Civil Engineering Commons^™

Seismic Retrofit Benefit Considering Statewide Transportation Assessment, Selamawit Tesfayesus Mehary, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

The purpose of this study was to identify and demonstrate a methodology to prioritize bridges for retrofit in the State of Oregon. Given the limited resources available, retrofitting all vulnerable bridges in the foreseeable future would not be practical. Instead, a retrofit strategy needs to be developed to prioritize the inventory and enumerate the retrofit cost. In this study, a prioritization methodology used a holistic assessment of overall roadway system to consider highway route segments, rather than individual bridges. The overall assessment was based on a cost-benefit analysis including retrofit cost, expected economic loss (with or without retrofit) and social …

Criticality And Risk Assessment For Pipe Rehabilitation In The City Of Santa Barbara Sewer System, Rossi Carmelo Rossi Ii

Master's Theses

Aging sewer infrastructure is posing greater and greater risk to the health and well-being of City residents. Issues can range from pipe blockages in sewer laterals to Sanitary Sewer Overflows. This thesis develops a risk analysis method that can be used by municipalities to maintain and rehabilitate sewer assets. Risk combines the effect of Likelihood of Failure (LOF) and Consequence of Failure (COF) to perform a complete two-dimensional analysis that allows for relative comparison between different pipes in the system. The LOF rating has been equated to pipe integrity while the COF rating was related to the environmental, economic, and …

Structural Health Monitoring Of Bridges Using Wireless Sensor Networks, Seyed Behrad Ghazi Sharyatpanahi

Theses

Structural Health Monitoring, damage detection and localization of bridges using Wireless Sensor Networks (WSN) are studied in this thesis. The continuous monitoring of bridges to detect damage is a very useful tools for preventing unnecessary costly and emergent maintenance. The optimal design aims to maximize the lifetime of the system, the accuracy of the sensed data, and the system reliability, and to minimize the system cost and complexity

Finite Element Analysis (FEA) is carried out using LUSAS Bridge Plus software to determine sensor locations and measurement types and effectively minimize the number of sensors, data for transmission, and volume of …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …

Practitioner Interview, David Ford, Chris Dunn, Leon Basdekas

All ECSTATIC Materials

Phone interview with David Ford from Ford Consulting Engineers; Chris Dunn from US Army Corps of Engineers, Hydrologic Engineering Center; and Leon Basdekas from Colorado Spring Water Utility by David Rosenberg and David Watkins, Jr. Interview questions asked inquired about (i) practitioner’s professional background, (ii) practitioner’s personal experience with systems analysis techniques and software in their job, (iii) role, benefits, and challenges in using systems analysis concepts in the water resources engineering profession, and (iv) recommendations for improving education of environmental and water resources systems analysis in universities.

Practitioner Interview, Guillermo Martinez Baquero

All ECSTATIC Materials

Phone interview with Guillermo Martinez Baquero from Interra by David Watkins, Jr. Interview questions asked inquired about (i) practitioner’s professional background, (ii) practitioner’s personal experience with systems analysis techniques and software in their job, (iii) role, benefits, and challenges in using systems analysis concepts in the water resources engineering profession, and (iv) recommendations for improving education of environmental and water resources systems analysis in universities.

Practitioner Interview, Abhishek Singh

All ECSTATIC Materials

Phone interview with Abhishek Singh from Interra by David Watkins, Jr. Interview questions asked inquired about (i) practitioner’s professional background, (ii) practitioner’s personal experience with systems analysis techniques and software in their job, (iii) role, benefits, and challenges in using systems analysis concepts in the water resources engineering profession, and (iv) recommendations for improving education of environmental and water resources systems analysis in universities.

Evaluating The Effects Of A Congestion And Weather Responsive Advisory Variable Speed Limit System In Portland, Oregon, Matthew Blake Downey

Dissertations and Theses

Safety and congestion are ever present and increasingly severe transportation problems in urban areas throughout the nation and world. These phenomena can have wide-ranging consequences relating to safety, the economy, and the environment. Adverse weather conditions represent another significant challenge to safety and mobility on highways. Oregon is not immune from either of these global issues. Oregon Route (OR) 217, to the southwest of the downtown Portland, is one of the worst freeways for congestion in the state and is also subject to the Pacific Northwest's frequently inclement and unpredictable climate. High crash rates, severe recurrent bottlenecks and highly unreliable …

Development Of A Pedestrian Demand Estimation Tool: A Destination Choice Model, Christopher D. Muhs, Kelly Clifton, Patrick Allen Singleton, Robert J. Schneider

Civil and Environmental Engineering Faculty Publications and Presentations

There is growing support for improvements to the quality of the walking environment, including more investments to promote pedestrian travel. Planners, engineers, and others seek improved tools to estimate pedestrian demand that are sensitive to environmental and demographic factors at the appropriate scale in order to aid policy-relevant issues like air quality, public health, and smart allocation of infrastructure and other resources. Further, in the travel demand forecasting realm, tools of this kind are difficult to implement due to the use of spatial scales of analysis that are oriented towards motorized modes, vast data requirements, and computer processing limitations.

To …

Analysis Of Sedimentation Characteristics Of Dredge Sediment Used In Coastal Restoration And Marsh Creation Projects, Christine M. Mebust

LSU New Orleans Theses and Dissertations

There is a demand to reestablish a healthy coastal ecosystem by rebuilding wetlands with river diversion or dredged sediments in coastal Louisiana. Land building projects using dredged sediments from adjacent canals and river beds, can be used to protect the coastal properties and infrastructure systems from flood and storm surges. To predict the sediment’s long term behavior, math models require input parameters based on sediment engineering properties and material characteristics. Proper characterization is critical for accurate design of coastal restoration projects. The dredge material sedimentation characteristics and their effects on the settlement rate of suspended solid particles and underlying foundation …

Feasibility Study: The Evaluation Of Polymer Coatings To Prevent Weathering Of Weak Rocks, Lauren Distler

Senior Honors Projects, 2010-2019

The weathering and erosion of weak rocks along roadways can cause dangerous and potentially fatal rockfalls.   Various slope stabilization methods exist, but each presents a set of challenges and trade-offs.   The focus of the project is to understand the feasibility of utilizing of a polymerbased slope stabilization technique. Rock samples were collected along US Route 33 in Virginia and West Virginia, and preliminary tests were conducted to evaluate the absorption of water (% mass) and durability. The study evaluates three polymer options in regard to the following criteria: adhesion to rock, layer thickness, semi-permeability, insolubility, and non-toxicity. The polymer selection …

Lighten Everyone's Load: Lidar Applications To Support Engineers, Planners, Scientists And More, Michael J. Olsen

PSU Transportation Seminars

Light detection and ranging (LIDAR) technology is reshaping the civil engineering profession and offers many unique advantages. National efforts such as the 3D Elevation Plan (3DEP) are helping increase the availability of LIDAR data. LIDAR is one of the crucial technologies that is transitioning the world of civil and construction engineering from 2D paper-based design to 3D digital design. The high spatial resolution and accuracy capabilities of LIDAR have led to increased efficiencies, improved analyses, and more informed decision making.

A further advantage of this dataset is that multiple people can use the same dataset for a variety …

Laboratory Comparison Of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials, Chase Aaron Henrichs

Graduate Theses and Dissertations

Full depth reclamation (FDR) is a flexible pavement recycling technique that has not been explored in the state of Arkansas. FDR is unique in that it incorporates the entire flexible pavement section as well as a predetermined portion of the underlying base and sub-base materials with a stabilizer to create a new, stronger stabilized base course. Common stabilization techniques include the addition of asphalt emulsion, asphalt foam, or cement. Using the North Carolina emulsion FDR mix design, the Wirtgen foam FDR mix design, and the Portland Cement Association cement FDR mix design, field materials from four Arkansas highways in the …

Comparing Layer Types For The Use Of Mepdg For Fdr Design, Sadie Smith

Graduate Theses and Dissertations

While Full Depth Reclamation (FDR) has many potential cost and environmental benefits, especially over the lifetime of the pavement, it is necessary to be able to ensure that the recycled pavement will perform adequately. One way in which this can be accomplished is understanding how to best complete the structural design of FDR pavements. Because FDR is a combination of several different layers of material pulverized, mixed, stabilized and re-compacted, it does not fit neatly into any of these predetermined types of materials considered by the Mechanistic Empirical Design Guide (MEPDG). Current practice is to treat FDR as an unbound …

Three Dimensional Simulations Of Tornado Sheltering Effect Of Man-Made Structures, Piotr Gorecki

Graduate Theses and Dissertations

A three dimensional computational fluid dynamics (CFD) model was utilized to investigate tornado-like vortex interactions with wide man-made structures. The tornado-like wind profile was approximated using Rankine vortex model. By utilizing the CFD model, it was explained why tornadoes exhibit less damage on leeward side of large structures. During the preliminary stage of this study, a perpendicular vortex-prism interaction was analyzed. The prism height and the length were equal to the vortex core radius. The prism was also 12 times wider than the vortex core radius. During the vortex-prism interaction, the near-ground portion of the vortex was blocked by the …

Amount Of Uncertainty In The Methods Utilized To Design Drilled Shaft Foundations, Morgan Race

Graduate Theses and Dissertations

In 2001, load and resistance factor design (LRFD) for deep foundations was required by the American Association of State Highway and Transportation Officials (AASHTO). Following implementation of LRFD, localized calibration of resistance factors using data from the states of Colorado, Florida, Kansas, Louisiana/Mississippi, Missouri allowed these states to utilize higher resistance factors during design. However, characterizing the uncertainty in the design of DSF, regarding the geotechnical investigation methods and the utilized software programs, higher values of resistance factors may be calibrated to more efficiently design DSF with the same level of reliability.

Three test sites within the state of Arkansas, …

Development Of Best Management Practices For Turbidity Control During Rainfall Events At Highway Construction Sites Using Polyacrylamide, Joanne Johnson

Graduate Theses and Dissertations

In 2009, the United States Environmental Protection Agency (EPA) promulgated a national turbidity standard for runoff water leaving highway construction sites at 280 nephelometric turbidity units (NTU). Meeting this standard can be challenging as turbidities of runoff waters can exceed 15,000 NTU. The objective of this research was to assess polyacrylamide (PAM), a coagulant aid used in water treatment, to help meet the EPA turbidity regulation. Twelve commercially available PAM types were studied, selected on the basis of charge type (cationic, nonionic, anionic), charge density (0-100%), and molecular weight (0.1-28 Mg mol-1). Jar tests were conducted with runoff waters from …

Measurement Of Transfer And Development Lengths Of 0.7 In. Strands On Pretensioned Concrete Elements, Canh Ngoc Dang

Graduate Theses and Dissertations

The implementation of 0.7 in. (17.8 mm), Grade 270 (1860), low-relaxation prestressing strands in construction is slow regardless of its advantages over the use of 0.6 in. (15.2 mm) and 0.5 in. (12.7 mm) strands. The limited research data and unavailable design guidelines partially account for the slow utilization. This study measured transfer and development length, and evaluated applicable strand spacing of 0.7 in. (17.8 mm) prestressing strands for 24 pretensioned concrete beams. Each beam contained one prestressing strand or two prestressing strands placed at spacing of 2.0 in. (51 mm). The beams were fabricated with high strength, conventional concrete …

Achieving Enhanced Treatment Of Produced Fluids Using Ozone, Hydrogen Peroxide And Electrochemical Oxidation: Full Scale Evaluations, Jamar Willis Blackmon

Graduate Theses and Dissertations

The main focus of the present work was to expand the existing knowledge in using an advanced oxidation process for produced water treatment. Produced water is a phrase used in the oil and gas industry to describe water that is produced as a waste byproduct together with oil and gas. Historically produced water was pumped down disposal wells as a waste product. Due to increasing demand, limited supply and stricter regulation on fresh water sources, exploration and production companies have been compelled to recycle produced waters in many parts of their operations around the world.

Produced water quality varies dramatically …

Alkali-Silica Reaction Mitigation Using High Volume Class C Fly Ash, Sydney Marie Dickson

Civil Engineering Undergraduate Honors Theses

Fly ash is the residue produced from coal combustion in electric generating plants. There are two types of fly ash, Class C and Class F. Approximately 40 percent of fly ash generated from coal combustion can be used as a partial replacement of cement in concrete. Incorporating fly ash improves concrete properties and extends its service life. Alkali-silica reaction (ASR) is an expansive reaction between reactive silica typically found in aggregates (rock and sand) and alkalis in cement. This reaction results in the formation of a gel that absorbs water and swells, which exerts an internal pressure in concrete. This …