Civil Engineering Commons^™

Engineering Decision Support And Expert Systems - Colorado State University, John Labadie

All ECSTATIC Materials

The student is introduced to development of decision support systems (DSS) for application to complex engineering management and design problems under conflicting objectives and uncertainty. A number of techniques are introduced for aiding in the analysis of a wide range of complex multiobjective engineering problems. Several stochastic optimization methods are presented for including risk and reliability in engineering design. Basic concepts of expert systems (ES) are discussed to show an essential synergy between DSS and ES for development of decision support structures that allow inclusion of human domain knowledge, heuristics and fuzzy logic. Heuristic methods such as genetic algorithms and …

Senior Design: Proposed Stem Academic Building, Middlesex Community College, Senior Design Class

Civil Engineering Student Work

2015 Civil Engineering Senior Design Project.

A proposal for a new STEM building to be constructed on the Middlesex Community College.

Completed by:

• Abdullah Al Bakri
• Ryan Benoit
• Brittany Brown
• Michael Buraczynski
• Samuel Colangelo
• Joseph Connolly
• Kyle Elmy
• Michael Fischer
• Victor Goitia Jurado
• Michael Hanley
• Andrew Malian
• Michael Mathews
• Dionys Quezada
• Katie Rougeot
• Jacob Santos
• Isadora Sartor
• Vega Yerko

Environmental Systems Engineering - Swarthmore College, Swarthmore, Arthur Mcgarity

All ECSTATIC Materials

Course in environmental systems engineering offered at Swarthmore College, Swarthmore in Spring 2015.

Analysis Of Rainfall Time-Series, Stefano Galelli

All ECSTATIC Materials

No abstract provided.

Modelling Rainfall-Runoff Processes (Empirical Models), Stefano Galelli

All ECSTATIC Materials

No abstract provided.

The Effect Of Maximum Aggregate Size On The Shear Strength Of Geometrically Scaled Reinforced Concrete Beams, Derek Robert Daluga

Open Access Theses

Shear strength of reinforced concrete beams without web reinforcement has been reported to decrease with increases in depth. This is often referred to as a size effect. This reduction in shear strength has been reported to decrease with the use of web reinforcement and increases in maximum aggregate size. ^ The purpose of this study was to test two hypotheses 1) shear strength increases with increases in maximum aggregate size and 2) aggregate gradation affects this increase in shear strength. Maximum aggregate size is defined here as the size of the smallest sieve opening through which all aggregate particles pass. …

Creep And Shrinkage Behavior Of Fly Ash Based Geopolymer Concrete, Md Rashedul Islam

Doctoral Dissertations

The manuscript presented herein is based on the investigation of the short and long term properties of fly ash based geopolymer concrete (GPC) and their link to fly ash characteristics. Fly ash (FA) exhibits a significantly different particle morphology, which impacts the mechanical properties of the resulting GPC and typically contains impurities that fluctuate from one FA source to another. A key contribution of this research work is the capturing of the variability posed by the FA stockpile with a wide range of physical, chemical, and crystallographic characteristics as a source material to select the GPC mix design. In the …

A Hydrogeologic Evaluation Of The Waterloo Area In The Upper Jefferson River Valley, Montana, Nicole Brancheau

Graduate Theses & Non-Theses

The Upper Jefferson River is one of the most dewatered rivers in Montana. The river exists in an intermontane basin filled with sediment transported from the Highland Mountains to the west, the Tobacco Root Mountains to the east, and the Jefferson River from the south. The Upper Jefferson River Valley is highly dependent on the Jefferson River as the main industry in the valley is agriculture. A majority of the valley is irrigated and used to grow crops, and a good portion is also used for cattle grazing. The residents of the Upper Jefferson River Valley use the aquifer as …

Spatial Analysis Of Passenger Vehicle Use And Ownership And Its Impact On The Sustainability Of Highway Infrastructure Funding, Matthew Volovski

Open Access Dissertations

Across the United States, the sustainability of highway funding is at risk due to increasing need and uncertainty in the factors that drive revenue. Past studies on highway funding sustainability have identified that the root cause of changing highway revenue are the shifts in social demographics and economic characteristics. Unfortunately, from the revenue perspective (the focus of this dissertation), the ability of previous research to account for these factors has been rather limited in two ways; first, the inability to accurately assess current regional vehicle use (a typical prerequisite for statistical modeling of highway revenues) due to difficulties associated with …

Engineering Graphene Oxide Membranes For Contaminant Removal And Bacterial Inactivation, Stefan M. Schaepe

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The need for improved water filtration technologies continues to grow on a global scale. Membrane filtration devices are increasing in use because they can remove a variety of contaminants efficiently. The major issue with membrane filters is biofouling. Coating membranes with nanoparticles such as graphene oxide (GO) can increase contaminant removal and decrease microbial growth.

This research characterizes the properties of the GO itself, two procedures for producing GO coated membranes, the properties of the created membranes and the contaminant removal and bactericidal efficiencies of the membranes. Pure water flux values for GO coated membranes prepared using a direct deposition …

A Probabilistic Model Of Benefit-Cost Analysis For Highway Construction Projects, Yue He

Open Access Theses

Deterministic method occupies the predominant position in economic analysis. However, by using a single value to estimate the project value, deterministic method would hide the risk under it. Analysts may make incorrect judgments by looking at a value without knowing the likelihood of its occurrence and the consequences of its occurrence. A probabilistic model was developed in this study to address this problem. It was found in this study that the traffic flows on Indiana highways follow logistic distributions rather than normal distributions as generally believed. The application of the probabilistic model was illustrated through a case study. The results …

Quantifying Moisture Transport In Cementitious Materials Using Neutron Radiography, Catherine L. Lucero

Open Access Theses

A portion of the concrete pavements in the US have recently been observed to have premature joint deterioration. This damage is caused in part by the ingress of fluids, like water, salt water, or deicing salts. The ingress of these fluids can damage concrete when they freeze and expand or can react with the cementitious matrix causing damage. To determine the quality of concrete for assessing potential service life it is often necessary to measure the rate of fluid ingress, or sorptivity. Neutron imaging is a powerful method for quantifying fluid penetration since it can describe where water has penetrated, …

Examining Unawareness Of Construction Law Principles From A Small Contractor's Perspective, Ketaki Shiralkar

Open Access Theses

Construction industry encompasses myriads of small trades within itself. If we take a microscope and observe, what looks from outside as one big single unit, is in fact made up of many small cogs of a wheel, important ones though, as without them, the functionality of the industry wouldn't be proper. As much as the existence of these small scale contractor's companies is important, so is their survival. There have been many reasons as to why contractors fail, but this study is limited to focus on one of them, which is, the absence of legal knowledge among employees of a …

Investigation Of Industry Perceptions Of Building Information Modeling (Bim)-Based Estimating Practices In The U.S. And China, Zhihang Yi

Open Access Theses

While the Building Information Modeling (BIM) technology has been seen as next revolutionary technology for the Architectural, Engineering, Construction and Facility Management (AEC/FM) fields, the AEC/FM industry does not implement BIM technology on the cost estimating practices as widely as expected. The efficiency improvement on cost estimating with BIM could be accomplished through automating quantity take-offs, closely collaborating design with the estimating professionals and so on. This research explores the advantages and barriers of imbedding BIM technology into the estimating practices which enables the industry deepen their understandings on BIM-based cost estimation method. This study also compares the industry perceptions …

Downward Model Development Of The Soil Moisture Accounting Loss Method In Hec-Hms: Revelations Concerning The Soil Profile, Jessica Holberg

Open Access Theses

Despite the fact that the soil profile is known to impact streamflow, most Curve Number (CN)-based models ignore subsurface processes. This study explores the influence of soil storage on peak flows. Two watersheds in flat, humid west-central Indiana were modeled using both the Natural Resources Conservation Service (NRCS) Curve Number and four versions of the Soil Moisture Accounting (SMA) loss methods in the United States Army Core of Engineers-developed (USACE) Hydrologic Engineering Center Hydrologic Modeling System (HEC-HMS). One watershed encompasses the Wabash and Tippecanoe Rivers' confluence; the other contains an ephemeral stream, Plum Creek. The CN-based model was developed using …

An Integrated System Of Vapor-Compression Chiller And Absorption Heat Pump: Experiment, Modeling, And Energy And Economic Evaluation, Yi-Shu Kung

Open Access Dissertations

Buildings currently consume 41% of the primary energy in the United States. Among the 41% primary energy, approximate 50% are used for building heating, cooling, and water heating. Improving the efficiencies of the devices for building heating and cooling has potentials to reducing the energy consumptions. This research aims to find one solution for building energy efficiency through investigating an Integrated System of an Integrated Compression-Absorption Subcooling System (ICASS) Based upon the principle of subcooling effect, the ICASS can improve the efficiency of the cooling device but also achieve additional useful heating sources potentially used for space heating and domestic …

Algorithms For Bundling And Pricing Trucking Services: Deterministic And Stochastic Approaches, Rodrigo Mesa-Arango

Open Access Dissertations

Bundling and pricing trucking services is an important strategic decision for carriers. This is helpful when they consider the incorporation of new businesses to their networks, look for economic and optimal operations, and develop revenue management strategies. Reverse combinatorial auctions for trucking services are real-world examples that illustrate the necessity of such strategies. In these auctions, a shipper asks carriers for quotes to serve combinations of lanes and the carriers have to bundle demand and price it properly. This dissertation explores several dimensions of the problem employing state-of-the-art analytical tools. These dimensions include: Truckload (TL) and less-than-truckload (LTL) operations, behavioral …

Distributed Real-Time Hybrid Simulation: Modeling, Development And Experimental Validation, Ali Irmak Ozdagli

Open Access Dissertations

Real-time hybrid simulation (RTHS) has become a recognized methodology for isolating and evaluating performance of critical structural components under potentially catastrophic events such as earthquakes. Although RTHS is efficient in its utilization of equipment and space compared to traditional testing methods such as shake table testing, laboratory resources may not always be available in one location to conduct appropriate large-scale experiments. Consequently, distributed systems, capable of connecting multiple RTHS setups located at numerous geographically distributed facilities through information exchange, become essential. This dissertation focuses on the development, evaluation and validation of a new distributed RTHS (dRTHS) platform enabling integration of …

Automated Segmentation, Detection And Fitting Of Piping Elements From Terrestrial Lidar Data, Yun-Ting Su

Open Access Dissertations

Since the invention of light detection and ranging (LIDAR) in the early 1960s, it has been adopted for use in numerous applications, from topographical mapping with airborne LIDAR platforms to surveying of urban sites with terrestrial LIDAR systems. Static terrestrial LIDAR has become an especially effective tool for surveying, in some cases replacing traditional techniques such as electronic total stations and GPS methods. Current state-of-the-art LIDAR scanners have very fine spatial resolution, generating precise 3D point cloud data with millimeter accuracy. Therefore, LIDAR data can provide 3D details of a scene with an unprecedented level of details. However, automated exploitation …

Behavior And Design Of Steel-Plate Composite (Sc) Walls For Blast Loads, Jakob C Bruhl

Open Access Dissertations

Reinforced concrete (RC) structures have historically been the preferred choice for blast resistant structures because of their mass and the ductility provided by steel reinforcement. Steel-plate composite (SC) walls are a viable alternative to RC for protecting the infrastructure against explosive threats. SC structures consist of two steel faceplates with plain concrete core between them. The steel faceplates are anchored to the concrete using stud anchors and connected to each other using tie bars. SC structures provide mass from the concrete infill and ductility from the continuous external steel faceplates. This dissertation presents findings and recommendations from experimental and analytical …