Engineering Commons^™

Novel Fission Track Detection For Identification And Characterization Of Special Nuclear Materials, Jonathan Allen Gill

Doctoral Dissertations

Fission track detection and analysis is used primarily in nuclear safeguards to identify special nuclear material. Identification of isotopic ratios is a crucial step in understanding the intended use of nuclear material and the nature of the materials production cycle. Unfortunately, this methodology uses etchable track detectors that require significant expertise and intensive labor to process.

This study developed a novel method using lithium fluoride (LiF) as a fluorescing nuclear track detector to conduct fission track analysis for isotopic prediction of uranium enrichment. Individual latent tracks produced by fission products were observed in LiF for the first time. These tracks …

Development Of High-Performing Polydimethylsiloxane-Based Membranes For Carbon Dioxide Separation, Tao Hong

Doctoral Dissertations

Membrane separation is highlighted as one of the most promising approaches to mitigate the excessive CO₂ [carbon dioxide] emission, due to its significant reduction of energy cost compared with many conventional separation techniques. Unfortunately, the separation performance of current membranes does not meet the practical CO₂/N₂ [nitrogen] separation requirements. And due to the huge volume of industrial flue gas, membranes with exceptionally high permeability are needed for practical reasons.

Currently, the separation mechanism of most polymeric membranes is based on size-sieving. However, this method is not sufficient for CO₂/N₂ separations due to the …

Low Energy Recoil Simulations In Mgo, Linbo3, And Litao3 Using Ab Initio Molecular Dynamics, Benjamin Aaron Petersen

Doctoral Dissertations

Ab initio molecular dynamics (AIMD) was utilized to test a series of materials, MgO, LiNbO₃ , and LiTaO₃ , to determine defect structures produced due to low energy recoil events . The kinetic energy required to displace an atom from its lattice site, the threshold displacement energy, was calculated for an array of directions in each material, based on symmetry and complexity of the structure. MgO having a simple rock salt structure provided a model material for demonstrating computational techniques used later on LiTaO₃ and LiNbO₃ . The minimum values for displacing an atom were at …

Mechanical Behavior Of Pipeline Steels And An Al0.1cocrfeni High-Entropy Alloy, Bilin Chen

Doctoral Dissertations

This dissertation is composed of two parts. The first part focuses on the mechanical behavior study on pipelines steels. More specifically, the effect of hydrogen on the deformation behavior of the crack tip of an X52 pipeline steel specimen, and the overload effects on the fatigue crack growth of an x70 pipeline weld metal are discussed. For the second part of the dissertation, fatigue behavior of an Al0.1CoCrFeNi high-entropy alloy (HEA) is studied, and the influence of heat treatment is discussed.

The objectives of the first part of this proposed work are to (1) detect the influence of hydrogen on …

Transport Of Water And Ions Through Single-Walled Armchair Carbon Nanotubes: A Molecular Dynamics Study, Michelle Patricia Aranha

Doctoral Dissertations

The narrow hydrophobic interior of a carbon nanotube (CNT) poses a barrier to the transport of water and ions, and yet, unexpectedly, numerous experimental and simulation studies have confirmed fast water transport rates comparable to those seen in biological aquaporin channels. These outstanding features of high water permeability and high solute rejection of even dissolved ions that would typically require a lot of energy for separation in commercial processes makes carbon nanotubes an exciting candidate for desalination membranes. Extending ion exclusion beyond simple mechanical sieving by the inclusion of electrostatics via added functionality to the nanotube bears promise to not …

Modeling Of Dislocation Channel Formation And Evolution In Irradiated Metals, Peter James Doyle

Masters Theses

Defect-free dislocation channel formation has been reported to promote plastic instability during tensile testing via localized plastic flow, leading to a distinct loss of ductility and strain hardening in many low-temperature irradiated materials. In order to study the underlying mechanisms governing dislocation channel width and formation, the channel formation process is modeled via a simple stochastic dislocation-jog process dependent upon grain size, defect cluster density, and defect size. Dislocations traverse a field of defect clusters and jog stochastically upon defect interaction, forming channels of low defect-density. Based upon prior molecular dynamics (MD) simulations and in-situ experimental transmission electron microscopy (TEM) …

The Development Of Cesium Calcium Bromo-Iodide Scintillator For X-Ray And Gamma Ray Detection, Matthew Starr Loyd

Masters Theses

CsCaI₃:Eu [cesium calcium iodide doped with europium] is a promising scintillator material that can be grown from the melt, but undergoes a tetragonal to orthorhombic phase transition upon cooling at 255 °C [degrees Celsius], causing twinning and cloudiness. The purpose of this work is to suppress this solid to solid phase transition in the CsCaI₃:Eu scintillator, which has a light yield of ~40000 ph/Mev and energy resolution at 662keV of ~4%, by halide replacement to form the compound CsCaBr_xI_3-x:Eu [cesium calcium bromo-iodide doped with europium]. Crystals 8 cm³ [cubic centimeters] in …

Correlating Long-Term Lithium Ion Battery Performance With Solid Electrolyte Interphase (Sei) Layer Properties, Seong Jin An

Doctoral Dissertations

This study was conducted to understand effects of some of key factors (i.e., anode surface properties, formation cycling conditions, and electrolyte conditions) on solid electrolyte interphase (SEI) formation in lithium ion batteries (LIBs) and the battery cycle life. The SEI layer passivates electrode surfaces and prevents electron transfer and electrolyte diffusion through it while allowing lithium ion diffusion, which is essential for stable reversible capacities. It also influences initial capacity loss, self-discharge, cycle life, rate capability and safety. Thus, SEI layer formation and electrochemical stability are primary topics in LIB development. This research involves experiments and discussions on key factors …

First-Principles Study Of Point Defect Behavior At Interfaces And In-Plane Strain Fields, Jianqi Xi

Doctoral Dissertations

Interfaces in solid materials are the so-called boundaries, separating crystals with the same structure and chemistry but different orientations, e.g. grain boundaries (GBs), different stacking sequences, e.g. stacking faults (SFs), or crystals with different structures and/or chemistries as well as orientations, e.g. the interface between substrate and thin film. In this study, first-principles calculations are used to investigate the defect behavior at different interfaces and in-plane strain fields, such as stacking fault (SF) in silicon carbide (SiC), in-plane strain field near interfaces in potassium tantalate (KTaO₃), and grain boundary in ceria (CeO₂).

Results show that the …

Advanced Purification And Direct-Write 3d Nanoprinting Via Focused Electron Beam Induced Deposition, Brett Bloxton Lewis

Doctoral Dissertations

This dissertation addresses three difficulties with focused electron beam induced deposition preventing broader application; purity, spatial control, and mechanical characterization.

Focused electron beam induced deposition (FEBID) has many advantages as a nanoscale fabrication tool. It is compatible for implementation into current lithographic techniques and has the potential to direct-write in a single step nanostructures of a high degree of complexity. FEBID is a very versatile tool capable of fabricating structures of many different compositions ranging from insulating oxides to conducting metals.

Due to the complexity of the technique and the difficulty in directly measuring many important variables, FEBID has remained …

Dewetting Properties Of Ag-Ni Alloy Thin Films, Benjamin Scott Wolf

Masters Theses

In this study, pulsed laser induced dewetting of both patterned and continuous Nickel (Ni)-Silver(Ag) thin films was investigated extensively as a novel way to perform directed assembly of nano-particles. First, continuous Ni-Ag thin film dewetting was studied on both bulk and TEM (Transmission electron microscope) membrane substrates at a variety of compositions to better understand the dewetting dynamics of the Ni-Ag system. Then, patterned Ni-Ag thin film dewetting was studied on both bulk and TEM membrane substrates to understand how different patterns and thin film configurations effect nano-particle distribution and formation. All of this work was done in anticipation of …

Modulation Of Cell Behaviors On Photo-Crosslinked Polymer Networks And Polymer Spherulites, Jinbo Dou

Doctoral Dissertations

This dissertation presents novel biodegradable and photo-crosslinkable poly(-caprolactone) acrylates (PCLAs) to achieve polymer networks with controllable surface chemistry, stiffness, and topographical features, as well as crystallization-induced PCL, poly(3-hydroxybutyrate) (PHB) and poly(L-lactic acid) (PLLA) surfaces for investigating cell-material interactions. Chapter I reviews the recent progress of injectable polymeric biomaterials in the last decade for various tissue engineering applications. Chapter II investigates the variation of thermal and mechanical properties of PCL triacrylate (PCLTA) networks with different crosslinking time, and further studies the smooth muscle cell (SMC) responses to these networks. Chapter III studies the SMC responses to hydrolyzed PCLTA/methoxyl polyethylene glycol monoacrylate …

Effect Of Crosslinking On Carbon Nanotube Materials Through Chemical Treatment And Irradiation, Xinyi Lu

Doctoral Dissertations

Carbon nanotubes (CNTs) exhibit a variety of exceptional properties, especially their ultrahigh tensile strength on the order of 100GPa show promise for constituting the next-generation carbon fiber. However, challenges remain to translate these properties into useful technology, primarily due to the sliding of the tubes past one another under tensile loading. The work presented in this dissertation is focused on enhancing the interaction between the CNTs and their bundles in a macro-assembly, in order to improve the tensile properties of the material.

Applying inter-tube crosslinks has been predicted to significantly enhance the stress transfer between the CNT components. We developed …

Experimental And Computational Investigation Of High Entropy Alloys For Elevated-Temperature Applications, Haoyan Diao

Doctoral Dissertations

To create and design novel structural materials with enhanced creep-resistance, fundamental studies have been conducted on high-entropy alloys (HEAs), using (1) thermodynamic calculations, (2) mechanical tests, (3) neutron diffraction, (4) characterization techniques, and (5) crystal-plasticity finite-element modeling (CPFEM), to explore future candidates for next-generation power plants.

All the constituent binary and ternary systems of the Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr- Fe-Ni systems were thermodynamically modeled within the whole composition range. Comparisons between the calculated phase diagrams and literature data are in good agreement. The Al_xCrCuFeMnNi HEAs have disordered [face-centered-cubic (FCC) + body-centered-cubic (BCC)] crystal structures. Excessive alloying of the Al …

Excitations Of Quasi-Particles In Nanostructured Systems, Jingxuan Ge

Doctoral Dissertations

The excitation of quasiparticles, like the investigated excitons and plasmons here, are the optically most prominent responses of materials. In nanostructured system, the sample quality is crucial for quantitative investigations of these optical excitations. We used electron beam evaporation, nano-second laser dewetting, and electron metalorganic chemical vapor deposition techniques to prepare well-defined and “clean” transmission electron microscopy (TEM) samples. Electron energy-loss microscopy (EELS) performed in STEM mode was employed to investigate the structural and electro-optical properties. Quantifit software was used to analyze the EELS spectra quantitatively in terms of inelastic scattering probability, energy and lifetime.

We found that the ferroplasmon …

Renewable And Abundant Battery Components, Jordan T. Sutton, Daniel San Roman, Austin Thomas, Daniel Kitsmiller, Alec Affolter

Chancellor’s Honors Program Projects

No abstract provided.

Processing-Property-Structure Relationships Of Carbonaceous Materials Derived From Renewable Lignin Products, Valerie García-Negrón

Masters Theses

Efforts to effectively use lignin, a by-product of paper and biofuels production, have been carried out for several decades. This renewable resource has potential for use as a carbonaceous material due to its aromatic structure and high carbon content, reminiscent of graphite. The search for new carbon-based materials is extremely active, because they are necessary components in many applications, such as energy storage, electronics, catalysis, and lubricants. Traditional carbon-based materials are derived or mined from petroleum or coal, thus, contributing to pollution, national security risks, and anthropogenic climate change. Lignin, a carbon-rich component found in the tissues of vascular plants, …

End-Capping Star-Like Polycaprolactone With Different Functional Groups And The Interaction With Smooth Muscle Cells, Qingya Zeng

Masters Theses

Polycaprolactone (PCL) is a PDA-approved biodegradable polymer with excellent biocompatibility and flexibility. My work has been designed to find out how different functional end groups in star-like PCL samples affect the surface properties (such as hydrophilicity, morphology) and bulk properties (such as thermal, mechanical, rheological properties, and crystallization), and consequently the behavior and functions of primary rat aortic smooth muscle cells (SMCs).

I focused on the synthesis of PCL with different functional groups and their characterizations. In chapter 2, PCL samples with four or six hydroxyl end groups were synthesized with different molecular weights ranging from 8,000 to 30,000 g/mol …

Surface Energy In Bond-Counting Models On Bravais And Non-Bravais Lattices, Tim Ryan Krumwiede

Doctoral Dissertations

Continuum models in computational material science require the choice of a surface energy function, based on properties of the material of interest. This work shows how to use atomistic bond-counting models and crystal geometry to inform this choice. We will examine some of the difficulties that arise in the comparison between these models due to differing types of truncation. New crystal geometry methods are required when considering materials with non-Bravais lattice structure, resulting in a multi-valued surface energy. These methods will then be presented in the context of the two-dimensional material graphene in a way that correctly predicts its equilibrium …

All Acrylic Based Thermoplastic Elastomers: Design And Synthesis For Improved Mechanical Performance, Wei Lu

Doctoral Dissertations

Thermoplastic elastomers (TPEs) have been widely studied because of their recyclability, good processability, low production cost and distinct performance. Compared to the widely-used styrenic TPEs, acrylate based TPEs have potential advantages including exceptional chemical, heat, oxygen and UV resistance, optical transparence, and oil resistance. However, their high entanglement molecular weight lead to “disappointing” mechanical performance as compared to styrenic TPEs. The work described in this dissertation is aimed at employing various approaches to develop the all acrylic based thermoplastic elastomers with improved mechanical performance.

The first part of this work focuses on the introduction of acrylic polymers with high glass …

Silicon Carbide Materials Properties Selection For Mechanical Seal Faces, William Charles Hoskins

Chancellor’s Honors Program Projects

No abstract provided.