Chemistry Commons^™

Photocontrolled Degradation Of Stimuli-Responsive Poly(Ethyl Glyoxylate): Differentiating Features And Traceless Ambient Depolymerization, Bo Fan, John Trant, Rebecca Yardley, Andrew Pickering, Francois Lagugne-Labarthet, Elizabeth Gillies

Chemistry Publications

The depolymerization of coatings prepared from a 6-nitroveratryl carbonate end-capped poly(ethyl glyoxylate) (PEtG) self-immolative polymer was studied. This polymer undergoes end-to-end depolymerization following cleavage of the end-cap by UV light. Several important fundamental diff erences between this class of polymers and conventional degradable polymers were revealed. For example, polymer backbone cleavage and depolymerization exhibited different dependencies on pH, emphasizing the decoupling of these processes. Probing of the coating erosion mechanism illustrated an interesting combination of features from surface erosion and bulk degradation mechanisms that arise from the end-to-end depolymerization mechanism and further differentiate these polymers from convention degradable polymers. It …

Relating Side Chain Organization Of Pnipam With Its Conformation In Aqueous Methanol, Debashish Mukherji, Manfred Wagner, Mark D. Watson, Svenja Winzen, Tiago E. E. De Oliveira, Carlos M. Marques, Kurt Kremer

Chemistry Faculty Publications

Combining nuclear magnetic resonance (NMR), dynamic light scattering (DLS), and μs long all-atom simulations with two million particles, we establish a delicate correlation between increased side chain organization of PNIPAm and its collapse in aqueous methanol mixtures. We find that the preferential binding of methanol with PNIPAm side chains, bridging distal monomers along the polymer backbone, results in increased organization. Furthermore, methanol–PNIPAm preferential binding is dominated by hydrogen bonding. Our findings reveal that the collapse of PNIPAm is dominated by enthalpic interactions and that the standard poor solvent (entropic) effects play no major role.

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …

Fluorescent Conjugated Polymers With A Bodipy-Based Backbone And Uses Thereof, Haiying Liu

Michigan Tech Patents

The present invention provides various fluorescent conjugated polymers with a BODIPY-based backbone. The invention also provides methods of using the polymers of the invention, such as for imaging and detection of cells, tumors, bacteria and viruses.

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …

Correlation Of Polymer Performance And Hansen Solubility Parameters, Daniel Jobse Mania

Master's Theses

Ready-to-use (RTU) grout is becoming more important to the finish and remodeling construction industry. Market research shows it is a fast-growing product that not only is creating its own space, but is beginning to supplant existing technology.

The original intent of this research was to investigate formulation parameters and how they affect grout performance. It was learned that particle size and oil absorption (OA) value are important filler properties that affect performance as much as adequate packing density and optimal pigment volume concentration (PVC) without going beyond critical PVC (CPVC).

Polymer architecture was also determined to be extremely important, but …

Multipurpose Tenofovir Disoproxil Fumarate Electrospun Fibers For The Prevention Of Hiv-1 And Hsv-2 Infections., Kevin Tyo

Electronic Theses and Dissertations

Sexually transmitted infections affect hundreds of millions of worldwide. Both human immunodeficiency virus (HIV-1 and -2) and herpes simplex virus-2 (HSV-2) remain incurable, urging the development of new prevention strategies. While current prophylactic technologies are dependent on strict user adherence to achieve efficacy, there is a dearth of delivery vehicles that provide discreet and convenient administration, combined with prolonged-delivery of active agents. To address these needs, we created electrospun fibers (EFs) comprised of FDA-approved polymers, poly(lactic-co-glycolic acid) (PLGA) and poly(DL-lactide-co-ε-caprolactone) (PLCL), to provide sustained-release and in vitro protection against HIV-1 and HSV-2. PLGA and PLCL EFs, incorporating the antiretroviral, tenofovir …

Proximal Effects In Bimetallic Catalysts For Olefin Polymerization, In Cross Metathesis Of Poly(3-R-Cyclooctenes), And In Multiblock Polymers, Madalyn Radlauer, Theodor Agapie, Marc Hillmyer

Faculty Publications, Chemistry

Proximity and sterics play a large role in polymerization and polymer chemistry. In the development and testing of bimetallic polymerization catalysts where the two metal centers are held on the same side of the molecule by a rigid ligand framework, the proximity of the second metal changes reactivity at the first. The resulting enhancements of polar group tolerance or isoselecitivity in olefin polymerization are not observed in related bimetallic systems with distal metal centers or in monometallic analogues. In cross metathesis between poly(cyclooctene) chains, high E-stereoregularity and head-to-tail regioregularity are achieved with Grubbs second or third generation catalysts when there …

Electrospinning Of Polymeric Solutions Using Opuntia Ficus-Indica Mucilage And Iron Oxide For Nanofiber Membranes For Treating Arsenic Contaminated Water, Venkatesh Eppili

USF Tampa Graduate Theses and Dissertations

Water is the essential part of every organism and it is also a vital constituent of healthy living and diet. Unfortunately water contamination over the past decade has increased dramatically leading to various diseases. As technology advances, we are detecting many pollutants at smaller levels of concentrations. Arsenic (As) is one of those major pollutants, and Arsenic poisoning is a condition caused due to excess levels of arsenic in the body. The main basis for Arsenic poisoning is from ground water which naturally contains high concentrations of arsenic. A case study from 2007 states that over 137 million people in …

Synthesis, Properties, And Antibacterial Activity Of Polyphosphonium Semi-Interpenetrating Networks, Tyler John Cuthbert, Tristan Harrison, Paul J. Ragogna, Elizabeth Gillies

Chemistry Publications

The development of new approaches to antibacterial surfaces is of growing interest to combat the spread of harmful bacterial infections. Relative to polyammoniums, polyphosphoniums can exhibit enhanced chemical and thermal stability, but have not yet been widely explored for the preparation of antibacterial surfaces. In this work, polyphosphoniums of varying chain lengths were synthesized by reversible addition-fragmentation chain-transfer polymerization of 4-vinylbenzyl derivatives of triethyl, tributyl, and trioctylphosphonium. These polyphosphoniums were then incorporated into semi-interpenetrating networks (SIPNs) based on tetra(ethylene glycol) diacrylate (TEGDA) via a UV light-initiated curing process. Measurements of cure percentage, gel content, water contact angle, and surface charge …

An Investigation Into The Use Of Polymer Bound Boronic Acid For Glucose Detection In Paper Based Microfluidic Devices, Spencer A. Schultz

Master's Theses

Paper Based Microfluidic Devices (microPADs) are a new platform for point-of-care diagnostic assays for use in resource-limited settings. These devices rely typically on enzymatic assays to produce their results, which makes them susceptible to degradation when exposed to extreme environmental conditions such as high temperature. In order to overcome this limitation, this research project focused on investigating the use of polymers instead of enzymes to detect analytes on microPADs.

Polymer-bound boronic acid, a glucose and pH sensitive polymer, was incorporated into microPADs in order to develop a chronometric, paper-based glucose assay. The polymer was tested with both lateral and vertical …

Development And Characterization Of Reagent Pencils For Microfluidic Paper Based Analytical Devices, Cheyenne H. Liu

Master's Theses

Microfluidic paper based analytical devices (microPADs) are a novel platform for point of care (POC) diagnostics. Limitations of reagent shelf life have been overcome with the introduction of reagent pencils as a method for solid-based reagent deposition. While useful, little work has been reported on the characterization and optimization of reagent pencils. Herein, an investigation on reagent pencil composition and efficiency is conducted via colorimetric release profile tests utilizing an erioglaucine disodium salt that yields a quantifiable blue colored product in the presence of water. Within this work, an investigation on the molecular weight dependence, polymer chain end functionality, and …

Measuring Accuracy Of Two 3d Printing Materials, Mudassir Ali

Master of Technology Management Plan II Graduate Projects

Part accuracy is one of the important aspect in the manufacturing industry. The overall inaccuracy of the parts being built by RP technology has been one of the major challenges that need to be overcome. Though all the printing materials come with specifications, but the suppliers and manufactures does not specify the accuracy of the materials. In this study we established a study which compares the accuracy of the materials in consideration and performed an experiment to establish the superiority of a material in terms of accuracy over each other. The purpose of this project was to compare the dimensional …

Quantifying The Use Of Chloroform Vapor Exposure To Improve The Adhesion Of Au Thin Films Onto Pmma, Kathleen T. Krist

Senior Honors Projects, 2010-2019

The metallization of Au onto plastics is an important processing step in applications such as the aerospace and automotive industries, the field of microelectronics, and the fabrication of microfluidic devices. While its corrosion resistance and excellent electrical and thermal conductivity make Au a useful choice, its inertness results in poor adhesion to polymer surfaces. Previous studies have indicated that exposing commercially available poly(methyl methacrylate) (PMMA) sheets to chloroform vapor following Au deposition significantly improves adhesion. In this study, we utilized electron-beam evaporation and magnetron sputtering to deposit Au thin films onto 1.50 mm thick PMMA and exposed the samples to …

Surface And Interfacial Design And Control Of High Performing Thermoplastics: Polysulfones And Beyond, Katrina Marie Knauer

Dissertations

The study of a class of materials almost always begins with the development of an understanding of properties in the bulk state. However, it is the study of surface critical phenomena that has led to a number of new important insights into polymer behavior. A systematic understanding of physical properties in the immediate vicinity of surface and interfacial layers, which cannot be deduced by simple extrapolation of bulk properties, is of significant importance for advancements in polymer applications where the interface drives performance, such as in membranes, coatings, drug-delivery systems, medical devices, and composites.

First, the surface and interfacial modification …

Energy Management Mechanisms Employed At The Human-Material Interface Of Traditional And Minimalist Shod Running, Nadine M. Lippa

Dissertations

From recreational to elite athletes, greater than 50% of runners sustain overuse injuries each year, prompting substantial research efforts to identify causes of—and solutions to—the high injury rate. Different shoe types and material property degradation have been related to injury. Two popular footwear types are traditional shoes with thick graded soles and minimalist running footwear with thinner foam and/or non-graded soles. Notwithstanding 45 years of significant modifications to shoe design features, gained knowledge in kinesiology, and advanced technologies in polymer science, runner injury rates have not decreased and EVA foam has remained the primary running shoe midsole material since the …

Functionalizing Β-Cyano Oligo(P-Phenylene Vinylene) Chromophores For Use In Mechanochromic Materials, Alexander J. Wink

Honors Theses

Mechanochromic materials are materials that change color upon mechanical deformation. This concept can be applied in areas of quality control, since the knowledge of damaged parts will easily be detected due to a color change in the material that has undergone deformation. Typically these types of materials are enabled by employing functional small molecules. Often, these are conjugated organic molecules or chromophores, which fluoresce different colors determined by the stimulus (or lack thereof) acting upon the material. In this work, we explore a new avenue to elicit color changes in polymeric materials based on the process of restriction of intramolecular …

The Effect Of Acrylic Acid On Ring Formation In Polyacrylonitrile, Elisha Cade Willis

Honors Theses

The addition of comonomers into carbon fiber precursor, polyacrylonitrile (PAN), has shown to have effects on the extent of stabilization and thermal behavior.1 Acrylic Acid (AA) was added at varying initial apparent weight percent and added via semibatch reaction to copolymerize with acrylonitrile to form carbon fiber precursor. Accompanying batch reactions were synthesized for comparison. Degradation was found to be greater in the semibatch reactions although overall was comparable to the batch reactions. Differential scanning calorimetry (DSC) confirmed the addition of higher concentrations of AA into the reaction resulted in a less intense exotherm upon cyclization, along with a greater …

Synthesis Of Acceptors For Use In Donor-Acceptor Copolymers And Characterization Of These Polymers, William D. Walker

Honors Theses

In this thesis, a selenium-derivatized acceptor was synthesized to examine the heavy atom effects of selenium on the position of the frontier molecular orbitals (HOMO/LUMO band gap) as opposed to sulfur in a donor-acceptor copolymer for use in light harvesting and detection applications. Over the course of this research, standard operating protocols for ultraviolet-visible (UV-Vis-NIR) and Fourier transform infrared (FT-IR) spectroscopies, as well as cyclic voltammetry (CV) characterization techniques were established. Once synthesized, the polymers were characterized through use of the established characterization protocols. The selenium-derivatized polymer exhibited a bathochromic shift compared to the sulfur analogue, with a solid-state absorption …

Synthesis Of Microgel Polymers As Catalysts, Hannah N. Miller

Chemistry & Biochemistry Undergraduate Honors Theses

New developments in organic synthesis show promise in achieving the best catalytic properties for the hydrolysis of glycosidic bonds through microgel polymers and transition metal complexes. A monomer mix of ethylene glycol dimethacrylate, butyl acrylate, and styrene form miniemulsion polymers after sonication and exposure to UV light. Gravimetrical analysis is used to determine the most suitable polymerization conditions by performing experiments at varying pH values, temperatures, monomer amounts, initiator amounts, and lamp heights. The final data show that the best polymerization conditions are a pH of 10.50 at 0°C with a high monomer ratio, 20% initiator amount, and a lamp …

Using Intrinsic Properties Of Polyaniline To Sense Expression Of The Microrna Let-7, Jared N. Gloria

Honors Theses

MicroRNAs are approximately 22-nucleotide long RNA molecules that function through decay and translational repression of messenger RNA. The microRNA let-7 is found to play a role in maintaining the fate of differentiated cells in humans. Thus, expression level of this microRNA is a reliable biomarker of tumor cell phenotype. However, there are significant limitations in the current profiling techniques of microRNA. The current methods like northern blotting, microarrays, RT-PCR, or using locked nucleic acid (LNA) for in-situ hybridization are either laborious, semi-quantitative, or expensive. In this research we try to address this issue by developing a fast, specific, and inexpensive …

Curing Of Polymer Thermosets Via Click Reactions, Mark Richard Brei

Dissertations

In the first project, an azide functional resin and tetra propargyl aromatic diamines were fabricated for use as a composite matrix. These systems take already established epoxy/amine matrices and functionalize them with click moieties. This allows lower temperatures to be used in the production of a thermoset part. These new systems yield many better mechanical properties than their epoxy/amine derivatives, but their T_gs are low in comparison.

The second project investigates the characterization of a linear system based off of the above azide functional resin and a difunctional alkyne. Through selectively choosing catalyst the linear system can show …

Addressing The Issues Of Drug Delivery Via Advanced Macromolecular Design, Brooks Allen Abel

Dissertations

The work described in this dissertation focuses on the development of synthetic approaches toward novel polymer architectures that specifically address the issues of in vivo drug delivery. Successful implementation of the synthetic methodologies described herein required fundamental investigations into the underlying chemistries in ways that now provide greater insights into the nature of the these chemical reactions.

In Section I, the synthesis of tunable pH- and CO₂-responsive sulfonamide-containing polymers using reversible addition-fragmentation chain transfer (RAFT) polymerization is described. Initially, poor polymerization control of methacryloyl sulfonamide (MSA) monomers was observed using traditional RAFT polymerization conditions. Ultimately, reducing the polymerization …

Synthesis Of Two Monomers For Proton Exchange Membrane Fuel Cells (Pemfcs), Abdulmajeed A. Alayyaf

Electronic Theses and Dissertations

The overall goal of this research is to synthesize two different monomers for proton exchange membrane (PEM) Fuel Cells. Such monomers are proposed to be polymerized to improve the efficiency and compatibility of electrodes and electrolytes in PEM fuel cells.

The first target is to synthesize 4-diazonium-3-fluoro PFSI zwitterionic monomer. Three steps were carried out in the lab. First one was the ammonolysis of 3-fluoro-4-nitrobenzenesulfonyl chloride. Second reaction was the bromination of Nafion monomer. The next coupling reaction, between brominated Nafion monomer and the 3-fluoro-4-nitrobenzenesulfonamide, was failed. The obstacles involve the harsh reaction condition and troublesome purification procedure.

The second …

To Bend Or Not To Bend – Are Heteroatom Interactions Within Conjugated Molecules Effective In Dictating Conformation And Planarity?, Gary Conboy, Howard J. Spencer, Enrico Angioni, Alexander L. Kanibolotsky, Neil J. Findlay, Simon J. Coles, Claire Wilson, Mateusz B. Pitak, Chad Risko, Veaceslav Coropceanu, Jean-Luc Brédas, Peter J. Skabara

Chemistry Faculty Publications

We consider the roles of heteroatoms (mainly nitrogen, the halogens and the chalcogens) in dictating the conformation of linear conjugated molecules and polymers through non-covalent intramolecular interactions. Whilst hydrogen bonding is a competitive and sometimes more influential interaction, we provide unambiguous evidence that heteroatoms are able to determine the conformation of such materials with reasonable predictability.

Novel Non-Halogenated Flame Retardant Compounds, Austin Bailey, Charles J. Neef, Time Dawsey

Poster Presentations

Two different boron compounds, bis(tetramethylammonium) decaborate, TMAD, and bis (tetrabutylammonium) decaborate, TBAD were studied as potential replacements for halogenated flame retardants. Current commercially available, halogenated flame retardants are not environmentally friendly and release strong acids upon burning. TMAD and TBAD were combined with triphenylphosphine oxide and cast in polyurethane films at varying levels. These samples were then cut into strips and burned in a UL-94 flame chamber. These samples were also tested via TGA for degradation temperature. These varying levels were tested via several Design of Experiments constructed within Minitab software. Results thus far have shown the potential for these …

Modified Yttrium Hydroxide/Mc Nylon Nanocomposites And Scaling Effects In Multilayer Polyethylene Films, Jia Chen

USF Tampa Graduate Theses and Dissertations

In this thesis, monomer casting (MC) nylon was synthesized. MC nylon could replace nonferrous metals in certain applications, including gears, wheels, and other moving parts. However, compared with metals, MC nylon products have poor strength and stiffness, and crack easily, especially at low temperatures. In addition, the dimensional stability of MC nylon is poor, especially in the large casting nylon products, causing significant internal stresses due to shrinkage. Thus, MC nylon cracks easily when cast and molded. The yttrium hydroxide particles were modified by stearic acid and dispersed in the caprolactam. The polymerization time was short due to fast anionic …

Toward High Performance Nanocarbon Fibers, Michaela R. Pfau

Master's Theses

High performance carbon fibers (CFs) have been a commercially available since their commercial boom in the 1970s, and are generally produced via carbonization of poly (acrylonitrile) (PAN). More recently, carbon nanomaterials like graphene and carbon nanotubes (CNTs) have been discovered and have shown excellent mechanical, thermal, and electrical properties due to their sp² carbon repeating structure. Graphene and CNTs can both be organized into macroscopic fibers using a number of different techniques, resulting in fibers with promising mechanical performance that can be readily multifunctionalized. In some cases, the two materials have been combined, and the resulting hybrid fibers have …

Water Condensation And Protein Adsorption On Hybrid Superhydrophobic-Hydrophilic Surfaces, Bikash Mondal

Dissertations, Theses, and Capstone Projects

This thesis describes the study of protein adsorption and water condensation on hybrid superhydrophobic-hydrophilic surfaces for various technological applications such as diagnostics, artificial organs and medical devices, water collection, and heat transfer.

In the chapter 1, a general introduction to wetting theories, superhydrophobic surface, and hybrid surfaces is given. In chapter 2, design and fabrication of a hybrid superhydrophobic surface for studying dropwise condensation and heat transfer is discussed. Effect of surface chemistry and wettability on protein adsorption is discussed in the chapter 3. Finally, in chapter 4, the protein adsorption study on hybrid superhydrophobic surfaces made by 3D-printing and …

Synthesis And Characterization Of Segmented Fluorescent Conjugated Polymers Via Acyclic Diene Metathesis (Admet), Gagandeep Singh

Dissertations, Theses, and Capstone Projects

This doctoral thesis is focused on the novel and facile synthesis and characterization of segmented conjugated polymers featuring various electro-optically active segments, with or without heteroatom linkages. The polymers were synthesized, via acyclic diene metathesis (ADMET) using ruthenium-based Grubbs-type catalysts. All products are soluble, and have a well-defined all-trans microstructure without defects. Some of the polymers were also synthesized via Suzuki polycondensation for comparison purposes. All monomers utilized were designed and synthesized in the laboratory.

Segmented conjugated polymers have received a great deal of attention in organic electronics, such as organic light emitting-diodes, organic field-effect transistors and organic solar …