Engineering Education Commons^™

Search And Review Of The Literature On Engineering Design Challenges In Secondary School Settings, Matthew Lammi, Cameron Denson, Paul Asunda

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design activities offer the promise of enhanced learning and teaching in pre-college science, technology, engineering, and mathematics (STEM) settings. The wide variation and lack of coherence in research and practice concerning pre-college engineering design challenges necessitates an investigation of the literature. The overarching research question guiding this search and review of literature was, ‘‘How are engineering design challenges conceptualized in pre-college environments?’’ A search and review coupled with iterative thematic analysis was employed to understand and conceptualize the current body of literature on pre-college engineering design challenges. It is anticipated that this review will provide a general picture of …

Effects Of Light Intensity On Spatial Visualization Ability, Petros J. Katsioloudis ., Mildred Jones

STEMPS Faculty Publications

A plethora of technological advances have happened since artificial illumination was developed by Thomas Edison. Like technology has had an effect in many areas in the modern civilization it also made a difference in the classroom. Nowadays, students can have instruction in classrooms with no external windows, even during gloomy winter or rainy days, and virtually during any hour of the day. Several lightning devices are being used, ranging from energy efficient LEDs to fluorescent lighting. Some forms of lighting methods have been found to be inappropriate for prolonged exposure to the human eye such as various gas-discharge lamps that …

Comparing High School Students' And Adults' Perceptions Of Technology, Henry L. (Hal) Harrison Ii, Philip A. Reed

STEMPS Faculty Publications

This study compared high school student’s perceptions of technology and technological literacy to those perceptions of the general public. Additionally, individual student groups were compared statistically to determine significant differences between the groups. The ITEA/Gallup Poll instrument was used to survey high school student’s perceptions of technology in the study. The student population in question consisted of three subgroups: students enrolled in a standards-based technology education courses, students enrolled in a Project Lead the Way (PLTW) Principles of Engineering pre-engineering course, and students enrolled in a general education course (language arts, mathematics, or science). In addition, each student group’s perceptions …

Use Of Dynamic Visualizations For Engineering Technology, Industrial Technology, And Science Education Students: Implications On Ability To Correctly Create A Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred V. Jones

Engineering Technology Faculty Publications

Spatial abilities, specifically visualization, play a significant role in the achievement in a wide array of professions including, but not limited to, engineering, technical, mathematical, and scientific professions. However, there is little correlation between the advantages of spatial ability as measured through the creation of a sectional-view sketch between engineering technology, industrial technology, and science education students. A causal-comparative study was selected as a means to perform the comparative analysis of spatial visualization ability. This study was done to determine the existence of statistically significant difference between engineering technology, industrial technology, and science education students’ ability to correctly create a …

Web Tools: Keeping Learners On Pace, Mickey Kosloski

STEMPS Faculty Publications

One of the greatest challenges in teaching technology and engineering is pacing. Some students grasp new technological concepts quickly, while others need repetition and may struggle to keep pace. This poses an obstacle for the technology and engineering teacher, and is particularly true when teaching students to build a website. However, there are a plethora of online tools available that can assist learners in building a website. This article identifies some of the tools that may be used in the classroom and for classroom-oriented, teacher-hosted websites. While specific examples are provided, Web search terms are denoted at the end of …

Quantifying The Information Habits Of High School Students Engaged In Engineering Design, Nathan Mentzer, Michael J. Fosmire

Journal of Pre-College Engineering Education Research (J-PEER)

stract This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students’ process, and if it impacted their thinking during the activity. Students overwhelmingly relied on internet searching to acquire information, rather than printed materials available to them. The sites they found were generally popular rather than technical, and persuasive (i.e., trying to sell something) rather than informative. The high school students understood the need for information, as they sought …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Transforming Information Systems And Computer Science Education With Virtualization, Maurice E. Dawson Jr., Jorja Wright, Jonathan Abramson

Maurice Dawson

This paper will propose an innovative method to transform information systems (IS) and computer science education on a global scale. This method will introduce the use of virtualization and cloud computing combined with open source software (OSS) in higher education. This will allow for those studying IS and computer science to work independently on projects anywhere in the world from a baseline image that has been developed with information assurance (IA) controls. Additionally, this will allow professors and course developers to deploy their own customized virtual machines (VMs) to be used with the course. These VMs will host their own …

Future Critical Issues And Problems Facing Technology And Engineering Education In The Commonwealth Of Virginia, Petros Katsioloudis, Johnny J. Moye

STEMPS Faculty Publications

The purpose of this research was to determine the future critical issues and problems facing the K-12 technology and engineering education profession in the Commonwealth of Virginia. This study was based on the Wicklein nationwide studies (1993a, 2005). Even though this study did not exactly replicate the Wicklein studies--since it was limited to the Commonwealth of Virginia--the method and questions used were identical. The modified Delphi research design was used to draw consensus among technology and engineering education experts in the Commonwealth of Virginia. Seventy-five percent of the participants agreed with one another concerning the top five critical problems and …

A Comparative Analysis Of Preferred Learning And Teaching Styles For Engineering, Industrial, And Technology Education Students And Faculty, Petros Katsioloudis, Todd D. Fantz

STEMPS Faculty Publications

No abstract provided.

Analysis Of Engineering Content With Technology Education Programs, Todd D. Fantz, Petros J. Katsioloudis

STEMPS Faculty Publications

No abstract provided.

Successful Engineering And Technology Student Mobility: Key Student Perspectives And Quality Determinants Before, During And After Student Exchange Under The Atlantis Programme, Mike Murphy, Donal Mchale, Michael Dyrenfurth

Conference papers

In this paper, we describe the lessons learned, and determinants of quality, from two Atlantis programmes. Additionally our two student authors will share key student perspectives relevant to student mobility: (1) before they visited the partner university, (2) while they were studying at the partner university and (3) after they returned to their home university. Purdue University and the Technological University Dublin, together with the Hochschule Darmstadt and Pennsylvania State University, were successful in securing an Atlantis mobility grant [1] for four years to support student and staff mobility between the United States and Europe. The programme has just completed …

Improve Or Perish, Revisited -- Again, Johnny J. Moye, Petros J. Katsioloudis

STEMPS Faculty Publications

The article reviews the articles "A Major Problem in Education: Improve or Perish," by M. Ray Karnes and "Improve or Perish-Revisited," by John V. Gallagher.

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

Integrating Engineering Design Into Technology Education: Georgia's Perspective, Cameron Denson, Todd Kelley, Robert C. Wicklein

Publications

This descriptive research study reported on Georgia’s secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants completed a Likert-type online-survey which reported on technology education teacher’s (a) current instructional practices to teach engineering-based instruction, (b) curricular value placed on engineering-based instruction, and (c) instructional needs to teach engineering-based topics. General demographic information was collected from all participants. The results from the study aided in informing the educational community on the perspective of …

A Theoretical Framework To Guide The Re-Engineering Of Technology Education, Todd R. Kelley, Nadia Kellam

Publications

Before leaders in technology education are able to identify a theoretical framework upon which a curriculum is to stand, they must first grapple with two opposing views of the purpose of technology education – education for all learners or career/technical education. Dakers (2006) identifies two opposing philosophies that can serve as a framework for technology education, both inspired by ancient Greece, with the works of Descartes and the birth of positivism. Later reappearing in Pascal’s writings of the mathematical mind, and finally with Rousseau in the mid 1700s, the theoretical arguments of academic verses vocational were established in education, and …

Using Engineering Cases In Technology Education, Todd R. Kelley

Publications

The article discusses issues related to the use of engineering case studies in technology education in K-12 classrooms. Experts from K-12 education, universities, industry and U.S. government officials came to an agreement on the need to implement engineering in K-12 schools. In relation to the proposed use of engineering case studies in technology education, several definitions of the term "design case studies." The presentation of cases using multimedia formats is also cited as a powerful format of engineering design cases.

Motivation While Designing In Engineering And Technology Education Impacted By Academic Preparation, Nathan Mentzer, Kurt Becker

Publications

The purpose of this study was to determine if high school students’ academic preparation was correlated with change in motivation during an engineering design challenge. The research was conducted in a high school classroom in which elements of engineering design were taught in a technology education context to eleventh-grade student from diverse academic backgrounds (measured by grade point average [GPA]). Participant motivation was assessed by the California Measure of Mental Motivation (CM3). The CM3 measures student motivation to apply critical thinking skills and reasoning to solve problems in five subscales: mental focus, learning orientation, creative problem solving, cognitive integrity, and …

Cognitive Processes Of Students Participating In Engineering-Focused Design Instruction, Todd R. Kelley

Publications

Since the publication of the Standards for Technological Literacy in 2000 (ITEA), there have been a number of new programs developed that are designed to teach pre-engineering. Project Lead the Way is one such program. Project Lead the Way boasts serving over 1250 schools in 44 states and teaching over 160,000 students (McVearry, 2003). Efforts are also being made to infuse engineering design into technology education programs. One example of this is the work of the National Center for Engineering and Technology Education (NCETE) partnering with high school technology educators in summer inservice workshops to help teachers develop activities and …

Analogical Reasoning In The Engineering Design Process And Technology Education Applications, Jenny Daugherty, Nathan Mentzer

Publications

This synthesis paper discusses the research exploring analogical reasoning, the role of analogies in the engineering design process, and educational applications for analogical reasoning. Researchers have discovered that analogical reasoning is often a fundamental cognitive tool in design problem solving. Regarding the possible role of analogical reasoning in the context of technology education; analogies may be a useful tool to develop student’s design skills, teach abstract or complex concepts, and build students’ analogical reasoning skills for general problem solving. The positive and negative educational implications of analogical reasoning being explored by researchers are also discussed.

Quality And Characteristics Of Recent Research In Technology Education, Scott D. Johnson, Jenny Daugherty

Publications

The focus of research in technology education has evolved throughout its history as the field changed from industrial arts to technology education (Spencer & Rogers, 2006). With the move to technology education, the field has begun to broaden its focus to better understand the teaching, learning, curriculum, and policy implications of preparing the next generation of technological thinkers. Although a complete “paradigm shift” may not have occurred completely within all technology-oriented programs (Sanders, 2001), the current emphasis on engineering within technology education indicates a need to examine and assess the status of technology education research over the past ten years …

Curricular Value And Instructional Needs For Infusing Engineering Design Into K-12 Technology Education, David K. Gattie, Robert C. Wicklein

Publications

An overarching objective of Technology Education in the U.S. is to improve technological literacy among K-12 students (DeVore, 1964; Savage and Sterry, 1990; International Technology Education Association, 1996, 2000, 2003). This is addressed in part through a focus on end-product technology and the use and importance of various technologies in society (Savage and Sterry, 1990). While such a focus is certainly necessary, it may not be sufficient if the objective is to infuse engineering into the technology education field. Current efforts at the University of Georgia propose adjusting the focus of Technology Education to a defined emphasis on engineering design …

Critical Features Of Engineering Design In Technology Education, Paul A. Asunda, Roger Hill

Publications

The purpose of this study was to find critical features of engineering design that can be incorporated within technology education learning activities, and develop a rubric for assessing these features. Data were collected through semi-structured interviews with three professors actively involved in engineering education. Supporting documents such as engineering design course outlines and rubrics were also examined. Using a phenomenological approach, this study identified the concept of engineering design, key features of the engineering design process, and critical elements that should be assessed in an engineering design activity in the context of technology education. A key product of the study …

Creativity: A Framework For The Design/Problem Solving Discourse In Technology Education, Theodore Lewis

Publications

Subjects for which aesthetics and creative performance are critical curricular dimensions (such as art, physical education, music, and technology education), and which are accommodative of students across the range of intelligences (Gardner, 1999) are not readily or completely captured by content standards. Therefore content knowledge in these fields that target student achievement as conventionally conceived must be complemented by treatment of more subjective and elusive goals such as the development of connoisseurship, appreciation, or creative insight. With the publication of standards for the subject (International Technology Education Association, 2000), the need for focus upon creativity in technology education has been …

Five Good Reasons For Engineering As The Focus For Technology Education, Robert C. Wicklein

Publications

The article presents information on a paper which discusses why engineering design should be the focus for technology education. Technology education is still viewed as a non-essential instructional program and this is because school administrators and counselors have inadequate understanding of it. Even general populace have inadequate understanding concerning technology education. The pervasiveness of technology literally affects every living creature in our society. Therefore, it is of critical importance that the educational system includes and supports the study of technology in the general curricula. The deficiency within the technology education profession to formulate a clear and defined target for the …

National Center For Engineering And Technology Education, Christine Hailey, Thomas Erekson, Kurt Becker, Maurice Thomas

Publications

The article reports that the overall impact of the National Center for Engineering and Technology Education (NCETE) is to strengthen the nation's capacity to deliver effective engineering and technology education in the K-12 schools. Further, it informs that the National Science Foundation established the Centers for Learning and Teaching (CLT) program to address needs in the science, technology, engineering, and mathematics (STEM) workforce. The CLT program has three goals, based upon stated national needs. First, CLT are expected to renew and diversify the cadre of national leaders in STEM education. The CLT includes partners with strengths in engineering and in …

President’S Message: Advancing The Tide Of Technology Education, Ethan B. Lipton

Publications

The article presents information relating to the field of technology education. Vigorous change continues in the study of technology and the delivery of technology education because of the integrating nature of technology and the need to prepare students for developing technological world to meet changing human needs. Significant strides have been made in the evolution of technology education of which we should all be very proud. In the last decade alone, the International Technology Education Association has provided the leadership for a wide range of initiatives designed to enhance technology education through technology, innovation, design, and engineering experiences at the …

A Turn To Engineering: The Continuing Struggle Of Technology Education For Legitimization As A School Subject, Theodore Lewis

Publications

In the long march from manual training, the subject which today we call technology education has always had to contend with the question of its legitimacy as valid school knowledge. In this regard, it shares a similar history of struggle with other subjects whose initial entry into the curriculum was based on a utilitarian rather than an academic rationale. Goodson (1983) documents such cases (e.g. geography and biology) showing how in their struggle for acceptance, the primary strategy of advocates was to try to enhance the academic bona fides of their subject. He explained that utilitarian knowledge is associated with …

Critical Issues And Problems In Technology Education, Robert C. Wicklein

Publications

The article informs that to address the need of identifying a comprehensive base for the critical issues and problems, research was conducted to ascertain the perspectives of classroom teachers, university professors, and supervisors of technology education. In addition, the entire population of 132 university department heads/program leaders in technology teacher education, as well as the total population of 55 state and regional supervisors, were selected to receive the survey questionnaire. The critical problem items, insufficient quantities of qualified technology education teachers, inadequate understanding by administrators and counselors concerning technology education, and inadequate understanding by general populace concerning technology education, were …