Engineering Commons^™

The Development Of Cesium Calcium Bromo-Iodide Scintillator For X-Ray And Gamma Ray Detection, Matthew Starr Loyd

Masters Theses

CsCaI₃:Eu [cesium calcium iodide doped with europium] is a promising scintillator material that can be grown from the melt, but undergoes a tetragonal to orthorhombic phase transition upon cooling at 255 °C [degrees Celsius], causing twinning and cloudiness. The purpose of this work is to suppress this solid to solid phase transition in the CsCaI₃:Eu scintillator, which has a light yield of ~40000 ph/Mev and energy resolution at 662keV of ~4%, by halide replacement to form the compound CsCaBr_xI_3-x:Eu [cesium calcium bromo-iodide doped with europium]. Crystals 8 cm³ [cubic centimeters] in …

Design Considerations For Paralleling Multiple Chips In Sic Power Modules, Fei Yang

Masters Theses

With the benefits of fast switching speed, low on-resistance and high thermal conductivity, silicon carbide (SiC) devices are being implemented in converter designs with high efficiency and high power density. Consequently, SiC power modules are needed. However, some of the preestablished package designs for silicon based power modules are not suitable to manifest the advantages of SiC devices. Therefore, this thesis aims at optimizing the package design to utilize the fast switching capability of SiC devices.

First, the power loop parasitic inductance induced by the package can lead to large voltage spikes with the fast switching SiC device. It can …

Sound-Proof, Fire Resistant, Leak-Free And Super-Insulated Hvac Ducts, James Fitzsimmons Ii, Ahmed Alyousef, Kyle Dirksen, Nathan Ware, William Miller

Chancellor’s Honors Program Projects

No abstract provided.

Design And Evaluation Of A Sub-1-Volt Read Flash Memory In A Standard 130 Nanometer Cmos Process, David Andrew Basford

Masters Theses

Nonvolatile memory design is a discipline that employs digital and analog circuit design techniques and requires knowledge of semiconductor physics and quantum mechanics. Methods for programming and erasing memory are discussed here, and simulation models are provided for Impact Hot Electron Injection (IHEI), Fowler-Nordheim (FN) tunneling, and direct tunneling. Extensive testing of analog memory cells was used to derive a set of equations that describe the oating-gate characteristics. Measurements of charge retention also revealed several leakage mechanisms, and methods for mitigating leakage are presented.

Fabrication of ash memory in a standard CMOS process presents significant design challenges. The absence of …

Development Of A Multi-Jointed Wing Surface Mover, Collin Arthur Strassburger

Masters Theses

The field of ornithopter research has reached a point where it has become commonplace for Computational Fluid Dynamics (CFD) solvers to have built-in capabilities for rigid solid body motion. This is suitable for micro air vehicles (MAVs) yet is often not exible enough to model wings with dynamic internal structure, such as the wings of birds and bats. There is currently no program available to perform the surface motion of a wing which has multiple independently moving joints. The code, detailed in this paper, provides the user with this type of capability. The bone lengths, joint angle properties, and thickening …

Solar System Battery Backups For Reactor Coolant Pumps During Electricity Outages Resulting From Natural Disasters, Md. Shamsul Huda Sohel

International Journal of Nuclear Security

In a nuclear power plant, its coolant system is major safety equipment. Coolant system failure causes several accidents in nuclear history. There are so many causes for coolant system failure. One of them is lack of electric power for coolant pumps. In typically NPP there is backup system for power redundancy. In this article, focus on reactor coolant system and its backup power when main grid lines failure. Here discuss about solar backup power for batteries and increases a safety lines for reactor coolant pumps. So, our main goal is providing a battery backup from reliable natural source and ensuring …

Sensitivity Analysis For Best-Estimate Thermal Models Of Vertical Dry Cask Storage Systems, Remy R. Devoe, Kevin R. Robb, Steven Skutnik

Faculty Publications and Other Works -- Nuclear Engineering

Loading requirements for dry cask storage of spent nuclear fuel are driven primarily by decay heat capacity limitations, which themselves are determined through recommended limits on peak cladding temperature within the cask. This study examines the relative sensitivity of peak material temperatures within the cask to parameters that influence both the stored fuel residual decay heat as well as heat removal mechanisms. These parameters include the detailed reactor operating history parameters (e.g., soluble boron concentrations and the presence of burnable poisons) as well as factors that influence heat removal, including non-dominant processes (such as conduction from the fuel basket to …

Improvements To The Predictive Capability Of Fcm Fuel Performance Modeling, Daniel Philip Schappel

Doctoral Dissertations

A proposed fuel type for improved accident performance in LWRs (Light Water Reactors) involves TRISO (Tristructural-Isotropic) particles embedded in a NITE (Nano Infiltrated Eutectic) silicon carbide matrix. TRISO fuel particles contain a spherical fuel kernel of about 500 to in excess of 800 microns in diameter. The kernel and buffer layer are then coated with three isotropic layers consisting of a dense inner pyrolytic carbon (IPyC), a silicon carbide (SiC) layer, and an outer pyrolytic carbon (OPyC) layer. These layers are about 40 microns thick. The TRISO particle packing fraction in the NITE-SiC matrix is expected to be about 40 …

Intrusion Detection Of A Simulated Scada System Using A Data-Driven Modeling Approach, Brien Alen Jeffries

Doctoral Dissertations

Supervisory Control and Data Acquisition (SCADA) are large, geographically distributed systems that regulate help processes in industries such as nuclear power, transportation or manufacturing. SCADA is a combination of physical, sensing, and communications equipment that is used for monitoring, control and telemetry acquisition actions. Because SCADA often control the distribution of vital resources such as electricity and water, there is a need to protect these cyber-physical systems from those with possible malicious intent. To this end, an Intrusion Detection System (IDS) is utilized to monitor telemetry sources in order to detect unwanted activities and maintain overall system integrity.

This dissertation …

Crafting Nanostructured Neural Interfaces With Hydrogel Particles, Emily Ann Morin

Doctoral Dissertations

Central nervous system neural device functionality hinges on effective communication with surrounding neurons. This depends on both the permissiveness of the device material to promote neuron integration and the ability of the device to avoid a chronic inflammatory response. Here, a facile approach has been developed exploring the multiple functionalities of hydrogel particles to provide cues to impart neural integration for such materials. Three distinct, yet interconnected tasks were undertaken: investigating hydrogel particle-modified substrate neuron integration and central nervous system inflammatory response, investigating guided hydrogel particle adsorption, and investigating hydrogel particles as local reservoirs for counteracting adverse effects from oxidative …

Physical Information Incorporated Clustering Techniques And Their Applications In Transportation Information System, Yang Zhang

Doctoral Dissertations

Massive data from different sources are becoming available in transportation field, and spurring new research on utilizing these data to nurture new intelligent transportation information systems. Clustering algorithms are among the methods that are being applied to the domain but facing challenges. Classical clustering algorithms work fine with \point" based data, which are homogeneous and have no extra constraints. Data in transportation are sometimes involved with specific geometric shapes, have underlying constraints, and can be heterogeneous. There has been no clustering algorithm dedicated to these situations.

In this dissertation, we re-examine the mathematical foundation and underlying philosophy of hierarchical, density …

Flight Risk Management And Crew Reserve Optimization, Ying Zhang

Doctoral Dissertations

There are two key concerns in the development process of aviation. One is safety, and the other is cost. An airline running with high safety and low cost must be the most competitive one in the market. This work investigates two research efforts respectively relevant to these two concerns.

When building support of a real time Flight Risk Assessment and Mitigation System (FRAMS), a sequential multi-stage approach is developed. The whole risk management process is considered in order to improve the safety of each flight by integrating AHP and FTA technique to describe the framework of all levels of risks …

Fundamental Study And Development Of Tuned Active Flow Control Actuators, Brian A. Binkley

Doctoral Dissertations

A novel, multi-level, flow-control actuator was developed using piezoceramic materials. Several actuators were fabricated in various shapes and sizes to produce a variety of effects for flow control applications. The actuators were studied in a quiescent-air bench test to understand the vibrations produced by various actuator shapes. The actuator flow-control effect was studied experimentally with flat-plate and cavity configurations, and was studied numerically using moving boundary conditions and dynamic meshing. The disturbances produced by the actuator couple with the cavity flow field producing increased cavity tones, increased vorticity, and sustainment of large-scale vorticity downstream of the cavity. The combined actuation …

Development And Implementation Of A Forward Solution Hip Mathematical Model To Determine In Vivo Mechanics And Predict Hip Separation, Michael Thomas Lacour

Doctoral Dissertations

Osteoarthritis, signified by excessive wear of joint cartilage, is most common in hip, knee, and spinal joints [1]. Current treatment for extreme osteoarthritis is total joint arthroplasty, where the damaged bone and cartilage are removed and replaced by artificial bone representations separated by artificial cartilage representations. While this treatment does generally improve patient quality of life, current joint replacement systems unfortunately still yield atypically high forces, premature component wear, and abnormal kinematics compared to native joints [2] [3] [4] [5].

For total hip arthroplasty, one common complication is in vivo separation and dislocation of the femoral head within the acetabular …

Learning Multimodal Structures In Computer Vision, Ali Taalimi

Doctoral Dissertations

A phenomenon or event can be received from various kinds of detectors or under different conditions. Each such acquisition framework is a modality of the phenomenon. Due to the relation between the modalities of multimodal phenomena, a single modality cannot fully describe the event of interest. Since several modalities report on the same event introduces new challenges comparing to the case of exploiting each modality separately.

We are interested in designing new algorithmic tools to apply sensor fusion techniques in the particular signal representation of sparse coding which is a favorite methodology in signal processing, machine learning and statistics to …

Correlating Long-Term Lithium Ion Battery Performance With Solid Electrolyte Interphase (Sei) Layer Properties, Seong Jin An

Doctoral Dissertations

This study was conducted to understand effects of some of key factors (i.e., anode surface properties, formation cycling conditions, and electrolyte conditions) on solid electrolyte interphase (SEI) formation in lithium ion batteries (LIBs) and the battery cycle life. The SEI layer passivates electrode surfaces and prevents electron transfer and electrolyte diffusion through it while allowing lithium ion diffusion, which is essential for stable reversible capacities. It also influences initial capacity loss, self-discharge, cycle life, rate capability and safety. Thus, SEI layer formation and electrochemical stability are primary topics in LIB development. This research involves experiments and discussions on key factors …

First-Principles Study Of Point Defect Behavior At Interfaces And In-Plane Strain Fields, Jianqi Xi

Doctoral Dissertations

Interfaces in solid materials are the so-called boundaries, separating crystals with the same structure and chemistry but different orientations, e.g. grain boundaries (GBs), different stacking sequences, e.g. stacking faults (SFs), or crystals with different structures and/or chemistries as well as orientations, e.g. the interface between substrate and thin film. In this study, first-principles calculations are used to investigate the defect behavior at different interfaces and in-plane strain fields, such as stacking fault (SF) in silicon carbide (SiC), in-plane strain field near interfaces in potassium tantalate (KTaO₃), and grain boundary in ceria (CeO₂).

Results show that the …

Design And Implementation Of A Low‐Power Wireless Respiration Monitoring Sensor, Ifana Mahbub

Doctoral Dissertations

Wireless devices for monitoring of respiration activities can play a major role in advancing modern home-based health care applications. Existing methods for respiration monitoring require special algorithms and high precision filters to eliminate noise and other motion artifacts. These necessitate additional power consuming circuitry for further signal conditioning. This dissertation is particularly focused on a novel approach of respiration monitoring based on a PVDF-based pyroelectric transducer. Low-power, low-noise, and fully integrated charge amplifiers are designed to serve as the front-end amplifier of the sensor to efficiently convert the charge generated by the transducer into a proportional voltage signal. To transmit …

An Optimization Framework For Integrating Variable Capacity And Pavement Thickness Requirements In Highway Cost Allocation, Saurav Kumar Dubey

Doctoral Dissertations

The objective of Highway Cost Allocation (HCA) is to distribute or allocate in a fair and rational manner the cost of a transportation facility (either a highway or bridge) among all vehicle classes using it. The purpose of this dissertation is to study and enhance a model, known as the least-core model, to include both pavement thickness and traffic capacity requirements for all coalitions formed with a given group of vehicle classes. Considering vehicle classes as players and groups of vehicle classes as coalitions, it is possible to quantify the thickness and width of pavement needed to accommodate the vehicle …

Evaluation Of Increased Targeted Enforcement And Community-Based Outreach And Education Programs To Increase Nighttime Seatbelt Use In East Tennessee, Kwaku Frimpong Boakye

Doctoral Dissertations

According to the National Highway Traffic Safety Administration (NHTSA), motor vehicle crashes are the leading cause of death among people aged 1-54 in the United Sates. In 2015, the number of motor-vehicle deaths on U.S. roadways totaled 35,092, a 7% increase from 2014 (32,744). Though lower gas prices and increased vehicle mileage combined with risky driving behaviors (e.g. speeding, driving while texting) account for the increased fatality rate, seatbelt non-use has been a significant contributory factor. It is estimated that nearly half (48%) of passenger vehicle occupants involved in fatal crashes each year are unrestrained.

In a recent 2014 report …

Integrating Disparate Nuclear Data Sources For Improved Predictive Maintenance Modeling: Maintenance-Based Prognostics For Long-Term Equipment Operation, Zachary Allen Welz

Doctoral Dissertations

The United States (US) nuclear industry is one of the most heavily regulated businesses in the world, creating a culture of world-class design, operation, and maintenance. In an article published on modern maintenance technologies, Terrence OHanlon (past Chief Asset Manager for Reliabilityweb.com) stated, “world class companies often devote up to 50 percent of their entire maintenance resources to condition based monitoring and the planned work that is required as a result of the findings” [1]. One would expect US nuclear power plants to constantly upgrade, improve, and expand their operations and maintenance departments and tactics. Since the early 1990s, US …

Modeling And Spice Implementation Of Silicon-On-Insulator (Soi) Four Gate (G4fet) Transistor, Md Sakib Hasan

Doctoral Dissertations

As the device dimensions have reduced from micrometer to nanometer range, new bulk silicon devices are now facing many undesirable effects of scaling leading device engineers to look for new process technologies. Silicon-on-insulator (SOI) has emerged as a very promising candidate for resolving the major problems plaguing the bulk silicon technology. G⁴FET [G4FET] is a SOI transistor with four independent gates. Although G⁴FET has already shown great potential in different applications, the widespread adoption of a technology in circuit design is heavily dependent upon good SPICE (Simulation Program with Integrated Circuit Emphasis) models. CAD …

Natural Ventilation Models And Production Management In An Experimental High Tunnel, Muzi Zheng

Doctoral Dissertations

High tunnels (HTs) help producers to be more profitable through crop protection and extension of growing season. Proper ventilation and heat managements inside HTs are crucial for adjusting inner microclimates and future obtaining marketable crop production. This study first analyzed daytime ventilation rates that responds to the changes of external weather conditions in a Gothic-type HT located in eastern Tennessee. A mathematical energy balance model and instrumental measurement serve as validation data were developed with a good agreement for ventilation rates (R²>0.70). The coupling of energy balance model and air-flux calculation based on external weather parameters can be …

A Model For Sustaining New Technology Based On Government Incentives, Girish Upreti

Doctoral Dissertations

The diffusion of new technology that provides environmental benefits may require government incentives for a duration of time, especially when the technology is expensive. The Center of Systems Research and Education (CASRE) model is developed that analyzes the impact of incentives in sustaining new technologies to allow their social acceptance. The CASRE model includes both demand and supply variables associated with incentive policy to sustain new technology. The key to market dissemination and sustainability is the Investment Tax Credit (ITC) levels provided by the government. The level of ITC is based on the current cost to the customer and the …

Model For Prioritization Of High Variation Elements In Discrete Production Systems, Bharadwaj Venkatesan

Doctoral Dissertations

The complexity of the modern manufacturing enterprise has led companies to look for techniques and methodologies for improving production performance. Lean manufacturing techniques have been applied in the US with varying degrees of success, and Theory of Constraints (TOC) has been used to emphasize the flow of production and identify performance improvement projects. One aspect of manufacturing for which there has been limited academic or industrial research till date is the impact of variation on production performance and the identification of improvement projects based on variation. This thesis develops a methodology to incorporate random and simultaneous occurrence of variability in …

Study On Agricultural Tractor Operator Safety In Rollover Accidents, Farzaneh Khorsandi Kouhanestani

Doctoral Dissertations

Agriculture is one of the most dangerous industries in the US. Tractor accidents are the major cause of death in agriculture, producing about one half of the fatal accidents. Tractor overturn is the most common cause of death in tractor accidents. Three projects related to tractor operator safety in rollover accident were defined.

The aim of first project is to develop a Finite Element (FE) model to predict the Roll-Over Protective Structure (ROPS) performance under the standard SAE J2194 (SAE, 2009) static test. The developed model was validated by comparing the model results with experimental test results. The developed model …

Modeling The Consumer Acceptance Of Retail Service Robots, So Young Song

Doctoral Dissertations

This study uses the Computers Are Social Actors (CASA) and domestication theories as the underlying framework of an acceptance model of retail service robots (RSRs). The model illustrates the relationships among facilitators, attitudes toward Human-Robot Interaction (HRI), anxiety toward robots, anticipated service quality, and the acceptance of RSRs. Specifically, the researcher investigates the extent to which the facilitators of usefulness, social capability, the appearance of RSRs, and the attitudes toward HRI affect acceptance and increase the anticipation of service quality. The researcher also tests the inhibiting role of pre-existing anxiety toward robots on the relationship between these facilitators and attitudes …

Value Of Flow Measurement Accuracy In Hydropower Plants With Short Converging Intakes, Mark Herbert Christian

Doctoral Dissertations

This report documents research undertaken to determine the value of flow measurement accuracy in hydropower plants with short converging intakes. The motivation was to provide a suite of tools and best practices to streamline flow measurement sensor modeling in any type of hydropower plant. The Lower Granite Lock and Dam hydroplant was leveraged in development of the analysis tool. Computational fluid dynamics (CFD) models of Lower Granite Unit 4 provided necessary information about the hydraulic structures distribution through the unit. Two different CFD models were created. The first was done using the as-built plans; the second was created through modifications …

Sustainability Analysis For New Technologies Of Biofuels And Additive Manufacturing, Nelson A. Granda Marulanda

Doctoral Dissertations

This work is a compendium of different sustainability analysis on new technologies. The first chapter performed a Life Cycle Analysis of a biofuel process where pine woodchips are used to create SynGas. The study was done using a 10 tons gasifier, the mass balance of the reaction and an input/output analysis. All the data obtained was input into a freeware LCA software and the results were compared to the use of regular produced natural gas. The second chapter creates a benchmark of energy intensity and presents a case using binder jetting technology. Different Additive Manufacturing technologies energy intensity was reported, …

Laboratory Investigation And Discrete Element Analysis In Open-Graded Friction Course And Railway Crosstie-Ballast Interaction, Weimin Song

Doctoral Dissertations

Granular materials, such as ballast and aggregate, are widely used nowadays in civil and transportation engineering. Discrete element method has been extensively used to simulate the behavior of granular materials. In this study, properties of granular materials used in pavement and railway were investigated by laboratory tests and discrete element modeling.

Firstly, the bonding performance between pavement layers was evaluated. Open-graded friction course pavement and traditional dense asphalt mixture pavement were both explored. Two dense asphalt mixtures (D, BM) and one open-graded friction course (OGFC) mixture were selected for the comparison. The laboratory test results show that, for traditional dense …