Dentistry Commons^™

Oral And Dental Health In Systemic Sclerosis: Is It A Window To Other Systemic Affections?, Omnia A Abubakr, Taghreed F M M Mostafa, Mohamed A Hamdy

Journal of Medicine in Scientific Research

Background: Oral and periodontal manifestations are common in systemic sclerosis (SSc) which may result in poor nutritional status and significant morbidity. Better understanding of these manifestations is crucial for better patient outcomes. We aimed to evaluate dental and oral manifestations in patients with SSc in comparison to healthy control and to study the relationship between these findings and systemic sclerosis disease activity index, skin thickness, other systemic affection, as well as the oral health-related quality of life in these patients Patients and Methods: 50 patients with SSc were included in this case-control study (Group A) and 50 apparently healthy controls …

Effect Of Alkaline Water In Controlling Oral Ph, Duc M. Nguyen

Dental Hygiene ETDs

This study was motivated by the widespread prevalence of dental caries, acknowledged as a global concern and often deemed a pandemic, coupled with the realization of limitations in existing caries prevention methods. The surge in the popularity of alkaline water for daily use, recognized for its health benefits, prompted an exploration of its potential role in averting dental caries. The central hypothesis, focusing on the remineralization benefits of alkaline water as a preventive method for dental caries, formed the basis of investigation. Structured with two phases and five steps, the study aimed to evaluate the impact of alkaline water on …

Effectiveness Of Full Pulpotomy Compared With Root Canal Treatment In Managing Teeth With Signs And Symptoms Indicative Of Irreversible Pulpitis: A Protocol For Prospective Meta-Analysis Of Individual Participant Data Of Linked Randomised Clinical Trials (Prove), Shehabeldin Mohamed Saber Prof.Dr.

Dentistry

Background: Full pulpotomy has been proposed as an alternative to root canal treatment in teeth with signs and symptoms indicative of irreversible pulpitis (IRP), but the evidence is limited, relying on underpowered studies with a high risk of bias. The aim of this study is to conduct a prospective meta-analysis (PMA) of individual participant data of a series of individual randomised trials to provide robust evidence on the clinical and cost-effectiveness of pulpotomy compared with root canal treatment. Methods: Individual participant data will be obtained from a series of randomised trials designed and conducted by a consortium of multi-national investigators …

Anatomical Analysis Of Inferior Alveolar Nerve Relation To Mandibular Posterior Teeth Using Cone Beam Computed Tomography: A Retrospective Radiographic Analysis Study, Shehabeldin Mohamed Saber Prof.Dr.

Dentistry

Introduction: Cone beam computed tomography (CBCT) is reliable in the assessment of structures related to teeth. The assessment of the inferior alveolar neurovascular (IAN) bundle location using CBCT is considered one of its prime uses in different mandibular surgeries. Methodology: Retrospective CBCT data of patients presented to the institute were assessed to measure relations of IAN. Measurements were taken to assess the bone thickness adjacent to IAN, the superior-inferior dimension between the canal and the teeth, and the dimension between the canal and the inferior border of the mandible. Results: Out of the 170 patients the root apices nearest to …

Impact Of Angle Of File Access And Location Of Canal Curvature On The Dynamic Cyclic Fatigue Of Nickel Titanium Rotary Instruments, Shehabeldin Mohamed Saber Prof.Dr.

Dentistry

Objective: To evaluate the impact of different file access angles and root canal curvature’s location on the fatigue failure of One Curve (OC) and E3 Azure (EZ) NiTi files using a dynamic model at simulated body temperature. Methods: Eighty new instruments with similar tip sizes and taper (#25/0.06) from two NiTi rotary systems, One Curve and E3 Azure, were tested at simulated body temperatures (37°C) using a custom-made dynamic cyclic fatigue device. Instruments were divided into four subgroups according to the location of root canal curvature (a coronal curve 5 mm from the root canal orifice and an apical curve …

Physicochemical Properties Of Ah Plus Bioceramic Sealer, Bio-C Sealer, And Adseal Root Canal Sealer, Shehabeldin Mohamed Saber Prof.Dr.

Dentistry

Background: The aim of this study was to evaluate the physicochemical properties of two newly introduced premixed calcium silicate-based root canal sealers (AH Plus Bioceramic Sealer and Bio-C Sealer) compared to a resin-based root canal sealer (ADseal root canal sealer). Methods: Solubility, pH analysis, calcium ion release, and film thickness of each sealer were evaluated following ISO guidelines. The data were examined using the two-way ANOVA test. Furthermore, X-ray diffraction (XRD) examination was performed to investigate the crystalline phase of each type of sealer. X-ray fluorescence (XRF) analysis was done for the chemical elemental analysis of each sealer. Results: The …

Two-Year Clinical Performance Of Indirect Restorations Fabricated From Cad/Cam Nano Hybrid Composite Versus Lithium Disilicate In Mutilated Vital Teeth. A Randomized Controlled Trial, Shehabeldin Mohamed Saber Prof.Dr.

Dentistry

Trial design: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. The aim of this trial was to compare the two-year clinical performance of partial indirect restorations fabricated from CAD/CAM nano-hybrid composite and ceramic lithium disilicate blocks using the modified USPHS criteria. Methods: In two parallel groups (n = 50 restorations), fifty participants having mutilated vital teeth with a minimum of two remaining walls were randomly enrolled in this trial and received indirect restorations of either nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland) or Lithium Disilicate (IPS Emax CAD). The restorations were assessed …

Comparison Of Different Dental Restorative Materials On Orthodontic Brackets Performance In Class V Lesions. (In Vitro Study), Shadwa Kabil, Mohamed Mostafa Zayed, Shaimaa Rhoym

Dentistry

No abstract provided.

Adaptation Of Conventional Versus Digitally Fabricated Auricular Prosthesis: A Randomized Clinical Trial, Sara Fikry, Fatma Mohei El Mogei Dr, Mohamed El Khashab Prof, Amal Rekabi Prof

Dentistry

Aim: This study aimed to compare digitally fabricated auricular prostheses to conventional prostheses, regarding adaptation to defect site in patients with auricular defects.

Subjects and methods: Fifteen patients were recruited for auricular prosthetic reconstruction. Endosseous implants were placed, then patients were assigned into two groups. In control group, ear models were processed on stone cast obtained from conventional impression. In intervention group, computed tomography and optical scanning were combined to obtain a virtual model with digital analogues over which ear models were designed and printed. Ear models of both groups were seated, and adaptation was measured on the patient using …

Comorbidities And Final Outcome Of Post Covid-19 Associated Oral Mucormycosis Patients: A Cross-Sectional Study, Dalia Ghalwash, Asmaa Abou-Bakr, Ayman El-Gawish

Dentistry

Background

Mucormycosis is an invasive and possibly fatal fungal infection that frequently affects the mouth. Co-infection in post COVID-19 patients is an emerging concern, owing to their complex nature and higher mortality. Therefore, this study aimed to report the underlying risk factors, clinical characteristics, presentation, and final outcome of COVID-19 associated oral mucormycosis cases.

Results

This study included 51 patients with oral mucormycosis 28 (55%) males and 23 (45%) females. Twenty-three patients (45%) presented with deep necrotic ulcer, 16 patients (31%) presented with superficial ulcer, and 12 patients (23%) of them presented with fistula. The overall survival rate was 51% …

Evaluation Of Different Approaches For Management Of Separated Endodontic Instruments. (In-Vitro Study), Engy M. Kataia Professor, Hala Fayek Ass. Professor, Osama Ahmed El-Karamany

Dentistry

Objective: to evaluate different approaches (ultrasonic troughing, and trephine bur

with extractors) to manage separated endodontic instruments.

Methods and Materials: A block of wax containing mandibular molars were

scanned to get preoperative CBCT to select a total number of 32 mandibular molars

that were later divided into two groups (n=16) according to file retrieval procedure:

Group (A) (control group): the broken segment was retrieved by ET-25 ultrasonic

tips, Group (B): the broken segment was retrieved by micro-extractor (Zumax

retrieval kit). Traditional endodontic access cavity was created, orifice opener was

used to make coronal third enlargement up to 4mm of …

Build Angle Effect On 3d-Printed Dental Crowns Marginal Fit Using Digital Lightprocessing And Stereo-Lithography Technology: An In Vitro Study, Ahmed Sabet

Dentistry

Background The effect of 3D printing technology and build angle on the marginal fit of printed crowns is unclear. The objective of this research was to use digital light processing (DLP) and stereo-lithography (SLA)-based 3D printing to construct single restorations with varied build angles and to analyze the crowns′ marginal fit. Methods A prepared resin first molar was scanned utilizing an optical scanner. Three build orientations were used to construct the specimens: 0, 45, and 90º. DLP and SLA technology were used to produce the casting patterns. A digital microscope was used to measure the marginal gaps. The effect of …

Mangement Of Hypomineralized Anterior Teeth In Children And Adults, Shadwa Kabil, Sarah M.S. Khalil

Dentistry

No abstract provided.

Evaluation Of The Efficiency Of Passive Self-Ligating Versus Conventional Brackets In The Alignment Of Mandibular Crowded Teeth (A Comparative Study), Noha Ibrahim Abdelrahman Professor

Dentistry

Aim: Is to compare the efficiency of passive self-ligating versus conventional brackets in the alignment of crowded mandibular teeth. Materials and methods: A randomized clinical trial with Fifty participants visiting the clinic of the Orthodontic Department and fulfilling the eligibility criteria were enrolled in the study. Patients were randomly allocated to group A (Conventional brackets) or group B (Damon Q metal passive self-ligating brackets). The amount of mandibular crowding was assessed by Little’s irregularity index. Subjects in both groups were recalled for follow-up every four weeks till completion of alignment. Results: There was no significant difference in baseline irregularity in …

Invitro Evaluation Of Forces Delivered By Aligners Fabricated Using Positive Air Pressure Versus Negative Air Pressure., Islam Tarek Abbas Hassan Ahmed Prof, Nada Hamed, Dina Elghoul, Ahmed Zaki, Iman El-Abbasy

Dentistry

No abstract provided.

The Importance Of Family Oral Health Education In Promoting Children's Oral Health, Denise C. Mckinney, Melissa Sullivan

Dental Hygiene Faculty Publications

No abstract provided.

Student Productivity Log: An Innovative Approach To Managing Clinic Sessions With No Patient, Tara L. Newcomb, Jessica Suedbeck, Lauren Eusner, Amber W. Hunt

Dental Hygiene Faculty Publications

No abstract provided.

A Pthrp Gradient Drives Mandibular Condylar Chondrogenesis Via Runx2, C Tsutsumi-Arai, Y Arai, A Tran, M Salinas, Y Nakai, S Orikasa, W Ono, N Ono

Faculty, Staff and Student Publications

The mandibular condylar cartilage (MCC) is an essential component of the temporomandibular joint, which orchestrates the vertical growth of the mandibular ramus through endochondral ossification with distinctive modes of cell differentiation. Parathyroid hormone–related protein (PTHrP) is a master regulator of chondrogenesis; in the long bone epiphyseal growth plate, PTHrP expressed by resting zone chondrocytes promotes chondrocyte proliferation in the adjacent layer. However, how PTHrP regulates chondrogenesis in the MCC remains largely unclear. In this study, we used a Pthrp-mCherry knock-in reporter strain to map the localization of PTHrP+ cells in the MCC and define the function of PTHrP in the …

Infant Molds For Cleft Deformities, Hannah Brunow, Drew Reinbolt, Rhonda Troyer, Christian Miller

Williams Honors College, Honors Research Projects

Cleft lip and palate are very common birth defects where the roof of a baby's mouth and lip do not form properly while in the womb. Babies born with cleft lip or palate can undergo surgery after going through a process to make the initial gap smaller through incrementally smaller, retainer-like appliances. We will be trying to find a way to improve the pre-surgery process by implementing 3D printing. We will be performing this research for a craniofacial orthodontist at Akron Children's Hospital. We hope that our success will lead to a decrease in the amount of time spent making …

Outcomes Of Anterior Crossbite Correction On Alveolar Bone Morphology In Patients With Cleft Lip And Palate, Katherine J. Hayes

Theses and Dissertations

Objective: To determine if patients with cleft lip and/or cleft palate (CLP) with dental correction of the anterior crossbite during growth display differences in alveolar bone thickness around the maxillary central incisors compared to patients without crossbite correction.

Methods: This retrospective study evaluated post-treatment cone beam computed tomography (CBCT) images of growing patients with CLP with anterior crossbites who underwent Phase I orthodontic treatment (n=32). CBCTs were sorted by whether the crossbite was corrected (n=16) or not corrected (n=16) during Phase I. Alveolar bone thickness was measured on the buccal and palatal aspects of the central incisors at 3 mm, …