Research On Clock Synchronization Of Simulation System Based On Ethernet And Optical Fiber Network,
2019
Shanghai Institute of Mechanical and Electrical Engineering, Shanghai 201109, China;
Research On Clock Synchronization Of Simulation System Based On Ethernet And Optical Fiber Network, Yulin Meng, Shen Tao, Shuaihao Wang, Lüyi Zhao, Chengshi Tang
Journal of System Simulation
Abstract: With the development of simulation communication and Ethernet clock synchronization technology, the traditional timing simulation method based on real-time operating system can not meet the accuracy requirements of clock synchronization between multi-simulation systems. A time synchronization method between simulation systems based on IEEE1588 clock synchronization protocol and optical fiber reflection memory network is proposed, in which the Beidou/GPS timing device periodically calibrates the real-time operating system, and the real-time operating system divides the frequency of the calibrated clock information and synchronizes the clock of each simulation system through the high-speed optical fiber reflection memory network. The clock synchronization …
Research On Control Technology Of Aeroengine Heat Exchanger,
2019
1. School of Energy and Power Engineering, Beihang University, Beijing 100191, China; ;2. Collaborative Innovation Center for Advanced Aero-Engine, Beihang University, Beijing 100191, China; ;
Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua
Journal of System Simulation
Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.
Downhole Drilling Processing Data Acquisition And Stick Slip Characteristic Analysis,
2019
1. School of Information and Communication Engineering, Beijing Information Science and Technology University, Beijing 100101, China; ;
Downhole Drilling Processing Data Acquisition And Stick Slip Characteristic Analysis, Huang Sheng, Zhang Tao, Chongjun Huang, Yumei Li, Deng Hu, Zhang Xia
Journal of System Simulation
Abstract: During oil drilling process, drill string vibrations are detrimental to the bit and drill string, which even causes failure of equipment. Researches show that, studying the law of near bit vibration data can reduce non-production time (NPT) and improve drilling efficiency. This paper uses power spectral density and wavelet transform to analyze vibration signals, then compares with normal drilling situation to find out stick slip characteristics. The results show that, when stick slip occurs, the mean value of lateral vibration fluctuates greatly, which indicates stick slip is mainly based on torsional vibration. From the perspective of power spectral density …
Research On Mechanical Configuration Of Automatic Container Terminals Based On Simulation Optimization Method,
2019
1. Dalian Neusoft University of Information, Dalian 116023, China; ;
Research On Mechanical Configuration Of Automatic Container Terminals Based On Simulation Optimization Method, Shaozheng Yu, Dongshi Sun, Chen Jing, Yongchao Li
Journal of System Simulation
Abstract: In the study of mechanical configuration problem of automated container terminal, a system simulation model based on discrete event simulation is constructed. The key parameters and interference factors that affect the performance of the system are fully considered in the model and a mechanical scheduling algorithm interface to ensure the effectiveness of the simulation model is designed. On the premise of ensuring the reliability of the container terminal system, a cycle optimization method of mechanical configuration scheme is proposed to minimize the cost. An example is given to solve the mechanical configuration scheme of an automatic container terminal. …
Research On The Simulation Technology For Multi-Aerocraft Cooperative Guidance,
2019
1. Science and Technology on Complex System Control and Intelligent Agent Cooperation Laboratory, Beijing 100074, China; ;2. Beijing Electromechanical Engineering Institute, Beijing 100074, China;
Research On The Simulation Technology For Multi-Aerocraft Cooperative Guidance, Li Jing, Han Jian, Zhang Qing
Journal of System Simulation
Abstract: The formal system of multi- aerocraft cooperative simulation system is identified as the discrete event system & different equation system specifications (DEV&DESS) through the analysis of the composition and running mechanism. The running control problem of cooperative simulation system is transformed into simulation control problem of a specific DEV&DESS system. A dynamic operation control method for cooperative guidance simulation system based on coordinator is proposed, and this method is validated by real-time mathematical simulation experiments.
Knowledge Representation Method Of Joint Operation Situation Based On Knowledge Graph,
2019
National Defense University of PLA, Beijing 100091, China;
Knowledge Representation Method Of Joint Operation Situation Based On Knowledge Graph, Baokui Wang, Wu Lin, Xiaofeng Hu, Xiaoyuan He
Journal of System Simulation
Abstract: Lacking of common knowledge for understanding and judging complex situation of operation by machines is one of the difficulties in intelligent situation cognition. The knowledge representation methods based on knowledge graph are reviewed. The characteristics and difficulties of joint operation situation knowledge representation are analyzed. Moreover, the concept of scenario knowledge graph is presented, as well as the knowledge sources and basic content of scenario knowledge graph are described. This paper also points out that the joint knowledge representation method based on discrete symbols and continuous vectors in specific scenario is an effective way to express joint operation situation …
Decision-Making Method For Formulating Spares Reserve Scheme Based On Deep Neural Network,
2019
Information Engineering University, PLA Strategic Support Force, Henan, Zhengzhou 450001, China;
Decision-Making Method For Formulating Spares Reserve Scheme Based On Deep Neural Network, Yunjing Zhang, Guangming Tang, Xiaoyu Xu
Journal of System Simulation
Abstract: Spare parts classification is important for spare parts storage and is a key part of spare parts decision-making activities. This paper analyzes the factors affecting the reserve scheme of wartime spares. Then by analyzing the inherent attributes of wartime spares, two methods of spare parts classification are proposed to determine the variety and quantity of wartime spares based on deep neural network: (1) Ranks wartime spares according to their importance. A relatively simple deep neural network is used to analyze every attribute of the wartime spares in turn; (2) Inputs all the attributes of wartime spares into a relatively …
A Mesh Model Simplification Method Based On Visual Feature Preservation,
2019
1. Army Aviation Institute, Beijing 100123, China; ;2. Marine College, Northwestern Polytechnical University, Xi'an 710072, China;
A Mesh Model Simplification Method Based On Visual Feature Preservation, Che Li, Dejun Tang, Shimin Li, Fengju Kang
Journal of System Simulation
Abstract: Aiming at the problems of mesh visual feature loss and oversimplification in mesh simplification algorithm, a visual feature preservation based triangle mesh model simplification algorithm is proposed. The multi-viewpoint perception method is used to measure the visual perception error caused by the difference between the original and the simplified model in the two-dimensional view under the optimal viewpoint set. Based on QEM algorithm, a novel geometric error metric is built by introducing the triangle shape factor. The triangle collapse error function is defined by combining visual perception and geometric error to control the simplified depth of the model. Through …
Urban Functional Area Identification Method Based On Mobile Big Data,
2019
1. Beijing Information Science & Technology University, School of Information and Telecommunication Engineering, Beijing 100101, China; ;2. Beijing Key Laboratory of High Dynamic Navigation Technology, University of Beijing Information Science & Technology, Beijing 100101, China;
Urban Functional Area Identification Method Based On Mobile Big Data, Xiao Di, Xiaoyong Zhang, Hu Yang
Journal of System Simulation
Abstract: With the rapid development of urbanization, the function of urban land is constantly evolving. It is of great significance to identify urban functional areas in real time and accurately. In recent years, accompanied by the popularity of smart phones and the rapid development of the Internet, mobile phones have become sensors of human activities. In this paper, a method of urban functional area identification based on time series mobile phone data mining and POI semantics analysis is proposed. The time series feature of remaining mobile phone positioning is extracted facing block scale. And a FCM clustering algorithm based …
Design Of A Flexible System Simulation Evaluation Framework,
2019
College of System Engineering, National University of Defense Technology, Changsha 410072, China;
Design Of A Flexible System Simulation Evaluation Framework, Rusheng Ju, Zimin Cai, Wang Song, Wang Peng
Journal of System Simulation
Abstract: To meet variable evaluation requirement of complex system simulation, this paper puts forward a design strategy of flexible effectiveness evaluation framework. The composition structure of system simulation evaluation framework is analyzed. To help users design reference dynamically, the method of evaluation reference edit and display is introduced based on Web. To enhance the extensibility of evaluation model, the method of interface design and code generation is investigated. To ensure the flexibility and extensibility of evaluation framework, the relation and mapping mechanism of evaluation references, evaluation model and evaluation result is studied. The framework is realized and verified in …
Intelligent Fire Rescue Based On Internet Of Things And Virtual Reality,
2019
School of Electronic and Electrical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China;
Intelligent Fire Rescue Based On Internet Of Things And Virtual Reality, Fengting Yan, Zhicai Shi, Qianmin Su, Dong Jing, Jue Chen, Yunyu Shi, Tang Xian
Journal of System Simulation
Abstract: The integration of virtual reality, Internet of Things and artificial intelligence can provide intelligent WebVR interaction for fire rescue decision-making. However, it is necessary to solve the problems of data lightweight, real-time data transmission based on the Internet of Things, and visualization of fire scenario data on the web, and to build effective mechanisms and algorithms. This paper proposes an intelligent fire rescue (IVIFR) mechanism based on the integration of Internet of Things and Virtual Reality, gives a virtual intelligent fire rescue (VIFR) algorithm, and constructs a prototype system of intelligent fire rescue. The VIFR algorithm …
Intelligent Manufacturing Plan Management Based On Digital Twins,
2019
1. Beijing Complex Product Advanced Manufacturing Engineering Research Center, Beijing Simulation Center, Beijing 100854, China; ;2. State Key Laboratory of Intelligent Manufacturing System Technology, Beijing Institute of Electronic System Engineering, Beijing 100854, China; ;3. Science and Technology on Space System Simulation Laboratory, Beijing Simulation Center, Beijing 100854, China;
Intelligent Manufacturing Plan Management Based On Digital Twins, Yingying Xiao, Wang Mei, Liqin Guo, Xing Chi, Changhui Zhuang
Journal of System Simulation
Abstract: For the multi-variety and small-batch manufacturing mode, the planning management system cannot be timely automatically adjusted according to uncertain factors. This paper proposes an intelligent manufacturing plan management system based on factory digital twins. The plan management PDCA business process model is established. In addition, the processing logic model and constraints of the periodic static scheduling model and the dynamic emergency scheduling model are proposed. Based on the planning management case of hybrid assembly of two types of aerospace complex products, it is verified that the management model proposed in this paper can support the intelligent dynamic adjustment of …
A Cloud Service Composition Optimization Based On Hnn,
2019
1. Linfen Vocational and Technical College, Linfen 041000, China; ;2. School of Educational Science, Shanxi Normal University, Linfen 041000, China;
A Cloud Service Composition Optimization Based On Hnn, Huili Zhang, Zhihe Li
Journal of System Simulation
Abstract: With the rapid development of Cloud service application, how to effectively optimize the composition of Cloud services on cloud platform and improve the overall performance of cloud platform system have become an urgent research issue. In order to improve the efficiency of Cloud services, a combined optimization model based on Hopfield neural network is proposed. The problem of Cloud services is modeled. The problem is expressed as Hopfield Neural Network energy model for optimization, and a PSO group algorithm with Cauchy disturbance is designed to improve the Hopfield model. The experimental comparison shows that the method can improve …
A Parallel Simulation Method For Combat Organization And Implementation,
2019
Army Academy of Armored Forces, Military Exercise and Training Center, Beijing 100072, China;
A Parallel Simulation Method For Combat Organization And Implementation, Yaxin Tan, Jianhua Luo, Fan Rui, Zhiming Dong
Journal of System Simulation
Abstract: Aiming at the difficult problem of battle parallel simulation, the realization of parallel simulation based on combat organization is analyzed theoretically. Furthermore, a parallel simulation based on combat organization is proposed. One by one, the methods of the simulation task partitioning, the simulation task integration and interaction between integration method are given. This paper breaks through the key technology of parallel simulation, based on the parallel simulation integration framework, implements the system integration, builds the parallel simulation prototype system of the size of the brigade, develops parallel simulation task allocation software, designs the operational application case, and tests parallel …
Modeling And Simulation Of Complex Equipment Health Management System Based On Cloud Computing,
2019
1. School of Mechanical Engineering, Shenyang University, Shenyang 110044, China; ;2. School of Mechanical and Automation, Northeastern University, Shenyang 110819, China;
Modeling And Simulation Of Complex Equipment Health Management System Based On Cloud Computing, Tianrui Zhang, Chuansheng Qu, Baoku Wu, Jianan Xu
Journal of System Simulation
Abstract: For complex equipment operation safely, the health management problems of complex equipment life cycle is analyzed. In order to realize remote service, complex equipment health management mode based on cloud computing is proposed. Aiming at the accuracy problem in the process of extracting and recognizing complex equipment characteristic data, the feature knowledge acquisition method based on ontology is researched, and the expression and acquisition algorithm of state characteristic knowledge is proposed. A task sequencing algorithm faults based on fuzzy comprehensive evaluation method is proposed, an appropriate task assignment model is selected for scheduling health management technicians. …
Research On Eye Location And Head State Detection Based On Integrated Learning,
2019
School of Automation Beijing Information Science and Technology University, Beijing 100192, China;
Research On Eye Location And Head State Detection Based On Integrated Learning, Yingnian Wu, Mengjia He, Xiang Wei
Journal of System Simulation
Abstract: For real-time detection of eye location problem, a real-time detection system of human eye based on Viola Jones algorithm is designed. Through the MATLAB, the real-time reading and positioning of the detected human eye pictures are controlled by the external or webcam. Through side view, top view, and upward view, it is shown that the human eye real-time positioning system has good detection effect and robustness. In view of the poor classification effect of small data sets on the head state, the random forest algorithm is used to classify the pitching Angle and yaw Angle by HOG-LBP fusion feature …
Dynamic Collision Optimization Algorithm Based On Ray Detection,
2019
1. School of Computer Science and Engineering, Xi'an Technological University, Xi'an 710025, China; ;
Dynamic Collision Optimization Algorithm Based On Ray Detection, Li Xing, Yanfang Fu, Wang Liang, Chengtao Lu
Journal of System Simulation
Abstract: Aiming at the inaccurate collision detection problem in Unity 3D-based visual simulation systems, a dynamic collision optimization algorithm based on ray detection is designed and implemented. The 3D virtual scene is segmented by octree, which simplifies the detection range of obstacles during the operation of simulation systems. At the same time, based on ray detection, according to the quantization coefficient and distance of the threat degree of obstacles, an appropriate collision collider is dynamically added to the obstacles to complete collision detection. The results show that the algorithm not only improves the fluency of visual simulation systems but also …
Design Of Universal Control Load System Of Helicopter Flight Simulator,
2019
1. Training Department of Bomber and Transport Aircraft Pilots, 93199 Troops, Harbin 150001, China; ;
Design Of Universal Control Load System Of Helicopter Flight Simulator, Chen Zhen, Haikuan Yang, Jiang Nan, Yuancheng Wang, Tianjiao Jiang
Journal of System Simulation
Abstract: To improve the universality and handling quality of control system of helicopter flight simulator, a universal control load system of helicopter flight simulator suitable for helicopter flight simulator is designed. The dynamic feedback model is proposed to solve the contradiction between control rigidity and stability, control precision and response frequency, the control rigidity and kinematic accuracy are improved.The operating load mechanism is designed, the system structure and drive system are simplified, the smoothness of force perception is improved; the third order smoothing algorithm and fieldbus technology based on EtherCAT are applied to improve the anti-jamming capability and response speed, …
Agent Based Modeling And Simulation Analysis Of Low-Orbit Early-Warning Satellites,
2019
China Academy of Launch Vehicle Technology Research and Development Department, Beijing 100076, China;
Agent Based Modeling And Simulation Analysis Of Low-Orbit Early-Warning Satellites, Liu Wen, Xiaolu Wang, Hongsheng Wang, Zhang Heng, Changqing Wang
Journal of System Simulation
Abstract: Low-Orbit Early-Warning Satellite has accurate midcourse ballistic missile tracking and surveillance capability. The paper takes Space Tracking and Surveillance System’s function and construction as the research subject. System model is constructed based on Agent method. The possible constellation configurations of STSS are analyzed considering the coverage performance,and the detection capability of ballistic missile target is simulated and analyzed. Simulation analysis of target detection is carried out. The result shows that STSS can effectively detect a certain number of targets, but detecting capability is affected severely by solar illumination.
Simulation Of Vehicle Startup Delay At Green Light And Its Direct And Chain-Reaction Impact On Traffic Flow,
2019
School of Civil Engineering, Tsinghua University, Beijing 100084, China;
Simulation Of Vehicle Startup Delay At Green Light And Its Direct And Chain-Reaction Impact On Traffic Flow, Longxi Luo, Lijun Xie, Jianping Wu, Xu Ming
Journal of System Simulation
Abstract: In current traffic simulations, it is implicitly assumed vehicles are driven by ideal drivers. Therefore, simulated vehicles make the most reasonable decisions such as moving out immediately when traffic lights turn green, resulting in a gap between simulations and real traffics. Research shows that drivers, including those who follow the rules, show a delay in starting-up their vehicles at the green light. The vehicle startup delay (SUD) is even more significant for drivers by things such as cell phones during waiting. However, the SUD has rarely been considered in simulations. The SUD is simulated to study its impacts on …
