Aerospace Engineering Commons^™

Determine Airborne Release Fractions (Arf) / Respirable Fractions (Rf) For Use In Safety Based Documents, Michael Quinn, Jacob Miller

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

Study Of Optical Propulsion Concepts And Techniques For Small-Satellites, Jaykob Neil Maser

Doctoral Dissertations

"The first objective of this research is to manufacture and investigate the characteristics and use of asymmetric, metallic, nanostructures for plasmonic force propulsion, a developing method of nano-/picosatellite thrust generation. This project developed a higher-fidelity model of a recently envisioned small spacecraft propulsion system for precision pointing and proximity control. Plasmonic force propulsion harnesses solar light focused onto plasmon reactive sub-wavelength nanostructures to generate polarized oscillations of electrons on the surface of metallic nanostructures which accelerate and expel nanoparticle propellant via strong optical forces. This research also explores how material selection affects the electromagnetic response of the closely positioned asymmetric …

A Systems And Cost Analysis Of Human Rated Mars Entry, Descent, And Landing Vehicles, Paul Daniel Friz

Doctoral Dissertations

"Cost is one of the biggest obstacles to sending humans to Mars. However, spacecraft costs are typically not taken into consideration until after the preliminary vehicle and mission concepts have been designed. Once costs have been estimated, managers and project teams often lack confidence that the final cost of the mission will match the preliminary estimates. The present work provides a robust methodology for using cost as a valid metric early in the design phase of future human Mars Entry, Descent, and Landing (EDL) vehicles. This is done in three parts. First, state of the art parametric costing methods are …

Characterization Of A Green Electric Solid Propellant For Electric Propulsion, Matthew Scott Glascock

Doctoral Dissertations

"Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. These propellants are also being considered for use in ablative pulsed plasma thruster and multimode systems. In this work, the behavior and performance of a novel green electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated. Using an inverted pendulum micro-Newton thrust stand, the impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration and long-duration runs to end-of-life, at energy levels of …

The Design And Testing Of A 500 Lbf Liquid Oxygen/Liquid Methane Engine, Manuel Jesus Herrera

Open Access Theses & Dissertations

The development of liquid oxygen/liquid methane (LOX/LCH4) propulsion systems has recently become a topic of interest ever since this particular propellant combination was determined to be a suitable candidate for use in space exploration, more specifically missions to Mars. This propellant combination is unique because the propellants can be synthesized from local resources on Mars, a process called In-situ Resource Utilization (ISRU). ISRU would allow for spacecrafts to be lighter and/or increase its payload capacity to Mars-bound missions because the vehicle would not have to store the propellants required for the voyage back to earth.

For this reason, The University …

Bayesian Model Averaging Based Storage Lifetime Assessment Method For Rubber Sealing Rings, Di Liu, Shaoping Wang, Chao Zhang, Mileta M. Tomovic

Engineering Technology Faculty Publications

Rubber sealing ring is one of the most widely used seals. It is always stored for a period of time before put into use, especially in aeronautic and aerospace applications. It is necessary to evaluate the storage lifetime of rubber sealing rings. However, due to the long storage lifetime of rubber sealing rings, two issues need to be handled, including model uncertainty and lack of storage lifetime data. A Bayesian model averaging based storage lifetime assessment method for rubber sealing rings is proposed in this article. The Gamma distribution model and Weibull distribution model are selected as the candidate models …

Wake Vortex Pair Formation As An Analog For Dust Devil And Tornado Genesis, Robert L. Ash

Mechanical & Aerospace Engineering Faculty Publications

In 1966, meteorologist R.S. Scorer attempted to explain how large-scale oceanic tropical depressions become hurricanes or typhoons. His model was based on the idea that when these large-scale tropical depression structures begin to rotate, mostly due to Coriolis effects, an annular outer portion of that structure changes suddenly to a potential vortex segment, with the same outer radial limit as the low-pressure structure, but with an inner radius that conserves the overall system angular momentum and kinetic energy. By analogy with the "jump" instability describing sudden buckling of a vertical column, this paper shows that his conjecture merits additional consideration. …

Parametric Study Of A Turbofan Engine With An Auxiliary High-Pressure Bypass, Sharanabasaweshwara A. Asundi, Syed Firasat Ali

Mechanical & Aerospace Engineering Faculty Publications

A parametric study of a novel turbofan engine with an auxiliary high-pressure bypass (AHPB) is presented. The underlying motivation for the study was to introduce and explore a configuration of a turbofan engine which could facilitate clean secondary burning of fuel at a higher temperature than conventionally realized. The study was also motivated by the developments in engineering materials for high-temperature applications and the potential utility of these developments. The parametric study is presented in two phases. Phase I presents a schematic of the turbofan engine with AHPB and the mathematics of the performance parameters at various stations. The proposed …

Dynamic Response Of A Hingeless Helicopter Rotor Blade At Hovering And Forward Flights, Pratik Sarker

LSU New Orleans Theses and Dissertations

The helicopter possesses the unrivaled capacity for vertical takeoff and landing which has made the helicopter suitable for numerous tasks such as carrying passengers and equipment, providing air medical services, firefighting, and other military and civil tasks. The nature of the aerodynamic environment surrounding the helicopter gives rise to a significant amount of vibration to its whole body. Among different sources of vibrations, the main rotor blade is the major contributor. The dynamic characteristics of the hingeless rotor consisting of elastic blades are of particular interest because of the strongly coupled equations of motion. The elastic rotor blades are subjected …

Operating Different Displays In Military Fast Jets Using Eye Gaze Tracker, Jeevitha Shree Dv, L. R. D. Murthy, Kamalpreet Singh Saluja, Pradipta Biswas

Journal of Aviation Technology and Engineering

This paper investigated the use of an eye-gaze-controlled interface in a military aviation environment. We set up a flight simulator and used the gaze-controlled interface in three different configurations of displays (head down, head up, and head mounted) for military fast jets. Our studies found that the gaze-controlled interface statistically significantly increased the speed of interaction for secondary mission control tasks compared to touchscreen- and joystick-based target designation system. Finally, we tested a gaze-controlled system inside an aircraft both on the ground and in different phases of flight with military pilots. Results showed that they could undertake representative pointing and …

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Graduate Student Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Graduate Student Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …

Rotating Mount For Complex Fluid Flow Research, Kirsten Murphy

Honors Theses

Fluid flow around rotating objects is mathematically complex and there is currently limited experimental data on the subject. To make Western Michigan University capable of this research, a rotating wind tunnel mount was developed. The mount design was integrated into the existing setup at the Applied Aerodynamics Laboratory (AAL) to allow seamless transitions between different research projects. Non-rotating and rotating disk prototypes were created from 3D-printed materials to test the mount’s capabilities. Experimental data gathered from utilizing this rotating mount was analyzed to understand the aerodynamic effects on rotating disks in a fluid stream. From testing the rotating disk prototype …

Rotating Mount For Complex Fluid Flow Research, Kirsten Murphy

Honors Theses

Fluid flow around rotating objects is mathematically complex and there is currently limited experimental data on the subject. To make Western Michigan University capable of this research, a rotating wind tunnel mount was developed. The mount design was integrated into the existing setup at the Applied Aerodynamics Laboratory (AAL) to allow seamless transitions between different research projects. Non-rotating and rotating disk prototypes were created from 3D-printed materials to test the mount’s capabilities. Experimental data gathered from utilizing this rotating mount was analyzed to understand the aerodynamic effects on rotating disks in a fluid stream. From testing the rotating disk prototype …

Nonupdating Methods For The Characterization Of Nonlinear Stress-Strain And Delamination Fracture Properties Of Fiber Reinforced Composites, Bastiaan Corstiaan Van Der Vossen

Mechanical and Aerospace Engineering Dissertations - Archive

Efforts to develop strength and life prediction analysis tools for aircraft composite structures have shown a great need to understand the complexity and interaction of failure modes. Many failure models are highly sensitive to transverse nonlinear shear stress-strain and delamination fracture properties, which are notoriously hard to measure. Without proper input parameters, life predictions analyses will not be successful. The objective of this work was to accurately characterize these mechanical properties of carbon fiber reinforced polymer composites through advanced experimental methods. Full-field noncontact deformation measurements using Digital Image Correlation are used to quantify all surface strains components, enabling the design …

Evaporative Hotspot Cooling Of Microprocessors Using Electrowetting On Dielectric (Ewod), Arvind Venkatesan

Mechanical and Aerospace Engineering Dissertations - Archive

The increased use of smart devices and great strides in fabrication technologies have resulted in densely packed electronics. Combined with 3D packaging, high heat uxes have become the norm. The need for advanced thermal management solutions has risen. Most devices based on their load pro le and architecture are susceptible to non-uniformities in heat uxes. These non-uniformities with very high heat uxes are known as hotspots. Mitigation of hotspots is very important for the normal functioning and long term reliability of microprocessors. Multiple attempts have been made at developing microscale thermal solutions. Most prominent among them are microchannels and heat …

Design Principles For Large Foil Bearings Based On Scaling Laws: Analyses And Experiment, Srikanth Honavara Prasad

Mechanical and Aerospace Engineering Dissertations - Archive

Gas foil bearings are used for supporting high speed turbomachinery systems. They are characterized by complex physical and thermal interactions between the lubricating fluid and the structural elements. Mathematically, the behavior of such systems is governed by nonlinear partial differential equations and pose substantial computational challenges. However, their potential applications in aerospace systems and power generation systems have renewed research and development efforts aimed at simplifying their design and analyses methods. Commercialization of gas foil bearings in Mega Watt scale applications necessitate the development of simple tools for estimating bearing design parameters such as load capacity, radial clearance, and support …

Surface Roughness Formation During Tensile Plastic Deformation Of Nickel Polycrystals, Kranthi Balusu

Mechanical and Aerospace Engineering Dissertations - Archive

Understanding the formation of surface roughness could help better diagnose a metal component’s health and could potentially help in making better microstructure design decisions. Both of these, in turn, contribute to the design of efficient structural components. In this work, the research objective is to understand the relationship between the surface microstructure (i.e., grain orientations) and the surface-height changes in nickel polycrystals undergoing small amounts of tensile plastic deformation. The secondary objective is to determine the relationship between surface height and strain localization. Primarily simulations were used, along with experimental surface roughness observations, to validate the simulation results. Discrete dislocation …