Aerospace Engineering Commons^™

The Atmospheric Waves Experiment (Awe), Ludger Scherliess, Yucheng Zhao, Pierre-Dominique Pautet

Space Dynamics Laboratory Publications

Modern theory and modeling indicate vertically propagating Gravity Waves (GWs), waves generated primarily by severe weather disturbances, have profound effects on the variability and mean state of the Ionosphere-Thermosphere-Mesosphere (ITM) system, and can significantly impact space-based communications, navigation, and tracking.

Physics-Constrained Generative Artificial Intelligence For Rapid Takeoff Trajectory Design, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The urban air mobility (UAM) industry is rapidly growing to alleviate regional transportation congestion. Electric vertical takeoff and landing (eVTOL) aircraft plays a critical role in this growth due to their efficiency and reduced operating cost. However, excessive energy demands by the takeoff phase impact the practicality of the aircraft. Conventional multidisciplinary analysis and optimization (MDAO) identifies a minimum energy trajectory but can be computationally intensive due to iteratively evaluating high-fidelity simulation models. In addition, complex constraints in practical MDAO pose crucial challenges to the already demanding process. Surrogate models enable efficient design optimization, but complex constraints could prohibit surrogate-based …

Versatile Injector Platform: A Modular Design For Supersonic Flow Research, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fuel–air mixing remains a critical challenge in the development of high-speed air-breathing propulsion due to the extremely short residence times in supersonic combustors. Experimental studies are essential to investigate the underlying mixing mechanisms, but they require injection systems that can deliver repeatable and controlled flow conditions. In this work, we present the design of a modular strut-type injection platform developed for the Missouri S&T Supersonic Wind Tunnel. In its initial configuration, the platform features a planar trailing-edge slit to generate a two-dimensional jet and includes interchangeable trailing-edge modules to support a wide range of geometries and flow-control strategies. Designed with …

Side-By-Side Evaluation Of The Outgassing Rate And Ultimate Pressure Achieved Inside Tubes Made Of Low-Carbon And Stainless Steel, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 degrees C. When the chambers were baked at 400 degrees C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump …

Sex-Dependent Changes In Risk-Taking Predisposition Of Rats Following Space Radiation Exposure, Elliot Smits, Faith E. Reid, Ella N. Tamgue, Paola Alvarado Arriaga, Charles Nguyen, Richard A. Britten

Department Radiation Oncology & Biophysics Faculty Publications

The Artemis missions will establish a sustainable human presence on the Moon, serving as a crucial steppingstone for future Mars exploration. Astronauts on these ambitious missions will have to successfully complete complex tasks, which will frequently involve rapid and effective decision making under unfamiliar or high-pressure conditions. Exposure to low doses of space radiation (SR) can impair key executive functions critical to decision making. This study examined the effects of exposure to 10 cGy of Galactic Cosmic Ray simulated radiation (GCRsim) on decision-making performance in male and female rats with a naturally low predisposition for risk-taking (RTP) prior to exposure. …

A Two-Hit Model Of Executive Dysfunction: Simulated Galactic Cosmic Radiation Primes Latent Deficits Revealed By Sleep Fragmentation, Richard A. Britten, Ella N. Tamgue, Paola Arriaga Alvarado, Arriyam S. Fesshaye, Larry D. Sanford

Department Radiation Oncology & Biophysics Faculty Publications

Future Artemis-class missions to Mars will expose astronauts to prolonged space radiation (SR), sleep disruption, and operational demands requiring greater autonomy, placing decision making and executive function at heightened risk. Both SR and sleep fragmentation (SF) independently impair cognition, yet their combined effects remain poorly understood. Using the Associative Recognition Memory and Interference (ARMIT) task, we assessed cognitive performance in male rats exposed to 10 cGy of Galactic Cosmic Ray simulation (GCRsim), SF, or both. Under well-rested conditions, GCRsim-exposed rats exhibited overt deficits in the C.1.2 stage, performing at chance when reinforcement contingencies shifted, consistent with impaired cognitive flexibility. In …

Drone-Based Medication Delivery For Rural, Flood-Prone Coastal Cities, Yin-Hsuen Chen, Amro M. El-Adle, Kevin J. O'Brien, Taylor Wentworth, Heather G. Richter

Center for Geospatial Science, Education & Analytics Faculty Publications

Access to healthcare remains a critical challenge for rural populations, particularly in flood-prone coastal communities where transportation barriers limit access to essential medical services. This study evaluates the effectiveness of drone-based medication delivery in improving healthcare accessibility for vulnerable populations on Virginia’s Eastern Shore. Compared to traditional personal vehicle travel, drone delivery reduced trip times from up to 50 minutes to under 10 minutes for more than 80% of the population, including elderly patients. Using publicly available datasets, we developed two transportation vulnerability indices that incorporate age, travel time, and flood risk to prioritize patients for drone-based pharmaceutical delivery. These …

Little Problems: Photosynthetic Textile Treatments As A Source Of Oxygen, Morgan Campbell

Open Access Master's Theses

During human space travel, oxygen (O2) must be stored and carried aboard the shuttle for the entire journey; compressed O2 is highly flammable and combustible, thus doing so puts the crew’s lives at risk in the event of a fire (Mandel, 2019). By creating O2 onsite, the necessity of compressed O2 canisters and the associated risks can be reduced or erased entirely. Photosynthesis, the process through which plants convert atmospheric carbon dioxide (CO2) into O2, is one method of creating O2 (Lorch, 2020). The National Aeronautics and Space Administration (NASA) has experimented with photosynthetic O2 systems since its inception but …

Investigation Of Subsurface Thermal Radiation Phenomena In Fibrous Thermal Protection Systems, Colby L. Gore

Theses and Dissertations--Science, Technology, Engineering, and Mathematics (STEM) Education

Atmospheric re-entry induces intense thermal stress upon vehicles through a high-enthalpy boundary layer that encompasses the craft. To protect these vehicles, numerous insulative methods, known as thermal protection systems (TPS), are deployed to protect the craft during re-entry. The TPS materials insulate the craft from intense thermal transmission that would terminate a mission. In hypersonic environments, vast temperature gradients exist, enforcing the exponential effect of thermal radiation. However, TPS materials are commonly low-density fibrous materials that allow for the potential to be penetrated by thermal radiation. A series of arc-jet tests was completed to replicate enhanced radiative conditions in a …

Numerical Investigation Of Wind Disturbance Around A Multirotor Uav In Crosswind And Vertical Flight, Garrison Page

Theses and Dissertations--Mechanical and Aerospace Engineering

Uncrewed Aerial Vehicles (UAVs) are being increasingly utilized in a wide range of research applications, especially in meteorology. This is due to such factors as their ease of use, maneuverability compared to other forms of data collection, and for rotor- craft, the ability to hover. However, the rotorwash generated by UAVs can introduce significant disturbances, potentially affecting measurement accuracy from sensors. While several studies have investigated the rotorwash of individual UAVs utilizing Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD), there is limited exploration into how different rotor configurations and external wind conditions influence regions of turbulent flow around …

Development Of An Immersed Boundary Method-Wall Modeled Large Eddy Simulation Approach For Incompressible Flows And Aeroacoustic Predictions, John C. Higgins

Theses and Dissertations--Mechanical and Aerospace Engineering

The performance capabilities of rotorcraft have improved significantly in the past decade as both manned and unmanned rotorcraft become a larger part of future transportation systems. Private companies as well as various government offices have worked to develop capabilities ranging from transportation/package delivery to intelligence/surveillance to livestock monitoring. Their practicality in both rural and urban areas, however, is questionable due to the significant tonal and broadband noise which is produced by the rotors. Public acceptance of rotorcraft, namely small Unmanned Aerial Vehicles (sUAVs), in transportation systems is an issue largely associated with the noise generation and it's effect on nearby …

Direct Numerical Simulation Of Pulsating Flow In Curved Pipes: Insights Into Aortic Dissection In Humans, Gokul Anugrah Gopakumar

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation investigates the hemodynamics of pulsating blood flow in curved vessels through direct numerical simulations (DNS), with the overarching aim of uncovering fluid dynamic mechanisms linked to the onset and progression of aortic dissection in humans. The work is structured in two parts: (i) fundamental studies in idealized geometries and (ii) preliminary investigations in patient-specific anatomies. In the first part, curved pipe models representing the aortic arch are used to isolate the effects of pulsation frequency, amplitude ratio, and curvature ratio on transitional and turbulent flow dynamics. The simulations reveal that curvature-driven centrifugal forces shift the peak velocity toward …

High-Altitude Balloon-Launched Uncrewed Aircraft System Measurements Of Atmospheric Turbulence And Qualitative Comparison With Infrasound Microphone Response, Anisa Haghighi

Theses and Dissertations--Mechanical and Aerospace Engineering

This study explores the use of a balloon-launched uncrewed aircraft system (UAS) to measure atmospheric turbulence in the troposphere and lower stratosphere using both wind velocity measurements and infrasonic acoustic energy. The UAS, a glider configured for autonomous descent along a predefined trajectory, had on board, in situ sensors to capture thermodynamic and kinematic atmospheric parameters. Additionally, it carried an infrasonic microphone to evaluate its potential for remotely detecting clear-air turbulence by capturing infrasonic waves. The system’s performance was assessed over the course of three test flights conducted in New Mexico, USA, in 2021. The descent enabled high-resolution profiling, with …

Simulation-To-Hardware Validation Of Mpc For Binary Thruster 2d Cubesat Control, Aevar Amundinusarson Oefjoerd

Theses and Dissertations--Mechanical and Aerospace Engineering

Small satellites must execute precise, fuel-limited maneuvers under strict actuation and operational constraints. Model Predictive Control (MPC) is a suitable approach because it optimizes future actions while explicitly enforcing these limits. This work evaluates (1) whether MPC can operate in real time using binary (on/off), asymmetric thrusters, and (2) whether a high-fidelity digital twin can be used to tune and validate the controller prior to hardware testing.

An MPC framework was implemented on a planar satellite prototype that floats on air bearings, operates at 16.7 Hz (60 ms period), and uses eight binary thrusters exhibiting up to 13.2% variation in …

Kentucky Re-Entry Universal Payload System (Krups): Second Atmospheric Re-Entry Flight, Kirsten F. Ford

Theses and Dissertations--Mechanical and Aerospace Engineering

Kentucky Re-entry Universal Payload System (KRUPS) is a small-scale re-entry capsule developed at the University of Kentucky. The KRUPS project began in 2013 with the aspiration of providing an affordable and repeatable method of collecting data on the re-entry environment. Numerically-based methods used to model re-entry require experimental data to validate their predictions. However, re-entry data is not easily obtained. Flight tests of re-entry vehicles require extensive time and resources, including a substantial financial burden. Alternatively, ground testing is not able to accurately and completely replicate the complex re-entry environment. Thus, there is a need for an inexpensive and accessible …

Damping Modulation Of Dampened Kapton Surfaces, Sebastian Esteban

Honors Undergraduate Theses

When droplets are vibrated or disturbed, they can exhibit a complex sloshing motion, an understudied behavior in drop physics. Droplet sloshing involves a complex combination of transverse and longitudinal motion that changes the droplet's effective weight on the surface the droplet is on. Our current understanding stems from preliminary work focusing on a cantilever beam of fixed thickness and variable viscosity of the liquid being sloshed. This investigation will focus on how variable cantilever thickness and constant viscosity for a liquid being sloshed affects the beam's deflection under consistent vibration. It will also investigate how the natural frequency of a …

Generalized Reference Targeting For Spacecraft, David Geller, David Woffinden, Collin York

Space Dynamics Laboratory Publications

For spaceflight programs to achieve some of the aggressive exploration initiatives such as visiting and landing on other celestial bodies, rendezvousing with other orbiting vehicles, and ultimately returning crew safely to Earth, an assortment of targeting algorithms to compute the necessary burns to strategically maneuver a spacecraft to a variety of destinations are required. Numerous examples exist, but rather than creating and implementing multiple targeting solutions, is it possible to have a general targeting model that can accommodate a variety of applications? Originally motivated for mission design and analysis purposes, this paper outlines a generalized reference targeting algorithm for spaceflight …

End-To-End Neural Network Based Optimal Control For Asymmetric Quadrotor Uas, Ross O'Hara

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents the development and evaluation of a neural network-based optimal controller for asymmetrically loaded quadrotor unmanned aerial systems (UAS). Traditional control strategies such as PID are typically designed under symmetry assumptions and often degrade in performance when faced with significant loading asymmetries. To address this, a six-degree-of-freedom quadrotor model incorporating rotor dynamics and center-of-mass offsets was developed. A trajectory optimization framework using MATLAB’s fmincon solver generated over 50,000 energy-optimal trajectories across symmetric and asymmetric conditions. These were used to train a range of feedforward neural network architectures in a full-factorial study.

The best-performing controller was identified, having five …

High-Speed Aircraft Stability And Control Metrics, Timothy T. Takahashi, Jack A. Griffin, Ramana Grandhi

Faculty Publications

This review paper identifies key stability and control screening parameters needed to design low-risk, general-purpose high-speed aircraft. These derive from MIL-STD-8785C, MIL-STD-1797, and older AGARD reports, and are suitable for assessing conceptual high-speed vehicles. We demonstrate their applicability using published ground test, computation, and flight test data from the Bell X-2, North American X-15, Martin X-24A, Northrop HL-10, Lockheed Blackbird (YF-12/SR-71), and North American XB-70 as well as the Rockwell Space Shuttle Orbiter. The relative success of the X-15 and Blackbird and the performance limitations of the others indicate the need to scrutinize lateral-directional stability at the preliminary design phase. …

Improving Visual Inspection Performance During Pre-Flight Visual Inspections By Aircraft Maintenance Technicians., Patrick Codd

Doctoral

Visual inspection is a critical task in aircraft maintenance and is the predominant inspection technique used in the global aviation sector. For safety reasons, visual inspections by Aircraft Maintenance Technicians are routinely conducted on a daily basis during pre-flight inspections. Its significance becomes evident when considering the potential consequences of Aircraft Maintenance Technicians not seeing observable defects during visual inspections. For example, an aircraft crash landing in 1989 resulted in 111 fatalities and was attributed to a visual inspection failure. The industrial quality control literature also illustrates the varying accuracy for the observation of defects and hazards, underscoring the inherent …