Biomaterials Commons^™

The Sub-Chronic Vascular Response To Water-Borne Embolic Coacervates., Joshua P. Jones, Monika Sima, Russell J. Stewart

Biomedical Engineering Western Regional Conference

Water-borne coacervates that solidify in response to decreasing ionic strength have been developed as an agent for small vessel transcatheter embolization. Here, the sub-chronic vascular response to these agents will be presented. Embolic coacervates demonstrated a benign foreign body response, which supported tissue ingrowth and stabilized vessel occlusion out to 28 days. As with other liquid embolics, occlusion is dependent upon mechanical obstruction of the vessel and native thrombus. Over time, the thrombus becomes more organized by fibroblasts. Continuation of the processes seen at 28 days will likely result in fibrous encapsulation of the embolic coacervate, further stabilizing the occlusion.

Differentiation And Containment Of Derived Pancreatic Beta Cells, Caden Duffy, Alonzo Cook Ph.D.

Biomedical Engineering Western Regional Conference

Currently, the only permanent cure for Type 1 Diabetes is a pancreatic or islet transplant. With the shortage of donors, we are progressing research towards alternative therapies by differentiating induced pluripotent stem cells into derived pancreatic β-cells that can be transplanted and used as treatment for Type 1 Diabetes. We are investigating methods to increase the yield of fully derived, insulin producing pancreatic β-cells and are additionally researching the use of hydrophilized expanded polytetrafluoroethylene for use in cell containment devices. These devices could offer a future alternative for islet transplantation in human patients.

Super-Hydrophobic And Anti-Microbial Surfaces Via Carbon Infiltrated-Carbon Nanotubes, Christian Dalon Esplin, Anton Bowden, Brian Jensen

Biomedical Engineering Western Regional Conference

No abstract provided.

Structural Mrsa Resistance Through Carbon-Infiltrated Carbon Nanotube Coating Of External Fixator Pins, Jaclyn Larsen, Stephanie Morco, Brian Jensen, Anton Bowden

Biomedical Engineering Western Regional Conference

No abstract provided.

Resorption Rate Of Bioresorbable Materials For Possible Use In Self-Expanding Stents, Jared R. Park, Jason Porter, Anton Bowden

Biomedical Engineering Western Regional Conference

This study investigates the mechanical behavior of various polymers after a period of degradation from exposure to a Saline Solution. The study found that PLA and PDLLA do not have significant degradation over a period of 2 months, while PLA has a sharp decrease in strength after 7 days.

Effect Of Multiple Confined Compression/Stress Relaxation Cycles On Cross-Linked Alginate Pore Size., Sindhu Kolar Venkat, Erik L. Risa, Bergren Antell, Maryam Mobed-Miremadi

Biomedical Engineering Western Regional Conference

No abstract provided.

Towards A Bioselective Surface For Treatment Of Sepsis In A Hemoperfusion Device, Karl F. Schilke, Ramya Raman, Bonan Yu, Erik Hahn, Jonathan Su

Biomedical Engineering Western Regional Conference

Sepsis is a dysregulated immune response to circulating bacteria/endotoxin. Hemoperfusion is a promising treatment, but is not universally effective and can unacceptable blood damage. We are developing protein-repellent hydrogel nanofilms that can be grown on a variety of surfaces, and functionalized with “click-ready” pathogen-binding proteins expressed by Genetic Code Expansion (GCE). The extremely rapid, bioorthogonal “click” immobilization chemistry eliminates prior purification, maximizes surface loading, and guarantees spatial orientation of the immobilized proteins. We have demonstrated pathogen binding and blood protein repulsion by these layers, suggesting that they may be part of effective treatments for sepsis and other applications.

Molecular Modeling Of Antibody-Antigen Binding Near Solid Surfaces, Derek Bush, Thomas Knotts

Biomedical Engineering Western Regional Conference

Antibody microarrays are biosensors that have the potential to revolutionize molecular detection in medicine, scientific research, and national defense. However, current microarrays are not widely used due to problems including poor reproducibility and signal quality, unbalanced antibody performance, and cross-reactivity. Prior work in the area focused mainly on the stability of the antibody alone and not its affinity for its antigen. This presentation shows results of using molecular simulation to determine how different types of surfaces affect antigen binding to surface-tethered antibodies. The results offer an unprecedented, molecular-level view into these protein-protein-surface interactions and how to drive binding to occur.

The Effect Of Tgfβ-1 On Adipose-Derived Stem Cell (Asc) Ring Constructs, Ashley C. Apil

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

Adipose-derived Stem Cells (ASC’s) provide an optimal source for potentially graft replacing, tissue-engineered vessel constructs due to their ease of extraction and ability to be patient-specific. In order to make ASC ring constructs a more viable replacement for grafts, they need to have mechanical properties similar to native arteries, which is largely influenced by the extracellular matrix protein collagen. TGFβ-1 is known to stimulate collagen production in ASC’s, so this study explores the effect that TGFβ-1 has on the resulting thickness and tensile strength of ASC ring constructs.

Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei

Theses and Dissertations--Biomedical Engineering

Common biodegradable polyesters such as poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) are used as drug delivery vehicles for tissue regenerative applications. However, they are typically bioinert, with drug loading limitations. Polymerizing the active agent or precursor into its respective biodegradable polymer would control drug loading via molar ratios of drug to initiator used for synthesis. Simvastatin was chosen due to its favorable anti-inflammatory, angiogenic, and osteogenic properties. In addition, its lactone ring lends itself to ring-opening polymerization and, consequently, the synthesis of poly(simvastatin) with controlled simvastatin release.

Simvastatin was first polymerized with a 5kDa methyl-terminated poly(ethylene glycol) …

Shape Memory Behavior Of Dense And Porous Niti Alloys Fabricated By Selective Laser Melting, Soheil Saedi

Theses and Dissertations--Mechanical and Aerospace Engineering

Selective Laser Melting (SLM) of Additive Manufacturing is an attractive fabrication method that employs CAD data to selectively melt the metal powder layer by layer via a laser beam and produce a 3D part. This method not only opens a new window in overcoming traditional NiTi fabrication problems but also for producing porous or complex shaped structures. The combination of SLM fabrication advantages with the unique properties of NiTi alloys, such as shape memory effect, superelasticity, high ductility, work output, corrosion, biocompatibility, etc. makes SLM NiTi alloys extremely promising for numerous applications.

The SLM process parameters such as laser power, …

Structural Characteristics And Corrosion Behavior Of Bio-Degradable Zn-Li Alloys In Stent Application, Shan Zhao

Dissertations, Master's Theses and Master's Reports

Zinc has begun to be studied as a bio-degradable material in recent years due to its excellent corrosion rate and optimal biocompatibility. Unfortunately, pure Zn’s intrinsic ultimate tensile strength (UTS; below 120 MPa) is lower than the benchmark (about 300 MPa) for cardiovascular stent materials, raising concerns about sufficient strength to support the blood vessel. Thus, modifying pure Zn to improve its mechanical properties is an important research topic.

In this dissertation project, a new Zn-Li alloy has been developed to retain the outstanding corrosion behavior from Zn while improving the mechanical characteristics and uniform biodegradation once it is implanted …

Formulation And Testing Of Biodegradable Polymeric Coating On Zinc Wires In Cardiovascular Stent Application, Avishan Arab Shomali

Dissertations, Master's Theses and Master's Reports

Biodegradable and biocompatible poly (L-lactic-acid) (PLLA) coating was applied on a modified zinc (Zn) substrate by dip coating, with the intent to delay the bio-corrosion and slow the degradation rate of zinc substrate. 3-(Trimethoxysilyl) propyl methacrylate (MPS) was used for modification of the zinc substrate for promoting the adhesion between the metallic substrate and the polymer coating. It is hypothesized that the delay in Zn biodegradation could be useful in the first several weeks to prevent the early loss of mechanical integrity of the endovascular stent and to improve the healing process of the diseased vascular site. The PLLA coating …

Developing Afm Techniques For Testing Peg Hydrogels, Hannah L. Cebull, Jessica Stukel, Rebecca Willits

Williams Honors College, Honors Research Projects

Many instruments are used to find elastic properties of biological samples using methods such as tensile and bending tests, but using the atomic force microscope (AFM) is considered a non-destructive method because it can provide repeated local stiffness information without damaging the sample. It additionally allows the sample to be tested in an aqueous environment, which is optimal for soft materials such as hydrogels. The nanoindentation is performed via cantilever, measuring the deflection of the cantilever during the contact of the sample using a laser. Compared to hard samples, testing soft materials can present more challenges when working with the …

Investigation Of Polymeric Composites For Controlled Drug Release, Hsi-Wei Yeh

Theses and Dissertations

The Electrospray (ES) technique is a promising particle generation method for drug delivery due to its capabilities of producing monodisperse PLGA composite particles with unique configurations and high drug encapsulation efficiency. In the dissertation work, the coaxial dual capillary ES was used to generate drug-loaded core-shell PLGA particles to study the effects of particle filling materials, drug loading locations and particle shell thicknesses on the resultant in vitro release behaviors of the hydrophilic and/ or hydrophobic model drugs. Through release profile characterization of drug-loaded PLGA particles (particle size: 400 nm and 1 μm), it was confirmed that the co-encapsulation of …

Nanomedicine Drug Delivery Across Mucous Membranes, Michael G. Lancina Iii

Theses and Dissertations

NANOMEDECINE DRUG DELIVERY ACROSS MUCOUS MEMBRANES

By Michael G. Lancina III

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Virginia Commonwealth Univeristy, 2017.

Major Director: Dr. Hu Yang, Associate Professor, Chemical and Life Science Engineering

Control over the distribution of therapeutic compounds is a complex and somewhat overlooked field of pharmaceutical research. When swallowing a pill or receiving an injection, it is commonly assumed that drug will spread throughout the body in a more or less uniform concentration and find its way to wherever it is needed. In …

Fabrication Of Flexible, Biofunctional Architectures From Silk Proteins, Ramendra K. Pal

Theses and Dissertations

Advances in the biomedical field require functional materials and processes that can lead to devices that are biocompatible, and biodegradable while maintaining high performance and mechanical conformability. In this context, a current shift in focus is towards natural polymers as not only the structural but also functional components of such devices. This poses material-specific functionalization and fabrication related questions in the design and fabrication of such systems. Silk protein biopolymers from the silkworm show tremendous promise in this regard due to intrinsic properties: mechanical performance, optical transparency, biocompatibility, biodegradability, processability, and the ability to entrap and stabilize biomolecules. The unique …

Modulating The Innate Immune Response To Electrospun Scaffolds And Polymer Degradative Byproducts, Daniel Abebayehu

Theses and Dissertations

Implanted biomaterials often induce inflammation that frequently leads to the foreign body response, fibrosis, and the failure of the implant. Thus, it is important to evaluate how cells interact with materials to promote a more regenerative response. It is critical to determine how to modulate the response of tissue resident innate immune cells, as they are among the first cells to interact with implanted materials. Among tissue resident innate immune cells are mast cells, which are inflammatory sentinels that degranulate and orchestrate the fate of other cell populations, such as monocytes/macrophages and lymphocytes. Mast cells have also been reported to …

Pore-Confined Carriers And Biomolecules In Mesoporous Silica For Biomimetic Separation And Targeting, Shanshan Zhou

Theses and Dissertations--Chemical and Materials Engineering

Selectively permeable biological membranes composed of lipophilic barriers inspire the design of biomimetic carrier-mediated membranes for aqueous solute separation. This work imparts selective permeability to lipid-filled pores of silica thin film composite membranes using carrier molecules that reside in the lipophilic self-assemblies. The lipids confined inside the pores of silica are proven to be a more effective barrier than bilayers formed on the porous surface through vesicle fusion, which is critical for quantifying the function of an immobilized carrier. The ability of a lipophilic carrier embedded in the lipid bilayer to reversibly bind the target solute and transport it through …

An Enhanced Spring-Particle Model For Red Blood Cell Structural Mechanics: Application To The Stomatocyte–Discocyte– Echinocyte Transformation, Mingzhu Chen, Fergal Boyle

Articles

Red blood cells (RBCs) are the most abundant cellular element suspended in blood. Together with the usual biconcave-shaped RBCs, i.e., discocytes, unusual-shaped RBCs are also observed under physiological and experimental conditions, e.g., stomatocytes and echinocytes. Stomatocytes and echinocytes are formed from discocytes and in addition can revert back to being discocytes; this shape change is known as the stomatocyte–discocyte–echinocyte (SDE) transformation. To-date, limited research has been conducted on the numerical prediction of the full SDE transformation. Spring- particle RBC (SP-RBC) models are commonly used to numerically predict RBC mechanics and rheology. However, these models are incapable of predicting the full …