Engineering Education Commons^™

Work In Progress -- Does A Technology-Rich Transportation Engineering Experiences Increase Interest In Civil Engineering, Marissa K. Orr, Sanjay Tewari, David E. Hall, Norman D. Pumphrey

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper examines whether a technology-rich transportation engineering experience generates interest among college freshman students towards transportation related degrees and careers, specifically, whether it increases interest in civil engineering. Louisiana Tech’s first-year engineering experience provides relevant, project-focused education for over 500 students each year and an opportunity to introduce transportation-related projects. The six semester-hour, three-course sequence, called “Living with the Lab,” boosts experiential learning through student ownership of inexpensive laboratory equipment. In one section of the Living with the Lab course, a transportation engineer visited the class and the students were led through a technology-rich transportation engineering activity. They used …

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Low energy surfaces can strongly repel both oil and water. Recently these surfaces have been fabricated on various substrates including fabric, aluminum, stainless steel and many other materials. In this experiment we explore the use of low energy surface deposition on aluminum alloy, stainless steel and silicon substrates, to enhance the drying rate of liquids removed from the surface by forced convection. We control surface roughness by substrate abrasion and by the growth of Al₂O₃ nanograss to enhance liquid repellence by use of a hierarchical texture. Liquid repellence of the substrates is measured by contact angles of …

The Effects Of Interactive Computer Simulation And Animation On Student Learning Of Rigid Body Dynamics: A Mixed Method Study, Oai Ha

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Engineering Dynamics (ED) courses are known as challenging and demanding for undergraduate students majored in many engineering fields, such as mechanical and aerospace engineering and civil and environmental engineering. The course is built upon the foundation and framework of mathematics and physics and requires students to have strong abstract thinking and reasoning skills. Rigid body dynamics (RBD), the second part of ED, investigates kinematics and kinetics of rigid bodies and is considered as a difficult subject by many undergraduate students because the course requires them to visualize abstract objects in motions. Although there have been many studies reporting the uses …

By Design: Ethics, Theology, And The Practice Of Engineering, Brad Kallenberg

Brad J. Kallenberg

Both engineering and human living take place in a messy world, one chock full of unknowns and contingencies. "Design reasoning" is the way engineers cope with real-world contingency. Because of the messiness, books about engineering design cannot have "ideal solutions" printed in the back in the same way that mathematics textbooks can. Design reasoning does not produce a single, ideally correct answer to a given problem but rather generates a wide variety of rival solutions that vie against each other for their relative level of "satisfactoriness." A reasoning process analogous to design is needed in ethics. Since the realm of …

A Course In Sustainable Manufacturing, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

Sustainable manufacturing is a vision that the manufacturing community has for contributing to the global society's ability to address sustainability issues. While there is no standard definition of sustainable manufacturing, one universally accepted notion is that sustainable manufacturing must optimally address a comprehensive set of highly interdependent objectives from environmental, economic and social perspectives. This is impossible without systems' thinking that guides the sustainable manufacturing activities every step of the way from product idea generation, to adoption of sustainable design and manufacturing processes, to selection of sustainable materials, and ultimately to product disposal, reuse or recycling. New course on sustainable …

Student Writing Competition

International Journal of Nuclear Security

No abstract provided.

Masthead

International Journal of Nuclear Security

No abstract provided.

Cover

International Journal of Nuclear Security

No abstract provided.

From The Editor

International Journal of Nuclear Security

No abstract provided.

Iron Range Engineering Pbl Experience, Ron Ulseth, Bart Johnson

Integrated Engineering Department Publications

A new PBL model started in 2010 in Minnesota, United States. The PBL model is upper-division (the last two years of four-year bachelor’s of engineering degree). Entering students are graduates of Minnesota’s community colleges. The Aalborg PBL model served as an inspiration for the program’s development. Unique attributes of the program include industry clients, semester-long projects, emphasis on development of self-regulated learning abilities, dedicated project rooms, technical competence learned in one-credit, small (3-4 student) groups with one academic staff called learning competencies, and an emphasis on continuous improvement. The program has earned ABET accreditation. Seventy-five students have graduated and are …

Professional Competency Development In A Pbl Curriculum, Bart Johnson, Ron Ulseth

Integrated Engineering Department Publications

Substantial dialogue exists regarding the needs of the engineering profession and the changes in engineering education necessary to meet them. Important to this change is an increased emphasis on the professional competencies as identified by the Washington Accord and the ABET professional skills for engineering graduates and how to educate for them. This paper will explore the potential for a project based learning engineering curriculum model to meet this need. It will summarize a newly developed upper-division undergraduate project-based learning (PBL) engineering program in the U.S. engineering educational system and its approach to professional competency development. Based on the ABET …

Priming Middle School Females’ Engagement In Engineering And Technology, Mary Bonk Isaac

STEMPS Theses & Dissertations

The purpose of this study was to validate data collected between 2009-2013 via an instrument used to assess middle school girls’ identification with and interest in engineering and technology following the Society of Women Engineers’ WOW events. Recognizing the importance of measuring the impact of such mentored E & T activities on young females’ attitudes about and interest in STEM, and more specifically, engineering and technology, SWE outreach experts developed a participant survey based on event objectives and domain knowledge, but never rigorously examined whether it produced statistically valid data that could be used to draw inferences about girls’ propensity …

A Developmental Model Of Research Mentoring, Renata A. Revelo, Michael Loui

School of Engineering Education Faculty Publications

We studied mentoring relationships between undergraduate and graduate students in a summer undergraduate research program, over three years. Using a grounded theory approach, we created a model of research mentoring that describes how the roles of the mentor and the student can change. Whereas previous models of research mentoring ignored student roles and treated mentor roles as static, our model focuses on the development of the mentoring relationship over time. Our model explains how conflicts can occur if the mentor role does not match the maturity level of the student.

Using Thermocouple, Thermistor, And Digital Sensors To Characterize The Thermal Wake Below Ascending Weather Balloons, Erick Agrimson, Kaye Smith, Rachel Newman, Kassandra Surma, Maggie Singerhouse, Britany Craig, Marilyn Mcnamara, James Flaten, Alex Pratt, Stephanie Wegner, Joe Dillon

2017 Academic High Altitude Conference

In this paper we present additional results from our on-going research effort to characterize the thermal wake that trails below ascending latex weather balloons on flights into the stratosphere; a wake which interferes with the ability of temperature sensors in payload boxes hanging from the balloon (and hence enveloped by the wake) to correctly measure the ambient temperature of the atmosphere through which the balloon is ascending. A “wake boom” is used to measure temperature variations up to 1.5 m horizontally from varying distances directly below the neck of the balloon. Results to date agree with the literature that especially …

Leading Large-Scale Change In An Engineering Program, Cheryl Allendoerfer, Rebecca Bates, Jennifer Karlin, Ron Ulseth, Dan Ewert

Integrated Engineering Department Publications

While many efforts have been made to improve technical and professional skills in engineering graduates, there has been little comprehensive change in the pedagogy of most engineering education institutions in the U.S. Many of these efforts involve changing only one or two aspects of the curriculum, and therefore are less likely to make significant changes in the student learning outcomes. For better success, engineering curricular changes will need to address the entire education system. In order to see real, sustainable improvement in engineering education practice, both the behaviors of the participants and the systems within which these participants act must …

Virtual Peer Teams: Connecting Students With The Online Work Environment, Thalia Anagnos, Alicia Lyman-Holt, Sean Brophy

Faculty Publications

This study examined the potential of online collaboration tools to develop team cohesiveness and research skills of undergraduates participating in Virtual Peer Teams (VPTs) in a geographically distributed research experience for undergraduates (REU). The VPTs mimic geographically dispersed virtual teams that are now common in industry. VPTs consisted of four to six students from multiple REU sites around the United States who were asked to experiment with various collaboration and social network technologies to complete specified research-based and social tasks. Surveys were used to collect formative and summative feedback. Students agreed their VPT experiences were significant in their professional development …

Evidence Of Students’ Engineering Learning In An Elementary Classroom, Kristina Tank, Tamara Moore, Bunmi Babajide, Anastasia M Rynearson

School of Engineering Education Faculty Publications

Evidence of Students’ Engineering Learning in an Elementary Classroom Over the past decade there has been an increased emphasis on improving the teaching andlearning of Science, Technology, Engineering, and Mathematics (STEM) disciplines.With the publication of the Next Generation Science Standards (NGSS) in 2013, whichcall for the integration of science and engineering concepts and practices in K-12classrooms, there has also been an increased emphasis on engineering education at the K-12 level. However, given that engineering integration at the elementary level is stillrelatively recent, there is a need for research in the area of engineering education toexamine how these national documents and …

Optimizing Student Team Skill Development Using Evidence-Based Strategies—Nsf Award 1431694, Matthew Ohland, Misty Loughry, David J. Woehr, Richard Layton, Daniel Ferguson

School of Engineering Education Faculty Publications

Optimizing Student Team Skill Development using Evidence‐Based Strategies NSF Award 1431694 The broad goal of this work is to study the effectiveness of various teamwork training interventions. This research requires the use of a common model of teamwork and a system for training, collecting ratings data, and providing feedback. We will leverage the NSF’s prior investment in the CATME system, which meets the research criteria and automates some of the data collection and feedback, which will aid in executing the research protocol consistently. Seven empirical studies will determine the effect sizes of training, practice in teams, practice rating, and feedback …

The Rapid Adoption Of Smarter Teamwork Tools: The System For Management, Assessment, Research, Training, Education, And Remediation For Teamwork, Matthew Ohland, Misty Loughry, Richard Layton, David Jonathan Woehr, Daniel Ferguson

School of Engineering Education Faculty Publications

The Rapid Adoption of SMARTER Teamwork Tools: the System for Management, Assessment, Research, Training, Education, and Remediation for TeamworkThe rapid adoption of Team-Maker and the Comprehensive Assessment of Team MemberEffectiveness (CATME) tools for team formation and peer evaluation make it possible to extendtheir success to have a significant impact on the development of team skills in higher education.As of October 19, 2014, the web-based systems have been used by more than 300,000 studentsof more than 6000 faculty at more than 1100 institutions in 59 countries—the figure belowshows the growth of the user base at the end of September.This paper and …

Measuring The Effects Of Pre-College Engineering Experiences, Year 2, Noah Salzman, Matthew Ohland, Monica Cardella

School of Engineering Education Faculty Publications

Measuring the Effects of Pre-College Engineering ExperiencesThe implementation of co-curricular and extracurricular pre-college engineering programs hasexpanded dramatically in recent years. Many states now include engineering as part of theireducation standards for both students and teachers, reflecting the increasing acceptance ofengineering at the K-12 level and its potential value to students. In addition to promotingoutcomes that benefit all students regardless of career aspirations such as increased math andscience achievement and greater technological literacy, K-12 engineering programs have beenidentified as a means of recruiting and retaining potential students in engineering.The growth of pre-college engineering programs means that increasing numbers of incomingengineering students …

Engineering Pathways Of Nontraditional Students—An Update On Nsf Award 1361058, Jaqi Mcneil, Matthew Ohland, Russell Long

School of Engineering Education Faculty Publications

Engineering Pathways of Nontraditional Students—an Update on NSF Award 1361058 A large‐scale longitudinal study of nontraditional engineering students has provided descriptive information about the access, pathways, and success of nontraditional engineering students. Nontraditional students hold the potential to increase not only the number of engineering students, but also the diversity of the engineering student body. This descriptive study laid the groundwork for a larger study of nontraditional student pathways. The study of nontraditional student pathways will reveal patterns in how nontraditional students choose majors, how they migrate, and where they succeed. This study uses the Multiple‐Institution Database for Investigating Engineering …

Exploring Military Veteran Students’ Pathways In Engineering Education, Joyce Main, Catherine Brawner, Susan M. Lord, Catherine Mobley, Michelle Camacho

School of Engineering Education Faculty Publications

Military Veteran Students’ Pathways in Engineering Education (Year 1: Award# 1428646)Military veterans hold tremendous promise for expanding and diversifying the engineeringworkforce. Given the diverse backgrounds of veterans, their increasing numbers, and thegrowing national demand for engineering professionals, the timing is ideal to study theconditions under which student veterans pursue engineering education and the factors that offerthem the greatest support for success. Increasing the participation of veterans in engineeringoffers the possibility of enhancing engineering’s diversity in many needed dimensions since,compared to civilian students, veterans are more likely to be older, first-generation collegestudents, disabled, African American, or Latino. Yet, little is known …

Identifying Key Factors Of Engineering Innovativeness, Kathryn Jabloklow, Senay Purzer, Daniel Ferguson, Matthew Ohland, Jessica Menold

School of Engineering Education Faculty Publications

Identifying key factors of engineering innovativenessSignificant resources are spent nationally and locally to foster innovation, yet limited research exists onthe personal characteristics of innovators, especially those found in engineering. This three-yearcollaborative research project, currently in its second year, has led to the identification of specificattributes associated with engineering innovators, with the potential to inform a broad range of people,from engineering students to engineering educators to practicing engineers and their managers. Throughthis project, we have developed a socially constructed set of key engineering innovativenesscharacteristics based on the views of a diverse group of engineering innovation experts. We have alsodetermined which characteristics …

Informal Pathways To Engineering: Interim Findings From A Longitudinal Study, Christine Paulsen, Monica Cardella, Tamecia Jones, Marisa Wolsky

School of Engineering Education Faculty Publications

Informal Pathways to Engineering: Interim Findings This study, based on social cognitive career theory, seeks to investigate the effect of informal, out­of­school activities, as well as other factors (self­efficacy, outcome expectations, and personal interests, and intrapersonal factors) on students’ interest in engineering and decisions to engage in engineering­related activities. The study uses a longitudinal design in which children, parents, and educators (classroom teachers, school principals, and informal educators) are interviewed and surveyed over a period of three years (corresponding with the middle school years). Thirty families from Massachusetts and 30 families from Indiana were enrolled in the study in Year …

Large-Scale Research On Engineering Design In Secondary Classrooms: Big Learner Data Using Energy3d Computer-Aided Design, Senay Purzer, Robin Adams, Molly Goldstein, K. Anna Douglas

School of Engineering Education Faculty Publications

Large-scale Research on Engineering Design in Secondary Classrooms: Big Learner Data Using Energy3D Computer-Aided Design Through a five-year collaborative project, the Concord Consortium and PurdueUniversity are applying a data-intensive approach to study one of the most fundamental researchtopics in learning sciences: “How do secondary students learn and apply science concepts inengineering design processes?” We have collected more 2GB of structured data from secondaryschool students in Indiana and Massachusetts through automatic, unobtrusive logging of studentdesign processes enabled by a unique CAD tool that supports the design of energy-efficientbuildings using Earth science and physical science concepts. Data includes fine-grainedinformation of student actions, …

Identifying Sources Of Information That Students Use In Deciding Which Engineering Major To Pursue, Héctor E. Rodríguez-Simmonds, Juan D. Ortega-Alvarez, S. Zahra Atiq, Stephen R. Hoffmann

School of Engineering Education Graduate Student Series

This study explores the sources of information that first year engineering students use to decide which engineering major to pursue for their undergraduate studies. The purposes of this study are twofold: (1) to understand how students make an informed decision of which engineering major to pursue and (2) to help the First Year Engineering (FYE) program administration improve the informational resources they provide the students. This study was framed within the FYE population of a large Midwestern university and was commissioned by the FYE program.

FYE administration conducts regular student surveys for feedback and improvement purposes. We analyzed different survey …

Academic Outcomes Of Cooperative Education Participation, Nichole Ramirez, Joyce Main, Matthew Ohland

School of Engineering Education Graduate Student Series

Academic Outcomes of Cooperative Education ParticipationOutcomes and benefits of cooperative education (co-op) participation have been welldocumented; however, they have focused primarily on grade point averages (GPA) and careeroutcomes. Previous work on predictors of participation shows no significant differences bygender in the aggregate, but there are significant differences by ethnicity and major. Women inMechanical Engineering and Aerospace Engineering (especially Hispanic women) persist athigher rates than men, possibly indicating that gender becomes significant in academicoutcomes. One reason students may not participate in co-op is the perception of increased time tograduation; however, other benefits may outweigh that. This research furthers the literature byexamining …

Developing And Advancing A Cyberinfrastructure To Gain Insights Into Research Investments: An Organizing Research Framework, Ann Mckenna, Jeremi London, Aditya Johri, Mihaela Vorvoreanu, Cm@Purdue.Edu Krishna Madhavan

School of Engineering Education Faculty Publications

Developing and Advancing a Cyberinfrastructure to Gain Insights into Research Investments: An Organizing Research Framework Although the National Science Foundation (NSF) funds approximately 24% of basic research conducted in America’s colleges and universities (NSF), there is little we know about how NSF-­‐funding decisions have resulted in the current research landscape. This gap was the impetus for a project –Deep Insights Anytime, Anywhere (DIA2)— that begins to address this problem by focusing on NSF investments in undergraduate STEM education research, and how education innovations make an impact and diffuse throughout the STEM education community. The project team has designed an information …

Mathematics As A Gatekeeper To Engineering: Preliminary Findings From The Interview Data, Delean Tolbert, Monica Cardella

School of Engineering Education Graduate Student Series

Mathematics as a Gatekeeper to Engineering: Preliminary Findings from the Interview DataResearch suggests that students’ pre-college experience may support or hinder future success inengineering. The experiences that students have had with engineering may shape their perceptionof engineering curriculum at the college level. It may also cause cognitive and learningdissonance, when the ways that a student engaged with engineering activities at the pre-collegelevel do not align with the student’s experiences in the engineering classroom. At a largeMidwestern University with a unique first-year engineering program, first-year engineering andsenior mathematics, engineering, and design students were invited to participate in an openended design task. …

Characterizing And Modeling The Experience Of Transfer Students In Engineering—Progress On Nsf Award 0969474, Matthew Ohland, Clemencia M. Cosentino, Catherine E. Brawner, Catherine Mobley, Russell A. Long

School of Engineering Education Faculty Publications

Characterizing and Modeling the Experience of Transfer Students in Engineering— Progress on NSF Award 0969474Quantitative analysis of MIDFIELD databaseOur analysis used records for 94,732 undergraduate students from the Multiple-InstitutionDatabase for Investigating Engineering Longitudinal Development (MIDFIELD). MIDFIELDcomprises a census of undergraduate students who attended 11 public institutions between 1988and 2008. MIDFIELD institutions represent public universities that educate large numbers ofengineering students.From the 977,950 records available, we restricted our sample to those who (1) were domesticstudents (927,350), (2) were in the data set early enough for us to observe the possibility ofgraduation within six years (677,691), and (3) declared a major in …