Operations Research, Systems Engineering and Industrial Engineering Commons^™

Optimal Communication Structures For Concurrent Computing, Andrii Berdnikov

Doctoral Dissertations

This research focuses on communicative solvers that run concurrently and exchange information to improve performance. This “team of solvers” enables individual algorithms to communicate information regarding their progress and intermediate solutions, and allows them to synchronize memory structures with more “successful” counterparts. The result is that fewer nodes spend computational resources on “struggling” processes. The research is focused on optimization of communication structures that maximize algorithmic efficiency using the theoretical framework of Markov chains. Existing research addressing communication between the cooperative solvers on parallel systems lacks generality: Most studies consider a limited number of communication topologies and strategies, while the …

Human Fatigue Predictions In Complex Aviation Crew Operational Impact Conditions, Suresh Rangan

Doctoral Dissertations

In this last decade, several regulatory frameworks across the world in all modes of transportation had brought fatigue and its risk management in operations to the forefront. Of all transportation modes air travel has been the safest means of transportation. Still as part of continuous improvement efforts, regulators are insisting the operators to adopt strong fatigue science and its foundational principles to reinforce safety risk assessment and management. Fatigue risk management is a data driven system that finds a realistic balance between safety and productivity in an organization. This work discusses the effects of mathematical modeling of fatigue and its …

Models, Theoretical Properties, And Solution Approaches For Stochastic Programming With Endogenous Uncertainty, Tanveer Hossain Bhuiyan

Doctoral Dissertations

In a typical optimization problem, uncertainty does not depend on the decisions being made in the optimization routine. But, in many application areas, decisions affect underlying uncertainty (endogenous uncertainty), either altering the probability distributions or the timing at which the uncertainty is resolved. Stochastic programming is a widely used method in optimization under uncertainty. Though plenty of research exists on stochastic programming where decisions affect the timing at which uncertainty is resolved, much less work has been done on stochastic programming where decisions alter probability distributions of uncertain parameters. Therefore, we propose methodologies for the latter category of optimization under …

Examining The Empirical Relationship Between Subjective Fatigue And Employee Work Engagement In A Heavy Workload Manufacturing Environment, Prashanth Balasubramanian

Masters Theses

The purpose of this study was to examine the empirical relationship between Subjective Fatigue and Employee work engagement among employees working under heavy workload conditions in Tennessee, USA. The questionnaire was developed by reviewing extant literature and the factors that were chosen were subjected to exploratory factor analysis. Post elimination of the weakly loaded factors, a questionnaire based on the selected factors was designed to measure the subjective levels of fatigue. The data was collected from two manufacturing company sites from East Tennessee and was subjected to analysis using IBM SPSS and SmartPLS softwares. As a part of the SEM …

Thorium Dioxide Extraction From Monazite Ore, Jason Pan, Niall Phelan Terry, Katherine Glass, Eli Jenkins, Connor High

Chancellor’s Honors Program Projects

No abstract provided.

Supplier Ranking System And Its Effect On The Reliability Of The Supply Chain, Farshad Rabib

Doctoral Dissertations

Today, due to the growing use of social media and an increase in the number of

A HITS with a solution in PageRank (Massimo, 2011) sharing their opinions globally, customers can review products and services in many novel ways. However, since most reviewers lack in-depth technical knowledge, the true picture concerning product quality remains unclear. Furthermore, although product defects may come from the supplier side, making it responsible for repair cost, it is ultimately the manufacturer whose name is damaged when such defects are revealed. In this context, we need to revisit the cost vs. quality equations. Observations of customer …

Dual Degree Agreement For College Of Engineering With Tennessee Wesleyan, University Of Tennessee, Knoxville

SACSCOC Documentation

No abstract provided.

Interfaith Health Clinic Electronic Records Implementation Of Standard Operating Procedures, Payton E. Garland, Emily Mae Diehl, Clark Michael Legac, Joshua Presnell

Chancellor’s Honors Program Projects

No abstract provided.

Extraction Of Thorium Dioxide And Other Ree Oxides From Monazite Ore, Bradley M. Bennett, Julia Johnson, Kelsey Hay, Chelsea Connolly-Horton

Chancellor’s Honors Program Projects

No abstract provided.

Applications Of Optimization Modeling In Multi-Disciplinary Engineering Research, Anton F. Astner, Ekramul Haque Ehite, Yang Li, Colin Sasthav

Biosystems Engineering and Soil Science Publications and Other Works

Optimization modeling is the process of selection of the best solution to a design problem using predetermined constraints from a set of prospective solutions. Increased computing power has made optimization solvers readily available for business/research needs. For example, Microsoft Excel has a simple, but robust solver. Such solvers can model linear, nonlinear, and integer programming problems that are limited in size. This study shows the use of the optimization model solvers in various research contexts.

Improving Production Flexibility, Christopher T. Patrick, Conrad R. Troutman, Adam Glassman, Kaitlin Payne

Faculty Publications and Other Works -- Industrial & Information Engineering

Over the last year, Clayton has paired with the University of Tennessee in order to increase production rates at their Rutledge facility due to a high demand for their homes. Other concerns expressed by Clayton included high employee turnover, fluctuation in demand throughout the year, and lack of space within the facility. Several teams from the University were assigned to this location with the goal of observing and increasing throughput and flexibility within the facility while considering the previously stated issues.

Chassis Production Process, Abigail H. Harr 7741954

Chancellor’s Honors Program Projects

No abstract provided.

Aligning Skills In Personnel With The Lean System's Requirements, Anjushree Bangre

Masters Theses

The sustainability of lean systems for long term is a major concern across various organizations implementing lean manufacturing methods. This issue can be attributed to inadequate infrastructure, inefficient process management, unsuitable personnel management methods and strategic tools. There is a strong need for addressing the risks for lean system sustainability. The resolution of the risks from a 'soft side' (people) perspective has not been addressed. The primary focus of this study is on the people-related risks.

The current study elicits a five-phase approach to enhance the implementation of the lean system by accounting for these risks. The first phase classifies …

Developing Leading And Lagging Indicators To Enhance Equipment Reliability In A Lean System, Dhanush Agara Mallesh

Masters Theses

With increasing complexity in equipment, the failure rates are becoming a critical metric due to the unplanned maintenance in a production environment. Unplanned maintenance in manufacturing process is created issues with downtimes and decreasing the reliability of equipment. Failures in equipment have resulted in the loss of revenue to organizations encouraging maintenance practitioners to analyze ways to change unplanned to planned maintenance. Efficient failure prediction models are being developed to learn about the failures in advance. With this information, failures predicted can reduce the downtimes in the system and improve the throughput.

The goal of this thesis is to predict …

Developing A Platform For Integrating Disability Issues Into City Municipality Decisions; Case Study: City Of Knoxville, Sravanthi Pamu

Masters Theses

The People with Disabilities (PWD) & Senior Citizen (SC) are isolated from the mainstream society, and they face several barriers in everyday life. There is no communication platform for them to express their concerns, in turn, participate in the city municipality policy decisions related to PWD- & SC-friendly city development. The purpose of this research is to integrate disability and senior citizen issues in the city of Knoxville to the city council decisions. The comprehensive literature search is done to identify the frequently mentioned disability and age-friendly city factors. An effective survey was designed to identify the issues in collaboration …

Impacts Of The Heterogeneity In Consumer Valuation Of Fuel Economy On Corporate Average Fuel Economy Standards Compliance, Nawei Liu

Masters Theses

This study investigated potential impacts of the heterogeneity in consumer valuation of fuel economy on the compliance with fuel economy standards with two analytical approaches. One approach is to provide theoretical analysis of the heterogeneity impacts on the market acceptance of high-efficiency vehicles. The other approach utilizes a consumer choice based simulation method to analyze the heterogeneity impacts on the compliance with the Corporate Average Fuel Economy (CAFE) Standards for the entire light duty vehicle fleet in the U.S. Our findings suggest two possible conditions which are defined based on relative acceptance of high-efficiency vehicles in the market, and they …

Flight Risk Management And Crew Reserve Optimization, Ying Zhang

Doctoral Dissertations

There are two key concerns in the development process of aviation. One is safety, and the other is cost. An airline running with high safety and low cost must be the most competitive one in the market. This work investigates two research efforts respectively relevant to these two concerns.

When building support of a real time Flight Risk Assessment and Mitigation System (FRAMS), a sequential multi-stage approach is developed. The whole risk management process is considered in order to improve the safety of each flight by integrating AHP and FTA technique to describe the framework of all levels of risks …

An Optimization Framework For Integrating Variable Capacity And Pavement Thickness Requirements In Highway Cost Allocation, Saurav Kumar Dubey

Doctoral Dissertations

The objective of Highway Cost Allocation (HCA) is to distribute or allocate in a fair and rational manner the cost of a transportation facility (either a highway or bridge) among all vehicle classes using it. The purpose of this dissertation is to study and enhance a model, known as the least-core model, to include both pavement thickness and traffic capacity requirements for all coalitions formed with a given group of vehicle classes. Considering vehicle classes as players and groups of vehicle classes as coalitions, it is possible to quantify the thickness and width of pavement needed to accommodate the vehicle …

A Model For Sustaining New Technology Based On Government Incentives, Girish Upreti

Doctoral Dissertations

The diffusion of new technology that provides environmental benefits may require government incentives for a duration of time, especially when the technology is expensive. The Center of Systems Research and Education (CASRE) model is developed that analyzes the impact of incentives in sustaining new technologies to allow their social acceptance. The CASRE model includes both demand and supply variables associated with incentive policy to sustain new technology. The key to market dissemination and sustainability is the Investment Tax Credit (ITC) levels provided by the government. The level of ITC is based on the current cost to the customer and the …

Model For Prioritization Of High Variation Elements In Discrete Production Systems, Bharadwaj Venkatesan

Doctoral Dissertations

The complexity of the modern manufacturing enterprise has led companies to look for techniques and methodologies for improving production performance. Lean manufacturing techniques have been applied in the US with varying degrees of success, and Theory of Constraints (TOC) has been used to emphasize the flow of production and identify performance improvement projects. One aspect of manufacturing for which there has been limited academic or industrial research till date is the impact of variation on production performance and the identification of improvement projects based on variation. This thesis develops a methodology to incorporate random and simultaneous occurrence of variability in …

Sustainability Analysis For New Technologies Of Biofuels And Additive Manufacturing, Nelson A. Granda Marulanda

Doctoral Dissertations

This work is a compendium of different sustainability analysis on new technologies. The first chapter performed a Life Cycle Analysis of a biofuel process where pine woodchips are used to create SynGas. The study was done using a 10 tons gasifier, the mass balance of the reaction and an input/output analysis. All the data obtained was input into a freeware LCA software and the results were compared to the use of regular produced natural gas. The second chapter creates a benchmark of energy intensity and presents a case using binder jetting technology. Different Additive Manufacturing technologies energy intensity was reported, …

Two Multi-Objective Stochastic Models For Project Team Formation Under Uncertainty In Time Requirements, Fahimeh Rahmanniyay

Masters Theses

Team formation is one of the key stages in project management. The cost associated with the individuals who form a team and the quality of the tasks completed by the team are two of the main concerns in team formation problems. In this study, two mathematical models to optimize simultaneously cost and quality in a team formation problem are developed. Because team formation problem arises in uncertain environment, different scenarios are defined for the time requirement of the project. Two-stage stochastic programming and multi-stage stochastic programming are applied to solve the first and the second model respectively. The presented models …

Exploring A Semi-Virtual Reality System Impacting Learning Curves Of College Students, Hongbiao Yang

Doctoral Dissertations

Virtual reality (VR) is a trending technology used in a broad range of fields including education and has become one of the most promising directions for educators. In this research, the investigation focuses on how the semi-immersive VR application can be used for educational purposes by exploring the VR factors and the interactions between these factors. A theoretical learning framework is also proposed to offer an explanation for the beneficial effects of education brought by VR at a high level.

This research consists of three parts. First, this research will introduce the development of Walk-in-Place Learning System (WIPLS), a semi-immersive …

Transition To Electric Vehicles In The California Automobile Industry, Jinglu Song

Doctoral Dissertations

This dissertation presents a comprehensive study on the market adoption of electric vehicle and policy impact of the Zero Emission Vehicle (ZEV) mandate in the California automotive market. This research is primarily consisting of three parts. The author first built a technology innovation pricing model based on multi-nomial logit modelling method. This studies the dynamics among customer preferences, market acceptance and policy impact on vehicle pricing in the California automotive market. Results show that the ZEV mandate could profoundly enhance the market adoption of electric vehicles. There is a threshold on the magnitude of policy intervention. If the number of …

Electricity And Fuel Consumption In A Lean Energy Supply Chain, Mostafa Ghafoorivarzaneh

Doctoral Dissertations

Human activities are the main sources of environmental pollution. Awareness about this fact, motivated us to make changes in different paradigms of our lives including industrial or personal activities. Environmental activities assumed to have conflict with financial objectives, in this study we try to align business requirements with environmental concerns.

Among all human activities, generating energy has the most negative impact on the environment. The major part of the generated energy will be consumed in transportation and industrial demand which makes them the most effective targets for the reduction of greenhouse gas emission. In a lean environment, small batch sizes …

Viability Of Additive Manufacturing For Production And Tooling Applications: A Development Of The Business Case, Christopher Charles Griffin

Masters Theses

As marketplace competition drives industrial innovation to increase product value and decrease production costs, emerging technologies foster a new era through Industry 4.0. One aspect of the movement, additive manufacturing, or 3D [three-dimensional] printing, contains potential to revolutionize traditional manufacturing techniques and approach to design. However, uncertainties within the processes and high investment costs deter corporations from implementing and developing the technology. While several industries are benefitting from additive manufacturing’s current state, as the technology continues to progress, more companies will need to evaluate it for industrial viability and adoption. As such, there exists a need for a framework to …

Reducing Wait Time Prediction In Hospital Emergency Room: Lean Analysis Using A Random Forest Model, Gajanan Arha

Masters Theses

Most of the patients visiting emergency departments face long waiting times due to overcrowding which is a major concern across the hospital in the United States. Emergency Department (ED) overcrowding is a common phenomenon across hospitals, which leads to issues for the hospital management, such as increased patient s dissatisfaction and an increase in the number of patients choosing to terminate their ED visit without being attended to by a medical healthcare professional. Patients who have to Leave Without Being Seen (LWBS) by doctors often leads to loss of revenue to hospitals encouraging healthcare professionals to analyze ways to improve …

Constrained Multi-Group Project Allocation Using Mahalanobis Distance, Abdulaziz Saud Alkabaa

Doctoral Dissertations

Optimal allocation is one of the most active research areas in operation research using binary integer variables. The allocation of multi constrained projects among several options available along a given planning horizon is an especially significant problem in the general area of item classification. The main goal of this dissertation is to develop an analytical approach for selecting projects that would be most attractive from an economic point of view to be developed or allocated among several options, such as in-house engineers and private contractors (in transportation projects). A relevant limiting resource in addition to the availability of funds is …

Integrating The Cost Of Quality Into Multi-Products Multi-Components Supply Chain Network Design, Waleed Abdussalam Gueir

Doctoral Dissertations

More than ever before the success of a company heavily depends on its supply chain and how efficient the network. A supply chain needs to be configured in such a manner as to minimize cost while still maintaining a good quality level to satisfy the end user and to be efficient, designing for the network and the whole chain is important. Including the cost of quality into the process of designing the network can be rewording and revealing. In this research the concept of cost of quality as a performance measure was integrated into the supply chain network designing process …

Development Of Instrumentation And Control Systems For An Integral Large Scale Pressurized Water Reactor, Matthew Rowland Morrow Lish

Doctoral Dissertations

Small and large scale integral light water reactors are being developed to supply electrical power and to meet the needs of process heat, primarily for water desalination. This dissertation research focuses on the instrumentation and control of a large integral inherently safe light water reactor (designated as I²S-LWR) which is being designed as part of a grant by the U.S. Department of Energy Integrated Research Project (IRP). This 969 MWe integral pressurized water reactor (PWR) incorporates as many passive safety features as possible while maintaining competitive costs with current light water reactors. In support of this work, the …