis has made for an unsustainable production and risks due to use of chemicals hazardous to the environment and the individuals exposed to it.

To address these concerns, researchers have explored biobased feedstock and incorporating chemical recycling capabilities for a closed loop, sustainable process. One promising feedstock is lignin with its abundant functional groups that can be modified and utilized to …

Molecular Beam Epitaxy Of Gesn On Iii-V Substrates For Photonic Applications, Calbi Gunder

Graduate Theses and Dissertations

This dissertation explores the advancement of germanium-tin (GeSn) as a tuneable narrow bandgap material, crucial for the development of high-efficiency photodetectors and laser devices in near- and mid-infrared technologies. We investigate the synthesis challenges, particularly the lattice mismatch between GeSn alloys and substrates, which significantly affects their crystalline and optical qualities. Through molecular beam epitaxy, we examine the growth of Ge and GeSn on GaAs (001) substrates, employing Ge/GaAs and Ge/AlAs buffer layers to investigate these challenges. Our findings, characterized by X-ray diffraction, atomic force microscopy, reflection high-energy electron diffraction, and photoluminescence, demonstrate the production of high-quality Ge layers, achieving …

Computational Studies Of Charge-Transfer Mechanisms In Electrochemical Materials, Mohammadreza Reza Nouri

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Understanding charge transfer mechanisms of electrochemical reactions is critical for advancing a variety of electrochemical energy storage and conversion technologies such as water electrolysis, fuel cells, and batteries. (Photo)electrochemical water splitting, involving OER at the anode and HER at the cathode, presents an environmentally friendly way of storing energy from renewable sources in the form of pure hydrogen. While a lot of emphasis has been placed on developing highly active and stable OER/HER catalysts, our atomic-level understanding of the underlying charge transfer mechanisms falls behind.

In this work, we focus on both Faradaic and non-Faradaic charge transfer mechanisms to investigate …

Physics-Informed Machine Learning Methods For Inverse Design Of Multi-Phase Materials With Targeted Mechanical Properties, Yunpeng Wu

All Dissertations

Advances in machine learning algorithms and applications have significantly enhanced engineering inverse design capabilities. This work focuses on the machine learning-based inverse design of material microstructures with targeted linear and nonlinear mechanical properties. It involves developing and applying predictive and generative physics-informed neural networks for both 2D and 3D multiphase materials.

The first investigation aims to develop a machine learning method for the inverse design of 2D multiphase materials, particularly porous materials. We first develop machine learning methods to understand the implicit relationship between a material's microstructure and its mechanical behavior. Specifically, we use ResNet-based models to predict the elastic …

On The Structure, Energy, And Segregation Behavior Of Grain Boundaries In Metallic Systems, Yasir Mahmood

All Dissertations

Nearly all structural metallic systems are multi-component polycrystalline aggregates; their microstructures are composed of crystalline grains that are internally joined at grain boundaries (GBs). This thesis focuses on GB structure, energy, and chemistry, as these greatly influence many material properties and processes, including boundary dynamics during processing treatments or under operating conditions.

Using atomistic simulations, we examine the impact of metastable GB structures on solute segregation. A wide range of GB geometries and metastable structures are used in our study. The Al-Mg alloy is used because it is of interest for light weighting. The atomistic simulation results are used to …

Investigating Near-Field Radiative Heat Transfer With Titanium Carbide Mxenes And Slanted Columnar Thin Films, Sean Luke Murray

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work investigates the mechanisms to manipulate and control the magnitudes of Near-Field Radiative Heat Transfer (NFRHT) using two-dimensional materials and nanostructured surfaces. NFRHT occurs when the geometrical features of the radiating objects or the separation distance between interacting bodies are comparable to or lower than the characteristic thermal radiation wavelength. NFRHT magnitudes surpass the blackbody limit by several orders of magnitude due to phenomena such as photon tunneling and new modes of energy transfer, like surface polaritons. Therefore, it is crucial to understand how material properties and surface nanostructures affect NFRHT.

The first part of this work examines the …

Synergistic Strategies In Hybrid Mxed Matrix 3d Printing Of Thermoplastics & Thermosets: Design, Manufacturing, And Materials Development., Saleh Akram Khanjar

Electronic Theses and Dissertations

Composite manufacturing and mixed matrix structures have been produced using traditional manufacturing processes for various industrial applications due to their high mechanical properties to material weight and cost ratio. However implementation of composite and mixed matrix manufacturing with advanced manufacturing such as additive manufacturing is limited due to the hardware limitations of current 3d printing technologies and materials available for 3D printing applications. This work has developed and investigated a new hybrid 3D printing manufacturing process utilizing a variety of material systems (thermoplastic – thermoset, thermoplastic – thermoplastic, thermoset – thermoset, thermoplastic – thermoplastic – thermoset). This study developed thermoplastic …

Development And Processing Of Shape Memory Polymer Composites (Smpcs) For Application In Structural Robotics And Robotic Sensors., Kavish Sudan

Electronic Theses and Dissertations

Shape Memory Polymers (SMPs) have attracted significant attention since their introduction in the 1980s due to their remarkable ability to regain their original shape from a temporarily deformed state when exposed to an external stimulus, typically heat. This shape memory effect, driven by thermal transitions such as the glass transition temperature (T_g) or melting temperature (T_m), has made SMPs highly attractive for applications in soft robotics, aerospace, and biomedical devices. However, SMPs face challenges such as limited mechanical strength, thermal stability, and electrical conductivity, which hinder their broader adoption in advanced applications. To address these challenges, …

Development Of Iii-V And Iv Epitaxy On Sapphire Technology, Emmanuel Wangila

Graduate Theses and Dissertations

This research presents comprehensive insights into the epitaxial growth of germanium (Ge) on c-plane sapphire substrates using molecular beam epitaxy (MBE). The direct growth of Ge on sapphire typically yields three-dimensional (3D) Ge islands with diverse growth directions, multiple primary domains, and twinned crystals. However, incorporating a thin AlAs nucleation layer proves instrumental in enhancing surface and material quality. With a 10 nm AlAs layer, the achieved surface exhibits improved characteristics, including a smoother surface, single epitaxial orientation, sharper rocking curve, and a single domain. This study surpasses previous works by achieving a single primary domain and reducing twinning. Furthermore, …

Engineering The Properties Of Magnesium Aluminate Spinel Through Solid State Solutions, Robin Conner

All Theses

Magnesium aluminate spinel solid state solutions were prepared via the coprecipitation method and calcined in air at 900 °C for 2 h. The manipulation of magnesium aluminate spinel’s microstructure through the formation of solid state solutions with zinc and gadolinium substituting for magnesium was investigated. X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR FTIR) confirmed the formation of a single cubic crystalline phase. The luminescence properties were investigated by radioluminescence (RL) under X-ray excitation and thermoluminescence (TL) measurements. In the case of zinc, all concentrations of the solid state solutions showed similar luminescence with bands at …

Settingsorder Article Reprints Open Accessarticle A Model To Account For The Effects Of Load Ratio And Hydrogen Pressure On The Fatigue Crack Growth Behavior Of Pressure Vessel Steels, Ashok Saxena, Kip O. Findley

Mechanical Engineering Faculty Publications and Presentations

A phenomenological model for estimating the effects of load ratio R and hydrogen pressure P_H2 on the hydrogen-assisted fatigue crack growth rate (HA-FCGR) behavior in the transient and steady-state regimes of pressure vessel steels is described. The "transient regime" is identified with crack growth within a severely embrittled zone of intense plasticity at the crack tip. The "steady-state" behavior is associated with the crack growing into a region of comparatively lower hydrogen concentration located further away from the crack tip. The model treats the effects of R and P_H2 as being functionally separable. In the transient …

Synthesis Of Silica-Encapsulated Myristic Acid Phase-Change-Assisted Nanocapsules For Thermal Management Applications, Muhammad Ghufran, David Huitink

Mechanical Engineering Faculty Publications and Presentations

Myristic acid-based silica (MA/SiO₂) nano-encapsulated phase change materials (NePCMs) were synthesized by the sol–gel process. Five different samples of the MA/SiO₂ nanocapsules were prepared by varying the mass of the myristic acid. The nanocapsules were characterized by Fourier transform infrared spectrophotometer (FTIR), X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), energy dispersive X-ray (EDX), and dynamic light scattering (DLS). These characterization techniques confirmed the successful encapsulation of the myristic acid inside the silica shell. The maximum latent heat was found to be 114.46 J/g for the sample which was prepared with 25 g myristic …

High-Quality Single-Step Growth Of Gaas On C-Plane Sapphire By Molecular Beam, Emmanuel Wangila, Calbi Gunder, Mohammad Zamani-Alavijeh, Fernando Maia De Oliveira, Serhii Kryvyi, Aida Sheibani, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Physics Faculty Publications and Presentations

We report on the growth of high-quality GaAs semiconductor materials on an AlAs/sapphire substrate by molecular beam epitaxy. The growth of GaAs on sapphire centers on a new single-step growth technique that produces higher-quality material than a previously reported multi-step growth method. Omega-2theta scans confirmed the GaAs (111) orientation. Samples grown at 700 °C displayed the highest crystal quality with minimal defects and strain, evidenced by narrow FWHM values of the rocking curve. By varying the As/Ga flux ratio and the growth temperature, we significantly improved the quality of the GaAs layer on sapphire, as compared to that obtained in …

Chemical Recycling Of Bio-Based Polyurethane Foams: Evaluating Bio-Based Glycols In Comparison To Petroleum-Based Glycols, Anirudh Thorbole Mr.

Electronic Theses & Dissertations

The paradigm shift towards bio-based polyurethane foams (bio-PUF) has significantly increased post-consumer waste. To address this issue, this research represents a novel approach to enhance sustainable development in the recycling industry by replacing traditional petroleum-based glycols with sustainable bio-based alternatives. This study explores the glycolysis of bio-PUF using bio-based SG-522 glycol and polyethylene glycol (PEG) for comparison. The findings from this research as outlined, reveal no significant differences in depolymerization time between the two glycols, achieving proper depolymerization and high recovery yields of over 95% after solvent purification. Comprehensive FT-IR and NMR analyses confirmed the successful degradation of bio-PUF and …

Metal Casting Furnace Design Development Using Computer Simulation, Ramadhan Wahyu Irianto, Yanuar R.A. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Metal foundries still rely heavily on crucible furnaces. The current furnace design, which is currently being used by the partner industry, has been found to be not properly designed and will result in a reduction in efficiency. CFD simulation will be used to find the optimal melting furnace design. This research simulation consists of 3 stages: pre-processing, solving, and post-processing. There are two furnace geometries, cylindrical and hexagonal, while the burner location will be divided into 3 positions, namely P1, P2, and P3. The most optimal furnace design will be used as a basis for the verification testing process. The …

Evolution Of Residual Stress, Crystal Orientation, And Texture On Preheating Weld Treatment Of Low Carbon Steel Astm A572 Grade 42, Suratno Adi Saputro, Andoko Andoko, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Preheating is one type of heat treatment on the material prior to starting the welding process by increasing the temperature of the material. It is used to reduce the cooling rate during the welding processes to minimize the risk of residual stress and cracking during welding. Besides the benefits of welding, it also has a negative impact, especially on the integrity of the material, because the heating process at high temperatures will cause residual stress, which will affect the mechanical properties, chemical composition, and microstructure of the material, especially on Heat Affected Zone (HAZ). This study aims to analyze the …

Static And Modal Analysis Of A Box Structured Satellite Deployment Mechanism With Self-Actuated Torsion Joint, Dongping Sheng, Renzhe Ma, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

A brand-new satellite deployment mechanism with boxed structure and self-actuated torsion joints is proposed and an effective method to verify the feasibility of this mechanism is established in this paper. This mechanism has the characteristics of high base frequency, high ratio of deployed and folded space occupation ratio. In order to meet the design requirements, the related analysis and optimization need to be conducted, and several conclusions are obtained. Firstly, the modal analysis of deployment mechanism at folded and fully deployed state is analyzed, and the result showed that the proper wall thickness is the key parameter to satisfy the …

A Review Of Fault Detecting Devices For Belt Conveyor Idlers, Fahad Alharbi, Suhuai Luo

Journal of Mechanical Engineering Science and Technology (JMEST)

The shift towards automated inspection methods represents considerable progress in conveyor system maintenance, enhancing safety and efficiency while posing challenges in data analysis and implementation costs. This study critically analyses sensor technologies and inspection methods for detecting faults in conveyor belt idlers, highlighting their essential role in preserving the operational integrity of industrial conveyor systems. By synthesizing various research findings, the study assesses the effectiveness of different sensor devices in identifying defects, including built-in sensors, fixed sensor options like acoustic, ultrasonic sensors, cameras, accelerometers, and Distributed Optical Fibre Sensors (DOFS), as well as mobile sensor systems. Our findings emphasize the …

Analysis Of Avgas Fuel Spraying Schemes Using The Ansys Application Approach, Dimas Endrawan Putra, Nasrul Ilminnafik, M Fahrur Rozy Hentihu, Muh. Nurkoyim Kustanto, Danang Yudistiro, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

Avgas fuel consumption on Cessna trainer aircraft is very high. However, there has been little research regarding spray impacts in Cessna aircraft engines. The phenomenon of avgas spray colliding with the cylinder wall may occur during fuel injection, resulting in a changed spray radius and height, which will affect the mixing of fuel and air. In several aspects, this affects engine performance and exhaust emissions on Cessna aircraft. This research aims to determine and study the phenomenon of spray impact on avgasfueled aircraft engines. The fuel spray in the study occurred in the combustion chamber using pressure from a fuel …