Senior Project: Global Position Determination From Observed Relative Position Of Celestial Bodies,
2010
California Polytechnic State University, San Luis Obispo
Senior Project: Global Position Determination From Observed Relative Position Of Celestial Bodies, Michael Holmes
Aerospace Engineering
A method was developed to determine the latitude and longitude of an observer based on the observed position of the Moon and several other celestial bodies. The basic principal developed dealt with the proximity of the Moon. Its relative displacement from calculated values was measured using photography by comparison with stars near the Moon. Photographs were taken from a location in San Luis Obispo at Longitude 120°35.9' and Latitude 35°13.3'. The analysis method has determined the location of the observer to a Longitude of 117°43.8'. An additional method located the observer to 36°38.7'N Latitude and 114°47.6'W Longitude.
Matlab® Gui Visualization Of Classical Orbital Elements,
2010
California Polytechnic State University, San Luis Obispo
Matlab® Gui Visualization Of Classical Orbital Elements, Nancy Teresa Cabrera
Aerospace Engineering
The classical orbital elements of an orbit are eccentricity, angular momentum, inclination, right ascension of ascending node, true anomaly, and argument of perigee. These six parameters define an orbit. Using MATLAB® to model a satellite orbiting Earth in three dimensions, a graphical user interface was created to allow a user to manipulate the orbital elements to desired quantities. In doing so, each parameter’s impact on the orbit is visually displayed. This furthers the understanding of how the parameters are linked to the orbit. When the interface is first opened, the default circular orbit has a range of 20,000 kilometers, an …
Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment,
2010
Air Force Institute of Technology
Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book
Theses and Dissertations
This research develops the design of several components and/or systems for an experimental space-based chromotomographic hyperspectral imager that is being built by the Air Force Institute of Technology. The design work includes three separate topics. The first topic was the development of a structure utilizing finite element analysis and eigenanalysis for the ground-based version of the chromotomographic experiment (CTEx). The ground-based experiment was performed as a risk mitigation measure for the space-based experiment. The second topic includes a design review of a contractor's proposed off-axis Mersenne telescope for the space-based chromotomographic hyperspectral imager. The work included the creation of preliminary …
Attitude Control Of A Satellite Simulator Using Reaction Wheels And A Pid Controller,
2010
Air Force Institute of Technology
Attitude Control Of A Satellite Simulator Using Reaction Wheels And A Pid Controller, Ryan E. Snider
Theses and Dissertations
Attitude requirements of a satellite are determined by its mission: telecommunications, optical imagery, and meteorology to name a few. A satellite's ability to orient its mission critical hardware (solar arrays, attitude sensors, etc.), as well as its mission specific payload, is incumbent upon the performance of the satellite's attitude control system (ACS). For a highly accurate ACS and for moderately fast maneuverability, reaction wheels are preferred because they allow continuous and smooth control while inducing the smallest possible disturbance torques. The objective of this research is to design, build, test, and evaluate the performance of a reaction wheel ACS on-board …
Relative Orbit Elements For Satellites In Elliptical Orbits,
2010
Air Force Institute of Technology
Relative Orbit Elements For Satellites In Elliptical Orbits, Kirk W. Johnson
Theses and Dissertations
The purpose of this research was to describe the unperturbed relative motion of Earth satellites in elliptical orbits using a simple dynamics model whose parameters allow significant geometrical insight and operational efficacy. The goal was to retain the advantages of the Relative Orbit Elements (ROE) realization of the Hill-Clohessy-Wiltshire (HCW) equations, a linearized dynamics model for circular reference orbits. Specifically, this thesis analyzed the geometry of satellite rendezvous and proximity operations using the ROE parameters to characterize the model’s utility. Next, through a comprehensive literature review, this thesis sought possible approaches for developing a similarly useful parameterization for chief orbits …
Mission Analysis And Design For Space Based Inter-Satellite Laser Power Beaming,
2010
Air Force Institute of Technology
Mission Analysis And Design For Space Based Inter-Satellite Laser Power Beaming, Nicholas M. Keller
Theses and Dissertations
This research effort develops an interdisciplinary design tool to optimize an orbit for the purpose of wirelessly beaming power from the International Space Stations (ISS) Japanese Experimental Module Exposed Facility (JEM/EF) to a target satellite. For the purpose of this initiative, the target satellite will be referred to as FalconSAT6, a reference to the proposed follow-on satellite to the U.S. Air Force Academy’s (USAFA) FalconSAT5 program. The USAFA FalconSAT program provides cadets an opportunity to design, analyze, build, test and operate small satellites to conduct Department of Defense (DoD) space missions. The tool developed for this research is designed to …
Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station,
2010
Air Force Institute of Technology
Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse
Theses and Dissertations
This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image. Without this precise measurement any scene that is …
Accurate Dynamic Response Predictions Of Pnpsat I,
2010
Air Force Institute of Technology
Accurate Dynamic Response Predictions Of Pnpsat I, Michael D. Trottier
Theses and Dissertations
Researchers at the Air Force Institute of Technology (AFIT) and the Operationally Responsive Space (ORS) Office have conducted extensive vibration testing and structural modeling on the first ORS Plug-and-Play Satellite (PnPSAT I). The intent of this research effort is to evaluate the premise that current post-integration spacecraft environmental test requirements can be reduced or modified using accurately tuned finite element (FE) models. As part of this research, modal testing was conducted on the PnPSAT I structural panels at AFIT. The modal testing was part of a much larger series of experimental trials on various configurations of PnPSAT I at the …
Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms,
2010
Air Force Institute of Technology
Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas
Theses and Dissertations
The current barrier to CubeSat proliferation is their lack of utility depth. These small satellites are exceptionally well suited for specific space missions such as space weather observation and other scientific data gathering exploits; however, they are not suited for every mission. The 10cm-cube form factor that gives the CubeSat its unique advantage is also its greatest hindrance. A potential bridge over this gap is the successful integration of deployable booms onto the CubeSat structure. With this research, the Air Force Institute of Technology (AFIT) explored the parameters of deployable tapespring booms using the triangular retractable and collapsible (TRAC) cross- …
Mission Analysis For Multiple Rendezvous Of Near-Earth Asteroids Using Earth Gravity Assist,
2010
Air Force Institute of Technology
Mission Analysis For Multiple Rendezvous Of Near-Earth Asteroids Using Earth Gravity Assist, Uriah J. Tobey
Theses and Dissertations
The Jet Propulsion Laboratory (JPL) catalog of near-Earth objects (NEOs) such as asteroids and comets contains over 6600 asteroids and 150 comets as of February of 2010. This includes over 1000 potentially hazardous asteroids, or objects with orbits that pass close enough to Earth to pose a potential impact threat. The asteroid community believes there are a significant number of objects still undiscovered, which makes finding, tracking, and calculating missions to study these objects an active area of research. This study was based on finding orbit solutions using Earth gravity assist to visit one near-Earth object (NEO) a year for …
System Integration And Attitude Control Of A Low-Cost Spacecraft Attitude Dynamics Simulator,
2010
California Polytechnic State University, San Luis Obispo
System Integration And Attitude Control Of A Low-Cost Spacecraft Attitude Dynamics Simulator, Ryan L. Kinnett
Master's Theses
The CalPoly Spacecraft Attitude Dynamics Simulator mimics the rotational dynamics of a spacecraft in orbit and acts as a testbed for spacecraft attitude control system development and demonstration. Prior to this thesis, the simulator platform and several subsystems had been designed and manufactured, but the total simulator system was not yet capable of closed-loop attitude control. Previous attempts to make the system controllable were primarily mired by data transport performance. Rather than exporting data to an external command computer, the strategy implemented in this thesis relies on a compact computer onboard the simulator platform to handle both attitude control processing …
Adaptive Control Applied To The Cal Poly Spacecraft Attitude Dynamics Simulator,
2010
California Polytechnic State University, San Luis Obispo
Adaptive Control Applied To The Cal Poly Spacecraft Attitude Dynamics Simulator, Matthew C. Downs
Master's Theses
The goal of this thesis is to use the Cal Poly Spacecraft Attitude Dynamics Simulator to provide proof of concept of two adaptive control theories developed by former Cal Poly students: Nonlinear Direct Model Reference Adaptive Control and Adaptive Output Feedback Control. The Spacecraft Attitude Dynamics Simulator is a student-built air bearing spacecraft simulator controlled by four reaction wheels in a pyramidal arrangement. Tests were performed to determine the effectiveness of the two adaptive control theories under nominal operating conditions, a “plug-and-play” spacecraft scenario, and under simulated actuator damage. Proof of concept of the adaptive control theories applied to attitude …
