Orthodontics and Orthodontology Commons^™

Cortical Bone Thickness For Potential Anchorage Placement In Unilateral Cleft Lip And Palate Patients, Supeepan Boonyarattanasoontorn, Prajak Jariyapongpaiboon

Taiwanese Journal of Orthodontics

Purpose: The aim of this study was to measure the cortical bone thickness of the infrazygomatic crest area in individuals with non-syndromic unilateral cleft lip and palate (UCLP) with maxillary expansion using cone-beam computed tomography (CBCT). Materials and Methods: CBCT scans were obtained from 12 Thai non-syndromic UCLP patients with an average age of 14 years. Five horizontal and 8 vertical reference planes were drawn at the infrazygomatic crest area, and the cortical bone thickness was measured at 40 intersection points on the cleft and non-cleft sides. Results: The mean cortical bone thickness of the 40 measured points was 1.25 …

Evaluation Of Upper 1st Molar Rotation During Maxillary Canine Retraction In 1st Premolar Extraction Cases At 6 Weeks Reactivation Interval. A Clinical Trial., Rodayna A. Elbadawy, Kareem Elazab, Amr R. El-Beialy, Hend Salah

Future Dental Journal

Abstract:

Purpose: the aim of this clinical trial is to investigate maxillary first molar rotation during maxillary canine retraction at 6 weeks re-activation intervals with elastic power chain in first premolar extraction cases. Material and methods: a total of 20 quadrants of 10 orthodontic patients requiring maxillary canine retraction after extraction of upper 1^st premolars were recruited. Mini-screws (TADs) were used directly for maximum anchorage. Canines were retracted on 0.016×0.022-inch stainless steel arch wire using elastic power chain extending from a power arm on canine bracket to the miniscrew. Cone beam computed tomography (CBCT) was used to measure the …

Comparison Of Alignment Duration Between 0.018” And 0.022” Slot Brackets In Non-Extraction Orthodontic Adult Patients: (A Randomized Clinical Study), Omar Hazem Abouwafia, Hala Munir Abdel Majeed, Mona Salah Fayed, Nouran Fouad Seif-Eldin

Future Dental Journal

Abstract:

Introduction: Orthodontist tend to use one of the 2 bracket slot sizes available either the 0.018” or 0.022” bracket slot. Till now there is no reliable scientific evidence that indicates if any of them has a superior effect on the duration of teeth alignment. The aim of this study is to compare alignment duration between 0.018 and 0.022-inch bracket slot systems.

Subjects and methods: 14 Eligible participants having an age range of 14-22 years were randomly allocated to 2 groups (7 in each group). Group I: 0.018-inch and Group II: 0.022-inch slot (American orthodontics Mini master Roth prescription …

Effects Of Full-Time Versus Part-Time Clear Aligner Wear On Periodontal Health, Pain And Compliance In Orthodontic Patients, Mohamed Adel Afify, Ahmed Medhat Eltimamy, Fouad A. El Sharaby, Hala Monir Abdelmajeed

Future Dental Journal

INTRODUCTION: Clear aligner treatment's main drawback is that the patient decides how long to wear them each day. For clear aligner therapy to be successful, compliance is essential. A poor treatment outcome would arise from noncompliant patients.

METHODS: The study was a randomized clinical trial of 2 parallel groups (7 patients per group) who underwent clear aligner orthodontic treatment having an age range of 17-24 years. A part-time group wore the aligners for 16 hours per day and a full-time group wore the aligners for 22 hours per day. The study investigated the first eight aligners of the treatment. Compliance …

Comparison Between Orthodontic Measurements Taken From Cone-Beam Computed Tomography (Cbct) And Digital Models After Enmasse Retraction In Orthodontic Patients With Maxillary Protrusion., Amr M. Attia, Amr R. El-Beialy, Heba M. Dehis, Yehya A. Moustafa

Future Dental Journal

ABSTRACT

Objectives: This study aimed to evaluate the accuracy and reliability in measuring anchorage loss, molar rotation, and total amount of retraction using cone beam computed tomography (CBCT) and to compare them with the same measurements obtained using digitally scanned dental models. Materials and methods: 24 patients requiring comprehensive orthodontic treatment including extraction of 1st premolars with maximum anchorage using enmasse retraction. CBCTs were undertaken on the same 24 patients using InVivoDental software for measurement. The digital cast was made using alginate impressions, from which virtual 3D models will be created and measured using 3Shape analyzer software. Orthodontic measurements will …

Measuring Accuracy Of Dolphin Imaging Software In Predicting Upper Jaw Soft Tissue Profile Changes In Class Ii Adult Patients Treated With Extraction Versus Non-Extraction., Amr Amin Arif, Esam Nasef, Amira Aboalnaga

Future Dental Journal

Abstract

Objective: To assess the accuracy of Dolphin Imaging software in predicting upper jaw profile changes in class II patients treated by extraction and non-extraction.

Methods: The records of 60 Class II div 1 patients were selected; 30 patients treated by extraction of upper first premolar and 30 patients treated by non-extraction. The Pre- and post-treatment lateral cephalometric x-rays of each patient were traced using Dolphin software. The actual hard tissue changes due to treatment were calculated and installed into the prediction module to generate the predicted profile. The soft tissue measurements of the actual post-treatment and predicted profiles were …

Contents Of Vol. 31, No.1, April 2024, Yuniardini Septorini Wimardhani

Journal of Dentistry Indonesia

This is the Cover and the Contents of the Vol. 31 No. 1 2024

Early Intervention Within Orthodontics: The Sociological Aspects, Trenton Hammond

Honors Program: Senior Projects (Public)

Orthodontic treatment is one of the final phases of dental treatment. Its use is to provide aesthetics in some cases, yet the quality-of-life aspect that it can provide is greatly underestimated. Orthodontic care can provide proper function of teeth, improve facial structure, avoid tooth decay/loss, and improve gum health (AAO, 2024). Within this research the overarching goal is to understand the sociological aspects of families looking to start orthodontic care, what the reasons behind starting or not starting are, and providing information to the public about orthodontics that may be misunderstood or might push people away from searching for orthodontic …

Knowledge, Attitude And Clinical Management Of Orthodontically-Induced External Root Resorption Among Lebanese Orthodontists, Diana Chehab Fakih, Ahmad Tarabaih, Aly Osman

International Arab Journal of Dentistry

Objective: The aim of this study was to assess the knowledge, attitude, and clinical management orthodontically induced external root resorption (OIERR) among Lebanese orthodontists of varying years of experience.

Methods: An online validated survey of 22 questions regarding OIERR was done among a randomly selected registered sample of 145 male and female Lebanese orthodontists.

Results: Significant differences were found among orthodontists with different years of experience for: the factors leading to further investigation, the stage at which additional screening measures were taken, the periodic follow up assessment method, and the clinical management in case of generalized root …

Effect Of Taper And Pitch On Nickle-Titanium File With Variable Cross Section To Its Cyclic Fatigue (In Silico Study), Yustika Chrysandra, Tunjung Nugraheni, Wignyo Hadriyanto

Journal of Dentistry Indonesia

The geometric design of an endodontic file includes cross-sectional shape, taper, and pitch. NiTi endodontic files of OneCurve (MicroMega) are made of two variations of cross-sectional shape, that is, double-s shaped and triple helix. Various kinds of modifications were made to increase the resistance of the NiTi endodontic files from fracture. Cyclic fatigue is the most common factor that causes a fracture of the endodontic file. Objective: The purpose of this study was to obtain a NiTi endodontic file design that has the best cyclic resistance value based on its taper size and number of pitch. Methods: This …

Epidemiology Of Bruxism And Temporomandibular Joint Disorders (Tmd) In Iranian Adults: A Cross-Sectional Study, Parviz Amini, Maryam Sharifi, Reyhane Aftabi, Fatemeh Jahanimoghadam, Hamidreza Jahanimoghadam

Journal of Dentistry Indonesia

Objective: The prevalence of bruxism in the literature has been reported differently. The aim of this study was to assess the prevalence of bruxism in patients aged 25–40 who were referred to Kerman Dental School. Methods: This analytical descriptive cross-sectional study was performed on 320 patients referred to the Department of Oral Medicine of Kerman Dentistry Faculty in the age range of 25 to 40 years old. The prevalence of bruxism as well as TMJ disorders were evaluated. Data were collected in a questionnaire and entered into SPSS version 24. Analyzing was done by a chi-square test at …

Quality Of Life In Orthodontics, Claudia Eisenhuth, Gabriel Eisenhuth, Connor Schwartz, Amir Mohajeri, Man Hung, Tiffany Nelson, Ryann Glenn

Annual Research Symposium

Orthodontic treatment goes beyond mere cosmetic enhancement; it significantly impacts various aspects of an individual's quality of life. Beyond the physical benefits of improved oral function and prevention of dental issues, orthodontics also yields profound psychological benefits. Aligned teeth enhance self-confidence, reduce social anxiety, and contribute to better relationships and professional opportunities. Moreover, addressing dental concerns through orthodontic treatment reduces psychological distress and promotes overall happiness and satisfaction. Real-life case studies vividly illustrate the transformative effects of orthodontic interventions, emphasizing the importance of considering quality of life outcomes in dental care.

Successful Orthodontic Treatment Of Bimaxillary Protrusion Case With An Ankylosed Incisor—A Case Report And Decision-Making Process, Shu-Cheng Lin, Szu-Ching Lee, Yi-Ching Ho, Kai-Hsiang Chuang, Tzu-Ying Wu

Taiwanese Journal of Orthodontics

The treatment of ankylosed incisor is challenging for orthodontists, necessitating accurate diagnosis, well-considered treatment planning, and close collaboration among interdisciplinary teams to achieve favorable esthetic and periodontal outcomes. For ankylosed cases, accurate diagnosis depends on detailed clinical examination and 3D radiographic images. This case report described the treatment of a bimaxillary protrusive female with an ankylosed maxillary left central incisor. The decision regarding treatment was based on the severity of dental ankylosis and replacement root resorption. Each treatment plan comes with its own set of advantages and disadvantages. In this case, the decoronation treatment plan and prosthesis was implemented, resulting …

Orthodontic And Surgical Treatment Of A Patient With Cleidocranial Dysplasia Syndrome: Introducing A New Appliance For Traction Of Multiple Impacted Teeth, Sanaz Soheilifar, Sepideh Soheilifar, Sara Soheilifar, Navid Naghdi

Taiwanese Journal of Orthodontics

Cleidocranial Dysplasia (CCD) is a syndrome that causes skeletal growth disturbances. The impaction of many permanent teeth and several supernumerary teeth are among the dental problems of patients with this syndrome. This patient was a 14 y/o girl with CCD syndrome. She was skeletal Cl III with reverse overjet; many impacted teeth, and several supernumerary teeth. Orthodontic treatment was done in two stages. In the first stage, supernumerary anterior teeth were extracted, and the impacted teeth were exposed for traction. In the second stage, posterior supernumerary teeth were removed, and upper canines and posterior impacted teeth were exposed for forced …

A Coronectomy And Orthodontic Protraction Of An Impacted Lower Third Molar Compressed To The Inferior Alveolar Nerve: A Case Report, Johnson Hsin-Chung Cheng, Daniel De-Shing Chen, Bou-Yue Peng, Pei-Hsuan Chen

Taiwanese Journal of Orthodontics

Background: Neurological damage may occur during a third molar extraction procedure when the tooth root is near the mandibular canal. Although the incidence of this complication is low, a great range of variability has been reported in the literature. Several methods to reduce or eliminate this complication have been proposed, such as orthodontic-assisted extraction, extraction of the second molar, or an intentional odontectomy. Objective: The objective of this case report is to present a low risk extraction procedure: a coronectomy with forced eruption (COFE) to avoid potential neural damage when removal of lower wisdom tooth compressing inferior alveolar nerve in …

Non-Extraction Orthodontics In Severe Open Bite With Disc Plication Surgery Of The Temporomandibular Joint, Jessica Chia-Yi Wang, Meng-Yen Chen, Kuan-Yu Lin, Tung-Yiu Wong, Chen-Jung Chang

Taiwanese Journal of Orthodontics

Open bite malocclusion is among the most challenging orthodontic deformities to correct. Among the etiological factors of anterior open-bite, degenerative change in temporomandibular joints (TMJs) is the most difficult condition to manage. The most appropriate treatment modality for TMJ disorder with disc displacement remains controversal. Disc repositioning surgery is a treatment option when conservative treatment has failed to resolve symptoms. We presented a patient had history of gradual bite opening associated with joint stiffness and clicking. She received occlusal splint therapy for more than 10 years, and the occlusion was stable for 1 year before orthodontic treatment was initiated. Based …

Correlation Of Symphyseal Angle And Various Skeletal Patterns In Skeletal Class I Malocclusion, Dipankar Shrestha, Jyoti Dhakal, Rabindra Man Shrestha, Asal Acharya, Utsav Gautam

Taiwanese Journal of Orthodontics

Introduction: Skeletal growth pattern is an important parameter used in orthodontics for diagnosis and treatment planning. Lateral cephalogram is commonly used to evaluate skeletal growth pattern. Orthopantamogram (OPG) can also be used to evaluate skeletal growth pattern with parameters like gonial angle and symphyseal angle (SA). This study deals with symphyseal angle and its correlation with skeletal growth patterns. Objective: To correlate symphyseal angle with different skeletal growth patterns in skeletal Class I sample. Materials and Methods: The study was a cross-sectional, observational study including 60 patients of age 15 - 49 years with skeletal Class I pattern selected from …

Surface Modifications Of Orthodontic Bone Screws - A Novel Approach, Sai Kalyan Menta Dr, Ravi M. S

Annual Research Symposium

Anchorage control plays a key role in the correction of malocclusion. With the advent of orthodontic bone screws, attaining absolute anchorage control has become hassle free. They have the advantages of low cost, simple surgical placement, and ease of removal; therefore, they are convenient in the treatment of various malocclusions. Although the clinical stability of bone screws is exceptionally high, stability of the bone screws is compromised by factors such as microbial contamination and morphological defects. To overcome this, surface modifications are introduced to enhance the stability of the bone screws.

Unlocking The Secrets Of Stem Cells In Orthodontics, Ravi M. S

Annual Research Symposium

Human Periodontal Ligament Stem Cells (hPDLSCs) have immense potential for use in tissue regeneration and angiogenesis. These cells are influenced by mechanical forces, particularly in orthodontic applications. Understanding how mechanical stress modulates stem cell behavior is essential for optimizing therapeutic strategies.

Evaluation Of Oropharyngeal Airway Changes In Skeletal Class11 Patients Undergoing Twin Block Appliance Therapy, K Saidath

Annual Research Symposium

The study investigated the changes in oropharyngeal airway dimensions in growing patients with retrognthic mandible and skeletal class 11 paterns, treated with twin block appliance.we evaluated skeletal changes post treatment and their relation to airway alterations