Chemistry Commons^™

Theory And Improved Methods For Probing The Cavitation To Fracture Transition, Christopher Barney

Doctoral Dissertations

A material is considered soft when its bulk modulus is significantly greater than its shear modulus. Rubbery polymers are a class of soft materials where resistance to extension is mainly entropic in nature. Polymeric soft solids differ from liquids due to the presence of a percolated network of strong bonds that resist deformation and flow on a given time scale. The incompressible nature, entropically driven elasticity, and molecular scale network structure of soft polymeric solids combine to impart unique mechanical behavior that often results in complex material responses to simple loading situations. An important example of this is cavitation in …

Rheological Studies Of Fully-Formulated Coatings Thickened With Heur: Effects Of Surfactants, Brandon M. Bonilla

Master's Theses

Rheology modifiers such as hydrophobically-modified ethoxylated urethane (HEUR)thickeners are included in waterborne latex coatings to optimize shear-rate dependent viscosity and other rheological properties. While these HEUR polymers are commonly used in industry, the complex chemical interactions that contribute to rheological properties are still not completely understood. Prior work in this area has focused on understanding latex-HEUR and latex-surfactant-HEUR interactions that affect rheological properties. Additionally, studies have been previously conducted to understand the relaxation mechanisms of complex interactions present in HEUR-thickened waterborne latex coatings under various dynamic conditions. The objective of this work is to extend the experimental work to fully-formulated …

Determining Particle Size Of Polymeric Micelles In Thermothickening Aqueous Solutions, Jessica Diane Bruer

MSU Graduate Theses

Many active pharmaceutical ingredients (APIs) are poorly soluble and cause inadequate drug absorption. Soluplus^®, a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer, is a commercial excipient (BASF Corp) that enhances the solubility and bioavailability of many APIs. The mechanism of enhancement is related to the ability to form polymeric micelles in solution. These micelles store insoluble APIs in their hydrophobic interior and transport them to targeted sites in the body. An important characteristic of solubility enhancers is the particle size exhibited in solution before and after loading with APIs. This is most commonly determined by dynamic light scattering (DLS) …

Rheological Investigations Of Latex-Surfactant-Associative Thickener Aqueous Systems, Bishop I. Hammack

Master's Theses

Surfactants and Thickeners are both additives used in fully-formulated waterborne coatings to provide colloidal stability, thickening, and other functionality. The behavior of each ingredient in a coating must be understood and controlled to maintain colloidal stability as well as balance other desired properties of the liquid coating and the dry paint film. In this work, quaternary systems of Water-Latex-Thickener-Surfactant were investigated to further the understanding of their behavior in coatings. The thickener used was a well characterized, hydrophobically-modified, ethoxylated urethane (HEUR) with two C18 terminal hydrophobes and 795 average repeat units of ethylene oxide as the hydrophilic spacer. Two latexes, …

Method Development To Quantify The Reinforcing Properties Of Silica Fillers, Hamid Reza Givehchi

Electronic Theses & Dissertations

Polysiloxane polymers are widely used as a high-temperature resistant materials with the ability to maintain flexibility at extremely low temperatures. Unfortunately, polysiloxane elastomers generally exhibit low strength and poor mechanical properties and have no practical use unless they are reinforced. These elastomers can be mechanically improved through the use of reinforcing silica-based fillers. It is known that silanol groups on the surface of silica filler particles can interact with the polysiloxane backbone. Interactions of silanol groups on the fillers’ surfaces with the polysiloxane backbone through hydrogen bonding may hinder the mobility of the polymer chain and can improve thermal, physical, …

Unexpected Effects Of Inorganic Phosphate Glass On Crystallization And Thermo-Rheological Behavior Of Polyethylene Terephthalate, Kyoungtae Kim, Shahab Kashani Rahimi, Todd M. Alam, Eric G. Sorte, Joshua U. Otaigbe

Faculty Publications

The effects of ultra-low glass transition temperature (T_g) phosphate glass (Pglass) on the thermal, morphological, rheological, mechanical, and crystallization properties of hybrid Pglass/poly(eththylene terephthalate)(PET) were investigated. Nano- and micro-scale distribution of the Pglass in the PET polymer matrix was observed. The polydispersed Pglass in the PET matrix functioned as a nucleation agent, resulting in increasing crystallization temperature. The Pglass in the PET matrix decreased the T_g, indicating a plasticizing effect of the Pglass in the hybrids that was confirmed by the significantly decreased complex viscosity of the PET matrix. In addition, with increasing temperature, a non-terminal …

Characterization Of Nylon-12 In A Novel Additive Manufacturing Technology, And The Rheological And Spectroscopic Analysis Of Peg-Starch Matrix Interactions, Garrett Michael Craft

USF Tampa Graduate Theses and Dissertations

In this work differential scanning calorimetry, dynamic mechanical analysis, Fourier-Transformed Infrared Spectroscopy [FT-IR] and polarized light microscopy will be employed to characterize polymeric systems. The first chapter broadly covers polymer synthesis and important characterization methods.

In the second chapter, a polyamide (PA12) will be sintered via a novel additive manufacturing (AM) technology developed here at USF termed LAPS (Large Area Projection Sintering). LAPS uses extended sintering timespans to ensure complete melting and densification of the polymer powder over the entire two-dimensional area of the part’s footprint. Further, it allows for the printed layer to crystallize and shrink in its entirety …

Hybrid Micellar Network Hydrogels Of Thermosensitive Hydrophilic Triblock Copolymers And Thermosensitive Hairy Nanoparticles, Bin Hu

Doctoral Dissertations

Hybrid micellar network hydrogels, composed of thermosensitive hydrophilic triblock copolymers and thermosensitive polymer brush-grafted nanoparticles (hairy NPs), exhibit intriguing rheological properties. This dissertation work studies thermosensitive hybrid hydrogels with NPs positioned either inside or outside the core of block copolymer micelles.

Chapter 1 is an introduction. Chapter 2 examines the effect of NP’s location on properties of hybrid hydrogels of a thermosensitive ABA triblock copolymer and hairy NPs. Two batches of thermoresponsive polymer brush-grafted silica NPs and an ABA triblock copolymer with thermosensitive outer blocks were prepared. When the lower critical solution temperature (LCST) of hairy NPs was similar to …

Phase Behavior And Rheology Of Latex, Thickener, Surfactant Mixtures And Liquid Crystal Based Compositions For Printing High-Efficiency Flexible Electronics, Franceska Anna Santos

Master's Theses

This project consists of two parts. One area of focus in the first part is understanding the interactions between a non-ionic, block copolymer type dispersant and hydrophobically-modified, ethoxylated urethane (HEUR) associative thickeners in water. The dispersant was mixed at various concentrations (0-2% by weight) with HEUR thickeners at 1% by weight concentration in the aqueous medium. This study is an integral part of our attempts to determine mechanisms of viscosity drop when colorant dispersions are added to latex tint base formulations thickened with associative thickeners. One of the HEUR thickeners is a product that has been available for over three …

The Effects Of Color Concentrates On The Rheology Of Tint Bases, Doug James Herrick

Master's Theses

ABSTRACT

THE EFFECTS OF COLOR CONCENTRATES ON THE RHEOLOGY OF TINT BASES

Douglas James Herrick

Waterborne coatings are formulated with a number of different ingredients; water, latex polymers, pigments, surfactants, dispersants, defoamers, biocides, coalescing aids, and rheology modifiers or thickeners. Rheology modifiers are necessary in order to improve the physical properties of the coating before, during, and after application to a substrate. There are two kinds of rheology modifiers used in waterborne coatings; associative thickeners and non-associative thickeners. Coatings formulated with associative thickeners are quite sensitive to coating variations; the slightest change in the formulation has profound effects on the …