Electrical and Electronics Commons^™

A Plastic Encapsulated Wireless Sensor Module For Monitoring Of Medical Steam Sterilisers, Jinto George

Theses

Steam sterilisation is a process of removing or killing living organisms from medical equipment using saturated steam in a steriliser at 134°C and 3 bar pressure. Monitoring of the steriliser is very important to verify whether the sterilisation cycle is adequate or not. In current practice, hospitals widely use chemical or biological indicators for monitoring the performance of the sterilisation cycle but these are simple pass/fail monitors and do not allow continuous monitoring. This thesis presents design and development of a real time wireless sensing module (WSM) for monitoring the sterilisation cycle which can be used to replace existing chemical …

Performance Evaluation And Improvement Of Wireless Amplify-And-Forward Cooperative-Based Systems Under Nodes Mobility And Imperfect Csi Estimation Impacts, Yazid Khattabi

Electronic Theses and Dissertations

Cooperative communication techniques have been introduced in wireless networks to achieve spacial diversity-gain via the readiness of multiple users (via relays) to assist a source forwarding its data to a final destination. Cooperative communication techniques have shown their capability in improving system reliability and extending coverage area, and hence, it is believable that they will act as a promising technology for the coming fifth-generation (5G). Nevertheless, most existing work reported in literature on performance studies of wireless cooperative-based systems are based on the assumptions that the multipath fading channels among systems cooperating nodes are quasi-static (i.e., fading channels coefficients are …

Influence Of Neural Network Training Parameters On Short-Term Wind Forecasting, Adel Brka, Yasir M. Al-Abdeli, Ganesh Kothapalli

Research outputs 2014 to 2021

This paper investigates factors which can affect the accuracy of short-term wind speed prediction when done over long periods spanning different seasons. Two types of neural networks (NNs) are used to forecast power generated via specific horizontal axis wind turbines. Meteorological data used are for a specific Western Australian location. Results reveal that seasonal variations affect the prediction accuracy of the wind resource, but the magnitude of this influence strongly depends on the details of the NN deployed. Factors investigated include the span of the time series needed to initially train the networks, the temporal resolution of these data, the …

Digital Processes And Characterization For Fabricating 3d Rf Devices, Harvey Hing Tsang

Open Access Theses & Dissertations

In this work, co-planar waveguides (CPW) are fabricated and characterized with low temperature 3D printed materials for flexible electronic applications. Laser processing is introduced to reduce heating and cooling times for curing and subtractive manufacturing. CPWs are optimized by varying printing resolution, adjusting curing conditions and shaping conductor profile with a pico-laser. By using acrylonitrile butadiene styrene (ABS) as substrate material and Dupont CB028 as conductive material, a high S21 and low S11 CPW is fabricated. Optimized direct write methods are dispensed onto 3D complex structures to move away from 2.5D style printing and move into true 3D printed antenna …

Cdte Doped With Zn Grown On Si(111) And Si(211) Using The Closed Space Sublimation Method, Jose Alberto Valdez

Open Access Theses & Dissertations

Cadmium telluride (CdTe) doped with zinc (Zn) has been used for the fabrication of X-ray imaging devices. CdTe allows the device to have the same image quality at a lower X-ray dose. When silicon is used as a substrate for CdTe growth, this reduces the cost and allows the readout circuitry to be fabricated on the same substrate. However, material quality and device performance needs to be addressed since the lattice parameters of CdTe (6.482 Å) and Si (5.431 Å) result in a 19% lattice mismatch.

In this work, CdTe doped with Zn is deposited on Si (211) and Si …

Information Entropy Measures Applied To Hierarchial Complex Technical And Socio-Technical Systems, Satya Aditya Akundi

Open Access Theses & Dissertations

A significant increase of Systems-of-Systems (SoS) is currently observed in the social and technical domains. With increasing constituent components, Systems of Systems are becoming larger and more complex. Recent research efforts have highlighted the importance of identifying innovative statistical approaches for analyzing complex systems to better understand how they work. This research is aimed towards developing an Information Entropy based framework to analyze complex technical and social systems. Entropy in terms of information theory can be seen as the expected amount of information observed in an event. A parallel can be drawn between information entropy and system complexity, where, as …

Dielectric Prism Antenna, Jose Antonio Avila

Open Access Theses & Dissertations

3D printing is revolutionizing the development and manufacturing of devices. Currently multi-material 3D printing, like metals plus dielectrics, is in the early stages and not very accessible. This work set out to develop an all-dielectric antenna that could be 3D printed with current widely accessible 3D printing technologies. The antenna developed is an all-dielectric ultra-thin antenna with a simple geometry. The antenna radiates by using total internal reflection and a circulating mode operating as a leaky whispering gallery mode. We are calling the antenna the dielectric prism antenna because it acts like an optical prism. The dielectric prism antenna was …

Reliable And Secure Scada Framework For Residential Microgrid Communications, Goutham Krishna Chalamasetty

Open Access Theses & Dissertations

Cyber security is one of the major needs for electric power industry like many other industries and organizations. The advancements in technology provide numerous benefits to power industry as well as benefits cyber attackers to perform different cyber-attacks on the industry. Power system is a complex physical entity that deals with power generation, distribution, and transmission. In general, no individual or company or an organization can bear a one hour power cut, which shows the need for reliability in electric power industry.

In order to develop a reliable and secure Supervisory Control and Data Acquisition (SCADA) communication network, this Thesis …

Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez

Open Access Theses & Dissertations

The objective of this research is to design and analyze the performance of a new mechanism to improve the advising of students in a nontraditional environment. This nontraditional environment includes: a minority serving, commuter campus with a high percentage of transfer students. Specifically, these demographics are unable to keep a tightly controlled cohort of students flowing through to the completion of the curriculum. Students in these circumstances usually have varied course loads and competing priorities due to family and financial needs or other societal responsibilities. Therefore, there is a need for an individualized approach to advising.

University administrations face challenges …

Modeling Of Piezoelectric Traveling Wave Rotary Ultrasonic Motors With The Finite Volume Method, Ivan Arturo Renteria Marquez

Open Access Theses & Dissertations

In 1983 Toshiiku Sashida developed a new motor concept called Piezoelectric Traveling Wave Rotary Ultrasonic Motor (PTRUSM). The advantages of these motors include high torque at low speed, absence of a generated magnetic field, and high potential for miniaturization. Unfortunately PTRUSMs have some disadvantages that limit the areas of applications for these types of motors. The disadvantages are a short operating life (about 1000 hours), small output power, and the need of a complex motor controller.

On one hand, these motors have been used in satellites, mobile phones, photocopiers, robotic arms, telescopes, automobiles, and camera autofocusing. On the other hand, …

G-Code Generation For Multi-Process 3d Printing, Callum Peter Bailey

Open Access Theses & Dissertations

Since the inception of stereolithography in the 1980s, interest in 3D printing has exploded, with desktop 3D printers now commercially accessible to the general public. In recent years, next-generation multifunctional technologies have been developed, which combine 3D printing with other technologies such as wire embedding, foil embedding, CNC machining, and robotic component placement, enabling complex parts to be made on a single multifunctional machine.

However, the complexity of these integrated processes exceeds the capabilities of established design tools. To this end, this Thesis aims to develop a multi-functional design solution that can automatically generate final control code for next-generation multifunctional …

Touch And Step Potential Analysis At 23.9kv To 4.16kv & 13.8kv To 4.16kv Distribution Substations With Pad-Mounted Transformers, Floating Grounds, And Other Exposed Ungrounded Metal Bodies Using Winigs, David Guillermo Guzman

Open Access Theses & Dissertations

An electrical substation is composed of various subsystems that allow for the effective and safe operation of the power grid. One of the subsystems integrating a conventional substation is defined as the ground grid system. This system allows for the effective operation of the power grid and all the electrical equipment connected to it by providing a ground potential reference, commonly known as the system ground. In addition, the ground grid system provides safety to the workers and the public transiting inside or living nearby a substation by reducing the step and touch potential (or voltage) levels present during a …

The Viability Of High-Frequency Oscillation Analysis In Eeg Signals For Seizure Prediction, Bryan David Kern

Open Access Theses & Dissertations

Seizure prediction is a decades-old research problem that has yet to reach any satisfying conclusions. Many studies have tackled the problem with varying results, but there has yet to be any major breakthroughs that define the direction of all future research. However, a promising, new predictor may have presented itself in recent years in the form of high frequency oscillations (HFOs). With the discovery of HFOs (80 - 800 Hz) as a biomarker for epilepsy, new interest has been placed in studying the high frequency content of EEGs to find a possible link between epilepsy and HFOs. In this paper, …

Switchless Reconfigurable Antenna With 360° Steering, Adam Narbudowicz, Max Ammann, Dirk Heberling

Conference Papers

—A novel reconfigurable antenna capable of rotating a bidirectional pattern by 360◦ in azimuth is proposed. The antenna has two ports, no aperture switching components, and offers a more compact solution than an array. It provides a reconfigurable pattern in the band 2.525–2.595 GHz and a fixed omnidirectional pattern from 2.235 to 2.725 GHz. The measured gains for four investigated configurations are between 2.1 and 3.1 dBi with total efficiencies between 80% and 89%. The antenna is intended to operate with software defined radio [digital beamforming or multiple-input–multiple-output (MIMO)], where the potential of pattern generation using the dual-port antenna can …

A Different Type Of Lighting Research: A Qualitative Methodology, Kevin Kelly

Articles

As lighting researchers we can learn from our colleagues in the humanities who have progressed Qualitative Research methods to a high level of rigour. We should consider using Qualitative Research Methods more. Such methods allow exploration of complex issues involving human behaviour and facilitate researchers to address difficult to answer questions that otherwise go unanswered. Good quality Qualitative Research can provide rich explanations of what went on in a given situation. Validity and Reliability are considered differently with this type of research methodology. This paper attempts to identify when qualitative research is appropriate, what questions it can answer in lighting …

Electricity Sector Reform: Sourcing And Cost Management Of Electricity For Steel Manufacturing In Nigeria, Christopher Ndubuisi Okonkwo

Walden Dissertations and Doctoral Studies

In 2014, Lazard levelized cost of energy analysis model priced diesel powered systems at $0.225 – $0.404/KWh and a range of $0.165 – $0.242/KWh for gas-powered systems. The model gave a range of $0.28 – $0.33/kWh for diesel and a range of $0.14/kWh – $0.16/kW for gas fired. Nigeria has an abundance of gas reserves, but heavy gas flaring by oil companies perpetuates power failure across Nigeria. What has resulted is an unreliable electricity infrastructure and a high cost of alternative energy. The Electricity Power Sector Reform Act of 2005 started the reform process. Guided by decision theory, the purpose …

Titan Wireless Camera Control System, Matthew J. Trowbridge, Ian Drake, Samuel Davis, Ognjen Krco

Williams Honors College, Honors Research Projects

The Titan Camera Control System is an eletromechanical device that allows the user to wirelessly control a camera’s digital operations as well as physical orientation through the use of a mobile device application. The Titan system accepts input in the form of virtual user commands on the mobile app and performs system output in the form of sending photos/video from the camera back to the app as well as changing the orientation of the camera in accordance with the user’s commands.

Roobockey "Autonomous Hockey Robot", Keith R. Martin, Troy W. Bowers, Deboshri Sadhukhan, John A. Supel

Williams Honors College, Honors Research Projects

The goal of the ROOBockey project is to design and construct a floor hockey robot that can competitively shoot a puck. The robot design quickly locates a specific beacon through the use of image processing and uses a pneumatic shooting mechanism to send a puck to a specified target. The beacons act as possible player or goal positions in a hockey game. The robot also utilizes a wireless controller device to allow a user to maneuver the robot across a hockey field.

Estimating Local Average Power In A Line-Of-Sight Indoor Channel: Spatial Sampling And Processing, Israt Jahan Disha

Theses and Dissertations

Modeling of indoor radio channels has been a dynamic area of research in recent years because of the increasing demand for indoor wireless communications. In order to efficiently deploy such indoor systems, a good knowledge of the indoor wireless channel’s characteristics are required. One important characteristic is an accurate propagation path loss model. For developing such models various measurements have been carried out. In modeling propagation path loss in complex indoor environments, accurate and fast algorithms for estimating the local mean signal level are essential; these are also of use for power control and handoff decisions. These local mean power …

High Gain Pattern Reconfigurable Antenna Arrays For Portable And Body-Centric Wireless Applications, Nowrin Hasan Chamok

Theses and Dissertations

Wireless devices such as smartphones, tablet computers, smartwatches etc. have become ubiquitous. With that, the demand for high speed data has increased tremendously. Designing antennas for such applications is challenging because of limited availability of space, shadowing or blockage from the human body, and signal loss from multipath fading. Conventional broad, fixed beam low gain antennas result in poor reception, faster battery drainage, and low data rate. Compressed footprint high gain pattern reconfigurable antenna arrays can solve these problems which is the focus of this dissertation. Two innovative high gain pattern reconfiguration techniques, the switched beam parasitic array and the …