Engineering Education Commons^™

Library Steam Kits: Developing Circulatable Curriculum For Community Steam Learning, Daphne Fauber, Ashley Fletcher

Purdue Journal of Service-Learning and International Engagement

Public libraries serve as repositories for a movement described as cultivation of the Library of Things. In the wake of COVID-19, the West Lafayette Public Library enhanced its existing Library of Things collection through the creation of science, technology, engineering, art, and mathematics (STEAM) kits. Since 2017, the West Lafayette Public Library has held regular free STEAM programs for the community; those programs were put on hold during the height of the COVID-19 pandemic, which concurred with a library renovation. These kits provide the community with the ability to learn STEAM concepts at home engaging, hands-on activities that may otherwise …

Teaching To Develop Perspective, Skills, Confidence, And Identity As Problem-Solving Engineers, Russell Kirk Pirlo

Research and Reflection on Learning and Teaching in Higher Education

The “core” of an engineering degree program typically comprises the concepts, equations, and technical skills needed, as well as their practical application to common problems of the profession. This core is then divided into the “content” that must be covered in each course. It is widely recognized, however, that successful individuals do not thrive as professionals on content alone. Thus, there is significant and increasing emphasis across higher education to “educate the whole person.” These efforts aim to develop “deep” qualities like grit, critical thinking, perseverance, learning from failure, valuing diversity, teamwork, leadership, curiosity, recognizing opportunity, creating value, and acting …

Contextualizing And Integrating Practices: Reclaiming Authenticity Lost From Translating Workplace Engineering Practices Into K-12 Standards, Anne E. Leak, Lindsay M. Owens, Kelly Norris Martin, Benjamin M. Zwickl

Journal of Pre-College Engineering Education Research (J-PEER)

K-12 students need to become familiar with engineering because 21st-century careers integrate engineering practices across all science, technology, engineering, and mathematics (STEM) fields. While the Next Generation Science Standards (NGSS) emphasize learning real science and engineering practices, further work is needed to authenticate engineering for K-12 education. The NGSS are presented in a way that merges a single general practice with a core disciplinary idea and cross-cutting concept. Based on this framing and underlying epistemology, NGSS engineering practices are often implemented as overgeneralized, isolated, and largely context-neutral. Yet, in the STEM workplace, practices are rarely done in isolation from one …

Multiple Case Study Of Science And Engineering Integration In Secondary School Across Six School Districts, Elizabeth Hasseler, Elizabeth B. Lewis

Department of Teaching, Learning, and Teacher Education: Faculty Publications

A multiple case study was conducted to investigate six districts’ approaches to integrating science and engineering curricula in their secondary education programs. Data collected included classroom observations, interviews with teachers and administrators, college transcripts, professional development, and curriculum, as well as how, and how district personnel supported, and teachers enacted classroom instruction to align with the Next Generation Science Standards (NGSS). Six districts were chosen due to their ranges in their size, urban or rural context, and demographics. There were 25 participants in the study who were either district personnel or secondary teachers. All school districts in the study incorporated …

The Intersection Of Culturally Responsive Pedagogy And Engineering Design In Secondary Stem, Mariam Manuel, Jessica Gottlieb, Gina Svarovsky, Rebecca Hite

Journal of Pre-College Engineering Education Research (J-PEER)

The instructional practices of the engineering design process and culturally responsive pedagogy have each garnered national attention and multiple decades of research. Findings from the respective literature bases call for educators and policymakers to integrate these two pedagogical approaches into K-12 classroom instruction. Scholars have argued that this integration would improve student engagement and academic achievement. There is a significant amount of research that supports the positive student outcomes associated with each approach, yet there remains a dearth of literature that addresses the integration of these two practices into the science and mathematics content areas. The movement around educational reform …

Global Engineering Ethics: What? Why? How? And When?, Rockwell F. Clancy Iii, Qin Zhu

Journal of International Engineering Education

Even though engineering programs, accreditation bodies, and multinational corporations have become increasingly interested in introducing global dimensions into professional engineering practice, little work in the existing literature provides an overview of questions fundamental to global engineering ethics, such as what global engineering ethics is, why it should be taught, how it should be taught, and when it should be introduced. This paper describes the what, why, how, and when of global engineering ethics – a form adopted from a 1996 article by Charles Harris, Michael Davis, Michael Pritchard, and Michael Rabins, which has influenced the development of engineering ethics for …

Electronic Circuits And Machines, Sheila D. Hill Pe

KSU Distinguished Course Repository

This course covers the electrical characteristics of fundamental circuit components including resistors, capacitors and inductors in DC circuits, single-phase AC and three-phase AC circuits. Fundamental concepts of AC power and phasors are examined. The course also introduces the devices that generate and transform electrical power, as well as switching and protection of electrical circuits. Practical applications of motors, generators, transformers and operational amplifiers will be covered to provide non-electrical engineering majors a comprehensive understanding of electro-mechanical systems.

Complexity In The Classroom Workshop: Teaching And Learning The Cynefin Framework By Applying It To The Classroom, Jennifer Karlin, L. Eric James, Lauren Singlelmann

Integrated Engineering Department Publications

Complex adaptive systems are both an important fundamental principle in systems engineering education and a reality of all engineering education. The Cynefin framework, as created by Snowden and Boone (2007), is a decision-making tool that helps the engineer recognize the type of system within which they are operating and then respond in a manner that is appropriate for the cause-and-effect relationships associated with that system type. The types of system, or the domains, fall into five categories and their liminal spaces: obvious, where the cause-and-effect relationships are clear to everyone involved; complicated, where the cause-and-effect relationships are clear to those …

A Multi-Decade Response To The Call For Change, Bart Johnson, Ron Ulseth, Mike Raich

Integrated Engineering Department Publications

Engineering and society have always been intertwined, especially with the accepted realization of technology's significant and rapidly increasing influence on the evolution of society. As a profession, engineering has a vital role in sustainably meeting needs and exploring opportunities that are ever changing and evolving. As societal and industry needs have evolved, engineering education itself has raised the call several times for evolving the way engineers are educated; however, the recent history of engineering education is, overall, one of missed opportunities. This was brought to a headline recently as ASEE leadership authored an article entitled “Stuck in 1955, Engineering Education …

Byoe: Making Connections Between Fluid Mechanics And Abstract Painting, Thomas Shepard, Charles Mossey, Jacob Swanson, Colin Huntington, Mary Murphy

Integrated Engineering Department Publications

This bring your own experiment (BYOE) paper details two iterations of a hands-on painting project that has been well-received by fluid mechanics students. In the conception of this project the authors have explored many of the relevant parameters for different painting techniques: drip painting, pendulum painting spray painting, and acrylic pours – one subset of which is spinning pours. These methods were explored both in terms of relevant fluid mechanic phenomenon as well as with hands-on experimentation, reviewing instructional videos and talking with artists. These efforts led to creation of short instructional videos that students can watch before undertaking their …

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Defining The Hourglass Framework Of Technical And Musical Concepts In Music Technology Education With Two Case Studies In Course Development, Timothy Hsu

Journal of the Association for Technology in Music Instruction

As the field of music technology connects music with a vast array of technical fields, a mature music technology program ideally challenges and develops students that incorporate musical contexts of technical ideas and the technical concepts of musical ideas. The educational challenge of music technology programs lies in the balancing of technical and musical material in the curriculum. In structuring this balance, this paper proposes an hourglass framework, where music technology sits at the neck of two sides, where one side is built on the tradition of Western and non-Western music history, theory, and repertoire, and the other side is …

Design Of A Freight Transportation Outreach Curriculum, Breanna Stoesz

Civil Engineering Undergraduate Honors Theses

This project is centered around finding a solution to the shortage of truck drivers within the freight industry. Specifically, this project aims to lessen this shortage by ensuring potential future drivers are aware of the benefits of the industry and are encouraged to consider this career path for themselves. By producing an engaging and educational freight transportation curriculum for middle and high school students to go through in outreach programs, these students would have an increased likelihood of joining the trucking profession and encourage others to become informed about the profession as well. In addition to the direct driving role, …

Inventing The Baby Saver: An Activity Systems Analysis Of Applied Engineering At The High School Level, Jessica Gale

Journal of Pre-College Engineering Education Research (J-PEER)

Extant research and engineering education frameworks call for students to engage in personally meaningful engineering projects; however, there are few case studies documenting the work of young engineers working to design solutions to real-world problems that matter to them. This qualitative case study describes the work of a purposively selected group of high school engineering students (the InvenTeam) (n = 15) as they devote a school year to a particularly ambitious invention project: designing and prototyping a device to mitigate deaths occurring when children are left unattended in hot cars. Utilizing cultural historical activity theory as a theoretical and …

Secondary Science Teachers’ Curricular Use Of Ngss Engineering Practices, Elizabeth Hasseler, Amy Tankersley, Ana M. Rivero, Lyrica L. Lucas, Elizabeth B. Lewis

Department of Teaching, Learning, and Teacher Education: Faculty Publications

We investigated how often teachers integrated engineering into science lessons to address Next Generation Science Standards (NGSS) performance expectations using data from a multi-year study of secondary science teachers. Only 7.14% of middle school (MS) lessons contained engineering practices. Engineering was included in lessons for students to apply or support the learning of scientific content.

Presider: Amy Tankersley

Study Guide Generation In Chemical Engineering Thermodynamics: A Comparison Between Individual And Group Preparation, William Brown

Williams Honors College, Honors Research Projects

Thermodynamics is an essential course in the chemical engineering curriculum. Thermodynamics requires the use of many equations and rules that use subtle concepts from math, physics, and chemistry. To assist students with using these equations and recalling rules on exams, students are often permitted a “study guide” to use on the exams to help avoid rote memorization. Study guide construction is an environment in which students learn, and learning has been shown to improve when collaboration is involved. In this research, students will construct study guides individually for one exam, and in teams for one exam. Students will answer questions …

A Narrative Inquiry Into Veterans In Engineering, Miracle David Solley

Graduate Theses, Dissertations, and Problem Reports

Much research has been conducted on student veterans, in general; however, research on student veterans in engineering majors is very sparse. There is national recognition of the importance of student veterans in science, technology, engineering, and mathematics (STEM) fields as evidenced in the passage in 2020 of a bill investigating the lack of veteran students in these fields. This study adds to the literature by answering the following two research questions: What are the experiences of veteran engineering students? How has military service impacted those experiences? Twelve students and five professors from a Doctoral University: Very High Research Activity in …

Overview Of Standards For Technological And Engineering Literacy (Other), Philip Reed, Tyler Love, Scott Bartholomew, Kelly Dooley

STEMPS Faculty Publications

In 2020, the International Technology and Engineering Educators Association (ITEEA) published Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) [1]. These standards open with a clear rationale why all Pk-12 students should study technology and engineering:

Technology and engineering are pervasive in all aspects of our lives. Every human activity is dependent upon the products, systems, and processes created to help grow food, provide shelter, communicate, work, and recreate. As the world grows more complex, it is increasingly important for everyone to understand more about technology and engineering [1, p. 1].

The …

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Tinkering With Theoretical Objects: Designing Theories In Scientific Inquiry, Shakayla Moran, Leslie Atkins Elliott

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

The EDISIn Project (Engineering Design in Scientific Inquiry), taught in an undergraduate teacher preparation program, is investigating where engineering design opportunities emerge within contexts of scientific inquiry, with implications for how science teachers might productively engage in engineering design in their science courses without compromising on either the science or the engineering. In some inquiries, the opportunities for engineering were obvious, particularly with respect to novel experimental designs and in developing physical representations of models. In other inquiries, however, the investigations were either largely theoretical or the experimental designs were readily developed without a need for deliberate attention to design …

Senior Elective Communications Systems Courses As Pathways To Capstone Projects In Electrical Engineering Technology Program, Otilia Popescu, Murat Kuzlu

Engineering Technology Faculty Publications

In any engineering program the capstone project is the most comprehensive work completed by the students, and is regarded as the pinnacle of their engineering studies, with all their course work culminating with this major design, implementation and reporting product. Coming up with the actual topic of the project is sometimes the most difficult part of the project, especially in programs where the project topics are not solely proposed by the faculty, and they are for the student and advisor to develop together. This is especially the case of engineering technology programs, where a large percentage of students have work …

Expanding A Mechanical Engineering Technology Curriculum To Include Additive Manufacturing, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

Additive Manufacturing (AM) has become a game changer for the manufacturing industry. With growing implementation of AM in various industries, it is the responsibility of different levels of education to expose students to AM technologies and to integrate AM into their curriculum. It is well known that students who gain the skillsets of today’s industry have a better chance in getting a competitive job. In response to this need, a new senior level elective course on AM, has been developed for the first time in Old Dominion University (ODU) region in the South. The course was developed and taught by …

Development Of A Smart Grid Course In An Electrical Engineering Technology Program, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Electric power systems courses have been traditionally offered by electrical engineering technology programs for a long time, with the main objective to introduce students to the fundamental concepts in the field of electric power systems and electrical to mechanical energy conversion. A typical electric power systems course covers a variety of topics, such as general aspects of electric power system design, electric generators, components of transmission and distribution systems, power flow analysis, system operation, and performance measures. In the last decades, electric power systems have significantly modernized alongside with requirement of improvement in system efficiency, reliability, cybersecurity, and environmental sustainability. …

The Ingenuity Of Everyday Practice: A Framework For Justice-Centered Identity Work In Engineering In The Middle Grades, Angela M. Calabrese Barton, Kathleen Schenkel, Edna Tan

Journal of Pre-College Engineering Education Research (J-PEER)

Inequities in opportunities to learn and become in engineering, especially for minoritized youth, are enduring and systemic. How students experience engineering education, through curriculum, pedagogy, and teacher/student interactions, all shape opportunities for identity development. In this paper we draw upon cultural studies and critical ethnography to explore how and why students engage in engineering for sustainable communities and its relationship to their identity work. We ground our work in a justice-centered asset-based stance that centers how people’s lived lives and community wisdom yield powerful forms of cultural knowledge/practice relevant to learning and engaging in science, technology, engineering, and mathematics. We …

You Want Me To Teach Engineering? Impacts Of Recurring Experiences On K-12 Teachers’ Engineering Design Self-Efficacy, Familiarity With Engineering, And Confidence To Teach With Design-Based Learning Pedagogy, Shaunna Smith, Kimberly Talley, Araceli Ortiz, Vedaraman Sriraman

Journal of Pre-College Engineering Education Research (J-PEER)

This paper reports on findings from a group of ten teachers who were enrolled in a semester-long, graduate-level educational technology course that used design-based learning to explore the integration of making and the engineering design process into a variety of K-12 educational contexts. Using convergent mixed methods, this study examines how the course impacted teachers’ familiarity and confidence in teaching the engineering design process, as viewed through their pre- and post-semester engineering design self-efficacy scores and their weekly reflective journal entries. These measures are important factors for developing teacher experience and confidence in integrating engineering and design-based learning strategies within …

Small Gas Engines Interactive Notebook, P. Troy White

STEM & Agricultural Education Curriculum Resources

A Small Gas Engines interactive notebook to help prepare students for the Briggs & Stratton Master Service Technician Exam 1.

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …