Astrodynamics Commons^™

A Pareto-Frontier Analysis Of Performance Trends For Small Regional Coverage Leo Constellation Systems, Christopher Alan Hinds

Master's Theses

As satellites become smaller, cheaper, and quicker to manufacture, constellation systems will be an increasingly attractive means of meeting mission objectives. Optimizing satellite constellation geometries is therefore a topic of considerable interest. As constellation systems become more achievable, providing coverage to specific regions of the Earth will become more common place. Small countries or companies that are currently unable to afford large and expensive constellation systems will now, or in the near future, be able to afford their own constellation systems to meet their individual requirements for small coverage regions.

The focus of this thesis was to optimize constellation geometries …

Trajectory Design In The Spatial Circular Restricted Three-Body Problem Exploiting Higher-Dimensional Poincare Maps, Amanda F. Haapala

Open Access Dissertations

In this investigation, the role of higher-dimensional Poincaré maps in facilitating trajectory design is explored for a variety of applications. To begin, existing strategies to implement Poincaré maps for trajectory design applications in the spatial CR3BP are evaluated. New applications for these strategies are explored, including an analysis of the natural motion of Jupiter-family comets that experience temporary capture about Jupiter, and the search for periodic orbits in the vicinity of the primary bodies in the spatial problem. Because current strategies to represent higher-dimensional maps, generally, lead to a loss of information, new approaches to represent all information contained in …

Trajectory Optimization For A Misson To The Trojan Asteroids, Shivaji Senapati Gadsing

Masters Theses

The problem of finding a minimum-fuel trajectory for a mission to the Jovian Trojan asteroids is considered. The problem is formulated as a modified traveling salesman problem. Two different types of algorithms such as an exhaustive search algorithm and a serial rendezvous search algorithm are developed. The General Mission Analysis Tool (GMAT) is employed for finding optimum trajectories with minimal fuel consumption. The selection of a minimum-fuel mission trajectory, and the associated target asteroids, will be a key factor in determining feasibility and scientific value of a Trojan tour and rendezvous mission.

The transfer trajectory followed by a spacecraft between …

Design And Analysis Of An Attitude Determination And Control Subsystem (Adcs) For Afit's 6u Standard Bus, Erin R. Dannemeyer

Theses and Dissertations

The design and testing of AFIT's 6U Attitude Determination and Control Subsystem (ADCS) are explored to establish 3-axis attitude control. The development of AFIT's 6U CubeSat standard bus is an on-going research effort designed to create in-house CubeSat bus components and software. The 6U chassis measures approximately 11 x 24 x 37 cu cm and can have a mass up to 12 kg. The larger bus size (as compared to the more common 3U CubeSat) allows for increased power capabilities and potential to host multiple or larger payloads. Individual ADCS hardware components were either commercially purchased or built in-house and …

Could We Colonize Venus?, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Analysis Of An Inflatable Gossamer Device To Efficiently De-Orbit Cubesats, Robert A. Hawkins Jr.

Master's Theses

There is an increased need for spacecraft to quickly and efficiently de-orbit themselves as the amount of debris in orbit around Earth grows. Defunct spacecraft pose a significant threat to the LEO environment due to their risk of fragmentation. If these spacecraft are de-orbited at the end of their useful life their risk to future spacecraft is greatly lessened. A proposed method of efficiently de-orbiting spacecraft is to use an inflatable thin-film envelope to increase the body's area to mass ratio and thusly shortening its orbital lifetime. The system and analysis presented in this project is sized for use on …

Investigation Into The Mitigation Of The Effects Of Uncertain Optical Degradation On An Interplanetary Solar Sail Mission Using A Single Model Update, Jordan Smiroldo

Master's Theses

The renewed academic interest in using solar sails as a source of spacecraft propulsion has been accompanied by a recent fervor of investigations into non-ideal and off-nominal sail performance considerations. One of the most influential considerations, uncertain optical degradation, has been shown to present significant trajectory design difficulties. This paper investigates the potential of using a mid-course degradation model update to mitigate the risk of missing the target destination in a sample 300 day Earth-Venus trajectory. Using a range of potential degradation profiles, it is shown that correcting in the first half of the mission is highly likely to result …

Light Curve Generation For Satellites In Geostationary Orbits, Kimberly Andersen

Aerospace Engineering

This research were conducted at California Polytechnic State University San Luis Obispo throughout the Winter, Spring, and Fall quarters of 2013. The data presented in this paper was taken on the night of October 20, 2013 at the Cal Poly San Luis Obispo Astronomical Observatory and was reduced using IRAF software available on campus. This report describes the results of an observation of two bright XM geostationary satellites and the steps taken to get to those results. The average magnitude values of the XM-1 and XM-2 satellites were 13.753±0.007 and 14.015±0.007 respectively. The magnitude varied an average of 0.1 magnitudes …

Attitude Estimation For A Gravity Gradient Momentum Biased Nanosatellite, Arash Mehrparvar

Master's Theses

Attitude determination and estimation algorithms are developed and implemented in simulation for the Exocube satellite currently under development by PolySat at Cal Poly. A mission requirement of ±5˚ of attitude knowledge has been flowed down from the NASA Goddard developed payload, and this requirement is to be met with a basic sensor suite and the appropriate algorithms. The algorithms selected in this work are TRIAD and an Extended Kalman Filter, both of which are placed in a simulation structure along with models for orbit propagation, spacecraft kinematics and dynamics, and sensor and reference vector models. Errors inherent from sensors, orbit …

Trajectory Optimization For Spacecraft Collision Avoidance, James W. Sales Jr.

Theses and Dissertations

The last several decades have resulted in an unfortunate byproduct of space exploration and development: orbital debris. Satellites in Low Earth Orbit have been required to make an ever increasing number of course corrections in order to avoid collisions. Despite efforts to the contrary, collisions continue to occur, each time creating additional debris and increasing the requirement for the remaining satellites to maneuver. Every required maneuver decreases a satellite's service life. The purpose of this study is to develop a minimum thrust profile to maneuver an orbiting satellite out of its projected error ellipse before a collision occurs. For comparison, …

A Study Of The Collisional Evolution Of Orbital Debris In Geopotential Wells And Geo Disposal Orbits, Christina R. Diaz

Master's Theses

This thesis will present the effects of the orbital debris evolution in two key areas: the geosynchronous disposal orbit regime known as “graveyard” and the two geopotential wells found in 105◦ W and 75◦ E longitude bins. After developing a GEO specific orbit propagator for NASA Johnson Space Center’s Orbital Debris Of- fice, collisions were simulated throughout these regimes using a low velocity breakup model. This model considered the effects of perturbations particularly non-spherical Earth effects (specifically sectorial and zonal harmonics), lunar effects, third body effects and solar radiation pressure effects. The results show that CDPROP does well in simulating …

Feasibility Of Cubesat Formation Flight Using Rotation To Achieve Differential Drag, Skyler M. Shuford

Aerospace Engineering

This paper presents the results of a study conducted to understand the feasibility of CubeSat formation flight. The mechanism for separation and formation studied was differential drag, achieved by rotating the CubeSats to give them different cross-sectional areas. Intuitively, lower altitude orbits provide much higher separation effects. Although the most influential orbital effects occur with maximum and minimum cross-sectional areas, an attitude-controlled and a tumbling CubeSat may provide enough differential drag to meet separation requirements of a mission. Formation flight is possible, but due to the non-linearity of the system, gain scheduling may be the most effective method of long …

Feasibility Of Microsatellite Active Debris Removal Systems, Karsten J. James

Master's Theses

Space debris has become an increasingly hazardous obstacle to continued spaceflight operations. In an effort to mitigate this problem an investigation of the feasibility of a microsatellite active debris removal system was conducted. Through proposing a novel concept of operation, utilizing a grapple-and-tug system architecture, and by analyzing each resultant mission phase in the frame of a representative example, it was found that microsatellite scale systems are capable of fulfilling the active debris removal mission. Analysis of rendezvous, docking, control and deorbit mission requirements determined that the design of a grapple-and-tug system will be driven by sizing of the propellant …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Characterization Of The Effects Of A Sun-Synchronous Orbit Slot Architecture On The Earth's Orbital Debris Environment, Connor David Noyes

Master's Theses

Low Earth orbit represents a valuable limited natural resource. Of particular interest are sun-synchronous orbits; it is estimated that approximately 44% of low Earth satellites are sun-synchronous. A previously developed sun-synchronous orbit slot architecture is considered. An in-depth analysis of the relative motion between satellites and their corresponding slots is performed. The long-term evolution of Earth's orbital environment is modeled by a set of coupled ordinary differential equations. A metric for quantifying the benefit, if any, of implementing a sun-synchronous architecture is developed. The results indicate that the proposed slot architecture would reduce the frequency of collisions between satellites in …

Ad-Hoc Regional Coverage Constellations Of Cubesats Using Secondary Launches, Guy G. Zohar

Master's Theses

As development of CubeSat based architectures increase, methods of deploying constellations of CubeSats are required to increase functionality of future systems. Given their low cost and quickly increasing launch opportunities, large numbers of CubeSats can easily be developed and deployed in orbit. However, as secondary payloads, CubeSats are severely limited in their options for deployment into appropriate constellation geometries.

This thesis examines the current methods for deploying cubes and proposes new and efficient geometries using secondary launch opportunities. Due to the current deployment hardware architecture, only the use of different launch opportunities, deployment direction, and deployment timing for individual cubes …

Design And Performance Of Circulation Control Geometries, Rory Martin Golden

Master's Theses

With the pursuit of more advanced and environmentally-friendly technologies of today’s society, the airline industry has been pushed further to investigate solutions that will reduce airport noise and congestion, cut down on emissions, and improve the overall performance of aircraft. These items directly influence airport size (runway length), flight patterns in the community surrounding the airport, cruise speed, and many other aircraft design considerations which are setting the requirements for next generation aircraft. Leading the research in this movement is NASA, which has set specific goals for the next generation regional airliners and has categorized the designs that meet the …

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury

Faculty Publications

With the sustainability movement, vegetated building envelopes are gaining more popularity. This requires special wind effect investigations, both from sustainability and resiliency perspectives. The current paper focuses on wind load estimation on small- and full-scale trees used as part of green roofs and balconies. Small-scale wind load assessment was carried out using wind tunnel testing in a global-effect study to understand the interference effects from surrounding structures. Full-scale trees were investigated at a large open-jet facility in a local-effect study to investigate the wind-tree interaction. The effect of Reynolds number combined with shape change on the overall loads measured at …

Visual Attitude Propagation For Small Satellites, Samir Ahmed Rawashdeh

Theses and Dissertations--Electrical and Computer Engineering

As electronics become smaller and more capable, it has become possible to conduct meaningful and sophisticated satellite missions in a small form factor. However, the capability of small satellites and the range of possible applications are limited by the capabilities of several technologies, including attitude determination and control systems. This dissertation evaluates the use of image-based visual attitude propagation as a compliment or alternative to other attitude determination technologies that are suitable for miniature satellites. The concept lies in using miniature cameras to track image features across frames and extracting the underlying rotation.

The problem of visual attitude propagation as …

Three-Axis Stabilized Earth Orbiting Spacecraft Simulator, Alan F. Ma, Nikola N. Dominikovic

Aerospace Engineering

This report details the method and results of the program created for simulating an Earth orbiting spacecraft with control actuators and orbital perturbations. The control actuators modeled are reaction thrusters, reaction/momentum wheels, and control moment gyros (CMG). The perturbations modeled were gravity gradient, electromagnetic torques, solar radiation pressure, gravity gradients, third-body effects, Earth oblateness and atmospheric drag. This simulation allows for satellite control in all 6 degrees of freedom for any Earth orbiting spacecraft. Assumptions include rigid body dynamics, no sensor noise, constant spacecraft cross-sectional area, constant coefficient of drag and reflectivity, ignoring the effects due to the moon, moment …