Engineering Commons^™

The Future Of Nuclear Security: A Medical Physicist’S Perspective, Katharine E. Thomson

International Journal of Nuclear Security

Planning for the future of nuclear security is a vital and complex task, requiring cooperation and contribution from many disciplines and industries. This diversity of expertise should include the medical sector, which faces many of the same challenges as the nuclear industry: controlling access to dangerous material, creating a strong security culture, cooperating with the wider world and engaging the public.

Medical physicists, of which the author is one, oversee all aspects of small-scale radiation use. This paper discusses three key areas increasingly important to both medical and nuclear uses of radioactive materials: public engagement, prevention of nuclear and radiological …

Assessing And Enhancing Nuclear Safety And Security Culture For Small Facilities That Handle Radioactive Material, Solymosi Máté

International Journal of Nuclear Security

The use of radioactive sources is expanding all over the world and abreast the necessity of the enhancement of its safe and secure application is increasing too. In the nuclear industry, the safety and security are top priorities since decades. They share the same goal, to protect humans from the negative affect of the ionizing radiation. The human component of them is a significant factor and technical solutions can protect us so far and thus the culture for safety and security become a major focus. On the other hand, there are still some contradiction between recommendations and international guidance of …

The Future Of Nuclear Security In Moroccan Territory After The Creation Of The New Moroccan Agency Of Nuclear And Radiological Safety And Security: Opportunities And Challenges, Amal Touarsi, Amina Kharchaf

International Journal of Nuclear Security

Nowadays, a security regime for protecting nuclear and radiological material—providing an intelligent national regulatory institution and establishing national security laws—is necessary in order for a state to ensure security of nuclear and radiological materials used within its borders.

This paper focuses on discussing the opportunities and challenges facing the future of nuclear security after the creation of the new Moroccan Agency of Nuclear and Radiological Safety and Security.

Determination Of Critical Experiment Correlations Via The Monte Carlo Sampling Technique, William Jay Marshall

Doctoral Dissertations

Critical benchmark experiments are the foundation of validation of the computational codes used in criticality safety analyses because they provide a basis for comparison between the calculated results and the physical world. These experiments are often performed in series varying a limited number of parameters to isolate the effect of the independent parameter. The use of common materials, geometries, machines, procedures, detectors, or other shared features can create correlations among the resulting experiments. Most validation techniques used in criticality safety practice do not treat these correlations explicitly, and the effect of this is unclear as the correlations themselves are not …

Double Differential Neutron Yields Produced By Proton, Helium, And Iron Interactions In Thick Aluminum Targets, Natalie Ann Mcgirl

Doctoral Dissertations

Recent calculations of galactic cosmic ray (GCR) transport in enclosed, shielded space environments indicate that a minimum dose equivalent is achieved with aluminum shielding thicknesses near 20 g/cm² [grams per centimeter squared]. Increases in the absorbed dose and dose equivalent with shielding thicknesses above 20 g/cm² are believed to be caused by the production of light ions and neutrons in the thick shielding. However, uncertainties surround these calculations due to limited cross section and yield data for high-energy projectiles incident on thick targets. Thick-target neutron yields are particularly valuable measurements since they are produced over a wide range …

Novel Fission Track Detection For Identification And Characterization Of Special Nuclear Materials, Jonathan Allen Gill

Doctoral Dissertations

Fission track detection and analysis is used primarily in nuclear safeguards to identify special nuclear material. Identification of isotopic ratios is a crucial step in understanding the intended use of nuclear material and the nature of the materials production cycle. Unfortunately, this methodology uses etchable track detectors that require significant expertise and intensive labor to process.

This study developed a novel method using lithium fluoride (LiF) as a fluorescing nuclear track detector to conduct fission track analysis for isotopic prediction of uranium enrichment. Individual latent tracks produced by fission products were observed in LiF for the first time. These tracks …

Nestle To Origami Coupling: A Nuclear Non-Proliferation Tool For Lwr Fuel Assembly Isotope Analysis, Margaret Alva Kurtts

Doctoral Dissertations

NESTLE to ORIGAMI coupling is a versatile nuclear modeling tool that allows researchers to directly observe the impact of operator induced changes on LWR assembly isotope production. The paper presents an experimental method by which to test the ability of an operator to manipulate the core neutron spectrum in order to produce higher quality plutonium for weapons use. The paper presents two plutonium production scenarios and evaluates their feasibility based on potential for detection and production capacity. Reactor modeling of a VVER-1000 uses NESTLE core simulation software. NESTLE outputs burnup and relative power information for all nodes in the core. …

Determining 235u Enrichment Using A Dual-Energy Approach For Delayed Neutron Measurements, Angela Lynn Lousteau

Doctoral Dissertations

Bulk uranium items are often measured using active neutron interrogation systems to take advantage of the relatively high penetrability of neutrons, providing the ability to quickly and accurately measure uranium masses in large, dense configurations. Active techniques employ an external neutron source to induce fission in the uranium and subsequently measure emitted prompt fission or delayed neutrons. Unfortunately, the emitted neutrons from ²³⁵U [uranium-235] and ²³⁸U [uranium-238] are, for all practical purposes, indistinguishable; therefore, commonly used systems such as the Active Well Coincidence Counter, the ²⁵²Cf [californium-252] Shuffler, and other systems based on measurement of prompt or …

Methodology For An Advanced Risk Assessment Of Crud Induced Power Shift Using Coupled Multi-Physics Simulations And A Monte Carlo Scenario Analysis Of The Potential Financial Benefits, Travis Louis Lange

Doctoral Dissertations

Beginning in the 1970's, power uprates in nuclear power plants began to cause an operational problem called Crud Induced Power Shift (CIPS). Over decades, a method has been developed and refined that has allowed industry to effectively avoid CIPS. However, increasingly challenging economic environments have caused power plants to utilize more aggressive core designs. The problem of CIPS still looms over many reactors as a potential hazard requiring conservative measures. CIPS is due to complex physical and chemical interactions. Current industry methods use multiple single-physics simulations in their analyses. However, improved 3D multi-physics models of CIPS can provide a better …

Modeling Of Dislocation Channel Formation And Evolution In Irradiated Metals, Peter James Doyle

Masters Theses

Defect-free dislocation channel formation has been reported to promote plastic instability during tensile testing via localized plastic flow, leading to a distinct loss of ductility and strain hardening in many low-temperature irradiated materials. In order to study the underlying mechanisms governing dislocation channel width and formation, the channel formation process is modeled via a simple stochastic dislocation-jog process dependent upon grain size, defect cluster density, and defect size. Dislocations traverse a field of defect clusters and jog stochastically upon defect interaction, forming channels of low defect-density. Based upon prior molecular dynamics (MD) simulations and in-situ experimental transmission electron microscopy (TEM) …

Positron Emission Particle Tracking Software Maturation Project, Eric Michael Moore

Masters Theses

Positron Emission Particle Tracking (PEPT) software at the University of Tennessee (MultiPEPT) has demonstrated promising performance in multiple measurement domains. In order to contribute to its further development, a full codebase audit and three focused performance assessments were undertaken. Several improvements were made to the codebase as a result of the audit. The assessments demonstrated a linear axial detector- MultiPEPT response, the effect of mesh size variation, and the effect of temporal overlap variation. A number of best practices are compiled for effective use of MultiPEPT.

Improvements To Nestle: Cross Section Interpolation And N-Group Extension, William Matthews Kirkland

Masters Theses

The NESTLE program is a few-group neutron diffusion reactor core simulator code utilizing the nodal expansion method (NEM). This thesis presents two improvements made to NESTLE regarding cross-section interpolation and multigroup capability.

To quickly and accurately obtain cross sections from lattice physics input data, a new cross section interpolation routine was developed utilizing multidimensional radial basis function interpolation, also known as thin plate spline interpolation. Testing showed that, for existing NESTLE lattice physics input, accuracy was retained but not improved and processing time was longer. However, the new interpolation routine was shown allow much greater exibility in the case matrix …

The Development Of Cesium Calcium Bromo-Iodide Scintillator For X-Ray And Gamma Ray Detection, Matthew Starr Loyd

Masters Theses

CsCaI₃:Eu [cesium calcium iodide doped with europium] is a promising scintillator material that can be grown from the melt, but undergoes a tetragonal to orthorhombic phase transition upon cooling at 255 °C [degrees Celsius], causing twinning and cloudiness. The purpose of this work is to suppress this solid to solid phase transition in the CsCaI₃:Eu scintillator, which has a light yield of ~40000 ph/Mev and energy resolution at 662keV of ~4%, by halide replacement to form the compound CsCaBr_xI_3-x:Eu [cesium calcium bromo-iodide doped with europium]. Crystals 8 cm³ [cubic centimeters] in …

Solar System Battery Backups For Reactor Coolant Pumps During Electricity Outages Resulting From Natural Disasters, Md. Shamsul Huda Sohel

International Journal of Nuclear Security

In a nuclear power plant, its coolant system is major safety equipment. Coolant system failure causes several accidents in nuclear history. There are so many causes for coolant system failure. One of them is lack of electric power for coolant pumps. In typically NPP there is backup system for power redundancy. In this article, focus on reactor coolant system and its backup power when main grid lines failure. Here discuss about solar backup power for batteries and increases a safety lines for reactor coolant pumps. So, our main goal is providing a battery backup from reliable natural source and ensuring …

Sensitivity Analysis For Best-Estimate Thermal Models Of Vertical Dry Cask Storage Systems, Remy R. Devoe, Kevin R. Robb, Steven Skutnik

Faculty Publications and Other Works -- Nuclear Engineering

Loading requirements for dry cask storage of spent nuclear fuel are driven primarily by decay heat capacity limitations, which themselves are determined through recommended limits on peak cladding temperature within the cask. This study examines the relative sensitivity of peak material temperatures within the cask to parameters that influence both the stored fuel residual decay heat as well as heat removal mechanisms. These parameters include the detailed reactor operating history parameters (e.g., soluble boron concentrations and the presence of burnable poisons) as well as factors that influence heat removal, including non-dominant processes (such as conduction from the fuel basket to …

Improvements To The Predictive Capability Of Fcm Fuel Performance Modeling, Daniel Philip Schappel

Doctoral Dissertations

A proposed fuel type for improved accident performance in LWRs (Light Water Reactors) involves TRISO (Tristructural-Isotropic) particles embedded in a NITE (Nano Infiltrated Eutectic) silicon carbide matrix. TRISO fuel particles contain a spherical fuel kernel of about 500 to in excess of 800 microns in diameter. The kernel and buffer layer are then coated with three isotropic layers consisting of a dense inner pyrolytic carbon (IPyC), a silicon carbide (SiC) layer, and an outer pyrolytic carbon (OPyC) layer. These layers are about 40 microns thick. The TRISO particle packing fraction in the NITE-SiC matrix is expected to be about 40 …

Intrusion Detection Of A Simulated Scada System Using A Data-Driven Modeling Approach, Brien Alen Jeffries

Doctoral Dissertations

Supervisory Control and Data Acquisition (SCADA) are large, geographically distributed systems that regulate help processes in industries such as nuclear power, transportation or manufacturing. SCADA is a combination of physical, sensing, and communications equipment that is used for monitoring, control and telemetry acquisition actions. Because SCADA often control the distribution of vital resources such as electricity and water, there is a need to protect these cyber-physical systems from those with possible malicious intent. To this end, an Intrusion Detection System (IDS) is utilized to monitor telemetry sources in order to detect unwanted activities and maintain overall system integrity.

This dissertation …

Integrating Disparate Nuclear Data Sources For Improved Predictive Maintenance Modeling: Maintenance-Based Prognostics For Long-Term Equipment Operation, Zachary Allen Welz

Doctoral Dissertations

The United States (US) nuclear industry is one of the most heavily regulated businesses in the world, creating a culture of world-class design, operation, and maintenance. In an article published on modern maintenance technologies, Terrence OHanlon (past Chief Asset Manager for Reliabilityweb.com) stated, “world class companies often devote up to 50 percent of their entire maintenance resources to condition based monitoring and the planned work that is required as a result of the findings” [1]. One would expect US nuclear power plants to constantly upgrade, improve, and expand their operations and maintenance departments and tactics. Since the early 1990s, US …

Identification Of Key Drivers For Municipal Utility Performance, Jasmin Alsaied

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

This report explores the various performance indicators for municipal electric utilities and the greatest impact financial investments can make for improving these indicators. A literature search provided key detail about performing an analysis that would prove useful to utilities. The analysis identifies key performance indicators that allowed for the most prudent of investments. Data mining techniques and statistical analyses were performed on data sets concerning the 51 North Carolina municipal electric utilities to identify several key ratios and performance indicators that have the greatest impact on cost of service, system reliability, and customer satisfaction. Statistical analyses were used to determine …

Non-Destructive Assay Of Uranium Enrichment Facilities, Kathryn E. Bales, Weston Bogart, Tyler Camarena, Sarah Creasman, Eric W. Nelius

Chancellor’s Honors Program Projects

No abstract provided.

Thermodynamic Characterization And Isothermal Separability Of Heavy Fission Product Chelates For Post-Detonation Nuclear Forensic Analysis, Steven Adam Stratz

Doctoral Dissertations

Nuclear terrorism, one of the most critical threats to national security, exhibits complexities that do not exist with similar threats from sanctioned state actors. Responding to a domestic nuclear terrorism strike is difficult when the original source of the weapon may be unknown, given that terrorist organizations (at the time of writing) do not themselves have nuclear technology sufficient to design and build nuclear weapons. Consequently, the development of forensic techniques to help source and characterize nuclear weapons after detonation has recently become an area of interest. This relatively new field of science, known as post-detonation nuclear forensics, aims to …

Sensitivity Of Vver-1000 Spent Fuel Pin Nuclide Inventory To Operational Parameters, Nicholas Patrick Luciano

Doctoral Dissertations

Tools that can rapidly compute the isotopic composition of spent nuclear fuel (SNF) are useful for many reasons, including safety and security. Although tools exist to compute approximate isotopic compositions, detailed fuel composition requires reactor simulation that result from normal and off-normal operations. Reactor simulation is typically performed using nodal core simulators. These codes perform their calculations rapidly, but they may not compute isotopic composition.

The Russian designed VVER is a pressurized water reactor that uses hexagonal fuel assemblies with triangularly pitched fuel rods and annular pellets. The international expansion of VVER-1000 reactor technology has motivated a renewed interest in …

Improved Sample Utilization In Thermal Ionization Mass Spectrometry Isotope Ratio Measurements: Refined Development Of Porous Ion Emitters For Nuclear Forensic Applications, Matthew Louis Baruzzini

Doctoral Dissertations

The precise and accurate determination of isotopic composition in nuclear forensic samples is vital for assessing origin, intended use and process history. Thermal ionization mass spectrometry (TIMS) is widely accepted as the gold standard for high performance isotopic measurements and has long served as the workhorse in the isotopic ratio determination of nuclear materials. Nuclear forensic and safeguard specialists have relied heavily on such methods for both routine and atypical efforts. Despite widespread use, TIMS methods for the assay of actinide systems continue to be hindered by poor ionization efficiency, often less than tenths of a percent; the majority of …

An Optimization Method For Matched Abundance-Ratio Cascades By Varying The Key Weight, Richard Dale Harvey

Doctoral Dissertations

The theory of multicomponent isotope separation in matched abundance-ratio cascades (MARC) has been well established by Cohen, de la Garza, von Halle, and others. Because separation factors of different isotopes vary in the same separator, isotopic weight fractions cannot be matched in the same sense as in a two-component ideal system. Therefore, the abundance ratios of the desired isotope and a selected key isotope are matched, hence the name. These ratios are matched by choosing a key weight between the two selected components of separation.

Desirable stable isotopes for separation can exist as minor components of a natural, multicomponent isotope …

Computational Thermal-Hydraulics Modeling Of Twisted Tape Enabled High Heat Flux Components, Emily Buckman Clark

Doctoral Dissertations

The goal of this work was to perform a computational investigation into the thermalhydraulic performance of water-cooled, twisted tape enabled high heat flux components at fusion relevant conditions. Fusion energy is a promising option for future clean energy generation, but the community must overcome significant scientific and engineering challenges before meeting the goal of electricity generation. One such challenge is the high heat flux thermal management of components in fusion and plasma physics experiments. Plasma facing components in the magnetic confinement devices, such as ITER or W7-X, will be subjected to extreme heat loads on the order of 10-20 MW/m …

Subcritical Facility Design, Kacie Breeding

Chancellor’s Honors Program Projects

No abstract provided.

Improving Predictive Capabilities Of Classical Cascade Theory For Nonproliferation Analysis, David Allen Vermillion

Doctoral Dissertations

Uranium enrichment finds a direct and indispensable function in both peaceful and nonpeaceful nuclear applications. Today, over 99% of enriched uranium is produced by gas centrifuge technology. With the international dissemination of the Zippe archetypal design in 1960 followed by the widespread illicit centrifuge trafficking efforts of the A.Q. Khan network, traditional barriers to enrichment technologies are no longer as effective as they once were. Consequently, gas centrifuge technology is now regarded as a high-priority nuclear proliferation threat, and the international nonproliferation community seeks new avenues to effectively and efficiently respond to this emergent threat.

Effective response first requires an …

Creating And Operating The Nuclear Urban Kinetics Effects Simulator, Jerrad Phillip Auxier

Doctoral Dissertations

The ability to create an accurate method for determining the composition of post-detonation debris in an urban environment is an essential component of a proper nuclear forensics program. The methods necessary to create a high fidelity computer for modeling urban debris matrix creation is addressed. These methods include detonations varying in location in the lower 48 continental states and the yield of the weapon.

The ultimate goal of the research conducted in this area is to provide the nuclear forensics community with an effects modeling code that generates accurate urban surrogate recipes to be analyzed in laboratories. This code can …

Hot Filament Chemical Vapor Deposition Of Semiconducting Boron Carbide Thin Films, Michael Dylan Richardson

Masters Theses

A highly efficient, low-power, compact thermal neutron detection system with excellent gamma-ray discrimination is desired for a number of applications. ¹⁰B [boron- 10] has a large cross section for thermal values and a Q-value of 2.78 MeV. For this reason, investigations into boron carbide, boron nitride, and boron phosphide semiconductor neutron detectors are underway. Because boron carbide has the highest fraction of boron of the three, it holds the highest potential. With this in mind, a hot filament chemical vapor deposition (HFCVD) system was designed and built in order to grow thin films of boron carbide onto n-type silicon …

Practical Methods For Optimizing Equipment Maintenance Strategies Using An Analytic Hierarchy Process And Prognostic Algorithms, Gregory Michael Bosco

Masters Theses

Many large organizations report limited success using Condition Based Maintenance (CbM). This work explains some of the causes for limited success, and recommends practical methods that enable the benefits of CbM. The backbone of CbM is a Prognostics and Health Management (PHM) system. Use of PHM alone does not ensure success; it needs to be integrated into enterprise level processes and culture, and aligned with customer expectations. To integrate PHM, this work recommends a novel life cycle framework, expanding the concept of maintenance into several levels beginning with an overarching maintenance strategy and subordinate policies, tactics, and PHM analytical methods. …