Electrical and Electronics Commons^™

Hexarray: A Novel Self-Reconfigurable Hardware System, Fady Hussein

Boise State University Theses and Dissertations

Evolvable hardware (EHW) is a powerful autonomous system for adapting and finding solutions within a changing environment. EHW consists of two main components: a reconfigurable hardware core and an evolutionary algorithm. The majority of prior research focuses on improving either the reconfigurable hardware or the evolutionary algorithm in place, but not both. Thus, current implementations suffer from being application oriented and having slow reconfiguration times, low efficiencies, and less routing flexibility. In this work, a novel evolvable hardware platform is proposed that combines a novel reconfigurable hardware core and a novel evolutionary algorithm.

The proposed reconfigurable hardware core is a …

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Contactless Charging Adapter, Kevin Nguyen, Emmett Stetz, Joseph Pacheco

Electrical Engineering

Currently, most cell phones utilize wired adapters to charge, which cause a minor hassle when one frequently needs to unplug and replug their device whenever they pick it up to use while it is charging. The charging adapter is a pad that phones can be placed on to wirelessly charge the device. The charging adapter consists of two components: the wireless charging platform to supply and transmit the power, and the wireless charging receiver for phones that do not already have an internal receiver included, specifically targeting newer generation iPhones that utilize a lightning port (i.e. iPhone 5, 6, 6s, …

Investigation Of Fes2 Nanoparticles For Use In Optoelectronic And Thermoelectric Applications, Rick Tefal Eyi Nkoghe

Graduate Theses and Dissertations

Iron pyrite (FeS2) is the most abundant sulfide material on earth. This material has been widely investigated by researchers because of its optical properties. However, it has been difficult to produce High efficiency FeS2 based solar cells. This is due to many different impurities that arise when making the materials. The ability to synthesize pure pyrite FeS2 material is therefore critical for applications.

Pure Iron pyrite nanocrystals were synthesized using hot injection by mixing sulfur with an iron precursor in the presence of an amine. To improve the stability, shorter ligands replaced the native amines ligands. The stability of the …

Smart Feedback Control For Fiber-Optics Acoustic Emission Sensor System, Xiangyu Luo

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Optical fiber sensors for ultrasonic detection have become a subject of much research in recent years. In this thesis, a fiber-optic acoustic emission (AE) sensor system that is capable of performing AE detection, even when the sensor is experiencing large quasi-static strains, is first described. The system consists of a smart selection of a wavelength notch to which a distributed feedback (DFB) laser is locked for high sensitivity AE signal demodulation. A smart feedback control unit for the DFB laser, which is the focus of this thesis, is designed and investigated. The smart control ensures that the AE signal is …

Impact Of Rram Read Fluctuations On The Program-Verify Approach, David M. Nminibapiel, Dmitry Veksler, J.-H. Kim, Pragya R. Shrestha, Jason P. Campbell, Jason T. Ryan, Helmut Baumgart, Kin P. Cheung

Electrical & Computer Engineering Faculty Publications

The stochastic nature of the conductive filaments in oxide-based resistive memory (RRAM) represents a sizeable impediment to commercialization. As such, program-verify methodologies are highly alluring. However, it was recently shown that program-verify methods are unworkable due to strong resistance state relaxation after SET/RESET programming. In this paper, we demonstrate that resistance state relaxation is not the main culprit. Instead, it is fluctuation-induced false-reading (triggering) that defeats the program-verify method, producing a large distribution tail immediately after programming. The fluctuation impact on the verify mechanism has serious implications on the overall write/erase speed of RRAM.

Sensory Interfaces: Intelligent Surgical Box Trainer, Krystal York

Honors Theses

The Fundamentals of Laparoscopic Surgery (FLS) box trainer currently offers medical students the opportunity to practice their dexterity with laparoscopic surgical tools and accustom themselves to the disconnect between their actions and their visible frame of reference. However, at this stage the box trainer offers few ways to test, practice, or improve upon important factors in laparoscopic surgery including disturbance of and pressure applied to patient tissue. The purpose of this project was to add sensory interfaces to the FLS box trainer to offer more concrete feedback for medical students practicing the required tasks, consolidate the information gathered by the …

Development Of A Bio-Inspired, Low-Cost, Piezoelectric Airflow Sensor, Evan Unruh

Research Horizons Day Posters

No abstract provided.

The Effect Of Power Supply Ramp Time On Sram Puf's, Abdelrahman T. Elshafiey Mr.

Electrical and Computer Engineering ETDs

Physical unclonable functions (PUFs) are security primitives that exploit the device mismatches. PUFs are a promising solution for hardware cryptography and key storage. They are used in many security applications including identification, authentication and key generation. SRAM is one of the popular implementations of PUFs. SRAM PUFs offer the advantage, over other PUF constructions, of reusing resources (memories) that already exist in many designs.

In this thesis, for the first time, it is demonstrated that the start-up value of an SRAM PUF could be different depending on the SRAM power supply rising time. An analytical model has been developed to …

Laser Microphone, Michael Mckee

Thinking Matters Symposium Archive

The laser microphone is a multifaceted project. The main objective of this project is the design and construction of a laser microphone. This device is able to detect sound via variations in light waves. Production of this device being one obvious outcome of the project, observation and experimentation comprise the primary focus of the venture. Experiments reveal exactly how well this device is able to function and if it is able to be used in specific engineering applications. To function appropriately, this device should handle the translation from soundwaves to light waves with little to no alteration. Full signal analysis …

Design Verification Of Mems Resonators With Fem Simulator, Joshua Wiswell

Thinking Matters Symposium Archive

The purpose of this project was to use COMSOL, an advanced FEM (finite element modeling) software, to analyze a Coupled Thermal Resonator. This Coupled Thermal Resonator was previously constructed in L-Edit, but when analyzed in COMSOL, it produced undesirable results. This project focused on improving the design and model of the Resonator to improve simulation results and evaluating the actual response of the MEMS device to determine if simulated results were accurate for the actual device. Many different factors may have contributed to producing the double peak seen in the simulation, including the weak coupling between the two resonators. These …

Rural Broadband Mobile Communications: Spectrum Occupancy And Propagation Modeling In Western Montana, Erin Wiles

Graduate Theses & Non-Theses

Fixed and mobile spectrum monitoring stations were implemented to study the spectrum range from 174 to 1000 MHz in rural and remote locations within the mountains of western Montana, USA. The measurements show that the majority of this spectrum range is underused and suitable for spectrum sharing. This work identifies available channels of 5-MHz bandwidth to test a remote mobile broadband network. Both TV broadcast stations and a cellular base station were modelled to test signal propagation and interference scenarios.

Centralized Control For Dc Microgrid Using Finite State Machine, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

In this paper, an autonomous communication-based centralized control for DC microgrids (MG) has been developed and implemented. The proposed controller enables smooth transition between various operating modes. Finite state machine (FSM) has been used to mathematically describe the various operating modes (states), and events that may lead to mode changes (transitions). Therefore, the developed centralized controller aims at optimizing the performance of MG during all possible operational scenarios, while maintaining its reliability and stability. Results of selected cases have been presented. These results show stable transition between modes, verifying the validity and applicability of the proposed controller.

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

A Study Of The Sensitivity Of Energy Conversion Efficiency To Load Variation In Class-E Resonant Power Inverter, Richard Samuel Jennings

Electrical & Computer Engineering Theses & Dissertations

In this thesis the sensitivity of energy conversion efficiency (ECE) and output power of a class-E resonant inverter under variable resistive and inductive load assignments is examined for wireless power transfer (WPT) applications. By performing simulation and mathematical analysis, it was found that the on-resistance of the switching device has minor effect on the design’s efficiency. Additional comparisons between the simulation and mathematical analysis show reasonable output power and ECE load variation performance for the design, but with unique load impedances where zero voltage switching (ZVS) and zero derivative switching (ZDS) are achieved. These comparisons also expose inaccurate mathematical assumptions. …

Study Of A High-Efficient Wide-Bandgap Dc-Dc Power Converter For Solar Power Integration, Yashwanth Bezawada

Electrical & Computer Engineering Theses & Dissertations

This research focuses on the design and analysis of a Boost cascaded Buck-Boost (BoCBB) power converter with super high efficiency in electric power conversion. The BoCBB power converter is based on emerging wide-bandgap silicon-carbide (SiC) MOSFETs and Schottky diodes, which have only 1/6 times of power loss in traditional silicon power semiconductor devices. The BoCBB power converter can be widely applied in solar harvesting for the National Aeronautics and Space Administration (NASA), military bases and electric utilities, as well as high-power DC motor drives for the electric vehicles, robotics, and manufacturing and product lines.

This research analyzed the topology and …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …