Aerospace Engineering Commons^™

Ablation Test Case Series #2. Test Case Baseline Results, Tim Risch, Chris Kostyk

Ablation Workshop

No abstract provided.

Ablation Test Case Series #2. Are The Test Problems Well Posed With Ch = Cm = 0?, Ben F. Blackwell

Ablation Workshop

No abstract provided.

Prediction Of Tacot Decomposition Using The Chaleur Code, Ben F. Blackwell, Micah Howard

Ablation Workshop

This talk will briefly discuss the ablation thermochemistry data used for the TACOT code comparison test cases. Three areas of interest will be highlighted: codes and numerical methods for solving the thermochemical equilibrium problem, differences in ablation thermochemistry data (Bc and enthalpy) when using the CEA and JANAF databases, and the effect of the choice of pyrolysis gas species will be discussed.

A Perspective On The Design And Development Of The Spacex Dragon Spacecraft Heatshield, Daniel J. Rasky

Ablation Workshop

In December, 2010, Space Exploration Technologies (SpaceX) successfully orbited, re-entered and recovered their Dragon spacecraft, on an almost “picture perfect” first full mission. Earlier in 2009, SpaceX, announced the passing of a significant technical milestone with the successful arc jet testing of a their new high performance heat shield material, called PICA-X, which provided the primary (forebody) thermal protection for Dragon.

In 2008 and 2009, Dr. Rasky worked closely with SpaceX on the Dragon heatshield design and also developing the ability to manufacture PICA-X. The “X” stands for the SpaceX-developed variants that have several improved properties and greater ease of …

The Mysteries Of Real Materials, Bernard Laub

Ablation Workshop

The presentation will consist in showing arc jet data mysterious to the modelers. It will show a short movie (10-20 sec) of an arc jet test where a material exhibited a failure mode that nobody understands followed by thermocouple data from arc jet tests on another material of interest in which the T/Cs exhibit repeatable, consistent, fascinating yet frustrating response characteristics that have the modelers stumped. This all happens between RT and 200 F. Doesnt sound important? Unless we figure out what it is and can model it, we can’t size the TPS with any confidence.

Characterization Of Material Response During Arc-Jet Testing With Optical Methods–Status And Perspectives, Michael Winter

Ablation Workshop

The characterization of ablation and recession of heat shield materials during arc jet testing is an important step towards understanding the governing processes during these tests and therefore for a successful extrapolation of ground test data to flight. The behavior of ablative heat shield materials in a ground-based arc jet facility is usually monitored through measurement of temperature distributions (across the surface and in-depth), and through measurement of the final surface recession [1, 2]. These measurements are then used to calibrate/validate materials thermal response codes, which have mathematical models with reasonably good fidelity to the physics and chemistry of ablation, …

Sprite: A Tps Test Bed For Ground And Flight, P. Agrawal, A. Cassell, N. Mangini, K. Peterson, Dinesh K. Prabhu, K. Skokova, G. Swanson, D. M. Empey, S. Gorbunov, A. Howard, J. Arnold, E. Venkatapathy

Ablation Workshop

Engineers in the Entry Systems and Technology Division at NASA Ames Research Center developed a fully instrumented, small atmospheric entry probe called SPRITE (Small Probe Reentry Investigation for TPS Engineering). SPRITE, conceived as a flight test bed for thermal protection materials, was tested at full scale in an arc-jet facility so that the aerothermal environments the probe experiences over portions of its flight trajectory and in the arc-jet are similar. This ground-to-flight traceability enhances the ability of mission designers to evaluate margins needed in the design of thermal protection systems (TPS) of larger scale atmospheric entry vehicles.

Computational Chemistry Modelling Of The Oxidation Of Highly Oriented Pyrolitic Graphite (Hopg), Savio Poovathingal, Thomas E. Schwartzentruber

Ablation Workshop

Under high heat flux, carbon based Thermal Protection Systems (TPS) are observed to rapidly ablate and an accurate characterization is essential to their design. Dissociated oxygen atoms (from the gas phase) striking the surface of TPS could lead to several possibilites. The O atom could adsorb on the surface, recombine with another O atom to form O2 and oxidize the surface to produce CO or CO2 resulting in recession of the surface (ablation). The goal is to predict finite rate models for these reactions which could be incorporated into CFD and DSMC solvers. Our efforts are to predict the rates …

Development And Validation Of Sacram: A Swiss Approach To The Computational Response Of An Ablative Material, Ojas Joshi, Georges Duffa, Pénélope Leyland

Ablation Workshop

Future space exploration missions foresee high-speed entries into planetary atmospheres. These latter imply extreme thermal conditions to which the space vehicle is exposed to, and require an appropriate thermal protection system (TPS). The interest of the scientific community in modelling and testing of materials that compose the TPS has hence greatly increased over the past few years. Since a complete set of material properties is not available in open literature, it is difficult to numerically rebuild experiments. The inter-code comparison exercise proposed by the AF/SNL/NASA Ablation Workshop aims to give a baseline platform for ablation code calibration, with a complete …

Advanced Thermal Protection Systems (Tps) And Transition Analysis: Unique Experimental Capabilities And Current Research Efforts At The University Of Texas At Arlington, Matthew Crisanti, Cody Ground, Stefano Gulli, Jared Poempipatana, Luca Maddalena

Ablation Workshop

A unique experimental capability in the academic panorama is the 1.6 MW-classic arc-jet facility located at the Aerodynamics Research Center of the University of Texas at Arlington. The arc-heated wind tunnel has recently been refurbished and repurposed (extended testing time of the order of minutes and testing gas-composition control) for the study and characterization of the aerothermal response of TPS candidate materials for sustained hypersonic flight.

Numerical Investigation Of Three-Dimensional Effects Within A Charring Ablator, Alexandre Martin, Ovais U. Khan, Huai-Bao Zhang

Ablation Workshop

Re-entry of a spacecraft occurs at hypersonic regime where flow field is extremely complex. High temperature gradients occurring in the shock-layer region ionizes and dissociates the air. Even if a large portion of heat generated during this process is convected away in the surrounding air, a fraction of it is still transferred to the vehicle. Therefore, it is important to protect the vehicle with a suitable kind of shielding. Of many techniques available today, the use of ablator material is increasing in popularity. The basic idea behind an ablating heat shield is that the energy incident on the spacecraft is …

Computation Of Surface Catalysis For Graphite Exposed To High Enthalpy Nitrogen Flow, Abhilasha Anna, Iain D. Boyd

Ablation Workshop

The high temperatures on a hypersonic vehicle surface caused by heat loads encountered during (re-)entry through a planetary atmosphere require a reliable Thermal Protection System (TPS) that makes a good understanding of the physical and chemical processes essential for its design. Surface catalysis is a crucial chemical process that directly impacts aerothermal heating of the vehicle TPS. The effects of surface catalysis for graphite exposed to high-enthalpy nitrogen flow are examined in this study.

Experimental Investigation Of Blowing Effects On Turbulent Flow Over A Rough Surface, Mark A. Miller, Sean C. C. Bailey, Alexandre Martin

Ablation Workshop

Entry of spacecraft into an atmosphere occurs at hypersonic speeds, extremely complex flow fields, with aerothermodynamic effects which can cause the surface to be subjected to extreme heating. It is therefore important to protect the vehicle and its payload using a thermal protection system (TPS). Heat shields, which are an important part of a TPS, can be of either ablative or non-ablative types. For an ablative TPS, the energy is dissipated through surface material charring and ablation, as well as releasing gasses which serve to carry energy away from the TPS and thus reduce the total heat flux into the …

Preparing Nasa For The 21st Century: Oct Perspective On Edl, Harry Partridge

Ablation Workshop

NASA’s Chief Technologist, within the Office of the Chief Technologist (OCT), is the principal advisor to the NASA Administrator in matters related to Agency-wide technology policy and programs and is responsible for the planning, advocacy and coordination of technology development activities within NASA to meet future mission needs. OCT works with the Mission Directorates and mission planners to infuse new technologies into future missions and with other Governmental Agencies to coordinate technology development efforts of mutual interest. In addition, OCT manages NASA’s Space Technology Program (STP), which also includes the SBIR and STTR programs. In this presentation OCT’s role within …

Introduction: The 5th Ablation Workshop And Beyond, Ioana Cozmuta, Alexandre Martin

Ablation Workshop

No abstract provided.

The Art And Beauty Of Flight, Edmond Ing Huang Tan

The Hilltop Review

This picture nicely represents the art and gracefulness of flight with the beauty of sunset in a tranquil setting. In the picture is a powered paragliding, also known as paramotoring in the plains of Nebraska. The ability to fly both low and slow safely, the 'open' feel, the minimal equipment and maintenance costs, the portability, minimally regulated and requires no license are claimed to be this type of flying's greatest merits. Paramotors can be flown during any season of the year anywhere but not in high wind conditions which typically means at low Sun azimuths as shown in the picture …

Microgas Turbine Engine Characteristics Using Biofuel, Edmond Ing Huang Tan, William W. Liou

The Hilltop Review

Aviation fuels commonly used today are extracted from the kerosene fraction of the crude oil that is distilled between the gasoline and the diesel. Crude oil is not renewable and the world oil reserve is generally believed to be on the decline. In 2006, 6.3% of the world's refinery production was used for aviation fuel (Nygren et. al., 2009). At an estimated rate of 3% increase of fuel demand per year, aviation use alone will consume the world fuel production by 2026. Therefore, there is a need for the aviation industry to reduce its dependence on fossil fuels and, perhaps, …

Ablation Test-Case Series #2. Numerical Simulation Of Ablative-Material Response: Code And Model Comparisons, Jean R. Lachaud, Alexandre Martin, Tom Van Eekelen, Ioana Cozmuta

Mechanical Engineering Faculty Publications

This test-case series on the numerical simulation of the response of ablative-materials really started out of pure curiosity. Code developers and users were curious to see "how the codes compare" and "what is the effect of the different hypotheses in the models implemented". The objective of these test-case series is to propose problems of increasing complexity until it is agreed that the most-elaborated well-defined problem is formulated. The first test-case was mostly a simple heat transfer problem chosen for it’s simplicity (it is summarized in section 2.1). The second test-case series goes one step further, with the objective of reaching …

Ablation Test-Case Series #3. Numerical Simulation Of Ablative-Material Response: Code And Model Comparisons, Tom Van Eekelen, Jean R. Lachaud, Alexandre Martin, Ioana Cozmuta

Mechanical Engineering Faculty Publications

The test-case series #3 will be a further extension of the tests defined within the framework of the NASA ablation modelling workshops. In order to reduce the amount of work, all tests within test-case series #3, will use the TACOT material defined by Lachaud et al. The main goal of this new series, is to test the 3D modelling capabilities of the participating codes. The first 1D results were presented at the 4th Ablation workshop, and together with the results of the second test-case series, will be discussed and analyzed more thoroughly at the 5th Ablation Workshop, Feb. 28- March …

Pico-Satellite Integrated System Level Test Program, Marcus A. Ruddy

Master's Theses

Testing is an integral part of a satellite’s development, requirements verification and risk mitigation efforts. A robust test program serves to verify construction, integration and assembly workmanship, ensures component, subsystem and system level functionality and reduces risk of mission or capability loss on orbit.

The objective of this thesis was to develop a detailed test program for pico-satellites with a focus on the Cal Poly CubeSat architecture. The test program established a testing baseline from which other programs or users could tailor to meet their needs. Inclusive of the test program was a detailed decomposition of discrete and derived test …