Chemistry Commons^™

Carbon Dioxide Capture Potential Of Chitosan-Nanocrystalline Cellulose Aerogel Composite Materials: Synthesis, Functionalization, And Characterization, Victor Oghenekohwo

Theses and Dissertations

The carbon dioxide capture technology has been established as an invaluable player in the current global efforts to allay the warming of the planet and climate change. In this connection, the study centers on the valorization of waste organic materials for the application described herein. The sorbents, sourced from a combination of by-products of food processing and agricultural residue waste products, viz. seafood waste and sugarcane bagasse, showed prospects for selective carbon dioxide capture, adsorbing up to 5.78 mg/g of the gas at 273 K and 2.82 mg/g at 298 K, as observed on the Micromeritic ASAP 2020 surface area …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Polyaniline-Derivatives Based On Poly (Heterocyclic Diphenylamine) With Improved Electrochemical Stability And Processability, Mohammed Noifa Almtiri

Theses and Dissertations

Today, smart innovation has become an essential part of human life; thus, contemporary technologies are always looking for intelligent, responsive, and efficient materials to satisfy these demands. Consequently, synthetic "metals" or, more precisely, intrinsically conducting polymers (CPs) have begun to find a place as valuable and practical materials for a new generation of devices. Amongst all intrinsic conducting polymers, polyaniline (PANI) has attracted significant attention due to its outstanding air and moisture stability, simple preparation technique, and high electrical conductivity (chapter I).

Chapter II represents the synthesis of a new PANI derivative that contains a phenoxazine unit co-polymerized with p-phenylenediamine …

A Modular Synthesis Of Processable And Thermally Stable Semi-Fluorinated Aryl Ether Polymers Via Step-Growth Polymerization Of Fluoroalkenes, Ketki Eknath Shelar

Theses and Dissertations

Tailored fluoropolymers remain the leading choice for a wide variety of advanced high-performance applications, including electronic/optical and energy conversion, owing to their unique blend of complementary high-performance properties. Amorphous semi-fluorinated polymers exhibit improved solubility and melt processability when compared to traditional perfluoropolymers. A leading class of semi-fluorinated aryl ether polymers includes perfluorocyclobutyl (PFCB), perfluorocycloalkenyl (PFCA), and fluoroarylene vinylene ether (FAVE) polymers. Monomers containing aromatic trifluorovinyl ethers (TFVE) are used to synthesize PFCB polymers via radical-mediated [2+2] cyclodimerization. On the other hand, FAVE and PFCA polymers are polymerized via base-mediated nucleophilic addition/elimination of bisphenols with TFVE monomers and decafluorocyclohexene respectively. The …

Step-Growth Polymerization Of Perfluoro-Vinyl Ether, -Cycloalkenes, And -Acyclic Alkenes With Bisphenols Containing Variable Polycyclic Aromatic Cores, Karl Mpumbwa Mukeba

Theses and Dissertations

This dissertation reports the synthesis and characterization of semi-fluorinated polymers derived from the polymerization of bisphenols with fluoroalkenes. A series of diverse bisphenols were chosen from popular commercial bisphenols and new polycyclic aromatic hydrocarbon (PAH) derived bisphenols requiring synthesis. Step-growth condensation polymerization of bisphenols with three different fluoroalkene types was performed while probing polymerization conditions and the structure/properties relationship of the resulting fluoropolymers. The fluoroalkene monomers were chosen from bis(trifluorovinyloxy)biphenyl (TFVE), perfluorocyclohexene (PFCH), and perfluoro acyclic monomers, namely, perfluoro(4-methyl-2-pentene) and 1-perfluoroheptene to undergo this chemistry.

This work is divided into four parts based on the polymerization methodology.

The first …

Synthesis Of Conjugated Polymers From Xanthene And Alkenyl Flanked Diketopyrrolopyrrole Monomers For High-Performance Electronic Applications., Ranganath Wijesinghe Wahalathantrige Don

Theses and Dissertations

In traditional electronics, inorganic materials such as silicon and germanium are used as semiconductors due to their outstanding semiconducting properties. Unfortunately, inorganic materials are rigid due to their high crystalline nature, and processing these materials is complex and expensive. Furthermore, traditional semiconducting materials do not have favorable mechanical properties in applications such as wearable devices and large-area applications with complicated shapes. Conjugated conducting polymers (CCPs) are being explored as alternative materials to conventional semiconductors due to their mechanical properties and high conductivity. CCPs offer properties such as solution and low-temperature processability, flexibility, thermal and optical properties that traditional semiconductors could …

Synthesis And Characterization Of Sustainable And Biobased Copolymers From Lignocellulosic, Guery Saenz

Theses and Dissertations

Natural compounds have been the primary resource used to produce polymeric materials by humankind since the mid-1900s. Yet, progress in bio-based polymers from renewable feedstock has encountered some obstacles, mainly due to the low prices of petroleum-based monomers, compared to natural and sustainable materials. However, most commodity plastics are non-degradable materials, and solid plastic waste accumulation adversely affects the environment. As the world population is growing and demanding chemicals, energy, and plastics materials, polymer research is focusing on synthesizing bio-based and degradable polymers. Thus, biomass, a sustainable and inexpensive feedstock, is highly appropriate for designing alternative thermoplastics that are degradable …

Functional Material Systems For Stimuli-Responsive Interference Coloration, Milad Momtaz

Theses and Dissertations

Part I: Responsive Interference Coloration (RIC) Systems for High-Performance Humidity Sensing

High-humidity conditions (85−100% relative humidity) have a variety of effects on many aspects of our daily lives. In spite of significant progress in the development of structural coloration-based humidity sensors, enhancing the sensitivity and visual humidity resolution of these sensors at high-humidity environment remains a big challenge. In this work, high-performance colorimetric humidity sensors based on environment-friendly konjac glucomannan (KGM) are introduced. These sensors are fabricated via thin-film interference and prepared using a simple, affordable, and scalable method. An effective approach is shown for markedly improving the sensitivity and …

A Study In Molecular Recognition: Synthesis Of A Β-Sheet Mimic & Quantitation Of Metal Ions In Aqueous Solutions Through Solid Supported Semi-Selective Chemosensors, Tyler G. Fenske

Theses and Dissertations

From the hydrophobic effect, which is responsible for the organization of amphipathic molecules into cellular membranes, to the highly specific hydrogen binding patterns found in DNA base pairs that keeps our genetic material “zipped up”, non-covalent and reversible interactions are critical to properly functioning biological processes. Molecular recognition is an area of study that seeks to better understand these observed phenomena. In a general sense, association of “Host” and “Guest” molecules are based on ionic forces, hydrophobic interactions, cation-π effects, π-π stacking, conformational restriction, and many others. This dissertation will primarily focus on two projects that have an emphasis on …

Active Polymeric Materials For 3d Shaping And Sensing, Adebola Oyefusi

Theses and Dissertations

Part I: Reprogrammable Chemical 3D Shaping for Origami, Kirigami, and Reconfigurable Molding

Origami- and kirigami-based design principles have recently received strong interest from the scientific and engineering communities because they offer fresh approaches to engineering of structural hierarchy and adaptive functions in materials, which could lead to many promising applications. Herein, we present a reprogrammable 3D chemical shaping strategy for creating a wide variety of stable complex origami and kirigami structures autonomously. This strategy relies on a reverse patterning method that encodes prescribed 3D geometric information as a spatial pattern of the unlocked phase (dispersed phase) in the locked phase …

New Approaches To Multi-Functional Soft Materials, Seyedali Banisadr

Theses and Dissertations

Soft robotics is a relatively new, but fast-developing field of science and technology that utilizes soft materials such as polymers in their body structure. Despite significant progress in soft robotic devices, robots that can sense their environments are still very rare. Although some soft robots have exhibited sensing capabilities, they still have not demonstrated synergistic coupling of sensing and actuation. From our perspective, this type of coupling may take us one step closer to fabricate soft robots with autonomous feedback dynamics. In this work, we present new approaches to soft robotic devices, which are fabricated from responsive soft materials and …

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema

Theses and Dissertations

The use of porous sorbents for physisorptive capture of CO₂ from gas mixtures has been deemed attractive due to the low energy penalty associated with recycling of such materials. Porous organic polymers (POPs) have emerged as promising candidates with potential in the treatment of pre- and post- fuel combustion processes to separate CO₂ from gas mixtures. Concurrently, significant advances have been made in establishing calculation methods that evaluate the practicality of porous sorbents for targeted gas separation applications. However, these methods rely on single gas adsorption isotherms without accounting for the dynamic gas mixtures encountered in real-life applications. …

Exploring The Effects Of Different Classroom Environments On The Learning Process. Synthesis Of Thiazole-Linked Porous Organic Polymers For Co2 Separation And Nitro-Aromatics Sensing., Davide D'Urbino

Theses and Dissertations

When attempting to study the learning process of undergraduate chemistry student, the classroom and any interaction that take place within it constitute the social context of interest. By studying how different approaches can foster different classroom environments, it is possible to approach course design from an informed and scientifically sound perspective. Thus, it becomes necessary to identify and quantify the factors that have a positive or negative effect on the classroom environment. Social comparison concerns, comfort levels and self-efficacy have been shown to be social factors that affect each other as well as the learning process and have therefore been …

Synthesis And Performance Analysis Of Polyurethane Foam Nanocomposite For Arsenic Removal From Drinking Water, Faten Bakri Hussein

Theses and Dissertations

Water contamination by various heavy metal pollutants such as, Lead, Arsenic, Cadmium, and Mercury, have severe toxic effects on living organisms and humans. High concentrations of arsenic in drinking water cause serious damage to the central and peripheral nervous systems, as well as, the dermal, cardiovascular, gastrointestinal, and respiratory systems. Arsenic contamination of ground water poses a substantial concern in many countries throughout the world, including the United States.

Considerable research work, aimed at finding and developing various separation and treatment techniques, has been conducted over the past few decades. The conventional treatment methods of arsenic involve coagulation with ferric …

Fabrication Of Multifunctional Nanostructured Porous Materials, Ahmed A. Farghaly

Theses and Dissertations

Nanostructured porous materials generally, and nanoporous noble metals specifically, have received considerable attention due to their superior chemical and physical properties over nanoparticles and bulk counterparts. This dissertation work aims to develop well-established strategies for the preparation of multifunctional nanostructured porous materials based on the combination of inorganic-chemistry, organic-chemistry and electrochemistry. The preparation strategies involved one or more of the following processes: sol-gel synthesis, co-electrodeposition, metal ions reduction, electropolymerization and dealloying or chemical etching. The study did not stop at the preparation limits but extended to investigate the reaction mechanism behind the formation of these multifunctional nanoporous structures in order …

Systematic Postsynthetic Modification Of Nanoporous Organic Frameworks And Their Performance Evaluation For Selective Co2 Capture, Timur Islamoglu

Theses and Dissertations

Porous organic polymers (POPs) with high physicochemical stability have attracted significant attention from the scientific community as promising platforms for small gas separation adsorbents. Although POPs have amorphous morphology in general, with the help of organic chemistry toolbox, ultrahigh surface area materials can be synthesized. In particular, nitrogen-rich POPs have been studied intensively due to their enhanced framework-CO₂ interactions. Postsynthetic modification (PSM) of POPs has been instrumental for incorporating different functional groups into the pores of POPs which would increase the CO₂ capture properties. We have shown that functionalizing the surface of POPs with nitro and amine groups …

Diazaborole Linked Porous Polymers: Design, Synthesis, And Application To Gas Storage And Separation, Zafer Kahveci

Theses and Dissertations

The synthesis of highly porous organic polymers with predefined porosity has attracted considerable attention due to their potential in a wide range of applications. Porous organic polymers (POPs) offer novel properties such as permanent porosity, adjustable chemical nature, and noteworthy thermal and chemical stability. These remarkable properties of the POPs make them promising candidates for use in gas separation and storage. The emission of carbon dioxide (CO₂) from fossil fuel combustion is a major cause of global warming. Finding an efficient separation and/or storage material is essential for creating a cleaner environment. Therefore, the importance of the POPs …

Changes To Electrical Conductivity In Irradiated Carbon-Nickel Nanocomposites, David F. Coy

Theses and Dissertations

Pre and post irradiation resistivity and XAFS measurements have been conducted to examine the effects of 0.5 MeV electron irradiations on nickel-carbon composites. Results showed a decrease in surface resistivity in all sample types of 14-30% following irradiation with a total electron exposure of 4 x 10^-16 cm^-2. Results also showed a corresponding decrease in NiO content for the irradiated samples as compared to measurements of non-irradiated samples. Surface resistivity measurement capabilities were established and measurement techniques refined to produce repeatable results of sufficient precision to discern changes in resistivity for an exposure of 2 x 10 …