Modeling And Simulation Of C2 System For Intercepting Lss Targets,
2019
Beijing Information Science and Technology University Beijing Key Laboratory of High Dynamic Navigation Technology, Beijing 100101, China;
Modeling And Simulation Of C2 System For Intercepting Lss Targets, Zhipeng Zhang, Su Zhong
Journal of System Simulation
Abstract: For analyzing the characteristics of low slow small (LSS) targets, a model of command and control (C2) system is established, the corresponding strategy is designed, and the designed scenario is simulated, which can improve the interception effect of the system on LSS targets. In the part of modeling, the trajectory of the target is plotted, the radar information is analyzed, the coordinate transformation between the parts is designed, and the track fusion is designed, which can improve discovery process. As the different characteristics of LSS targets, combined with the limited resources for intercepting weapons, the threat assessment strategies and …
Collaborative Optimal Scheduling Method For Production And Energy Consumption In Discrete Manufacturing Process,
2019
Engineering Research Center of Internet of Things Technology Applications Ministry of Education, Jiangnan University, Wuxi 214122, China;
Collaborative Optimal Scheduling Method For Production And Energy Consumption In Discrete Manufacturing Process, Wenjie Chen, Wang Yan
Journal of System Simulation
Abstract: The collaborative optimization of manufacturing process and energy consumption is one of the hot research issues in intelligent optimization manufacturing. To solve the scheduling optimization problem of discrete manufacturing process, a coordinated scheduling optimization of production and energy consumption with the shortest processing time and lowest energy consumption is established. The model proposes an improved differential evolution algorithm based on adaptive mutation and crossover probability factor to solve the optimal scheduling problem. By establishing the operation-based coding method, the application of continuous algorithm in discrete optimization scheduling problem is realized by using ascending ordering rules. The effectiveness of …
Simulation Study On Control Performance Of Pmsm-Dtc Under Different Switching Tables,
2019
1. Department of Electrical Engineering, College of Electronics and Information Engineering, Tongji University, Shanghai 201804, China; ;
Simulation Study On Control Performance Of Pmsm-Dtc Under Different Switching Tables, Haoyuan Luo, Dengke Yuan, Zongjie Hu
Journal of System Simulation
Abstract: In the motion system of permanent magnet synchronous motor (PMSM) under direct torque control (DTC), the inverter produces high-frequency common-mode voltage (CMV) based on the switching table when outputting voltage vectors, and its double-closed-loop Bang-Bang control structure also causes current harmonic distortion and high-frequency ripple of the torque. A simulation model is established for PMSM motion system under DTC based on Matlab/Simulink using different switching tables, where performance and CMV between 7 vectors and 6 vectors switching tables are compared respectively. The results demonstrate that both have similar dynamic performance; relative to 6 vectors switching table, 7 vectors switching …
Simulation Study Of Ev Sharing Service In Huadu District, Guangzhou,
2019
Department of civil engineering, Tsinghua University, Beijing 100084, China;
Simulation Study Of Ev Sharing Service In Huadu District, Guangzhou, Tingting Li, Jianping Wu
Journal of System Simulation
Abstract: Electric vehicle (EV) sharing service plays an important role in the construction of the intelligent city, which can reduce the traffic emissions and cut down the ownership of private cars. In order to explore the traffic and environment effectiveness of the car sharing service, this paper builds a microscopic simulation model of EV sharing service. Based on the survey data, a simulation model containing 51 intersections and 107 roads is conducted. Considering 5 different traffic scenes, the paper evaluates the service from various viewpoints. The results demonstrate that there is no distinct influence on the traffic efficiency. However, …
Simulation Of Wind Power Prediction Based On Improved Elm,
2019
Engineering Research Center of Internet of Things Technology Applications Ministry of Education, Wuxi 214122, China;
Simulation Of Wind Power Prediction Based On Improved Elm, Wang Hao, Wang Yan, Zhicheng Ji
Journal of System Simulation
Abstract: To predict the range of ultra-short-term wind power fluctuation effectively, a combined forecasting model based on fuzzy information granulation (FIG) and genetic algorithm optimization extreme learning machine (GA-ELM) is proposed. The parameters of wind power are granulated by fuzzy information, and the corresponding valid information including the maximal value, the minimum value, and the general average value in time series window is further extracted. By integrating the effective components of each parameter as training samples, the GA-ELM-based prediction model is established. The range of wind power fluctuation in next time series is forecasted through using the optimized model. The …
Target Tracking Simulation For Unmarked Augmented Reality System Based On Kcf,
2019
1. Missile Engineering Academy of Rocket Force Engineering University , Xi'an 710038, China; ;
Target Tracking Simulation For Unmarked Augmented Reality System Based On Kcf, Zhili Zhang, Wang Chao, Long Yong, Shaodi Wang
Journal of System Simulation
Abstract: An AR system based on the kernelized correlation filter (KCF) target tracking is designed for solving the problem of the insufficiency of tracking in the unmarked augmented reality (AR). The KCF is used to identify and track the targets. The relevant parameters of the camera position are imported. The openGL graphical program interface is called to load the precast object onto the target. The KCF simulation experiment is carried out to track the target with visual studio. The results show that the AR application system based on KCF method can effectively improve the real-time performance of target tracking, and …
Key Points Analysis And Simulation For System Design Of Airborne Was-Gmti Radar,
2019
College of Information Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
Key Points Analysis And Simulation For System Design Of Airborne Was-Gmti Radar, Yan He, Daiyin Zhu
Journal of System Simulation
Abstract: Wide area surveillance-ground moving target detection (WAS-GMTI) mode is one of the important modes for most multi-functional airborne radar. System design of the WAS-GMTI mode can affect the final moving targets detection and tracking abilities to a great extent. Therefore, research focuses on the system design of multi-channel WAS-GMTI radar system. The expression of WAS-GMTI radar echo (including the crab angle) is derived. Signal to noise ratio (SNR) and clutter to noise ratio (CNR) are presented. These are the preparations and foundations for the further discussion. Four key points are detailedly analyzed in the process of system design of …
Collision Avoidance Performance Improvement For Tcas In Multi-Aircraft Situations Based On State Prediction,
2019
College of Information Systems and Management, National University of Defense Technology, Changsha 410073, China;
Collision Avoidance Performance Improvement For Tcas In Multi-Aircraft Situations Based On State Prediction, Tang Jun, Fen Zhu, Wan Yu, Songyang Lao
Journal of System Simulation
Abstract: Currently the density of the airspace increases with the air traffic flow increasing significantly, and therefore the conflict occurrence possibility of two or multiple aircraft raises. However, the traffic collision avoidance system (TCAS) may not be able to resolve all the collision problems of multi-threat situation. There is an active demand to improve its performance in multi-threat situation. This paper mathematically describes the traditional TCAS anti-collision mechanism, and achieves its expansion in the horizontal direction, thus proposes the improvement algorithm of collision avoidance performance for TCAS in multi-aircraft situations based on the state prediction. Adjusting the height and vertical …
Evaluation Model On The Vulnerability Of Mining Area Ecosystem Based On Object-Function Petri Net,
2019
Management College, Xi’an University of Architecture & Technology, Xi’an 710055, China;
Evaluation Model On The Vulnerability Of Mining Area Ecosystem Based On Object-Function Petri Net, Su Jia, Guangqiu Huang
Journal of System Simulation
Abstract: Introducing the concept of function into traditional object Petri net, a new evaluation model of ecosystem vulnerability named object-function Petri net model (OFPNEM) was put forward. The facilitating and suppressing factors of the ecosystem degradation were analyzed in this evaluation model. Trigger conditions of vulnerability were depicted as transitions and the state of ecosystem in the process of change were depicted as object places. Logical causality of environmental degradation could be represented directly. Furthermore, evaluation model on the vulnerability of mining area ecosystem based on object-function Petri net was proposed. Through object-function Petri net, combining the rules of model, …
Numerical Study On Energy Absorption Mechanism Of Sandwich Plates Under Blast Loading,
2019
College of Naval Architecture and ocean Engineering , Naval Univ. of Engineering, Wuhan 430033, China;
Numerical Study On Energy Absorption Mechanism Of Sandwich Plates Under Blast Loading, Jinlei Mu, Shaosong Min, Peng Fei
Journal of System Simulation
Abstract: In order to study the anti-explosion ability and energy absorption mechanism of the sandwich plates under blast loading, the FEM software Abaqus/Explict is used to simulate the response process of the solid plate and the sandwich plate. The solid plate is modeled with shell elements and continuum elements respectively. The results show the elements type has little effect on the results. During the same condition the deformation of the front plate is bigger than the solid plate, while the deformation of the back plate is smaller than the solid plate. The external force work mainly converses the kinetic energy …
A Practical Approach For Building The Model Family’S Framework Of A Simulation System,
2019
1. Troop 31002 of the PLA, Beijing 100049, China; ;2. School of System Engineering, National University of Defense Technology, Changsha 410073, China;
A Practical Approach For Building The Model Family’S Framework Of A Simulation System, Xiaocheng Liu, Bin Chen, Xiaogang Qiu
Journal of System Simulation
Abstract: The model architecture of a simulation system is derived from its family’s framework, and the building approach is the first issue to be tackled to build a simulation system. Considering the experience for building model family’s framework of some typical simulation systems and the recent development of modeling technology, this paper gives a measure-centred guidable procedure for building the model family’s framework of a simulation system, summarizes its basic rules, as well as lists some key technologies and supporting tools. The approach describes step-by-step the process of framework building by two phases (eight steps). Our proposed approach has been …
Edge-Side Simulation Method And Framework Based On Micro-Services,
2019
1.School of Computer Science, Beijing Institute of Technology, Beijing 100081, China; ;
Edge-Side Simulation Method And Framework Based On Micro-Services, Yanlong Zhai, Wenxin Sun, Tianhong Bao, Yang Kai, Duzheng Qing
Journal of System Simulation
Abstract: Aiming at the multi-devices, big data and low-latency simulation requirements in the Internet of Things, we define a concept of edge-side simulation and a simulation mode based on micro-services referring to the computational characteristics and architecture of edge computing and fog computing. For the link constraint and high-latency processing defects of "cloud simulation", a lightweight edge-side simulation platform framework combining edge computing and fog computing is designed, and the simulation speed is further accelerated by real-time simulation with LVC simulation system. Compared with the existing simulation frameworks, the edge-side simulation framework has the remarkable features of lightweight, high real-time, …
Research On Battle Damage Assessment Method Of Aggregating Target In Theater-Level,
2019
College of System Engineering, National University of Defense Technology, Changsha 410073, China;
Research On Battle Damage Assessment Method Of Aggregating Target In Theater-Level, Qihao Hou, Yiping Yao, Cao Xiang
Journal of System Simulation
Abstract: The damage adjudication model in the theater-level combat simulation is the key to judge the target damage status and evaluate the attack process. The current research mainly focuses on the abstract modeling of single ground target, and the needs of the damage assessment of ground aggregation targets in large-scale joint operations cannot be met. The ground aggregation target is decomposed into different sub-targets through the structure tree, and the sub-target value is given to determine the main attacked target. Standard sub-targets are created based on the sub-target's shape and presence or absence of protection. The mapping relationship between …
Volume Rendering Viewpoint Selection Based On Adaptive Scaleable Chaotic Particle Swarm Optimization,
2019
College of Computer Science and Technology of Henan Polytechnic University, Jiaozuo 454000, China;
Volume Rendering Viewpoint Selection Based On Adaptive Scaleable Chaotic Particle Swarm Optimization, Yanyang Zeng, Zehao Zhang, Yunxia Feng
Journal of System Simulation
Abstract: People often perform volume rendering viewpoint selection by means of manual exploration. However, when the volume data is large, it often takes a lot of time to reduce the efficiency. An adaptive scaling chaotic particle swarm optimization algorithm is proposed for the automatic selection of viewpoints in volume rendering. The algorithm introduces image information entropy to evaluate the quality of images corresponding at different viewpoints. The entropy value is used as the basis for optimizing the viewpoint and the fitness value of the particle swarm optimization, so as to realize the intelligent and automatic choice, and finally obtain the …
Research Of Analysis Method Of Presenters’ Reputation Record,
2019
Zhengzhou Institute of Information Science and Technology, Zhengzhou 450001, China:;State Key Laboratory of Mathematical Engineering and Advanced Computing, Zhengzhou 450001, China;
Research Of Analysis Method Of Presenters’ Reputation Record, Zhiyong Yu, Wang Na, Niu Kan, Jindong Wang
Journal of System Simulation
Abstract: In order to satisfy the requirement of service presenters’ credibility from recommendation system, this paper put forward a method based on the analysis of reputation record to find the most credible presenters. The preference similarity between different users is calculated with users’ preference vectors. The relevance of the fields, recommendation response rate and recommendation satisfaction rate are then calculated to filter the presenters. The presenters’ current reputation is calculated by introducing the penalty factor. We filter the presenters’ reputation record with localized changes and tendentious changes and calculate the skewness coefficient and kurtosis coefficient of the reputation records …
Visualized Parameter-Tuned Algorithm For Control Loading System,
2019
1. School of Air Transport Shanghai University of Engineering Science, Shanghai 201620, China; ;
Visualized Parameter-Tuned Algorithm For Control Loading System, Xie Chen, Shuchu Zhang, Zhenyu Sun
Journal of System Simulation
Abstract: To improve the fidelity of flight simulators, a control loading system is introduced in this paper which has the most direct effect on the pilot's intuitive perception. The overall design, hardware construction and digital simulation results of the system are given. In the process of system realization, the visual displacement-force loading configuration scheme is adopted to solve such problems as requirement changes or parameter excursions in hardware. The algorithm of output waveform curve adjustment based on cubic spline interpolation is proposed and the parameters are adjusted according to demand through graphical operation interface by maintenance personnel. The traditional method …
Development History And Case Study Of Interoperability Between Us Combat Simulation And C2 Systems,
2019
Department of Equipment Command and Administration, Academy of Armored Force Engineering, Beijing 100072, China;
Development History And Case Study Of Interoperability Between Us Combat Simulation And C2 Systems, Xiangzhong Xu, Zaijiang Tang, Yaxin Tan
Journal of System Simulation
Abstract: The analysis of heterogeneity between U.S. combat simulation and command & control (C2) systems is carried out. The roadmap, its main development stage and main tendency of interoperability between US combat simulation and C2 systems are also analyzed. Two case studies, Viz., the Naval Simulation System/the Global Command and Control - Maritime (NSS/GCCS-M) Federation and C4I Team Training System (CTTS) are conducted, which are representatives of bidirectional interfaces and embedded interoperability respectively. The main measures such as ensuring interoperability which is a shared responsibility between the M&S and C2 communities, long-term plan and coordination are beneficial to the promotion …
Research On Assessment Of Operation System‘S Resilience Based On Test Bed,
2019
1.College of Joint Operation, National Defense University, Beijing 100091, China; ;2.Graduate School, National Defense University of PLA, Beijing 100091, China;
Research On Assessment Of Operation System‘S Resilience Based On Test Bed, Rong Ming, Xiaofeng Hu, Jingyu Yang
Journal of System Simulation
Abstract: The warfare under the information condition is the System of Systems (SOS) combat. The resilience of SOS is the ability to support the functions necessary for mission success with higher probability, shorter periods of reduced capability, and across a wider range of scenarios, conditions, and threats, in spite of hostile action or adverse conditions. It has gradually become a focus in developed countries. The problems of SOS resilience evaluation are analyzed and a analysis method under test bed simulation is constructed. By meaning of integrity,dynamic and confrontation, we propose resilience assessment models to evaluate resilience by competitive game and …
Multi-Stage Filtering Method For Pedestrian Navigation And Location,
2019
Beijing Key Laboratory of High Dynamic Navigation Technology, University of Beijing Information Science & Technology, Beijing 100101, China;
Multi-Stage Filtering Method For Pedestrian Navigation And Location, Zhidan Gu, Li Qing, Zhao Hui
Journal of System Simulation
Abstract: In the process of navigation and location of a pedestrian for a wearable IMU, the inertial device generates an accumulated drift error affecting the navigation and location accuracy of pedestrian navigation. A multi-stage filtering method is studied: after the zero-speed detection and the zero-speed correction based on Extended Kalman Filter are carried out, the vector domain is divided by the indoor geometric layout features, and the projected matching model is used to determine the optimal coordinates of the nodes to get the trajectory. Using the self-developed MIMU pedestrian navigation module, a field experiment was conducted. The experimental results show …
Numerical Simulation Of Shock Wave Effect On Damaged Upper And Lower Adjacent Structures Of Ships,
2019
1.College of Coast Defence Arm, Naval Aeronautical University, Yantai 264001, China; ;
Numerical Simulation Of Shock Wave Effect On Damaged Upper And Lower Adjacent Structures Of Ships, Run Miao, Weili Wang, Hongjie Liu, Shiyong Wu, Zeng Liang
Journal of System Simulation
Abstract: The damage effect of shock wave on the upper and lower adjacent cabin structure of small warship is studied. LS-DYNA finite element analysis software is used. Damage modes of upper and lower adjacent cabin structures under dynamic and static explosion are analyzed. Cabin damage under different charging speeds is calculated. The results show that in the dynamic explosion state, there is a big difference between the shock wave field and the static explosion, which causes different modes of bulkhead damage. When the explosive happens in the lower cabin, the upper cabin bulkhead is extruded by the deformation of the …
